mirror of https://gitee.com/openkylin/linux.git
384 lines
12 KiB
Plaintext
384 lines
12 KiB
Plaintext
Altera SoCFPGA ECC Manager
|
|
This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
|
|
The ECC Manager counts and corrects single bit errors and counts/handles
|
|
double bit errors which are uncorrectable.
|
|
|
|
Cyclone5 and Arria5 ECC Manager
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-ecc-manager"
|
|
- #address-cells: must be 1
|
|
- #size-cells: must be 1
|
|
- ranges : standard definition, should translate from local addresses
|
|
|
|
Subcomponents:
|
|
|
|
L2 Cache ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-l2-ecc"
|
|
- reg : Address and size for ECC error interrupt clear registers.
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt. Note the rising edge type.
|
|
|
|
On Chip RAM ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-ocram-ecc"
|
|
- reg : Address and size for ECC error interrupt clear registers.
|
|
- iram : phandle to On-Chip RAM definition.
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt. Note the rising edge type.
|
|
|
|
Example:
|
|
|
|
eccmgr: eccmgr@ffd08140 {
|
|
compatible = "altr,socfpga-ecc-manager";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
l2-ecc@ffd08140 {
|
|
compatible = "altr,socfpga-l2-ecc";
|
|
reg = <0xffd08140 0x4>;
|
|
interrupts = <0 36 1>, <0 37 1>;
|
|
};
|
|
|
|
ocram-ecc@ffd08144 {
|
|
compatible = "altr,socfpga-ocram-ecc";
|
|
reg = <0xffd08144 0x4>;
|
|
iram = <&ocram>;
|
|
interrupts = <0 178 1>, <0 179 1>;
|
|
};
|
|
};
|
|
|
|
Arria10 SoCFPGA ECC Manager
|
|
The Arria10 SoC ECC Manager handles the IRQs for each peripheral
|
|
in a shared register instead of individual IRQs like the Cyclone5
|
|
and Arria5. Therefore the device tree is different as well.
|
|
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-a10-ecc-manager"
|
|
- altr,sysgr-syscon : phandle to Arria10 System Manager Block
|
|
containing the ECC manager registers.
|
|
- #address-cells: must be 1
|
|
- #size-cells: must be 1
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt.
|
|
- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
|
|
- #interrupt-cells : must be set to 2.
|
|
- ranges : standard definition, should translate from local addresses
|
|
|
|
Subcomponents:
|
|
|
|
L2 Cache ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-a10-l2-ecc"
|
|
- reg : Address and size for ECC error interrupt clear registers.
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt, in this order.
|
|
|
|
On-Chip RAM ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-a10-ocram-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt, in this order.
|
|
|
|
Ethernet FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-eth-mac-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent Ethernet node.
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt, in this order.
|
|
|
|
NAND FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-nand-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent NAND node.
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt, in this order.
|
|
|
|
DMA FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-dma-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent DMA node.
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt, in this order.
|
|
|
|
USB FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-usb-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent USB node.
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt, in this order.
|
|
|
|
QSPI FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-qspi-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent QSPI node.
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt, in this order.
|
|
|
|
SDMMC FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-sdmmc-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent SD/MMC node.
|
|
- interrupts : Should be single bit error interrupt, then double bit error
|
|
interrupt, in this order for port A, and then single bit error interrupt,
|
|
then double bit error interrupt in this order for port B.
|
|
|
|
Example:
|
|
|
|
eccmgr: eccmgr@ffd06000 {
|
|
compatible = "altr,socfpga-a10-ecc-manager";
|
|
altr,sysmgr-syscon = <&sysmgr>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
ranges;
|
|
|
|
l2-ecc@ffd06010 {
|
|
compatible = "altr,socfpga-a10-l2-ecc";
|
|
reg = <0xffd06010 0x4>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<32 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
ocram-ecc@ff8c3000 {
|
|
compatible = "altr,socfpga-a10-ocram-ecc";
|
|
reg = <0xff8c3000 0x90>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
|
|
<33 IRQ_TYPE_LEVEL_HIGH> ;
|
|
};
|
|
|
|
emac0-rx-ecc@ff8c0800 {
|
|
compatible = "altr,socfpga-eth-mac-ecc";
|
|
reg = <0xff8c0800 0x400>;
|
|
altr,ecc-parent = <&gmac0>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
|
|
<36 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
emac0-tx-ecc@ff8c0c00 {
|
|
compatible = "altr,socfpga-eth-mac-ecc";
|
|
reg = <0xff8c0c00 0x400>;
|
|
altr,ecc-parent = <&gmac0>;
|
|
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
|
|
<37 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
nand-buf-ecc@ff8c2000 {
|
|
compatible = "altr,socfpga-nand-ecc";
|
|
reg = <0xff8c2000 0x400>;
|
|
altr,ecc-parent = <&nand>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<43 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
nand-rd-ecc@ff8c2400 {
|
|
compatible = "altr,socfpga-nand-ecc";
|
|
reg = <0xff8c2400 0x400>;
|
|
altr,ecc-parent = <&nand>;
|
|
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
|
|
<45 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
nand-wr-ecc@ff8c2800 {
|
|
compatible = "altr,socfpga-nand-ecc";
|
|
reg = <0xff8c2800 0x400>;
|
|
altr,ecc-parent = <&nand>;
|
|
interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<44 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
dma-ecc@ff8c8000 {
|
|
compatible = "altr,socfpga-dma-ecc";
|
|
reg = <0xff8c8000 0x400>;
|
|
altr,ecc-parent = <&pdma>;
|
|
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
|
|
<42 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
usb0-ecc@ff8c8800 {
|
|
compatible = "altr,socfpga-usb-ecc";
|
|
reg = <0xff8c8800 0x400>;
|
|
altr,ecc-parent = <&usb0>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
|
|
<34 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
qspi-ecc@ff8c8400 {
|
|
compatible = "altr,socfpga-qspi-ecc";
|
|
reg = <0xff8c8400 0x400>;
|
|
altr,ecc-parent = <&qspi>;
|
|
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
|
|
<46 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sdmmc-ecc@ff8c2c00 {
|
|
compatible = "altr,socfpga-sdmmc-ecc";
|
|
reg = <0xff8c2c00 0x400>;
|
|
altr,ecc-parent = <&mmc>;
|
|
interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
|
|
<47 IRQ_TYPE_LEVEL_HIGH>,
|
|
<16 IRQ_TYPE_LEVEL_HIGH>,
|
|
<48 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
Stratix10 SoCFPGA ECC Manager (ARM64)
|
|
The Stratix10 SoC ECC Manager handles the IRQs for each peripheral
|
|
in a shared register similar to the Arria10. However, Stratix10 ECC
|
|
requires access to registers that can only be read from Secure Monitor
|
|
with SMC calls. Therefore the device tree is slightly different. Note
|
|
that only 1 interrupt is sent in Stratix10 because the double bit errors
|
|
are treated as SErrors in ARM64 instead of IRQs in ARM32.
