mirror of https://gitee.com/openkylin/linux.git
770 lines
21 KiB
C
770 lines
21 KiB
C
/*
|
|
* CompuLab CM-T35/CM-T3730 modules support
|
|
*
|
|
* Copyright (C) 2009-2011 CompuLab, Ltd.
|
|
* Authors: Mike Rapoport <mike@compulab.co.il>
|
|
* Igor Grinberg <grinberg@compulab.co.il>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/omap-gpmc.h>
|
|
#include <linux/platform_data/gpio-omap.h>
|
|
|
|
#include <linux/platform_data/at24.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/usb/phy.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/tdo24m.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <linux/platform_data/mtd-nand-omap2.h>
|
|
#include <video/omapdss.h>
|
|
#include <video/omap-panel-data.h>
|
|
#include <linux/platform_data/spi-omap2-mcspi.h>
|
|
|
|
#include "common.h"
|
|
#include "mux.h"
|
|
#include "sdram-micron-mt46h32m32lf-6.h"
|
|
#include "hsmmc.h"
|
|
#include "common-board-devices.h"
|
|
|
|
#define CM_T35_GPIO_PENDOWN 57
|
|
#define SB_T35_USB_HUB_RESET_GPIO 167
|
|
|
|
#define CM_T35_SMSC911X_CS 5
|
|
#define CM_T35_SMSC911X_GPIO 163
|
|
#define SB_T35_SMSC911X_CS 4
|
|
#define SB_T35_SMSC911X_GPIO 65
|
|
|
|
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
|
|
#include <linux/smsc911x.h>
|
|
#include "gpmc-smsc911x.h"
|
|
|
|
static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
|
|
.id = 0,
|
|
.cs = CM_T35_SMSC911X_CS,
|
|
.gpio_irq = CM_T35_SMSC911X_GPIO,
|
|
.gpio_reset = -EINVAL,
|
|
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
|
|
};
|
|
|
|
static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
|
|
.id = 1,
|
|
.cs = SB_T35_SMSC911X_CS,
|
|
.gpio_irq = SB_T35_SMSC911X_GPIO,
|
|
.gpio_reset = -EINVAL,
|
|
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
|
|
};
|
|
|
|
static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
|
|
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
|
|
};
|
|
|
|
static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
|
|
REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
|
|
};
|
|
|
|
static void __init cm_t35_init_ethernet(void)
|
|
{
|
|
regulator_register_fixed(0, cm_t35_smsc911x_supplies,
|
|
ARRAY_SIZE(cm_t35_smsc911x_supplies));
|
|
regulator_register_fixed(1, sb_t35_smsc911x_supplies,
|
|
ARRAY_SIZE(sb_t35_smsc911x_supplies));
|
|
|
|
gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
|
|
gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
|
|
}
|
|
#else
|
|
static inline void __init cm_t35_init_ethernet(void) { return; }
|
|
#endif
|
|
|
|
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
|
|
#include <linux/leds.h>
|
|
|
|
static struct gpio_led cm_t35_leds[] = {
|
|
[0] = {
|
|
.gpio = 186,
|
|
.name = "cm-t35:green",
|
|
.default_trigger = "heartbeat",
|
|
.active_low = 0,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data cm_t35_led_pdata = {
|
|
.num_leds = ARRAY_SIZE(cm_t35_leds),
|
|
.leds = cm_t35_leds,
|
|
};
|
|
|
|
static struct platform_device cm_t35_led_device = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &cm_t35_led_pdata,
|
|
},
|
|
};
|
|
|
|
static void __init cm_t35_init_led(void)
|
|
{
|
|
platform_device_register(&cm_t35_led_device);
|
|
}
|
|
#else
|
|
static inline void cm_t35_init_led(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
static struct mtd_partition cm_t35_nand_partitions[] = {
|
|
{
|
|
.name = "xloader",
|
|
.offset = 0, /* Offset = 0x00000 */
|
|
.size = 4 * NAND_BLOCK_SIZE,
|
|
.mask_flags = MTD_WRITEABLE
|
|
},
|
|
{
|
|
.name = "uboot",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
|
|
.size = 15 * NAND_BLOCK_SIZE,
|
|
},
|
|
{
|
|
.name = "uboot environment",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
