mirror of https://gitee.com/openkylin/linux.git
2765 lines
76 KiB
C
2765 lines
76 KiB
C
/*
|
|
* IDE ATAPI streaming tape driver.
|
|
*
|
|
* Copyright (C) 1995-1999 Gadi Oxman <gadio@netvision.net.il>
|
|
* Copyright (C) 2003-2005 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* This driver was constructed as a student project in the software laboratory
|
|
* of the faculty of electrical engineering in the Technion - Israel's
|
|
* Institute Of Technology, with the guide of Avner Lottem and Dr. Ilana David.
|
|
*
|
|
* It is hereby placed under the terms of the GNU general public license.
|
|
* (See linux/COPYING).
|
|
*
|
|
* For a historical changelog see
|
|
* Documentation/ide/ChangeLog.ide-tape.1995-2002
|
|
*/
|
|
|
|
#define IDETAPE_VERSION "1.20"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/major.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/mutex.h>
|
|
#include <scsi/scsi.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/io.h>
|
|
#include <asm/unaligned.h>
|
|
#include <linux/mtio.h>
|
|
|
|
enum {
|
|
/* output errors only */
|
|
DBG_ERR = (1 << 0),
|
|
/* output all sense key/asc */
|
|
DBG_SENSE = (1 << 1),
|
|
/* info regarding all chrdev-related procedures */
|
|
DBG_CHRDEV = (1 << 2),
|
|
/* all remaining procedures */
|
|
DBG_PROCS = (1 << 3),
|
|
/* buffer alloc info (pc_stack & rq_stack) */
|
|
DBG_PCRQ_STACK = (1 << 4),
|
|
};
|
|
|
|
/* define to see debug info */
|
|
#define IDETAPE_DEBUG_LOG 0
|
|
|
|
#if IDETAPE_DEBUG_LOG
|
|
#define debug_log(lvl, fmt, args...) \
|
|
{ \
|
|
if (tape->debug_mask & lvl) \
|
|
printk(KERN_INFO "ide-tape: " fmt, ## args); \
|
|
}
|
|
#else
|
|
#define debug_log(lvl, fmt, args...) do {} while (0)
|
|
#endif
|
|
|
|
/**************************** Tunable parameters *****************************/
|
|
/*
|
|
* After each failed packet command we issue a request sense command and retry
|
|
* the packet command IDETAPE_MAX_PC_RETRIES times.
|
|
*
|
|
* Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries.
|
|
*/
|
|
#define IDETAPE_MAX_PC_RETRIES 3
|
|
|
|
/*
|
|
* With each packet command, we allocate a buffer of IDETAPE_PC_BUFFER_SIZE
|
|
* bytes. This is used for several packet commands (Not for READ/WRITE commands)
|
|
*/
|
|
#define IDETAPE_PC_BUFFER_SIZE 256
|
|
|
|
/*
|
|
* In various places in the driver, we need to allocate storage
|
|
* for packet commands and requests, which will remain valid while
|
|
* we leave the driver to wait for an interrupt or a timeout event.
|
|
*/
|
|
#define IDETAPE_PC_STACK (10 + IDETAPE_MAX_PC_RETRIES)
|
|
|
|
/*
|
|
* Some drives (for example, Seagate STT3401A Travan) require a very long
|
|
* timeout, because they don't return an interrupt or clear their busy bit
|
|
* until after the command completes (even retension commands).
|
|
*/
|
|
#define IDETAPE_WAIT_CMD (900*HZ)
|
|
|
|
/*
|
|
* The following parameter is used to select the point in the internal tape fifo
|
|
* in which we will start to refill the buffer. Decreasing the following
|
|
* parameter will improve the system's latency and interactive response, while
|
|
* using a high value might improve system throughput.
|
|
*/
|
|
#define IDETAPE_FIFO_THRESHOLD 2
|
|
|
|
/*
|
|
* DSC polling parameters.
|
|
*
|
|
* Polling for DSC (a single bit in the status register) is a very important
|
|
* function in ide-tape. There are two cases in which we poll for DSC:
|
|
*
|
|
* 1. Before a read/write packet command, to ensure that we can transfer data
|
|
* from/to the tape's data buffers, without causing an actual media access.
|
|
* In case the tape is not ready yet, we take out our request from the device
|
|
* request queue, so that ide.c could service requests from the other device
|
|
* on the same interface in the meantime.
|
|
*
|
|
* 2. After the successful initialization of a "media access packet command",
|
|
* which is a command that can take a long time to complete (the interval can
|
|
* range from several seconds to even an hour). Again, we postpone our request
|
|
* in the middle to free the bus for the other device. The polling frequency
|
|
* here should be lower than the read/write frequency since those media access
|
|
* commands are slow. We start from a "fast" frequency - IDETAPE_DSC_MA_FAST
|
|
* (1 second), and if we don't receive DSC after IDETAPE_DSC_MA_THRESHOLD
|
|
* (5 min), we switch it to a lower frequency - IDETAPE_DSC_MA_SLOW (1 min).
|
|
*
|
|
* We also set a timeout for the timer, in case something goes wrong. The
|
|
* timeout should be longer then the maximum execution time of a tape operation.
|
|
*/
|
|
|
|
/* DSC timings. */
|
|
#define IDETAPE_DSC_RW_MIN 5*HZ/100 /* 50 msec */
|
|
#define IDETAPE_DSC_RW_MAX 40*HZ/100 /* 400 msec */
|
|
#define IDETAPE_DSC_RW_TIMEOUT 2*60*HZ /* 2 minutes */
|
|
#define IDETAPE_DSC_MA_FAST 2*HZ /* 2 seconds */
|
|
#define IDETAPE_DSC_MA_THRESHOLD 5*60*HZ /* 5 minutes */
|
|
#define IDETAPE_DSC_MA_SLOW 30*HZ /* 30 seconds */
|
|
#define IDETAPE_DSC_MA_TIMEOUT 2*60*60*HZ /* 2 hours */
|
|
|
|
/*************************** End of tunable parameters ***********************/
|
|
|
|
/* tape directions */
|
|
enum {
|
|
IDETAPE_DIR_NONE = (1 << 0),
|
|
IDETAPE_DIR_READ = (1 << 1),
|
|
IDETAPE_DIR_WRITE = (1 << 2),
|
|
};
|
|
|
|
struct idetape_bh {
|
|
u32 b_size;
|
|
atomic_t b_count;
|
|
struct idetape_bh *b_reqnext;
|
|
char *b_data;
|
|
};
|
|
|
|
/* Tape door status */
|
|
#define DOOR_UNLOCKED 0
|
|
#define DOOR_LOCKED 1
|
|
#define DOOR_EXPLICITLY_LOCKED 2
|
|
|
|
/* Some defines for the SPACE command */
|
|
#define IDETAPE_SPACE_OVER_FILEMARK 1
|
|
#define IDETAPE_SPACE_TO_EOD 3
|
|
|
|
/* Some defines for the LOAD UNLOAD command */
|
|
#define IDETAPE_LU_LOAD_MASK 1
|
|
#define IDETAPE_LU_RETENSION_MASK 2
|
|
#define IDETAPE_LU_EOT_MASK 4
|
|
|
|
/*
|
|
* Special requests for our block device strategy routine.
|
|
*
|
|
* In order to service a character device command, we add special requests to
|
|
* the tail of our block device request queue and wait for their completion.
|
|
*/
|
|
|
|
enum {
|
|
REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
|
|
REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
|
|
REQ_IDETAPE_READ = (1 << 2),
|
|
REQ_IDETAPE_WRITE = (1 << 3),
|
|
};
|
|
|
|
/* Error codes returned in rq->errors to the higher part of the driver. */
|
|
#define IDETAPE_ERROR_GENERAL 101
|
|
#define IDETAPE_ERROR_FILEMARK 102
|
|
#define IDETAPE_ERROR_EOD 103
|
|
|
|
/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
|
|
#define IDETAPE_BLOCK_DESCRIPTOR 0
|
|
#define IDETAPE_CAPABILITIES_PAGE 0x2a
|
|
|
|
/* Tape flag bits values. */
|
|
enum {
|
|
IDETAPE_FLAG_IGNORE_DSC = (1 << 0),
|
|
/* 0 When the tape position is unknown */
|
|
IDETAPE_FLAG_ADDRESS_VALID = (1 << 1),
|
|
/* Device already opened */
|
|
IDETAPE_FLAG_BUSY = (1 << 2),
|
|
/* Attempt to auto-detect the current user block size */
|
|
IDETAPE_FLAG_DETECT_BS = (1 << 3),
|
|
/* Currently on a filemark */
|
|
IDETAPE_FLAG_FILEMARK = (1 << 4),
|
|
/* DRQ interrupt device */
|
|
IDETAPE_FLAG_DRQ_INTERRUPT = (1 << 5),
|
|
/* 0 = no tape is loaded, so we don't rewind after ejecting */
|
|
IDETAPE_FLAG_MEDIUM_PRESENT = (1 << 6),
|
|
};
|
|
|
|
/*
|
|
* Most of our global data which we need to save even as we leave the driver due
|
|
* to an interrupt or a timer event is stored in the struct defined below.
|
|
*/
|
|
typedef struct ide_tape_obj {
|
|
ide_drive_t *drive;
|
|
ide_driver_t *driver;
|
|
struct gendisk *disk;
|
|
struct kref kref;
|
|
|
|
/*
|
|
* Since a typical character device operation requires more
|
|
* than one packet command, we provide here enough memory
|
|
* for the maximum of interconnected packet commands.
|
|
* The packet commands are stored in the circular array pc_stack.
|
|
* pc_stack_index points to the last used entry, and warps around
|
|
* to the start when we get to the last array entry.
|
|
*
|
|
* pc points to the current processed packet command.
|
|
*
|
|
* failed_pc points to the last failed packet command, or contains
|
|
* NULL if we do not need to retry any packet command. This is
|
|
* required since an additional packet command is needed before the
|
|
* retry, to get detailed information on what went wrong.
|
|
*/
|
|
/* Current packet command */
|
|
struct ide_atapi_pc *pc;
|
|
/* Last failed packet command */
|
|
struct ide_atapi_pc *failed_pc;
|
|
/* Packet command stack */
|
|
struct ide_atapi_pc pc_stack[IDETAPE_PC_STACK];
|
|
/* Next free packet command storage space */
|
|
int pc_stack_index;
|
|
struct request rq_stack[IDETAPE_PC_STACK];
|
|
/* We implement a circular array */
|
|
int rq_stack_index;
|
|
|
|
/*
|
|
* DSC polling variables.
|
|
*
|
|
* While polling for DSC we use postponed_rq to postpone the current
|
|
* request so that ide.c will be able to service pending requests on the
|
|
* other device. Note that at most we will have only one DSC (usually
|
|
* data transfer) request in the device request queue.
|
|
*/
|
|
struct request *postponed_rq;
|
|
/* The time in which we started polling for DSC */
|
|
unsigned long dsc_polling_start;
|
|
/* Timer used to poll for dsc */
|
|
struct timer_list dsc_timer;
|
|
/* Read/Write dsc polling frequency */
|
|
unsigned long best_dsc_rw_freq;
|
|
unsigned long dsc_poll_freq;
|
|
unsigned long dsc_timeout;
|
|
|
|
/* Read position information */
|
|
u8 partition;
|
|
/* Current block */
|
|
unsigned int first_frame;
|
|
|
|
/* Last error information */
|
|
u8 sense_key, asc, ascq;
|
|
|
|
/* Character device operation */
|
|
unsigned int minor;
|
|
/* device name */
|
|
char name[4];
|
|
/* Current character device data transfer direction */
|
|
u8 chrdev_dir;
|
|
|
|
/* tape block size, usually 512 or 1024 bytes */
|
|
unsigned short blk_size;
|
|
int user_bs_factor;
|
|
|
|
/* Copy of the tape's Capabilities and Mechanical Page */
|
|
u8 caps[20];
|
|
|
|
/*
|
|
* Active data transfer request parameters.
