mirror of https://gitee.com/openkylin/linux.git
163 lines
5.2 KiB
Plaintext
163 lines
5.2 KiB
Plaintext
ROHM BD71837 and BD71847 Power Management Integrated Circuit regulator bindings
|
|
|
|
Required properties:
|
|
- regulator-name: should be "buck1", ..., "buck8" and "ldo1", ..., "ldo7" for
|
|
BD71837. For BD71847 names should be "buck1", ..., "buck6"
|
|
and "ldo1", ..., "ldo6"
|
|
|
|
List of regulators provided by this controller. BD71837 regulators node
|
|
should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at
|
|
Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
|
|
Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
|
|
definition for each of these nodes is defined using the standard
|
|
binding for regulators at
|
|
Documentation/devicetree/bindings/regulator/regulator.txt.
|
|
Note that if BD71837 starts at RUN state you probably want to use
|
|
regulator-boot-on at least for BUCK6 and BUCK7 so that those are not
|
|
disabled by driver at startup. LDO5 and LDO6 are supplied by those and
|
|
if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
|
|
cause PMIC to reset.
|
|
|
|
The valid names for BD71837 regulator nodes are:
|
|
BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8
|
|
LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
|
|
|
|
The valid names for BD71847 regulator nodes are:
|
|
BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
|
|
LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
|
|
|
|
Optional properties:
|
|
- rohm,dvs-run-voltage : PMIC default "RUN" state voltage in uV.
|
|
See below table for bucks which support this.
|
|
- rohm,dvs-idle-voltage : PMIC default "IDLE" state voltage in uV.
|
|
See below table for bucks which support this.
|
|
- rohm,dvs-suspend-voltage : PMIC default "SUSPEND" state voltage in uV.
|
|
See below table for bucks which support this.
|
|
- Any optional property defined in bindings/regulator/regulator.txt
|
|
|
|
Supported default DVS states:
|
|
|
|
BD71837:
|
|
buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
|
|
-----------------------------------------------------------------------------
|
|
1 | supported | supported | supported
|
|
----------------------------------------------------------------------------
|
|
2 | supported | supported | not supported
|
|
----------------------------------------------------------------------------
|
|
3 | supported | not supported | not supported
|
|
----------------------------------------------------------------------------
|
|
4 | supported | not supported | not supported
|
|
----------------------------------------------------------------------------
|
|
rest | not supported | not supported | not supported
|
|
|
|
BD71847:
|
|
buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
|
|
-----------------------------------------------------------------------------
|
|
1 | supported | supported | supported
|
|
----------------------------------------------------------------------------
|
|
2 | supported | supported | not supported
|
|
----------------------------------------------------------------------------
|
|
rest | not supported | not supported | not supported
|
|
|
|
Example:
|
|
regulators {
|
|
buck1: BUCK1 {
|
|
regulator-name = "buck1";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <1250>;
|
|
rohm,dvs-run-voltage = <900000>;
|
|
rohm,dvs-idle-voltage = <850000>;
|
|
rohm,dvs-suspend-voltage = <800000>;
|
|
};
|
|
buck2: BUCK2 {
|
|
regulator-name = "buck2";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <1250>;
|
|
rohm,dvs-run-voltage = <1000000>;
|
|
rohm,dvs-idle-voltage = <900000>;
|
|
};
|
|
buck3: BUCK3 {
|
|
regulator-name = "buck3";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
rohm,dvs-run-voltage = <1000000>;
|
|
};
|
|
buck4: BUCK4 {
|
|
regulator-name = "buck4";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
rohm,dvs-run-voltage = <1000000>;
|
|
};
|
|
buck5: BUCK5 {
|
|
regulator-name = "buck5";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-boot-on;
|
|
};
|
|
buck6: BUCK6 {
|
|
regulator-name = "buck6";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
buck7: BUCK7 {
|
|
regulator-name = "buck7";
|
|
regulator-min-microvolt = <1605000>;
|
|
regulator-max-microvolt = <1995000>;
|
|
regulator-boot-on;
|
|
};
|
|
buck8: BUCK8 {
|
|
regulator-name = "buck8";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
};
|
|
|
|
ldo1: LDO1 {
|
|
regulator-name = "ldo1";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
ldo2: LDO2 {
|
|
regulator-name = "ldo2";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-boot-on;
|
|
};
|
|
ldo3: LDO3 {
|
|
regulator-name = "ldo3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
ldo4: LDO4 {
|
|
regulator-name = "ldo4";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
ldo5: LDO5 {
|
|
regulator-name = "ldo5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
ldo6: LDO6 {
|
|
regulator-name = "ldo6";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "ldo7";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
|