|
|
.size = 2 * NAND_BLOCK_SIZE,
|
|
},
|
|
{
|
|
.name = "linux",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */
|
|
.size = 32 * NAND_BLOCK_SIZE,
|
|
},
|
|
{
|
|
.name = "rootfs",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct omap_nand_platform_data cm_t35_nand_data = {
|
|
.parts = cm_t35_nand_partitions,
|
|
.nr_parts = ARRAY_SIZE(cm_t35_nand_partitions),
|
|
.cs = 0,
|
|
};
|
|
|
|
static void __init cm_t35_init_nand(void)
|
|
{
|
|
if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
|
|
pr_err("CM-T35: Unable to register NAND device\n");
|
|
}
|
|
#else
|
|
static inline void cm_t35_init_nand(void) {}
|
|
#endif
|
|
|
|
#define CM_T35_LCD_EN_GPIO 157
|
|
#define CM_T35_LCD_BL_GPIO 58
|
|
#define CM_T35_DVI_EN_GPIO 54
|
|
|
|
static const struct display_timing cm_t35_lcd_videomode = {
|
|
.pixelclock = { 0, 26000000, 0 },
|
|
|
|
.hactive = { 0, 480, 0 },
|
|
.hfront_porch = { 0, 104, 0 },
|
|
.hback_porch = { 0, 8, 0 },
|
|
.hsync_len = { 0, 8, 0 },
|
|
|
|
.vactive = { 0, 640, 0 },
|
|
.vfront_porch = { 0, 4, 0 },
|
|
.vback_porch = { 0, 2, 0 },
|
|
.vsync_len = { 0, 2, 0 },
|
|
|
|
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
|
|
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
|
|
};
|
|
|
|
static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
|
|
.name = "lcd",
|
|
.source = "dpi.0",
|
|
|
|
.data_lines = 18,
|
|
|
|
.display_timing = &cm_t35_lcd_videomode,
|
|
|
|
.enable_gpio = -1,
|
|
.backlight_gpio = CM_T35_LCD_BL_GPIO,
|
|
};
|
|
|
|
static struct platform_device cm_t35_lcd_device = {
|
|
.name = "panel-dpi",
|
|
.id = 0,
|
|
.dev.platform_data = &cm_t35_lcd_pdata,
|
|
};
|
|
|
|
static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = {
|
|
.name = "dvi",
|
|
.source = "tfp410.0",
|
|
.i2c_bus_num = -1,
|
|
};
|
|
|
|
static struct platform_device cm_t35_dvi_connector_device = {
|
|
.name = "connector-dvi",
|
|
.id = 0,
|
|
.dev.platform_data = &cm_t35_dvi_connector_pdata,
|
|
};
|
|
|
|
static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = {
|
|
.name = "tfp410.0",
|
|
.source = "dpi.0",
|
|
.data_lines = 24,
|
|
.power_down_gpio = CM_T35_DVI_EN_GPIO,
|
|
};
|
|
|
|
static struct platform_device cm_t35_tfp410_device = {
|
|
.name = "tfp410",
|
|
.id = 0,
|
|
.dev.platform_data = &cm_t35_tfp410_pdata,
|
|
};
|
|
|
|
static struct connector_atv_platform_data cm_t35_tv_pdata = {
|
|
.name = "tv",
|
|
.source = "venc.0",
|
|
.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
|
|
.invert_polarity = false,
|
|
};
|
|
|
|
static struct platform_device cm_t35_tv_connector_device = {
|
|
.name = "connector-analog-tv",
|
|
.id = 0,
|
|
.dev.platform_data = &cm_t35_tv_pdata,
|
|
};
|
|
|
|
static struct omap_dss_board_info cm_t35_dss_data = {
|
|
.default_display_name = "dvi",
|
|
};
|
|
|
|
static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
|
|
.turbo_mode = 0,
|
|
};
|
|
|
|
static struct tdo24m_platform_data tdo24m_config = {
|
|
.model = TDO35S,
|
|
};
|
|
|
|
static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "tdo24m",
|
|
.bus_num = 4,
|
|
.chip_select = 0,
|
|
.max_speed_hz = 1000000,
|
|
.controller_data = &tdo24m_mcspi_config,
|
|
.platform_data = &tdo24m_config,
|
|
},
|
|
};
|
|
|
|
static void __init cm_t35_init_display(void)
|
|
{
|
|
int err;
|
|
|
|
spi_register_board_info(cm_t35_lcd_spi_board_info,
|
|
ARRAY_SIZE(cm_t35_lcd_spi_board_info));
|
|
|
|
|
|
err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,
|
|
"lcd bl enable");
|
|
if (err) {
|
|
pr_err("CM-T35: failed to request LCD EN GPIO\n");
|
|
return;
|
|
}
|
|
|
|
msleep(50);
|
|
gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
|
|
|
|
err = omap_display_init(&cm_t35_dss_data);
|
|
if (err) {
|
|
pr_err("CM-T35: failed to register DSS device\n");
|
|
gpio_free(CM_T35_LCD_EN_GPIO);
|
|
}
|
|
|
|
platform_device_register(&cm_t35_tfp410_device);
|
|
platform_device_register(&cm_t35_dvi_connector_device);
|
|
platform_device_register(&cm_t35_lcd_device);
|
|
platform_device_register(&cm_t35_tv_connector_device);
|
|
}
|
|
|
|
static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
|
|
};
|
|
|
|
static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
|
|
};
|
|
|
|
static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
|
|
REGULATOR_SUPPLY("vcc", "spi1.0"),
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
|
|
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
|
|
};
|
|
|
|
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
|
|
static struct regulator_init_data cm_t35_vmmc1 = {
|
|
.constraints = {
|
|
.min_uV = 1850000,
|
|
.max_uV = 3150000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply),
|
|
.consumer_supplies = cm_t35_vmmc1_supply,
|
|
};
|
|
|
|
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
|
|
static struct regulator_init_data cm_t35_vsim = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 3000000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply),
|
|
.consumer_supplies = cm_t35_vsim_supply,
|
|
};
|
|
|
|
static struct regulator_init_data cm_t35_vio = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies),
|
|
.consumer_supplies = cm_t35_vio_supplies,
|
|
};
|
|
|
|
static uint32_t cm_t35_keymap[] = {
|
|
KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT),
|
|
KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN),
|
|
KEY(2, 0, KEY_RIGHT), KEY(2, 1, KEY_C), KEY(2, 2, KEY_D),
|
|
};
|
|
|
|
static struct matrix_keymap_data cm_t35_keymap_data = {
|
|
.keymap = cm_t35_keymap,
|
|
.keymap_size = ARRAY_SIZE(cm_t35_keymap),
|
|
};
|
|
|
|
static struct twl4030_keypad_data cm_t35_kp_data = {
|
|
.keymap_data = &cm_t35_keymap_data,
|
|
.rows = 3,
|
|
.cols = 3,
|
|
.rep = 1,
|
|
};
|
|
|
|
static struct omap2_hsmmc_info mmc[] = {
|
|
{
|
|
.mmc = 1,
|
|
.caps = MMC_CAP_4_BIT_DATA,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
.deferred = true,
|
|
},
|
|
{
|
|
.mmc = 2,
|
|
.caps = MMC_CAP_4_BIT_DATA,
|
|
.transceiver = 1,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
.ocr_mask = 0x00100000, /* 3.3V */
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static struct usbhs_phy_data phy_data[] __initdata = {
|
|
{
|
|
.port = 1,
|
|
.reset_gpio = OMAP_MAX_GPIO_LINES + 6,
|
|
.vcc_gpio = -EINVAL,
|
|
},
|
|
{
|
|
.port = 2,
|
|
.reset_gpio = OMAP_MAX_GPIO_LINES + 7,
|
|
.vcc_gpio = -EINVAL,
|
|
},
|
|
};
|
|
|
|
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
|
|
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
|
|
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
|
|
};
|
|
|
|
static void __init cm_t35_init_usbh(void)
|
|
{
|
|
int err;
|
|
|
|
err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO,
|
|
GPIOF_OUT_INIT_LOW, "usb hub rst");
|
|
if (err) {
|
|
pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err);
|
|
} else {
|
|
udelay(10);
|
|
gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
|
|
msleep(1);
|
|
}
|
|
|
|
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
|
|
usbhs_init(&usbhs_bdata);
|
|
}
|
|
|
|
static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
|
|
unsigned ngpio)
|
|
{
|
|
int wlan_rst = gpio + 2;
|
|
|
|
if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) {
|
|
gpio_export(wlan_rst, 0);
|
|
udelay(10);
|
|
gpio_set_value_cansleep(wlan_rst, 0);
|
|