|
|
*
|
|
* At most, there is only one ide-tape originated data transfer request
|
|
* in the device request queue. This allows ide.c to easily service
|
|
* requests from the other device when we postpone our active request.
|
|
*/
|
|
|
|
/* Data buffer size chosen based on the tape's recommendation */
|
|
int buffer_size;
|
|
/* merge buffer */
|
|
struct idetape_bh *merge_bh;
|
|
/* size of the merge buffer */
|
|
int merge_bh_size;
|
|
/* pointer to current buffer head within the merge buffer */
|
|
struct idetape_bh *bh;
|
|
char *b_data;
|
|
int b_count;
|
|
|
|
int pages_per_buffer;
|
|
/* Wasted space in each stage */
|
|
int excess_bh_size;
|
|
|
|
/* Status/Action flags: long for set_bit */
|
|
unsigned long flags;
|
|
/* protects the ide-tape queue */
|
|
spinlock_t lock;
|
|
|
|
/* Measures average tape speed */
|
|
unsigned long avg_time;
|
|
int avg_size;
|
|
int avg_speed;
|
|
|
|
/* the door is currently locked */
|
|
int door_locked;
|
|
/* the tape hardware is write protected */
|
|
char drv_write_prot;
|
|
/* the tape is write protected (hardware or opened as read-only) */
|
|
char write_prot;
|
|
|
|
u32 debug_mask;
|
|
} idetape_tape_t;
|
|
|
|
static DEFINE_MUTEX(idetape_ref_mutex);
|
|
|
|
static struct class *idetape_sysfs_class;
|
|
|
|
#define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref)
|
|
|
|
#define ide_tape_g(disk) \
|
|
container_of((disk)->private_data, struct ide_tape_obj, driver)
|
|
|
|
static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
|
|
{
|
|
struct ide_tape_obj *tape = NULL;
|
|
|
|
mutex_lock(&idetape_ref_mutex);
|
|
tape = ide_tape_g(disk);
|
|
if (tape)
|
|
kref_get(&tape->kref);
|
|
mutex_unlock(&idetape_ref_mutex);
|
|
return tape;
|
|
}
|
|
|
|
static void ide_tape_release(struct kref *);
|
|
|
|
static void ide_tape_put(struct ide_tape_obj *tape)
|
|
{
|
|
mutex_lock(&idetape_ref_mutex);
|
|
kref_put(&tape->kref, ide_tape_release);
|
|
mutex_unlock(&idetape_ref_mutex);
|
|
}
|
|
|
|
/*
|
|
* The variables below are used for the character device interface. Additional
|
|
* state variables are defined in our ide_drive_t structure.
|
|
*/
|
|
static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
|
|
|
|
#define ide_tape_f(file) ((file)->private_data)
|
|
|
|
static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
|
|
{
|
|
struct ide_tape_obj *tape = NULL;
|
|
|
|
mutex_lock(&idetape_ref_mutex);
|
|
tape = idetape_devs[i];
|
|
if (tape)
|
|
kref_get(&tape->kref);
|
|
mutex_unlock(&idetape_ref_mutex);
|
|
return tape;
|
|
}
|
|
|
|
static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
|
|
unsigned int bcount)
|
|
{
|
|
struct idetape_bh *bh = pc->bh;
|
|
int count;
|
|
|
|
while (bcount) {
|
|
if (bh == NULL) {
|
|
printk(KERN_ERR "ide-tape: bh == NULL in "
|
|
"idetape_input_buffers\n");
|
|
ide_pad_transfer(drive, 0, bcount);
|
|
return;
|
|
}
|
|
count = min(
|
|
(unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
|
|
bcount);
|
|
drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data +
|
|
atomic_read(&bh->b_count), count);
|
|
bcount -= count;
|
|
atomic_add(count, &bh->b_count);
|
|
if (atomic_read(&bh->b_count) == bh->b_size) {
|
|
bh = bh->b_reqnext;
|
|
if (bh)
|
|
atomic_set(&bh->b_count, 0);
|
|
}
|
|
}
|
|
pc->bh = bh;
|
|
}
|
|
|
|
static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
|
|
unsigned int bcount)
|
|
{
|
|
struct idetape_bh *bh = pc->bh;
|
|
int count;
|
|
|
|
while (bcount) {
|
|
if (bh == NULL) {
|
|
printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
count = min((unsigned int)pc->b_count, (unsigned int)bcount);
|
|
drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count);
|
|
bcount -= count;
|
|
pc->b_data += count;
|
|
pc->b_count -= count;
|
|
if (!pc->b_count) {
|
|
bh = bh->b_reqnext;
|
|
pc->bh = bh;
|
|
if (bh) {
|
|
pc->b_data = bh->b_data;
|
|
pc->b_count = atomic_read(&bh->b_count);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc)
|
|
{
|
|
struct idetape_bh *bh = pc->bh;
|
|
int count;
|
|
unsigned int bcount = pc->xferred;
|
|
|
|
if (pc->flags & PC_FLAG_WRITING)
|
|
return;
|
|
while (bcount) {
|
|
if (bh == NULL) {
|
|
printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
count = min((unsigned int)bh->b_size, (unsigned int)bcount);
|
|
atomic_set(&bh->b_count, count);
|
|
if (atomic_read(&bh->b_count) == bh->b_size)
|
|
bh = bh->b_reqnext;
|
|
bcount -= count;
|
|
}
|
|
pc->bh = bh;
|
|
}
|
|
|
|
/*
|
|
* idetape_next_pc_storage returns a pointer to a place in which we can
|
|
* safely store a packet command, even though we intend to leave the
|
|
* driver. A storage space for a maximum of IDETAPE_PC_STACK packet
|
|
* commands is allocated at initialization time.
|
|
*/
|
|
static struct ide_atapi_pc *idetape_next_pc_storage(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
|
|
|
|
if (tape->pc_stack_index == IDETAPE_PC_STACK)
|
|
tape->pc_stack_index = 0;
|
|
return (&tape->pc_stack[tape->pc_stack_index++]);
|
|
}
|
|
|
|
/*
|
|
* idetape_next_rq_storage is used along with idetape_next_pc_storage.
|
|
* Since we queue packet commands in the request queue, we need to
|
|
* allocate a request, along with the allocation of a packet command.
|
|
*/
|
|
|
|
/**************************************************************
|
|
* *
|
|
* This should get fixed to use kmalloc(.., GFP_ATOMIC) *
|
|
* followed later on by kfree(). -ml *
|
|
* *
|
|
**************************************************************/
|
|
|
|
static struct request *idetape_next_rq_storage(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index);
|
|
|
|
if (tape->rq_stack_index == IDETAPE_PC_STACK)
|
|
tape->rq_stack_index = 0;
|
|
return (&tape->rq_stack[tape->rq_stack_index++]);
|
|
}
|
|
|
|
/*
|
|
* called on each failed packet command retry to analyze the request sense. We
|
|
* currently do not utilize this information.
|
|
*/
|
|
static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc *pc = tape->failed_pc;
|
|
|
|
tape->sense_key = sense[2] & 0xF;
|
|
tape->asc = sense[12];
|
|
tape->ascq = sense[13];
|
|
|
|
debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
|
|
pc->c[0], tape->sense_key, tape->asc, tape->ascq);
|
|
|
|
/* Correct pc->xferred by asking the tape. */
|
|
if (pc->flags & PC_FLAG_DMA_ERROR) {
|
|
pc->xferred = pc->req_xfer -
|
|
tape->blk_size *
|
|
get_unaligned_be32(&sense[3]);
|
|
idetape_update_buffers(drive, pc);
|
|
}
|
|
|
|
/*
|
|
* If error was the result of a zero-length read or write command,
|
|
* with sense key=5, asc=0x22, ascq=0, let it slide. Some drives
|
|
* (i.e. Seagate STT3401A Travan) don't support 0-length read/writes.
|
|
*/
|
|
if ((pc->c[0] == READ_6 || pc->c[0] == WRITE_6)
|
|
/* length == 0 */
|
|
&& pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) {
|
|
if (tape->sense_key == 5) {
|
|
/* don't report an error, everything's ok */
|
|
pc->error = 0;
|
|
/* don't retry read/write */
|
|
pc->flags |= PC_FLAG_ABORT;
|
|
}
|
|
}
|
|
if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
|
|
pc->error = IDETAPE_ERROR_FILEMARK;
|
|
pc->flags |= PC_FLAG_ABORT;
|
|
}
|
|
if (pc->c[0] == WRITE_6) {
|
|
if ((sense[2] & 0x40) || (tape->sense_key == 0xd
|
|
&& tape->asc == 0x0 && tape->ascq == 0x2)) {
|
|
pc->error = IDETAPE_ERROR_EOD;
|
|
pc->flags |= PC_FLAG_ABORT;
|
|
}
|
|
}
|
|
if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
|
|
if (tape->sense_key == 8) {
|
|
pc->error = IDETAPE_ERROR_EOD;
|
|
pc->flags |= PC_FLAG_ABORT;
|
|
}
|
|
if (!(pc->flags & PC_FLAG_ABORT) &&
|
|
pc->xferred)
|
|
pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
|
|
}
|
|
}
|
|
|
|
/* Free data buffers completely. */
|
|
static void ide_tape_kfree_buffer(idetape_tape_t *tape)
|
|
{
|
|
struct idetape_bh *prev_bh, *bh = tape->merge_bh;
|
|
|
|
while (bh) {
|
|
u32 size = bh->b_size;
|
|
|
|
while (size) {
|
|
unsigned int order = fls(size >> PAGE_SHIFT)-1;
|
|
|
|
if (bh->b_data)
|
|
free_pages((unsigned long)bh->b_data, order);
|
|
|
|
size &= (order-1);
|
|
bh->b_data += (1 << order) * PAGE_SIZE;
|
|
}
|
|
prev_bh = bh;
|
|
bh = bh->b_reqnext;
|
|
kfree(prev_bh);
|
|
}
|
|
kfree(tape->merge_bh);
|
|
}
|
|
|
|
static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
|
|
{
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
unsigned long flags;
|
|
int error;
|
|
|
|
debug_log(DBG_PROCS, "Enter %s\n", __func__);
|
|
|
|
switch (uptodate) {
|
|
case 0: error = IDETAPE_ERROR_GENERAL; break;
|
|
case 1: error = 0; break;
|
|
default: error = uptodate;
|
|
}
|
|
rq->errors = error;
|
|
if (error)
|
|
tape->failed_pc = NULL;
|
|
|
|
if (!blk_special_request(rq)) {
|
|
ide_end_request(drive, uptodate, nr_sects);
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_irqsave(&tape->lock, flags);
|
|
|
|
ide_end_drive_cmd(drive, 0, 0);
|
|
|
|
spin_unlock_irqrestore(&tape->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static void ide_tape_callback(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc *pc = tape->pc;
|
|
int uptodate = pc->error ? 0 : 1;
|
|
|
|
debug_log(DBG_PROCS, "Enter %s\n", __func__);
|
|
|
|
if (tape->failed_pc == pc)
|
|
tape->failed_pc = NULL;
|
|
|
|
if (pc->c[0] == REQUEST_SENSE) {
|
|
if (uptodate)
|
|
idetape_analyze_error(drive, pc->buf);
|
|
else
|
|
printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
|
|
"itself - Aborting request!\n");
|
|
} else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
|
|
struct request *rq = drive->hwif->hwgroup->rq;
|
|
int blocks = pc->xferred / tape->blk_size;
|
|
|
|
tape->avg_size += blocks * tape->blk_size;
|
|
|
|
if (time_after_eq(jiffies, tape->avg_time + HZ)) {
|
|
tape->avg_speed = tape->avg_size * HZ /
|
|
(jiffies - tape->avg_time) / 1024;
|
|
tape->avg_size = 0;
|
|
tape->avg_time = jiffies;
|
|
}
|
|
|
|
tape->first_frame += blocks;
|
|
rq->current_nr_sectors -= blocks;
|
|
|
|
if (pc->error)
|
|
uptodate = pc->error;
|
|
} else if (pc->c[0] == READ_POSITION && uptodate) {
|
|
u8 *readpos = tape->pc->buf;
|
|
|
|
debug_log(DBG_SENSE, "BOP - %s\n",
|
|
(readpos[0] & 0x80) ? "Yes" : "No");
|
|
debug_log(DBG_SENSE, "EOP - %s\n",
|
|
(readpos[0] & 0x40) ? "Yes" : "No");
|
|
|
|
if (readpos[0] & 0x4) {
|
|
printk(KERN_INFO "ide-tape: Block location is unknown"
|
|
"to the tape\n");
|
|
clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
|
|
uptodate = 0;
|
|
} else {
|
|
debug_log(DBG_SENSE, "Block Location - %u\n",
|
|
be32_to_cpu(*(u32 *)&readpos[4]));
|
|
|
|
tape->partition = readpos[1];
|
|
tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]);
|
|
set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
|
|
}
|
|
}
|
|
|
|
idetape_end_request(drive, uptodate, 0);
|
|
}
|
|
|
|
static void idetape_init_pc(struct ide_atapi_pc *pc)
|
|
{
|
|
memset(pc->c, 0, 12);
|
|
pc->retries = 0;
|
|
pc->flags = 0;
|
|
pc->req_xfer = 0;
|
|
pc->buf = pc->pc_buf;
|
|
pc->buf_size = IDETAPE_PC_BUFFER_SIZE;
|
|
pc->bh = NULL;
|
|
pc->b_data = NULL;
|
|
pc->callback = ide_tape_callback;
|
|
}
|
|
|
|
static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = REQUEST_SENSE;
|
|
pc->c[4] = 20;
|
|
pc->req_xfer = 20;
|
|
}
|
|
|
|
static void idetape_init_rq(struct request *rq, u8 cmd)
|
|
{
|
|
blk_rq_init(NULL, rq);
|
|
rq->cmd_type = REQ_TYPE_SPECIAL;
|
|
rq->cmd[0] = cmd;
|
|
}
|
|
|
|
/*
|
|
* Generate a new packet command request in front of the request queue, before
|
|
* the current request, so that it will be processed immediately, on the next
|
|
* pass through the driver. The function below is called from the request
|
|
* handling part of the driver (the "bottom" part). Safe storage for the request
|
|
* should be allocated with ide_tape_next_{pc,rq}_storage() prior to that.