|
|
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-s10-ecc-manager"
|
|
- altr,sysgr-syscon : phandle to Stratix10 System Manager Block
|
|
containing the ECC manager registers.
|
|
- interrupts : Should be single bit error interrupt.
|
|
- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
|
|
- #interrupt-cells : must be set to 2.
|
|
- #address-cells: must be 1
|
|
- #size-cells: must be 1
|
|
- ranges : standard definition, should translate from local addresses
|
|
|
|
Subcomponents:
|
|
|
|
SDRAM ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,sdram-edac-s10"
|
|
- interrupts : Should be single bit error interrupt.
|
|
|
|
On-Chip RAM ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-s10-ocram-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent OCRAM node.
|
|
- interrupts : Should be single bit error interrupt.
|
|
|
|
Ethernet FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-s10-eth-mac-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent Ethernet node.
|
|
- interrupts : Should be single bit error interrupt.
|
|
|
|
NAND FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-s10-nand-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent NAND node.
|
|
- interrupts : Should be single bit error interrupt.
|
|
|
|
DMA FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-s10-dma-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent DMA node.
|
|
- interrupts : Should be single bit error interrupt.
|
|
|
|
USB FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-s10-usb-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent USB node.
|
|
- interrupts : Should be single bit error interrupt.
|
|
|
|
SDMMC FIFO ECC
|
|
Required Properties:
|
|
- compatible : Should be "altr,socfpga-s10-sdmmc-ecc"
|
|
- reg : Address and size for ECC block registers.
|
|
- altr,ecc-parent : phandle to parent SD/MMC node.
|
|
- interrupts : Should be single bit error interrupt for port A
|
|
and then single bit error interrupt for port B.
|
|
|
|
Example:
|
|
|
|
eccmgr {
|
|
compatible = "altr,socfpga-s10-ecc-manager";
|
|
altr,sysmgr-syscon = <&sysmgr>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupts = <0 15 4>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
ranges;
|
|
|
|
sdramedac {
|
|
compatible = "altr,sdram-edac-s10";
|
|
interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
ocram-ecc@ff8cc000 {
|
|
compatible = "altr,socfpga-s10-ocram-ecc";
|
|
reg = <ff8cc000 0x100>;
|
|
altr,ecc-parent = <&ocram>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
emac0-rx-ecc@ff8c0000 {
|
|
compatible = "altr,socfpga-s10-eth-mac-ecc";
|
|
reg = <0xff8c0000 0x100>;
|
|
altr,ecc-parent = <&gmac0>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
emac0-tx-ecc@ff8c0400 {
|
|
compatible = "altr,socfpga-s10-eth-mac-ecc";
|
|
reg = <0xff8c0400 0x100>;
|
|
altr,ecc-parent = <&gmac0>;
|
|
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>'
|
|
};
|
|
|
|
nand-buf-ecc@ff8c8000 {
|
|
compatible = "altr,socfpga-s10-nand-ecc";
|
|
reg = <0xff8c8000 0x100>;
|
|
altr,ecc-parent = <&nand>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
nand-rd-ecc@ff8c8400 {
|
|
compatible = "altr,socfpga-s10-nand-ecc";
|
|
reg = <0xff8c8400 0x100>;
|
|
altr,ecc-parent = <&nand>;
|
|
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
nand-wr-ecc@ff8c8800 {
|
|
compatible = "altr,socfpga-s10-nand-ecc";
|
|
reg = <0xff8c8800 0x100>;
|
|
altr,ecc-parent = <&nand>;
|
|
interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
dma-ecc@ff8c9000 {
|
|
compatible = "altr,socfpga-s10-dma-ecc";
|
|
reg = <0xff8c9000 0x100>;
|
|
altr,ecc-parent = <&pdma>;
|
|
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
usb0-ecc@ff8c4000 {
|
|
compatible = "altr,socfpga-s10-usb-ecc";
|
|
reg = <0xff8c4000 0x100>;
|
|
altr,ecc-parent = <&usb0>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sdmmc-ecc@ff8c8c00 {
|
|
compatible = "altr,socfpga-s10-sdmmc-ecc";
|
|
reg = <0xff8c8c00 0x100>;
|
|
altr,ecc-parent = <&mmc>;
|
|
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
|
|
<15 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|