udelay(10);
|
|
gpio_set_value_cansleep(wlan_rst, 1);
|
|
} else {
|
|
pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
|
|
}
|
|
|
|
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
|
mmc[0].gpio_cd = gpio + 0;
|
|
omap_hsmmc_late_init(mmc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
|
|
.setup = cm_t35_twl_gpio_setup,
|
|
};
|
|
|
|
static struct twl4030_power_data cm_t35_power_data = {
|
|
.use_poweroff = true,
|
|
};
|
|
|
|
static struct twl4030_platform_data cm_t35_twldata = {
|
|
/* platform_data for children goes here */
|
|
.keypad = &cm_t35_kp_data,
|
|
.gpio = &cm_t35_gpio_data,
|
|
.vmmc1 = &cm_t35_vmmc1,
|
|
.vsim = &cm_t35_vsim,
|
|
.vio = &cm_t35_vio,
|
|
.power = &cm_t35_power_data,
|
|
};
|
|
|
|
#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
|
|
#include <media/omap3isp.h>
|
|
#include "devices.h"
|
|
|
|
static struct isp_platform_subdev cm_t35_isp_subdevs[] = {
|
|
{
|
|
.board_info = &(struct i2c_board_info){
|
|
I2C_BOARD_INFO("mt9t001", 0x5d)
|
|
},
|
|
.i2c_adapter_id = 3,
|
|
.bus = &(struct isp_bus_cfg){
|
|
.interface = ISP_INTERFACE_PARALLEL,
|
|
.bus = {
|
|
.parallel = {
|
|
.clk_pol = 1,
|
|
},
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.board_info = &(struct i2c_board_info){
|
|
I2C_BOARD_INFO("tvp5150", 0x5c),
|
|
},
|
|
.i2c_adapter_id = 3,
|
|
.bus = &(struct isp_bus_cfg){
|
|
.interface = ISP_INTERFACE_PARALLEL,
|
|
.bus = {
|
|
.parallel = {
|
|
.clk_pol = 0,
|
|
},
|
|
},
|
|
},
|
|
},
|
|
{ 0 },
|
|
};
|
|
|
|
static struct isp_platform_data cm_t35_isp_pdata = {
|
|
.subdevs = cm_t35_isp_subdevs,
|
|
};
|
|
|
|
static struct regulator_consumer_supply cm_t35_camera_supplies[] = {
|
|
REGULATOR_SUPPLY("vaa", "3-005d"),
|
|
REGULATOR_SUPPLY("vdd", "3-005d"),
|
|
};
|
|
|
|
static void __init cm_t35_init_camera(void)
|
|
{
|
|
struct clk *clk;
|
|
|
|
clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT,
|
|
48000000);
|
|
clk_register_clkdev(clk, NULL, "3-005d");
|
|
|
|
regulator_register_fixed(2, cm_t35_camera_supplies,
|
|
ARRAY_SIZE(cm_t35_camera_supplies));
|
|
|
|
if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
|
|
pr_warn("CM-T3x: Failed registering camera device!\n");
|
|
}
|
|
|
|
#else
|
|
static inline void cm_t35_init_camera(void) {}
|
|
#endif /* CONFIG_VIDEO_OMAP3 */
|
|
|
|
static void __init cm_t35_init_i2c(void)
|
|
{
|
|
omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
|
|
TWL_COMMON_REGULATOR_VDAC |
|
|
TWL_COMMON_PDATA_AUDIO);
|
|
|
|
omap3_pmic_init("tps65930", &cm_t35_twldata);
|
|
|
|
omap_register_i2c_bus(3, 400, NULL, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
/* nCS and IRQ for CM-T35 ethernet */
|
|
OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
|
|
OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
|
|
|
|
/* nCS and IRQ for SB-T35 ethernet */
|
|
OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0),
|
|
OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
|
|
|
|
/* PENDOWN GPIO */
|
|
OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
|
|
|
|
/* mUSB */
|
|
OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
|
|
/* MMC 2 */
|
|
OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
|
|
|
|
/* McSPI 1 */
|
|
OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
|
|
|
|
/* McSPI 4 */
|
|
OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
|
|
|
|
/* McBSP 2 */
|
|
OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
|
|
/* serial ports */
|
|
OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
|
|
/* common DSS */
|
|
OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
|
|
|
|
/* Camera */
|
|
OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