|
|
*
|
|
* Memory for those requests is pre-allocated at initialization time, and is
|
|
* limited to IDETAPE_PC_STACK requests. We assume that we have enough space for
|
|
* the maximum possible number of inter-dependent packet commands.
|
|
*
|
|
* The higher level of the driver - The ioctl handler and the character device
|
|
* handling functions should queue request to the lower level part and wait for
|
|
* their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
|
|
*/
|
|
static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
|
|
struct request *rq)
|
|
{
|
|
struct ide_tape_obj *tape = drive->driver_data;
|
|
|
|
idetape_init_rq(rq, REQ_IDETAPE_PC1);
|
|
rq->cmd_flags |= REQ_PREEMPT;
|
|
rq->buffer = (char *) pc;
|
|
rq->rq_disk = tape->disk;
|
|
ide_do_drive_cmd(drive, rq);
|
|
}
|
|
|
|
/*
|
|
* idetape_retry_pc is called when an error was detected during the
|
|
* last packet command. We queue a request sense packet command in
|
|
* the head of the request list.
|
|
*/
|
|
static void idetape_retry_pc(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc *pc;
|
|
struct request *rq;
|
|
|
|
(void)ide_read_error(drive);
|
|
pc = idetape_next_pc_storage(drive);
|
|
rq = idetape_next_rq_storage(drive);
|
|
idetape_create_request_sense_cmd(pc);
|
|
set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
|
|
idetape_queue_pc_head(drive, pc, rq);
|
|
}
|
|
|
|
/*
|
|
* Postpone the current request so that ide.c will be able to service requests
|
|
* from another device on the same hwgroup while we are polling for DSC.
|
|
*/
|
|
static void idetape_postpone_request(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
debug_log(DBG_PROCS, "Enter %s\n", __func__);
|
|
|
|
tape->postponed_rq = HWGROUP(drive)->rq;
|
|
ide_stall_queue(drive, tape->dsc_poll_freq);
|
|
}
|
|
|
|
static void ide_tape_handle_dsc(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
/* Media access command */
|
|
tape->dsc_polling_start = jiffies;
|
|
tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
|
|
tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT;
|
|
/* Allow ide.c to handle other requests */
|
|
idetape_postpone_request(drive);
|
|
}
|
|
|
|
static void ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
|
|
unsigned int bcount, int write)
|
|
{
|
|
if (write)
|
|
idetape_output_buffers(drive, pc, bcount);
|
|
else
|
|
idetape_input_buffers(drive, pc, bcount);
|
|
}
|
|
|
|
/*
|
|
* This is the usual interrupt handler which will be called during a packet
|
|
* command. We will transfer some of the data (as requested by the drive) and
|
|
* will re-point interrupt handler to us. When data transfer is finished, we
|
|
* will act according to the algorithm described before
|
|
* idetape_issue_pc.
|
|
*/
|
|
static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD,
|
|
NULL, idetape_update_buffers, idetape_retry_pc,
|
|
ide_tape_handle_dsc, ide_tape_io_buffers);
|
|
}
|
|
|
|
/*
|
|
* Packet Command Interface
|
|
*
|
|
* The current Packet Command is available in tape->pc, and will not change
|
|
* until we finish handling it. Each packet command is associated with a
|
|
* callback function that will be called when the command is finished.
|
|
*
|
|
* The handling will be done in three stages:
|
|
*
|
|
* 1. idetape_issue_pc will send the packet command to the drive, and will set
|
|
* the interrupt handler to idetape_pc_intr.
|
|
*
|
|
* 2. On each interrupt, idetape_pc_intr will be called. This step will be
|
|
* repeated until the device signals us that no more interrupts will be issued.
|
|
*
|
|
* 3. ATAPI Tape media access commands have immediate status with a delayed
|
|
* process. In case of a successful initiation of a media access packet command,
|
|
* the DSC bit will be set when the actual execution of the command is finished.
|
|
* Since the tape drive will not issue an interrupt, we have to poll for this
|
|
* event. In this case, we define the request as "low priority request" by
|
|
* setting rq_status to IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and
|
|
* exit the driver.
|
|
*
|
|
* ide.c will then give higher priority to requests which originate from the
|
|
* other device, until will change rq_status to RQ_ACTIVE.
|
|
*
|
|
* 4. When the packet command is finished, it will be checked for errors.
|
|
*
|
|
* 5. In case an error was found, we queue a request sense packet command in
|
|
* front of the request queue and retry the operation up to
|
|
* IDETAPE_MAX_PC_RETRIES times.
|
|
*
|
|
* 6. In case no error was found, or we decided to give up and not to retry
|
|
* again, the callback function will be called and then we will handle the next
|
|
* request.
|
|
*/
|
|
static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
|
|
IDETAPE_WAIT_CMD, NULL);
|
|
}
|
|
|
|
static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
if (tape->pc->c[0] == REQUEST_SENSE &&
|
|
pc->c[0] == REQUEST_SENSE) {
|
|
printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
|
|
"Two request sense in serial were issued\n");
|
|
}
|
|
|
|
if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
|
|
tape->failed_pc = pc;
|
|
/* Set the current packet command */
|
|
tape->pc = pc;
|
|
|
|
if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
|
|
(pc->flags & PC_FLAG_ABORT)) {
|
|
/*
|
|
* We will "abort" retrying a packet command in case legitimate
|
|
* error code was received (crossing a filemark, or end of the
|
|
* media, for example).
|
|
*/
|
|
if (!(pc->flags & PC_FLAG_ABORT)) {
|
|
if (!(pc->c[0] == TEST_UNIT_READY &&
|
|
tape->sense_key == 2 && tape->asc == 4 &&
|
|
(tape->ascq == 1 || tape->ascq == 8))) {
|
|
printk(KERN_ERR "ide-tape: %s: I/O error, "
|
|
"pc = %2x, key = %2x, "
|
|
"asc = %2x, ascq = %2x\n",
|
|
tape->name, pc->c[0],
|
|
tape->sense_key, tape->asc,
|
|
tape->ascq);
|
|
}
|
|
/* Giving up */
|
|
pc->error = IDETAPE_ERROR_GENERAL;
|
|
}
|
|
tape->failed_pc = NULL;
|
|
pc->callback(drive);
|
|
return ide_stopped;
|
|
}
|
|
debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
|
|
|
|
pc->retries++;
|
|
|
|
return ide_issue_pc(drive, pc, idetape_transfer_pc,
|
|
IDETAPE_WAIT_CMD, NULL);
|
|
}
|
|
|
|
/* A mode sense command is used to "sense" tape parameters. */
|
|
static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = MODE_SENSE;
|
|
if (page_code != IDETAPE_BLOCK_DESCRIPTOR)
|
|
/* DBD = 1 - Don't return block descriptors */
|
|
pc->c[1] = 8;
|
|
pc->c[2] = page_code;
|
|
/*
|
|
* Changed pc->c[3] to 0 (255 will at best return unused info).
|
|
*
|
|
* For SCSI this byte is defined as subpage instead of high byte
|
|
* of length and some IDE drives seem to interpret it this way
|
|
* and return an error when 255 is used.
|
|
*/
|
|
pc->c[3] = 0;
|
|
/* We will just discard data in that case */
|
|
pc->c[4] = 255;
|
|
if (page_code == IDETAPE_BLOCK_DESCRIPTOR)
|
|
pc->req_xfer = 12;
|
|
else if (page_code == IDETAPE_CAPABILITIES_PAGE)
|
|
pc->req_xfer = 24;
|
|
else
|
|
pc->req_xfer = 50;
|
|
}
|
|
|
|
static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc *pc = tape->pc;
|
|
u8 stat;
|
|
|
|
stat = hwif->tp_ops->read_status(hwif);
|
|
|
|
if (stat & SEEK_STAT) {
|
|
if (stat & ERR_STAT) {
|
|
/* Error detected */
|
|
if (pc->c[0] != TEST_UNIT_READY)
|
|
printk(KERN_ERR "ide-tape: %s: I/O error, ",
|
|
tape->name);
|
|
/* Retry operation */
|
|
idetape_retry_pc(drive);
|
|
return ide_stopped;
|
|
}
|
|
pc->error = 0;
|
|
} else {
|
|
pc->error = IDETAPE_ERROR_GENERAL;
|
|
tape->failed_pc = NULL;
|
|
}
|
|
pc->callback(drive);
|
|
return ide_stopped;
|
|
}
|
|
|
|
static void ide_tape_create_rw_cmd(idetape_tape_t *tape,
|
|
struct ide_atapi_pc *pc, unsigned int length,
|
|
struct idetape_bh *bh, u8 opcode)
|
|
{
|
|
idetape_init_pc(pc);
|
|
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
|
|
pc->c[1] = 1;
|
|
pc->bh = bh;
|
|
pc->buf = NULL;
|
|
pc->buf_size = length * tape->blk_size;
|
|
pc->req_xfer = pc->buf_size;
|
|
if (pc->req_xfer == tape->buffer_size)
|
|
pc->flags |= PC_FLAG_DMA_OK;
|
|
|
|
if (opcode == READ_6) {
|
|
pc->c[0] = READ_6;
|
|
atomic_set(&bh->b_count, 0);
|
|
} else if (opcode == WRITE_6) {
|
|
pc->c[0] = WRITE_6;
|
|
pc->flags |= PC_FLAG_WRITING;
|
|
pc->b_data = bh->b_data;
|
|
pc->b_count = atomic_read(&bh->b_count);
|
|
}
|
|
}
|
|
|
|
static ide_startstop_t idetape_do_request(ide_drive_t *drive,
|
|
struct request *rq, sector_t block)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc *pc = NULL;
|
|
struct request *postponed_rq = tape->postponed_rq;
|
|
u8 stat;
|
|
|
|
debug_log(DBG_SENSE, "sector: %ld, nr_sectors: %ld,"
|
|
" current_nr_sectors: %d\n",
|
|
rq->sector, rq->nr_sectors, rq->current_nr_sectors);
|
|
|
|
if (!blk_special_request(rq)) {
|
|
/* We do not support buffer cache originated requests. */
|
|
printk(KERN_NOTICE "ide-tape: %s: Unsupported request in "
|
|
"request queue (%d)\n", drive->name, rq->cmd_type);
|
|
ide_end_request(drive, 0, 0);
|
|
return ide_stopped;
|
|
}
|
|
|
|
/* Retry a failed packet command */
|
|
if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) {
|
|
pc = tape->failed_pc;
|
|
goto out;
|
|
}
|
|
|
|
if (postponed_rq != NULL)
|
|
if (rq != postponed_rq) {
|
|
printk(KERN_ERR "ide-tape: ide-tape.c bug - "
|
|
"Two DSC requests were queued\n");
|
|
idetape_end_request(drive, 0, 0);
|
|
return ide_stopped;
|
|
}
|
|
|
|
tape->postponed_rq = NULL;
|
|
|
|
/*
|
|
* If the tape is still busy, postpone our request and service
|
|
* the other device meanwhile.
|
|
*/
|
|
stat = hwif->tp_ops->read_status(hwif);
|
|
|
|
if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
|
|
set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
|
|
|
|
if (drive->post_reset == 1) {
|
|
set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
|
|
drive->post_reset = 0;
|
|
}
|
|
|
|
if (!test_and_clear_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags) &&
|
|
(stat & SEEK_STAT) == 0) {
|
|
if (postponed_rq == NULL) {
|
|
tape->dsc_polling_start = jiffies;
|
|
tape->dsc_poll_freq = tape->best_dsc_rw_freq;
|
|
tape->dsc_timeout = jiffies + IDETAPE_DSC_RW_TIMEOUT;
|
|
} else if (time_after(jiffies, tape->dsc_timeout)) {
|
|
printk(KERN_ERR "ide-tape: %s: DSC timeout\n",
|
|
tape->name);
|
|
if (rq->cmd[0] & REQ_IDETAPE_PC2) {
|
|
idetape_media_access_finished(drive);
|
|
return ide_stopped;
|
|
} else {
|
|
return ide_do_reset(drive);
|
|
}
|
|
} else if (time_after(jiffies,
|
|
tape->dsc_polling_start +
|
|
IDETAPE_DSC_MA_THRESHOLD))
|
|
tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW;
|
|
idetape_postpone_request(drive);
|
|
return ide_stopped;
|
|
}
|
|
if (rq->cmd[0] & REQ_IDETAPE_READ) {
|
|
pc = idetape_next_pc_storage(drive);
|
|
ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors,
|
|
(struct idetape_bh *)rq->special,
|
|
READ_6);
|
|
goto out;
|
|
}
|
|
if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
|
|
pc = idetape_next_pc_storage(drive);
|
|
ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors,
|
|
(struct idetape_bh *)rq->special,
|
|
WRITE_6);
|
|
goto out;
|
|
}
|
|
if (rq->cmd[0] & REQ_IDETAPE_PC1) {
|
|
pc = (struct ide_atapi_pc *) rq->buffer;
|
|
rq->cmd[0] &= ~(REQ_IDETAPE_PC1);
|
|
rq->cmd[0] |= REQ_IDETAPE_PC2;
|
|
goto out;
|
|
}
|
|
if (rq->cmd[0] & REQ_IDETAPE_PC2) {
|
|
idetape_media_access_finished(drive);
|
|
return ide_stopped;
|
|
}
|
|
BUG();
|
|
out:
|
|
if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags))
|
|
pc->flags |= PC_FLAG_DRQ_INTERRUPT;
|
|
|
|
return idetape_issue_pc(drive, pc);
|
|
}
|
|
|
|
/*
|
|
* The function below uses __get_free_pages to allocate a data buffer of size
|
|
* tape->buffer_size (or a bit more). We attempt to combine sequential pages as
|
|
* much as possible.
|
|
*
|
|
* It returns a pointer to the newly allocated buffer, or NULL in case of
|
|
* failure.
|
|
*/
|
|
static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape,
|
|
int full, int clear)
|
|
{
|
|
struct idetape_bh *prev_bh, *bh, *merge_bh;
|
|
int pages = tape->pages_per_buffer;
|
|
unsigned int order, b_allocd;
|
|
char *b_data = NULL;
|
|
|
|
merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
|
|
bh = merge_bh;
|
|
if (bh == NULL)
|
|
goto abort;
|
|
|
|
order = fls(pages) - 1;
|
|
bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order);
|
|
if (!bh->b_data)
|
|
goto abort;
|
|
b_allocd = (1 << order) * PAGE_SIZE;
|
|
pages &= (order-1);
|
|
|
|
if (clear)
|
|
memset(bh->b_data, 0, b_allocd);
|
|
bh->b_reqnext = NULL;
|
|
bh->b_size = b_allocd;
|
|
atomic_set(&bh->b_count, full ? bh->b_size : 0);
|
|
|
|
while (pages) {
|
|
order = fls(pages) - 1;
|
|
b_data = (char *) __get_free_pages(GFP_KERNEL, order);
|
|
if (!b_data)
|
|
goto abort;
|
|
b_allocd = (1 << order) * PAGE_SIZE;
|
|
|
|
if (clear)
|
|
memset(b_data, 0, b_allocd);
|
|
|
|
/* newly allocated page frames below buffer header or ...*/
|
|
if (bh->b_data == b_data + b_allocd) {
|
|
bh->b_size += b_allocd;
|
|
bh->b_data -= b_allocd;
|
|
if (full)
|
|
atomic_add(b_allocd, &bh->b_count);
|
|
continue;
|
|
}
|
|
/* they are above the header */
|
|
if (b_data == bh->b_data + bh->b_size) {
|
|
bh->b_size += b_allocd;
|
|
if (full)
|
|
atomic_add(b_allocd, &bh->b_count);
|
|
continue;
|
|
}
|
|
prev_bh = bh;
|
|
bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
|
|
if (!bh) {
|
|
free_pages((unsigned long) b_data, order);
|
|
goto abort;
|
|
}
|
|
bh->b_reqnext = NULL;
|
|
bh->b_data = b_data;
|
|
bh->b_size = b_allocd;
|
|
atomic_set(&bh->b_count, full ? bh->b_size : 0);
|
|
prev_bh->b_reqnext = bh;
|
|
|
|
pages &= (order-1);
|
|
}
|
|
|
|
bh->b_size -= tape->excess_bh_size;
|
|
if (full)
|
|
atomic_sub(tape->excess_bh_size, &bh->b_count);
|
|
return merge_bh;
|
|
abort:
|
|
ide_tape_kfree_buffer(tape);
|
|
return NULL;
|
|
}
|
|
|
|
static int idetape_copy_stage_from_user(idetape_tape_t *tape,
|
|
const char __user *buf, int n)
|
|
{
|
|
struct idetape_bh *bh = tape->bh;
|
|
int count;
|
|
int ret = 0;
|
|
|
|
while (n) {
|
|
if (bh == NULL) {
|
|
printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
|
|
__func__);
|
|
return 1;
|
|
}
|
|
count = min((unsigned int)
|
|
(bh->b_size - atomic_read(&bh->b_count)),
|
|
(unsigned int)n);
|
|
if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf,
|
|
count))
|
|
ret = 1;
|
|
n -= count;
|
|
atomic_add(count, &bh->b_count);
|
|
buf += count;
|
|
if (atomic_read(&bh->b_count) == bh->b_size) {
|
|
bh = bh->b_reqnext;
|
|
if (bh)
|
|
atomic_set(&bh->b_count, 0);
|
|
}
|
|
}
|
|
tape->bh = bh;
|
|
return ret;
|
|
}
|
|
|
|
static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf,
|
|
int n)
|
|
{
|
|
struct idetape_bh *bh = tape->bh;
|
|
int count;
|
|
int ret = 0;
|
|
|
|
while (n) {
|
|
if (bh == NULL) {
|
|
printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
|
|
__func__);
|
|
return 1;
|
|
}
|
|
count = min(tape->b_count, n);
|
|
if (copy_to_user(buf, tape->b_data, count))
|
|
ret = 1;
|
|
n -= count;
|
|
tape->b_data += count;
|
|
tape->b_count -= count;
|
|
buf += count;
|
|
if (!tape->b_count) {
|
|
bh = bh->b_reqnext;
|
|
tape->bh = bh;
|
|
if (bh) {
|
|
tape->b_data = bh->b_data;
|
|
tape->b_count = atomic_read(&bh->b_count);
|
|
}
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void idetape_init_merge_buffer(idetape_tape_t *tape)
|
|
{
|
|
struct idetape_bh *bh = tape->merge_bh;
|
|
tape->bh = tape->merge_bh;
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
|
|
atomic_set(&bh->b_count, 0);
|
|
else {
|
|
tape->b_data = bh->b_data;
|
|
tape->b_count = atomic_read(&bh->b_count);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Write a filemark if write_filemark=1. Flush the device buffers without
|
|
* writing a filemark otherwise.
|
|
*/
|
|
static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc, int write_filemark)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = WRITE_FILEMARKS;
|
|
pc->c[4] = write_filemark;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = TEST_UNIT_READY;
|
|
}
|
|
|
|
/*
|
|
* We add a special packet command request to the tail of the request queue, and
|
|
* wait for it to be serviced. This is not to be called from within the request
|
|
* handling part of the driver! We allocate here data on the stack and it is
|
|
* valid until the request is finished. This is not the case for the bottom part
|
|
* of the driver, where we are always leaving the functions to wait for an
|
|
* interrupt or a timer event.
|
|
*
|
|
* From the bottom part of the driver, we should allocate safe memory using
|
|
* idetape_next_pc_storage() and ide_tape_next_rq_storage(), and add the request
|
|
* to the request list without waiting for it to be serviced! In that case, we
|
|
* usually use idetape_queue_pc_head().