|
|
OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
|
|
OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
|
|
|
|
OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
|
|
OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
|
|
|
|
/* display controls */
|
|
OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
|
|
OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
|
|
|
|
/* TPS IRQ */
|
|
OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
|
|
OMAP_PIN_INPUT_PULLUP),
|
|
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
|
|
static void __init cm_t3x_common_dss_mux_init(int mux_mode)
|
|
{
|
|
omap_mux_init_signal("dss_data18", mux_mode);
|
|
omap_mux_init_signal("dss_data19", mux_mode);
|
|
omap_mux_init_signal("dss_data20", mux_mode);
|
|
omap_mux_init_signal("dss_data21", mux_mode);
|
|
omap_mux_init_signal("dss_data22", mux_mode);
|
|
omap_mux_init_signal("dss_data23", mux_mode);
|
|
}
|
|
|
|
static void __init cm_t35_init_mux(void)
|
|
{
|
|
int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT;
|
|
|
|
omap_mux_init_signal("dss_data0.dss_data0", mux_mode);
|
|
omap_mux_init_signal("dss_data1.dss_data1", mux_mode);
|
|
omap_mux_init_signal("dss_data2.dss_data2", mux_mode);
|
|
omap_mux_init_signal("dss_data3.dss_data3", mux_mode);
|
|
omap_mux_init_signal("dss_data4.dss_data4", mux_mode);
|
|
omap_mux_init_signal("dss_data5.dss_data5", mux_mode);
|
|
cm_t3x_common_dss_mux_init(mux_mode);
|
|
}
|
|
|
|
static void __init cm_t3730_init_mux(void)
|
|
{
|
|
int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT;
|
|
|
|
omap_mux_init_signal("sys_boot0", mux_mode);
|
|
omap_mux_init_signal("sys_boot1", mux_mode);
|
|
omap_mux_init_signal("sys_boot3", mux_mode);
|
|
omap_mux_init_signal("sys_boot4", mux_mode);
|
|
omap_mux_init_signal("sys_boot5", mux_mode);
|
|
omap_mux_init_signal("sys_boot6", mux_mode);
|
|
cm_t3x_common_dss_mux_init(mux_mode);
|
|
}
|
|
#else
|
|
static inline void cm_t35_init_mux(void) {}
|
|
static inline void cm_t3730_init_mux(void) {}
|
|
#endif
|
|
|
|
static void __init cm_t3x_common_init(void)
|
|
{
|
|
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
|
|
omap_serial_init();
|
|
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
|
|
mt46h32m32lf6_sdrc_params);
|
|
omap_hsmmc_init(mmc);
|
|
cm_t35_init_i2c();
|
|
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
|
|
cm_t35_init_ethernet();
|
|
cm_t35_init_led();
|
|
cm_t35_init_display();
|
|
omap_twl4030_audio_init("cm-t3x", NULL);
|
|
|
|
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
|
|
usb_musb_init(NULL);
|
|
cm_t35_init_usbh();
|
|
cm_t35_init_camera();
|
|
}
|
|
|
|
static void __init cm_t35_init(void)
|
|
{
|
|
cm_t3x_common_init();
|
|
cm_t35_init_mux();
|
|
cm_t35_init_nand();
|
|
}
|
|
|
|
static void __init cm_t3730_init(void)
|
|
{
|
|
cm_t3x_common_init();
|
|
cm_t3730_init_mux();
|
|
}
|
|
|
|
MACHINE_START(CM_T35, "Compulab CM-T35")
|
|
.atag_offset = 0x100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap3_map_io,
|
|
.init_early = omap35xx_init_early,
|
|
.init_irq = omap3_init_irq,
|
|
.init_machine = cm_t35_init,
|
|
.init_late = omap35xx_init_late,
|
|
.init_time = omap3_sync32k_timer_init,
|
|
.restart = omap3xxx_restart,
|
|
MACHINE_END
|
|
|
|
MACHINE_START(CM_T3730, "Compulab CM-T3730")
|
|
.atag_offset = 0x100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap3_map_io,
|
|
.init_early = omap3630_init_early,
|
|
.init_irq = omap3_init_irq,
|
|
.init_machine = cm_t3730_init,
|
|
.init_late = omap3630_init_late,
|
|
.init_time = omap3_sync32k_timer_init,
|
|
.restart = omap3xxx_restart,
|
|
MACHINE_END
|