|
|
*/
|
|
static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
|
|
{
|
|
struct ide_tape_obj *tape = drive->driver_data;
|
|
struct request *rq;
|
|
int error;
|
|
|
|
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
|
|
rq->cmd_type = REQ_TYPE_SPECIAL;
|
|
rq->cmd[0] = REQ_IDETAPE_PC1;
|
|
rq->buffer = (char *)pc;
|
|
error = blk_execute_rq(drive->queue, tape->disk, rq, 0);
|
|
blk_put_request(rq);
|
|
return error;
|
|
}
|
|
|
|
static void idetape_create_load_unload_cmd(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc, int cmd)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = START_STOP;
|
|
pc->c[4] = cmd;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
int load_attempted = 0;
|
|
|
|
/* Wait for the tape to become ready */
|
|
set_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
|
|
timeout += jiffies;
|
|
while (time_before(jiffies, timeout)) {
|
|
idetape_create_test_unit_ready_cmd(&pc);
|
|
if (!idetape_queue_pc_tail(drive, &pc))
|
|
return 0;
|
|
if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2)
|
|
|| (tape->asc == 0x3A)) {
|
|
/* no media */
|
|
if (load_attempted)
|
|
return -ENOMEDIUM;
|
|
idetape_create_load_unload_cmd(drive, &pc,
|
|
IDETAPE_LU_LOAD_MASK);
|
|
idetape_queue_pc_tail(drive, &pc);
|
|
load_attempted = 1;
|
|
/* not about to be ready */
|
|
} else if (!(tape->sense_key == 2 && tape->asc == 4 &&
|
|
(tape->ascq == 1 || tape->ascq == 8)))
|
|
return -EIO;
|
|
msleep(100);
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
static int idetape_flush_tape_buffers(ide_drive_t *drive)
|
|
{
|
|
struct ide_atapi_pc pc;
|
|
int rc;
|
|
|
|
idetape_create_write_filemark_cmd(drive, &pc, 0);
|
|
rc = idetape_queue_pc_tail(drive, &pc);
|
|
if (rc)
|
|
return rc;
|
|
idetape_wait_ready(drive, 60 * 5 * HZ);
|
|
return 0;
|
|
}
|
|
|
|
static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = READ_POSITION;
|
|
pc->req_xfer = 20;
|
|
}
|
|
|
|
static int idetape_read_position(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
int position;
|
|
|
|
debug_log(DBG_PROCS, "Enter %s\n", __func__);
|
|
|
|
idetape_create_read_position_cmd(&pc);
|
|
if (idetape_queue_pc_tail(drive, &pc))
|
|
return -1;
|
|
position = tape->first_frame;
|
|
return position;
|
|
}
|
|
|
|
static void idetape_create_locate_cmd(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc,
|
|
unsigned int block, u8 partition, int skip)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = POSITION_TO_ELEMENT;
|
|
pc->c[1] = 2;
|
|
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
|
|
pc->c[8] = partition;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
static int idetape_create_prevent_cmd(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc, int prevent)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
/* device supports locking according to capabilities page */
|
|
if (!(tape->caps[6] & 0x01))
|
|
return 0;
|
|
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = ALLOW_MEDIUM_REMOVAL;
|
|
pc->c[4] = prevent;
|
|
return 1;
|
|
}
|
|
|
|
static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
if (tape->chrdev_dir != IDETAPE_DIR_READ)
|
|
return;
|
|
|
|
clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags);
|
|
tape->merge_bh_size = 0;
|
|
if (tape->merge_bh != NULL) {
|
|
ide_tape_kfree_buffer(tape);
|
|
tape->merge_bh = NULL;
|
|
}
|
|
|
|
tape->chrdev_dir = IDETAPE_DIR_NONE;
|
|
}
|
|
|
|
/*
|
|
* Position the tape to the requested block using the LOCATE packet command.
|
|
* A READ POSITION command is then issued to check where we are positioned. Like
|
|
* all higher level operations, we queue the commands at the tail of the request
|
|
* queue and wait for their completion.
|
|
*/
|
|
static int idetape_position_tape(ide_drive_t *drive, unsigned int block,
|
|
u8 partition, int skip)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
int retval;
|
|
struct ide_atapi_pc pc;
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_READ)
|
|
__ide_tape_discard_merge_buffer(drive);
|
|
idetape_wait_ready(drive, 60 * 5 * HZ);
|
|
idetape_create_locate_cmd(drive, &pc, block, partition, skip);
|
|
retval = idetape_queue_pc_tail(drive, &pc);
|
|
if (retval)
|
|
return (retval);
|
|
|
|
idetape_create_read_position_cmd(&pc);
|
|
return (idetape_queue_pc_tail(drive, &pc));
|
|
}
|
|
|
|
static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
|
|
int restore_position)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
int seek, position;
|
|
|
|
__ide_tape_discard_merge_buffer(drive);
|
|
if (restore_position) {
|
|
position = idetape_read_position(drive);
|
|
seek = position > 0 ? position : 0;
|
|
if (idetape_position_tape(drive, seek, 0, 0)) {
|
|
printk(KERN_INFO "ide-tape: %s: position_tape failed in"
|
|
" %s\n", tape->name, __func__);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Generate a read/write request for the block device interface and wait for it
|
|
* to be serviced.
|
|
*/
|
|
static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
|
|
struct idetape_bh *bh)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct request *rq;
|
|
int ret, errors;
|
|
|
|
debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
|
|
|
|
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
|
|
rq->cmd_type = REQ_TYPE_SPECIAL;
|
|
rq->cmd[0] = cmd;
|
|
rq->rq_disk = tape->disk;
|
|
rq->special = (void *)bh;
|
|
rq->sector = tape->first_frame;
|
|
rq->nr_sectors = blocks;
|
|
rq->current_nr_sectors = blocks;
|
|
blk_execute_rq(drive->queue, tape->disk, rq, 0);
|
|
|
|
errors = rq->errors;
|
|
ret = tape->blk_size * (blocks - rq->current_nr_sectors);
|
|
blk_put_request(rq);
|
|
|
|
if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0)
|
|
return 0;
|
|
|
|
if (tape->merge_bh)
|
|
idetape_init_merge_buffer(tape);
|
|
if (errors == IDETAPE_ERROR_GENERAL)
|
|
return -EIO;
|
|
return ret;
|
|
}
|
|
|
|
static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = INQUIRY;
|
|
pc->c[4] = 254;
|
|
pc->req_xfer = 254;
|
|
}
|
|
|
|
static void idetape_create_rewind_cmd(ide_drive_t *drive,
|
|
struct ide_atapi_pc *pc)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = REZERO_UNIT;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = ERASE;
|
|
pc->c[1] = 1;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
|
|
{
|
|
idetape_init_pc(pc);
|
|
pc->c[0] = SPACE;
|
|
put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
|
|
pc->c[1] = cmd;
|
|
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
|
|
}
|
|
|
|
/* Queue up a character device originated write request. */
|
|
static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
|
|
|
|
return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
|
|
blocks, tape->merge_bh);
|
|
}
|
|
|
|
static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
int blocks, min;
|
|
struct idetape_bh *bh;
|
|
|
|
if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
|
|
printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer"
|
|
" but we are not writing.\n");
|
|
return;
|
|
}
|
|
if (tape->merge_bh_size > tape->buffer_size) {
|
|
printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n");
|
|
tape->merge_bh_size = tape->buffer_size;
|
|
}
|
|
if (tape->merge_bh_size) {
|
|
blocks = tape->merge_bh_size / tape->blk_size;
|
|
if (tape->merge_bh_size % tape->blk_size) {
|
|
unsigned int i;
|
|
|
|
blocks++;
|
|
i = tape->blk_size - tape->merge_bh_size %
|
|
tape->blk_size;
|
|
bh = tape->bh->b_reqnext;
|
|
while (bh) {
|
|
atomic_set(&bh->b_count, 0);
|
|
bh = bh->b_reqnext;
|
|
}
|
|
bh = tape->bh;
|
|
while (i) {
|
|
if (bh == NULL) {
|
|
printk(KERN_INFO "ide-tape: bug,"
|
|
" bh NULL\n");
|
|
break;
|
|
}
|
|
min = min(i, (unsigned int)(bh->b_size -
|
|
atomic_read(&bh->b_count)));
|
|
memset(bh->b_data + atomic_read(&bh->b_count),
|
|
0, min);
|
|
atomic_add(min, &bh->b_count);
|
|
i -= min;
|
|
bh = bh->b_reqnext;
|
|
}
|
|
}
|
|
(void) idetape_add_chrdev_write_request(drive, blocks);
|
|
tape->merge_bh_size = 0;
|
|
}
|
|
if (tape->merge_bh != NULL) {
|
|
ide_tape_kfree_buffer(tape);
|
|
tape->merge_bh = NULL;
|
|
}
|
|
tape->chrdev_dir = IDETAPE_DIR_NONE;
|
|
}
|
|
|
|
static int idetape_init_read(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
int bytes_read;
|
|
|
|
/* Initialize read operation */
|
|
if (tape->chrdev_dir != IDETAPE_DIR_READ) {
|
|
if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
|
|
ide_tape_flush_merge_buffer(drive);
|
|
idetape_flush_tape_buffers(drive);
|
|
}
|
|
if (tape->merge_bh || tape->merge_bh_size) {
|
|
printk(KERN_ERR "ide-tape: merge_bh_size should be"
|
|
" 0 now\n");
|
|
tape->merge_bh_size = 0;
|
|
}
|
|
tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0);
|
|
if (!tape->merge_bh)
|
|
return -ENOMEM;
|
|
tape->chrdev_dir = IDETAPE_DIR_READ;
|
|
|
|
/*
|
|
* Issue a read 0 command to ensure that DSC handshake is
|
|
* switched from completion mode to buffer available mode.
|
|
* No point in issuing this if DSC overlap isn't supported, some
|
|
* drives (Seagate STT3401A) will return an error.
|
|
*/
|
|
if (drive->dsc_overlap) {
|
|
bytes_read = idetape_queue_rw_tail(drive,
|
|
REQ_IDETAPE_READ, 0,
|
|
tape->merge_bh);
|
|
if (bytes_read < 0) {
|
|
ide_tape_kfree_buffer(tape);
|
|
tape->merge_bh = NULL;
|
|
tape->chrdev_dir = IDETAPE_DIR_NONE;
|
|
return bytes_read;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* called from idetape_chrdev_read() to service a chrdev read request. */
|
|
static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
|
|
|
|
/* If we are at a filemark, return a read length of 0 */
|
|
if (test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
|
|
return 0;
|
|
|
|
idetape_init_read(drive);
|
|
|
|
return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
|
|
tape->merge_bh);
|
|
}
|
|
|
|
static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct idetape_bh *bh;
|
|
int blocks;
|
|
|
|
while (bcount) {
|
|
unsigned int count;
|
|
|
|
bh = tape->merge_bh;
|
|
count = min(tape->buffer_size, bcount);
|
|
bcount -= count;
|
|
blocks = count / tape->blk_size;
|
|
while (count) {
|
|
atomic_set(&bh->b_count,
|
|
min(count, (unsigned int)bh->b_size));
|
|
memset(bh->b_data, 0, atomic_read(&bh->b_count));
|
|
count -= atomic_read(&bh->b_count);
|
|
bh = bh->b_reqnext;
|
|
}
|
|
idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks,
|
|
tape->merge_bh);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Rewinds the tape to the Beginning Of the current Partition (BOP). We
|
|
* currently support only one partition.
|
|
*/
|
|
static int idetape_rewind_tape(ide_drive_t *drive)
|
|
{
|
|
int retval;
|
|
struct ide_atapi_pc pc;
|
|
idetape_tape_t *tape;
|
|
tape = drive->driver_data;
|
|
|
|
debug_log(DBG_SENSE, "Enter %s\n", __func__);
|
|
|
|
idetape_create_rewind_cmd(drive, &pc);
|
|
retval = idetape_queue_pc_tail(drive, &pc);
|
|
if (retval)
|
|
return retval;
|
|
|
|
idetape_create_read_position_cmd(&pc);
|
|
retval = idetape_queue_pc_tail(drive, &pc);
|
|
if (retval)
|
|
return retval;
|
|
return 0;
|
|
}
|
|
|
|
/* mtio.h compatible commands should be issued to the chrdev interface. */
|
|
static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
void __user *argp = (void __user *)arg;
|
|
|
|
struct idetape_config {
|
|
int dsc_rw_frequency;
|
|
int dsc_media_access_frequency;
|
|
int nr_stages;
|
|
} config;
|
|
|
|
debug_log(DBG_PROCS, "Enter %s\n", __func__);
|
|
|
|
switch (cmd) {
|
|
case 0x0340:
|
|
if (copy_from_user(&config, argp, sizeof(config)))
|
|
return -EFAULT;
|
|
tape->best_dsc_rw_freq = config.dsc_rw_frequency;
|
|
break;
|
|
case 0x0350:
|
|
config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
|
|
config.nr_stages = 1;
|
|
if (copy_to_user(argp, &config, sizeof(config)))
|
|
return -EFAULT;
|
|
break;
|
|
default:
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
|
|
int mt_count)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
int retval, count = 0;
|
|
int sprev = !!(tape->caps[4] & 0x20);
|
|
|
|
if (mt_count == 0)
|
|
return 0;
|
|
if (MTBSF == mt_op || MTBSFM == mt_op) {
|
|
if (!sprev)
|
|
return -EIO;
|
|
mt_count = -mt_count;
|
|
}
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_READ) {
|
|
tape->merge_bh_size = 0;
|
|
if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
|
|
++count;
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
}
|
|
|
|
switch (mt_op) {
|
|
case MTFSF:
|
|
case MTBSF:
|
|
idetape_create_space_cmd(&pc, mt_count - count,
|
|
IDETAPE_SPACE_OVER_FILEMARK);
|
|
return idetape_queue_pc_tail(drive, &pc);
|
|
case MTFSFM:
|
|
case MTBSFM:
|
|
if (!sprev)
|
|
return -EIO;
|
|
retval = idetape_space_over_filemarks(drive, MTFSF,
|
|
mt_count - count);
|
|
if (retval)
|
|
return retval;
|
|
count = (MTBSFM == mt_op ? 1 : -1);
|
|
return idetape_space_over_filemarks(drive, MTFSF, count);
|
|
default:
|
|
printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
|
|
mt_op);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Our character device read / write functions.
|
|
*
|
|
* The tape is optimized to maximize throughput when it is transferring an
|
|
* integral number of the "continuous transfer limit", which is a parameter of
|
|
* the specific tape (26kB on my particular tape, 32kB for Onstream).
|
|
*
|
|
* As of version 1.3 of the driver, the character device provides an abstract
|
|
* continuous view of the media - any mix of block sizes (even 1 byte) on the
|
|
* same backup/restore procedure is supported. The driver will internally
|
|
* convert the requests to the recommended transfer unit, so that an unmatch
|
|
* between the user's block size to the recommended size will only result in a
|
|
* (slightly) increased driver overhead, but will no longer hit performance.
|
|
* This is not applicable to Onstream.
|
|
*/
|
|
static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ide_tape_obj *tape = ide_tape_f(file);
|
|
ide_drive_t *drive = tape->drive;
|
|
ssize_t bytes_read, temp, actually_read = 0, rc;
|
|
ssize_t ret = 0;
|
|
u16 ctl = *(u16 *)&tape->caps[12];
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
|
|
|
|
if (tape->chrdev_dir != IDETAPE_DIR_READ) {
|
|
if (test_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags))
|
|
if (count > tape->blk_size &&
|
|
(count % tape->blk_size) == 0)
|
|
tape->user_bs_factor = count / tape->blk_size;
|
|
}
|
|
rc = idetape_init_read(drive);
|
|
if (rc < 0)
|
|
return rc;
|
|
if (count == 0)
|
|
return (0);
|
|
if (tape->merge_bh_size) {
|
|
actually_read = min((unsigned int)(tape->merge_bh_size),
|
|
(unsigned int)count);
|
|
if (idetape_copy_stage_to_user(tape, buf, actually_read))
|
|
ret = -EFAULT;
|
|
buf += actually_read;
|
|
tape->merge_bh_size -= actually_read;
|
|
count -= actually_read;
|
|
}
|
|
while (count >= tape->buffer_size) {
|
|
bytes_read = idetape_add_chrdev_read_request(drive, ctl);
|
|
if (bytes_read <= 0)
|
|
goto finish;
|
|
if (idetape_copy_stage_to_user(tape, buf, bytes_read))
|
|
ret = -EFAULT;
|
|
buf += bytes_read;
|
|
count -= bytes_read;
|
|
actually_read += bytes_read;
|
|
}
|
|
if (count) {
|
|
bytes_read = idetape_add_chrdev_read_request(drive, ctl);
|
|
if (bytes_read <= 0)
|
|
goto finish;
|
|
temp = min((unsigned long)count, (unsigned long)bytes_read);
|
|
if (idetape_copy_stage_to_user(tape, buf, temp))
|
|
ret = -EFAULT;
|
|
actually_read += temp;
|
|
tape->merge_bh_size = bytes_read-temp;
|
|
}
|
|
finish:
|
|
if (!actually_read && test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) {
|
|
debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
|
|
|
|
idetape_space_over_filemarks(drive, MTFSF, 1);
|
|
return 0;
|
|
}
|
|
|
|
return ret ? ret : actually_read;
|
|
}
|
|
|
|
static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ide_tape_obj *tape = ide_tape_f(file);
|
|
ide_drive_t *drive = tape->drive;
|
|
ssize_t actually_written = 0;
|
|
ssize_t ret = 0;
|
|
u16 ctl = *(u16 *)&tape->caps[12];
|
|
|
|
/* The drive is write protected. */
|
|
if (tape->write_prot)
|
|
return -EACCES;
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
|
|
|
|
/* Initialize write operation */
|
|
if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
|
|
if (tape->chrdev_dir == IDETAPE_DIR_READ)
|
|
ide_tape_discard_merge_buffer(drive, 1);
|
|
if (tape->merge_bh || tape->merge_bh_size) {
|
|
printk(KERN_ERR "ide-tape: merge_bh_size "
|
|
"should be 0 now\n");
|
|
tape->merge_bh_size = 0;
|
|
}
|
|
tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0);
|
|
if (!tape->merge_bh)
|
|
return -ENOMEM;
|
|
tape->chrdev_dir = IDETAPE_DIR_WRITE;
|
|
idetape_init_merge_buffer(tape);
|
|
|
|
/*
|
|
* Issue a write 0 command to ensure that DSC handshake is
|
|
* switched from completion mode to buffer available mode. No
|
|
* point in issuing this if DSC overlap isn't supported, some
|
|
* drives (Seagate STT3401A) will return an error.
|
|
*/
|
|
if (drive->dsc_overlap) {
|
|
ssize_t retval = idetape_queue_rw_tail(drive,
|
|
REQ_IDETAPE_WRITE, 0,
|
|
tape->merge_bh);
|
|
if (retval < 0) {
|
|
ide_tape_kfree_buffer(tape);
|
|
tape->merge_bh = NULL;
|
|
tape->chrdev_dir = IDETAPE_DIR_NONE;
|
|
return retval;
|
|
}
|
|
}
|
|
}
|
|
if (count == 0)
|
|
return (0);
|
|
if (tape->merge_bh_size) {
|
|
if (tape->merge_bh_size >= tape->buffer_size) {
|
|
printk(KERN_ERR "ide-tape: bug: merge buf too big\n");
|
|
tape->merge_bh_size = 0;
|
|
}
|
|
actually_written = min((unsigned int)
|
|
(tape->buffer_size - tape->merge_bh_size),
|
|
(unsigned int)count);
|
|
if (idetape_copy_stage_from_user(tape, buf, actually_written))
|
|
ret = -EFAULT;
|
|
buf += actually_written;
|
|
tape->merge_bh_size += actually_written;
|
|
count -= actually_written;
|
|
|
|
if (tape->merge_bh_size == tape->buffer_size) {
|
|
ssize_t retval;
|
|
tape->merge_bh_size = 0;
|
|
retval = idetape_add_chrdev_write_request(drive, ctl);
|
|
if (retval <= 0)
|
|
return (retval);
|
|
}
|
|
}
|
|
while (count >= tape->buffer_size) {
|
|
ssize_t retval;
|
|
if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size))
|
|
ret = -EFAULT;
|
|
buf += tape->buffer_size;
|
|
count -= tape->buffer_size;
|
|
retval = idetape_add_chrdev_write_request(drive, ctl);
|
|
actually_written += tape->buffer_size;
|
|
if (retval <= 0)
|
|
return (retval);
|
|
}
|
|
if (count) {
|
|
actually_written += count;
|
|
if (idetape_copy_stage_from_user(tape, buf, count))
|
|
ret = -EFAULT;
|
|
tape->merge_bh_size += count;
|
|
}
|
|
return ret ? ret : actually_written;
|
|
}
|
|
|
|
static int idetape_write_filemark(ide_drive_t *drive)
|
|
{
|
|
struct ide_atapi_pc pc;
|
|
|
|
/* Write a filemark */
|
|
idetape_create_write_filemark_cmd(drive, &pc, 1);
|
|
if (idetape_queue_pc_tail(drive, &pc)) {
|
|
printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called from idetape_chrdev_ioctl when the general mtio MTIOCTOP ioctl is
|
|
* requested.
|
|
*
|
|
* Note: MTBSF and MTBSFM are not supported when the tape doesn't support
|
|
* spacing over filemarks in the reverse direction. In this case, MTFSFM is also
|
|
* usually not supported.
|
|
*
|
|
* The following commands are currently not supported:
|
|
*
|
|
* MTFSS, MTBSS, MTWSM, MTSETDENSITY, MTSETDRVBUFFER, MT_ST_BOOLEANS,
|
|
* MT_ST_WRITE_THRESHOLD.
|
|
*/
|
|
static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
int i, retval;
|
|
|
|
debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
|
|
mt_op, mt_count);
|
|
|
|
switch (mt_op) {
|
|
case MTFSF:
|
|
case MTFSFM:
|
|
case MTBSF:
|
|
case MTBSFM:
|
|
if (!mt_count)
|
|
return 0;
|
|
return idetape_space_over_filemarks(drive, mt_op, mt_count);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (mt_op) {
|
|
case MTWEOF:
|
|
if (tape->write_prot)
|
|
return -EACCES;
|
|
ide_tape_discard_merge_buffer(drive, 1);
|
|
for (i = 0; i < mt_count; i++) {
|
|
retval = idetape_write_filemark(drive);
|
|
if (retval)
|
|
return retval;
|
|
}
|
|
return 0;
|
|
case MTREW:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
if (idetape_rewind_tape(drive))
|
|
return -EIO;
|
|
return 0;
|
|
case MTLOAD:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
idetape_create_load_unload_cmd(drive, &pc,
|
|
IDETAPE_LU_LOAD_MASK);
|
|
return idetape_queue_pc_tail(drive, &pc);
|
|
case MTUNLOAD:
|
|
case MTOFFL:
|
|
/*
|
|
* If door is locked, attempt to unlock before
|
|
* attempting to eject.
|
|
*/
|
|
if (tape->door_locked) {
|
|
if (idetape_create_prevent_cmd(drive, &pc, 0))
|
|
if (!idetape_queue_pc_tail(drive, &pc))
|
|
tape->door_locked = DOOR_UNLOCKED;
|
|
}
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
idetape_create_load_unload_cmd(drive, &pc,
|
|
!IDETAPE_LU_LOAD_MASK);
|
|
retval = idetape_queue_pc_tail(drive, &pc);
|
|
if (!retval)
|
|
clear_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
|
|
return retval;
|
|
case MTNOP:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
return idetape_flush_tape_buffers(drive);
|
|
case MTRETEN:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
idetape_create_load_unload_cmd(drive, &pc,
|
|
IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
|
|
return idetape_queue_pc_tail(drive, &pc);
|
|
case MTEOM:
|
|
idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
|
|
return idetape_queue_pc_tail(drive, &pc);
|
|
case MTERASE:
|
|
(void)idetape_rewind_tape(drive);
|
|
idetape_create_erase_cmd(&pc);
|
|
return idetape_queue_pc_tail(drive, &pc);
|
|
case MTSETBLK:
|
|
if (mt_count) {
|
|
if (mt_count < tape->blk_size ||
|
|
mt_count % tape->blk_size)
|
|
return -EIO;
|
|
tape->user_bs_factor = mt_count / tape->blk_size;
|
|
clear_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
|
|
} else
|
|
set_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
|
|
return 0;
|
|
case MTSEEK:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
return idetape_position_tape(drive,
|
|
mt_count * tape->user_bs_factor, tape->partition, 0);
|
|
case MTSETPART:
|
|
ide_tape_discard_merge_buffer(drive, 0);
|
|
return idetape_position_tape(drive, 0, mt_count, 0);
|
|
case MTFSR:
|
|
case MTBSR:
|
|
case MTLOCK:
|
|
if (!idetape_create_prevent_cmd(drive, &pc, 1))
|
|
return 0;
|
|
retval = idetape_queue_pc_tail(drive, &pc);
|
|
if (retval)
|
|
return retval;
|
|
tape->door_locked = DOOR_EXPLICITLY_LOCKED;
|
|
return 0;
|
|
case MTUNLOCK:
|
|
if (!idetape_create_prevent_cmd(drive, &pc, 0))
|
|
return 0;
|
|
retval = idetape_queue_pc_tail(drive, &pc);
|
|
if (retval)
|
|
return retval;
|
|
tape->door_locked = DOOR_UNLOCKED;
|
|
return 0;
|
|
default:
|
|
printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",
|
|
mt_op);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Our character device ioctls. General mtio.h magnetic io commands are
|
|
* supported here, and not in the corresponding block interface. Our own
|
|
* ide-tape ioctls are supported on both interfaces.
|
|
*/
|
|
static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct ide_tape_obj *tape = ide_tape_f(file);
|
|
ide_drive_t *drive = tape->drive;
|
|
struct mtop mtop;
|
|
struct mtget mtget;
|
|
struct mtpos mtpos;
|
|
int block_offset = 0, position = tape->first_frame;
|
|
void __user *argp = (void __user *)arg;
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd);
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
|
|
ide_tape_flush_merge_buffer(drive);
|
|
idetape_flush_tape_buffers(drive);
|
|
}
|
|
if (cmd == MTIOCGET || cmd == MTIOCPOS) {
|
|
block_offset = tape->merge_bh_size /
|
|
(tape->blk_size * tape->user_bs_factor);
|
|
position = idetape_read_position(drive);
|
|
if (position < 0)
|
|
return -EIO;
|
|
}
|
|
switch (cmd) {
|
|
case MTIOCTOP:
|
|
if (copy_from_user(&mtop, argp, sizeof(struct mtop)))
|
|
return -EFAULT;
|
|
return idetape_mtioctop(drive, mtop.mt_op, mtop.mt_count);
|
|
case MTIOCGET:
|
|
memset(&mtget, 0, sizeof(struct mtget));
|
|
mtget.mt_type = MT_ISSCSI2;
|
|
mtget.mt_blkno = position / tape->user_bs_factor - block_offset;
|
|
mtget.mt_dsreg =
|
|
((tape->blk_size * tape->user_bs_factor)
|
|
<< MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK;
|
|
|
|
if (tape->drv_write_prot)
|
|
mtget.mt_gstat |= GMT_WR_PROT(0xffffffff);
|
|
|
|
if (copy_to_user(argp, &mtget, sizeof(struct mtget)))
|
|
return -EFAULT;
|
|
return 0;
|
|
case MTIOCPOS:
|
|
mtpos.mt_blkno = position / tape->user_bs_factor - block_offset;
|
|
if (copy_to_user(argp, &mtpos, sizeof(struct mtpos)))
|
|
return -EFAULT;
|
|
return 0;
|
|
default:
|
|
if (tape->chrdev_dir == IDETAPE_DIR_READ)
|
|
ide_tape_discard_merge_buffer(drive, 1);
|
|
return idetape_blkdev_ioctl(drive, cmd, arg);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Do a mode sense page 0 with block descriptor and if it succeeds set the tape
|
|
* block size with the reported value.
|
|
*/
|
|
static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
|
|
idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
|
|
if (idetape_queue_pc_tail(drive, &pc)) {
|
|
printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
|
|
if (tape->blk_size == 0) {
|
|
printk(KERN_WARNING "ide-tape: Cannot deal with zero "
|
|
"block size, assuming 32k\n");
|
|
tape->blk_size = 32768;
|
|
}
|
|
return;
|
|
}
|
|
tape->blk_size = (pc.buf[4 + 5] << 16) +
|
|
(pc.buf[4 + 6] << 8) +
|
|
pc.buf[4 + 7];
|
|
tape->drv_write_prot = (pc.buf[2] & 0x80) >> 7;
|
|
}
|
|
|
|
static int idetape_chrdev_open(struct inode *inode, struct file *filp)
|
|
{
|
|
unsigned int minor = iminor(inode), i = minor & ~0xc0;
|
|
ide_drive_t *drive;
|
|
idetape_tape_t *tape;
|
|
struct ide_atapi_pc pc;
|
|
int retval;
|
|
|
|
if (i >= MAX_HWIFS * MAX_DRIVES)
|
|
return -ENXIO;
|
|
|
|
lock_kernel();
|
|
tape = ide_tape_chrdev_get(i);
|
|
if (!tape) {
|
|
unlock_kernel();
|
|
return -ENXIO;
|
|
}
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
|
|
|
|
/*
|
|
* We really want to do nonseekable_open(inode, filp); here, but some
|
|
* versions of tar incorrectly call lseek on tapes and bail out if that
|
|
* fails. So we disallow pread() and pwrite(), but permit lseeks.
|
|
*/
|
|
filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
|
|
|
|
drive = tape->drive;
|
|
|
|
filp->private_data = tape;
|
|
|
|
if (test_and_set_bit(IDETAPE_FLAG_BUSY, &tape->flags)) {
|
|
retval = -EBUSY;
|
|
goto out_put_tape;
|
|
}
|
|
|
|
retval = idetape_wait_ready(drive, 60 * HZ);
|
|
if (retval) {
|
|
clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
|
|
printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
|
|
goto out_put_tape;
|
|
}
|
|
|
|
idetape_read_position(drive);
|
|
if (!test_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags))
|
|
(void)idetape_rewind_tape(drive);
|
|
|
|
/* Read block size and write protect status from drive. */
|
|
ide_tape_get_bsize_from_bdesc(drive);
|
|
|
|
/* Set write protect flag if device is opened as read-only. */
|
|
if ((filp->f_flags & O_ACCMODE) == O_RDONLY)
|
|
tape->write_prot = 1;
|
|
else
|
|
tape->write_prot = tape->drv_write_prot;
|
|
|
|
/* Make sure drive isn't write protected if user wants to write. */
|
|
if (tape->write_prot) {
|
|
if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
|
|
(filp->f_flags & O_ACCMODE) == O_RDWR) {
|
|
clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
|
|
retval = -EROFS;
|
|
goto out_put_tape;
|
|
}
|
|
}
|
|
|
|
/* Lock the tape drive door so user can't eject. */
|
|
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
|
|
if (idetape_create_prevent_cmd(drive, &pc, 1)) {
|
|
if (!idetape_queue_pc_tail(drive, &pc)) {
|
|
if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
|
|
tape->door_locked = DOOR_LOCKED;
|
|
}
|
|
}
|
|
}
|
|
unlock_kernel();
|
|
return 0;
|
|
|
|
out_put_tape:
|
|
ide_tape_put(tape);
|
|
unlock_kernel();
|
|
return retval;
|
|
}
|
|
|
|
static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
ide_tape_flush_merge_buffer(drive);
|
|
tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0);
|
|
if (tape->merge_bh != NULL) {
|
|
idetape_pad_zeros(drive, tape->blk_size *
|
|
(tape->user_bs_factor - 1));
|
|
ide_tape_kfree_buffer(tape);
|
|
tape->merge_bh = NULL;
|
|
}
|
|
idetape_write_filemark(drive);
|
|
idetape_flush_tape_buffers(drive);
|
|
idetape_flush_tape_buffers(drive);
|
|
}
|
|
|
|
static int idetape_chrdev_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct ide_tape_obj *tape = ide_tape_f(filp);
|
|
ide_drive_t *drive = tape->drive;
|
|
struct ide_atapi_pc pc;
|
|
unsigned int minor = iminor(inode);
|
|
|
|
lock_kernel();
|
|
tape = drive->driver_data;
|
|
|
|
debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
|
|
|
|
if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
|
|
idetape_write_release(drive, minor);
|
|
if (tape->chrdev_dir == IDETAPE_DIR_READ) {
|
|
if (minor < 128)
|
|
ide_tape_discard_merge_buffer(drive, 1);
|
|
}
|
|
|
|
if (minor < 128 && test_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags))
|
|
(void) idetape_rewind_tape(drive);
|
|
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
|
|
if (tape->door_locked == DOOR_LOCKED) {
|
|
if (idetape_create_prevent_cmd(drive, &pc, 0)) {
|
|
if (!idetape_queue_pc_tail(drive, &pc))
|
|
tape->door_locked = DOOR_UNLOCKED;
|
|
}
|
|
}
|
|
}
|
|
clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
|
|
ide_tape_put(tape);
|
|
unlock_kernel();
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* check the contents of the ATAPI IDENTIFY command results. We return:
|
|
*
|
|
* 1 - If the tape can be supported by us, based on the information we have so
|
|
* far.
|
|
*
|
|
* 0 - If this tape driver is not currently supported by us.
|
|
*/
|
|
static int idetape_identify_device(ide_drive_t *drive)
|
|
{
|
|
u8 gcw[2], protocol, device_type, removable, packet_size;
|
|
|
|
if (drive->id_read == 0)
|
|
return 1;
|
|
|
|
*((unsigned short *) &gcw) = drive->id->config;
|
|
|
|
protocol = (gcw[1] & 0xC0) >> 6;
|
|
device_type = gcw[1] & 0x1F;
|
|
removable = !!(gcw[0] & 0x80);
|
|
packet_size = gcw[0] & 0x3;
|
|
|
|
/* Check that we can support this device */
|
|
if (protocol != 2)
|
|
printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n",
|
|
protocol);
|
|
else if (device_type != 1)
|
|
printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set "
|
|
"to tape\n", device_type);
|
|
else if (!removable)
|
|
printk(KERN_ERR "ide-tape: The removable flag is not set\n");
|
|
else if (packet_size != 0) {
|
|
printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12"
|
|
" bytes\n", packet_size);
|
|
} else
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static void idetape_get_inquiry_results(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
char fw_rev[6], vendor_id[10], product_id[18];
|
|
|
|
idetape_create_inquiry_cmd(&pc);
|
|
if (idetape_queue_pc_tail(drive, &pc)) {
|
|
printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
|
|
tape->name);
|
|
return;
|
|
}
|
|
memcpy(vendor_id, &pc.buf[8], 8);
|
|
memcpy(product_id, &pc.buf[16], 16);
|
|
memcpy(fw_rev, &pc.buf[32], 4);
|
|
|
|
ide_fixstring(vendor_id, 10, 0);
|
|
ide_fixstring(product_id, 18, 0);
|
|
ide_fixstring(fw_rev, 6, 0);
|
|
|
|
printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
|
|
drive->name, tape->name, vendor_id, product_id, fw_rev);
|
|
}
|
|
|
|
/*
|
|
* Ask the tape about its various parameters. In particular, we will adjust our
|
|
* data transfer buffer size to the recommended value as returned by the tape.
|
|
*/
|
|
static void idetape_get_mode_sense_results(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
struct ide_atapi_pc pc;
|
|
u8 *caps;
|
|
u8 speed, max_speed;
|
|
|
|
idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
|
|
if (idetape_queue_pc_tail(drive, &pc)) {
|
|
printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
|
|
" some default values\n");
|
|
tape->blk_size = 512;
|
|
put_unaligned(52, (u16 *)&tape->caps[12]);
|
|
put_unaligned(540, (u16 *)&tape->caps[14]);
|
|
put_unaligned(6*52, (u16 *)&tape->caps[16]);
|
|
return;
|
|
}
|
|
caps = pc.buf + 4 + pc.buf[3];
|
|
|
|
/* convert to host order and save for later use */
|
|
speed = be16_to_cpu(*(u16 *)&caps[14]);
|
|
max_speed = be16_to_cpu(*(u16 *)&caps[8]);
|
|
|
|
put_unaligned(max_speed, (u16 *)&caps[8]);
|
|
put_unaligned(be16_to_cpu(*(u16 *)&caps[12]), (u16 *)&caps[12]);
|
|
put_unaligned(speed, (u16 *)&caps[14]);
|
|
put_unaligned(be16_to_cpu(*(u16 *)&caps[16]), (u16 *)&caps[16]);
|
|
|
|
if (!speed) {
|
|
printk(KERN_INFO "ide-tape: %s: invalid tape speed "
|
|
"(assuming 650KB/sec)\n", drive->name);
|
|
put_unaligned(650, (u16 *)&caps[14]);
|
|
}
|
|
if (!max_speed) {
|
|
printk(KERN_INFO "ide-tape: %s: invalid max_speed "
|
|
"(assuming 650KB/sec)\n", drive->name);
|
|
put_unaligned(650, (u16 *)&caps[8]);
|
|
}
|
|
|
|
memcpy(&tape->caps, caps, 20);
|
|
if (caps[7] & 0x02)
|
|
tape->blk_size = 512;
|
|
else if (caps[7] & 0x04)
|
|
tape->blk_size = 1024;
|
|
}
|
|
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
static void idetape_add_settings(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
|
|
1, 2, (u16 *)&tape->caps[16], NULL);
|
|
ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
|
|
1, 1, (u16 *)&tape->caps[14], NULL);
|
|
ide_add_setting(drive, "buffer_size", SETTING_READ, TYPE_INT, 0, 0xffff,
|
|
1, 1024, &tape->buffer_size, NULL);
|
|
ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN,
|
|
IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq,
|
|
NULL);
|
|
ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1,
|
|
1, &drive->dsc_overlap, NULL);
|
|
ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff,
|
|
1, 1, &tape->avg_speed, NULL);
|
|
ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1,
|
|
1, &tape->debug_mask, NULL);
|
|
}
|
|
#else
|
|
static inline void idetape_add_settings(ide_drive_t *drive) { ; }
|
|
#endif
|
|
|
|
/*
|
|
* The function below is called to:
|
|
*
|
|
* 1. Initialize our various state variables.
|
|
* 2. Ask the tape for its capabilities.
|
|
* 3. Allocate a buffer which will be used for data transfer. The buffer size
|
|
* is chosen based on the recommendation which we received in step 2.
|
|
*
|
|
* Note that at this point ide.c already assigned us an irq, so that we can
|
|
* queue requests here and wait for their completion.
|
|
*/
|
|
static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
|
|
{
|
|
unsigned long t;
|
|
int speed;
|
|
int buffer_size;
|
|
u8 gcw[2];
|
|
u16 *ctl = (u16 *)&tape->caps[12];
|
|
|
|
spin_lock_init(&tape->lock);
|
|
drive->dsc_overlap = 1;
|
|
if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
|
|
printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
|
|
tape->name);
|
|
drive->dsc_overlap = 0;
|
|
}
|
|
/* Seagate Travan drives do not support DSC overlap. */
|
|
if (strstr(drive->id->model, "Seagate STT3401"))
|
|
drive->dsc_overlap = 0;
|
|
tape->minor = minor;
|
|
tape->name[0] = 'h';
|
|
tape->name[1] = 't';
|
|
tape->name[2] = '0' + minor;
|
|
tape->chrdev_dir = IDETAPE_DIR_NONE;
|
|
tape->pc = tape->pc_stack;
|
|
*((unsigned short *) &gcw) = drive->id->config;
|
|
|
|
/* Command packet DRQ type */
|
|
if (((gcw[0] & 0x60) >> 5) == 1)
|
|
set_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags);
|
|
|
|
idetape_get_inquiry_results(drive);
|
|
idetape_get_mode_sense_results(drive);
|
|
ide_tape_get_bsize_from_bdesc(drive);
|
|
tape->user_bs_factor = 1;
|
|
tape->buffer_size = *ctl * tape->blk_size;
|
|
while (tape->buffer_size > 0xffff) {
|
|
printk(KERN_NOTICE "ide-tape: decreasing stage size\n");
|
|
*ctl /= 2;
|
|
tape->buffer_size = *ctl * tape->blk_size;
|
|
}
|
|
buffer_size = tape->buffer_size;
|
|
tape->pages_per_buffer = buffer_size / PAGE_SIZE;
|
|
if (buffer_size % PAGE_SIZE) {
|
|
tape->pages_per_buffer++;
|
|
tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE;
|
|
}
|
|
|
|
/* select the "best" DSC read/write polling freq */
|
|
speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);
|
|
|
|
t = (IDETAPE_FIFO_THRESHOLD * tape->buffer_size * HZ) / (speed * 1000);
|
|
|
|
/*
|
|
* Ensure that the number we got makes sense; limit it within
|
|
* IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX.
|
|
*/
|
|
tape->best_dsc_rw_freq = clamp_t(unsigned long, t, IDETAPE_DSC_RW_MIN,
|
|
IDETAPE_DSC_RW_MAX);
|
|
printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, "
|
|
"%lums tDSC%s\n",
|
|
drive->name, tape->name, *(u16 *)&tape->caps[14],
|
|
(*(u16 *)&tape->caps[16] * 512) / tape->buffer_size,
|
|
tape->buffer_size / 1024,
|
|
tape->best_dsc_rw_freq * 1000 / HZ,
|
|
drive->using_dma ? ", DMA":"");
|
|
|
|
idetape_add_settings(drive);
|
|
}
|
|
|
|
static void ide_tape_remove(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
|
|
ide_proc_unregister_driver(drive, tape->driver);
|
|
|
|
ide_unregister_region(tape->disk);
|
|
|
|
ide_tape_put(tape);
|
|
}
|
|
|
|
static void ide_tape_release(struct kref *kref)
|
|
{
|
|
struct ide_tape_obj *tape = to_ide_tape(kref);
|
|
ide_drive_t *drive = tape->drive;
|
|
struct gendisk *g = tape->disk;
|
|
|
|
BUG_ON(tape->merge_bh_size);
|
|
|
|
drive->dsc_overlap = 0;
|
|
drive->driver_data = NULL;
|
|
device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor));
|
|
device_destroy(idetape_sysfs_class,
|
|
MKDEV(IDETAPE_MAJOR, tape->minor + 128));
|
|
idetape_devs[tape->minor] = NULL;
|
|
g->private_data = NULL;
|
|
put_disk(g);
|
|
kfree(tape);
|
|
}
|
|
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
static int proc_idetape_read_name
|
|
(char *page, char **start, off_t off, int count, int *eof, void *data)
|
|
{
|
|
ide_drive_t *drive = (ide_drive_t *) data;
|
|
idetape_tape_t *tape = drive->driver_data;
|
|
char *out = page;
|
|
int len;
|
|
|
|
len = sprintf(out, "%s\n", tape->name);
|
|
PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
|
|
}
|
|
|
|
static ide_proc_entry_t idetape_proc[] = {
|
|
{ "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL },
|
|
{ "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL },
|
|
{ NULL, 0, NULL, NULL }
|
|
};
|
|
#endif
|
|
|
|
static int ide_tape_probe(ide_drive_t *);
|
|
|
|
static ide_driver_t idetape_driver = {
|
|
.gen_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "ide-tape",
|
|
.bus = &ide_bus_type,
|
|
},
|
|
.probe = ide_tape_probe,
|
|
.remove = ide_tape_remove,
|
|
.version = IDETAPE_VERSION,
|
|
.media = ide_tape,
|
|
.supports_dsc_overlap = 1,
|
|
.do_request = idetape_do_request,
|
|
.end_request = idetape_end_request,
|
|
.error = __ide_error,
|
|
#ifdef CONFIG_IDE_PROC_FS
|
|
.proc = idetape_proc,
|
|
#endif
|
|
};
|
|
|
|
/* Our character device supporting functions, passed to register_chrdev. */
|
|
static const struct file_operations idetape_fops = {
|
|
.owner = THIS_MODULE,
|
|
.read = idetape_chrdev_read,
|
|
.write = idetape_chrdev_write,
|
|
.ioctl = idetape_chrdev_ioctl,
|
|
.open = idetape_chrdev_open,
|
|
.release = idetape_chrdev_release,
|
|
};
|
|
|
|
static int idetape_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct gendisk *disk = inode->i_bdev->bd_disk;
|
|
struct ide_tape_obj *tape;
|
|
|
|
tape = ide_tape_get(disk);
|
|
if (!tape)
|
|
return -ENXIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int idetape_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct gendisk *disk = inode->i_bdev->bd_disk;
|
|
struct ide_tape_obj *tape = ide_tape_g(disk);
|
|
|
|
ide_tape_put(tape);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int idetape_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct block_device *bdev = inode->i_bdev;
|
|
struct ide_tape_obj *tape = ide_tape_g(bdev->bd_disk);
|
|
ide_drive_t *drive = tape->drive;
|
|
int err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
|
|
if (err == -EINVAL)
|
|
err = idetape_blkdev_ioctl(drive, cmd, arg);
|
|
return err;
|
|
}
|
|
|
|
static struct block_device_operations idetape_block_ops = {
|
|
.owner = THIS_MODULE,
|
|
.open = idetape_open,
|
|
.release = idetape_release,
|
|
.ioctl = idetape_ioctl,
|
|
};
|
|
|
|
static int ide_tape_probe(ide_drive_t *drive)
|
|
{
|
|
idetape_tape_t *tape;
|
|
struct gendisk *g;
|
|
int minor;
|
|
|
|
if (!strstr("ide-tape", drive->driver_req))
|
|
goto failed;
|
|
if (!drive->present)
|
|
goto failed;
|
|
if (drive->media != ide_tape)
|
|
goto failed;
|
|
if (!idetape_identify_device(drive)) {
|
|
printk(KERN_ERR "ide-tape: %s: not supported by this version of"
|
|
" the driver\n", drive->name);
|
|
goto failed;
|
|
}
|
|
tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL);
|
|
if (tape == NULL) {
|
|
printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n",
|
|
drive->name);
|
|
goto failed;
|
|
}
|
|
|
|
g = alloc_disk(1 << PARTN_BITS);
|
|
if (!g)
|
|
goto out_free_tape;
|
|
|
|
ide_init_disk(g, drive);
|
|
|
|
ide_proc_register_driver(drive, &idetape_driver);
|
|
|
|
kref_init(&tape->kref);
|
|
|
|
tape->drive = drive;
|
|
tape->driver = &idetape_driver;
|
|
tape->disk = g;
|
|
|
|
g->private_data = &tape->driver;
|
|
|
|
drive->driver_data = tape;
|
|
|
|
mutex_lock(&idetape_ref_mutex);
|
|
for (minor = 0; idetape_devs[minor]; minor++)
|
|
;
|
|
idetape_devs[minor] = tape;
|
|
mutex_unlock(&idetape_ref_mutex);
|
|
|
|
idetape_setup(drive, tape, minor);
|
|
|
|
device_create_drvdata(idetape_sysfs_class, &drive->gendev,
|
|
MKDEV(IDETAPE_MAJOR, minor), NULL,
|
|
"%s", tape->name);
|
|
device_create_drvdata(idetape_sysfs_class, &drive->gendev,
|
|
MKDEV(IDETAPE_MAJOR, minor + 128), NULL,
|
|
"n%s", tape->name);
|
|
|
|
g->fops = &idetape_block_ops;
|
|
ide_register_region(g);
|
|
|
|
return 0;
|
|
|
|
out_free_tape:
|
|
kfree(tape);
|
|
failed:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void __exit idetape_exit(void)
|
|
{
|
|
driver_unregister(&idetape_driver.gen_driver);
|
|
class_destroy(idetape_sysfs_class);
|
|
unregister_chrdev(IDETAPE_MAJOR, "ht");
|
|
}
|
|
|
|
static int __init idetape_init(void)
|
|
{
|
|
int error = 1;
|
|
idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape");
|
|
if (IS_ERR(idetape_sysfs_class)) {
|
|
idetape_sysfs_class = NULL;
|
|
printk(KERN_ERR "Unable to create sysfs class for ide tapes\n");
|
|
error = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) {
|
|
printk(KERN_ERR "ide-tape: Failed to register chrdev"
|
|
" interface\n");
|
|
error = -EBUSY;
|
|
goto out_free_class;
|
|
}
|
|
|
|
error = driver_register(&idetape_driver.gen_driver);
|
|
if (error)
|
|
goto out_free_driver;
|
|
|
|
return 0;
|
|
|
|
out_free_driver:
|
|
driver_unregister(&idetape_driver.gen_driver);
|
|
out_free_class:
|
|
class_destroy(idetape_sysfs_class);
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
MODULE_ALIAS("ide:*m-tape*");
|
|
module_init(idetape_init);
|
|
module_exit(idetape_exit);
|
|
MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR);
|
|
MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver");
|
|
MODULE_LICENSE("GPL");
|