mirror of https://gitee.com/openkylin/linux.git
1978 lines
49 KiB
C
1978 lines
49 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
*Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/console.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/nmi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/debugfs.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/pch_dma.h>
|
|
|
|
enum {
|
|
PCH_UART_HANDLED_RX_INT_SHIFT,
|
|
PCH_UART_HANDLED_TX_INT_SHIFT,
|
|
PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
|
|
PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
|
|
PCH_UART_HANDLED_MS_INT_SHIFT,
|
|
PCH_UART_HANDLED_LS_INT_SHIFT,
|
|
};
|
|
|
|
#define PCH_UART_DRIVER_DEVICE "ttyPCH"
|
|
|
|
/* Set the max number of UART port
|
|
* Intel EG20T PCH: 4 port
|
|
* LAPIS Semiconductor ML7213 IOH: 3 port
|
|
* LAPIS Semiconductor ML7223 IOH: 2 port
|
|
*/
|
|
#define PCH_UART_NR 4
|
|
|
|
#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
|
|
#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
|
|
#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\
|
|
PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1))
|
|
#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\
|
|
PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
|
|
#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
|
|
|
|
#define PCH_UART_HANDLED_LS_INT (1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1))
|
|
|
|
#define PCH_UART_RBR 0x00
|
|
#define PCH_UART_THR 0x00
|
|
|
|
#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\
|
|
PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI)
|
|
#define PCH_UART_IER_ERBFI 0x00000001
|
|
#define PCH_UART_IER_ETBEI 0x00000002
|
|
#define PCH_UART_IER_ELSI 0x00000004
|
|
#define PCH_UART_IER_EDSSI 0x00000008
|
|
|
|
#define PCH_UART_IIR_IP 0x00000001
|
|
#define PCH_UART_IIR_IID 0x00000006
|
|
#define PCH_UART_IIR_MSI 0x00000000
|
|
#define PCH_UART_IIR_TRI 0x00000002
|
|
#define PCH_UART_IIR_RRI 0x00000004
|
|
#define PCH_UART_IIR_REI 0x00000006
|
|
#define PCH_UART_IIR_TOI 0x00000008
|
|
#define PCH_UART_IIR_FIFO256 0x00000020
|
|
#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256
|
|
#define PCH_UART_IIR_FE 0x000000C0
|
|
|
|
#define PCH_UART_FCR_FIFOE 0x00000001
|
|
#define PCH_UART_FCR_RFR 0x00000002
|
|
#define PCH_UART_FCR_TFR 0x00000004
|
|
#define PCH_UART_FCR_DMS 0x00000008
|
|
#define PCH_UART_FCR_FIFO256 0x00000020
|
|
#define PCH_UART_FCR_RFTL 0x000000C0
|
|
|
|
#define PCH_UART_FCR_RFTL1 0x00000000
|
|
#define PCH_UART_FCR_RFTL64 0x00000040
|
|
#define PCH_UART_FCR_RFTL128 0x00000080
|
|
#define PCH_UART_FCR_RFTL224 0x000000C0
|
|
#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64
|
|
#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128
|
|
#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224
|
|
#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64
|
|
#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128
|
|
#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224
|
|
#define PCH_UART_FCR_RFTL_SHIFT 6
|
|
|
|
#define PCH_UART_LCR_WLS 0x00000003
|
|
#define PCH_UART_LCR_STB 0x00000004
|
|
#define PCH_UART_LCR_PEN 0x00000008
|
|
#define PCH_UART_LCR_EPS 0x00000010
|
|
#define PCH_UART_LCR_SP 0x00000020
|
|
#define PCH_UART_LCR_SB 0x00000040
|
|
#define PCH_UART_LCR_DLAB 0x00000080
|
|
#define PCH_UART_LCR_NP 0x00000000
|
|
#define PCH_UART_LCR_OP PCH_UART_LCR_PEN
|
|
#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS)
|
|
#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP)
|
|
#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\
|
|
PCH_UART_LCR_SP)
|
|
|
|
#define PCH_UART_LCR_5BIT 0x00000000
|
|
#define PCH_UART_LCR_6BIT 0x00000001
|
|
#define PCH_UART_LCR_7BIT 0x00000002
|
|
#define PCH_UART_LCR_8BIT 0x00000003
|
|
|
|
#define PCH_UART_MCR_DTR 0x00000001
|
|
#define PCH_UART_MCR_RTS 0x00000002
|
|
#define PCH_UART_MCR_OUT 0x0000000C
|
|
#define PCH_UART_MCR_LOOP 0x00000010
|
|
#define PCH_UART_MCR_AFE 0x00000020
|
|
|
|
#define PCH_UART_LSR_DR 0x00000001
|
|
#define PCH_UART_LSR_ERR (1<<7)
|
|
|
|
#define PCH_UART_MSR_DCTS 0x00000001
|
|
#define PCH_UART_MSR_DDSR 0x00000002
|
|
#define PCH_UART_MSR_TERI 0x00000004
|
|
#define PCH_UART_MSR_DDCD 0x00000008
|
|
#define PCH_UART_MSR_CTS 0x00000010
|
|
#define PCH_UART_MSR_DSR 0x00000020
|
|
#define PCH_UART_MSR_RI 0x00000040
|
|
#define PCH_UART_MSR_DCD 0x00000080
|
|
#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\
|
|
PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD)
|
|
|
|
#define PCH_UART_DLL 0x00
|
|
#define PCH_UART_DLM 0x01
|
|
|
|
#define PCH_UART_BRCSR 0x0E
|
|
|
|
#define PCH_UART_IID_RLS (PCH_UART_IIR_REI)
|
|
#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI)
|
|
#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
|
|
#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI)
|
|
#define PCH_UART_IID_MS (PCH_UART_IIR_MSI)
|
|
|
|
#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP)
|
|
#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP)
|
|
#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP)
|
|
#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P)
|
|
#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P)
|
|
#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT)
|
|
#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT)
|
|
#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT)
|
|
#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT)
|
|
#define PCH_UART_HAL_STB1 0
|
|
#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB)
|
|
|
|
#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR)
|
|
#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR)
|
|
#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \
|
|
PCH_UART_HAL_CLR_RX_FIFO)
|
|
|
|
#define PCH_UART_HAL_DMA_MODE0 0
|
|
#define PCH_UART_HAL_FIFO_DIS 0
|
|
#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE)
|
|
#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \
|
|
PCH_UART_FCR_FIFO256)
|
|
#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256)
|
|
#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1)
|
|
#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64)
|
|
#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128)
|
|
#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224)
|
|
#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16)
|
|
#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32)
|
|
#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56)
|
|
#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4)
|
|
#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8)
|
|
#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14)
|
|
#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64)
|
|
#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128)
|
|
#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224)
|
|
|
|
#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI)
|
|
#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI)
|
|
#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI)
|
|
#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI)
|
|
#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK)
|
|
|
|
#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR)
|
|
#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS)
|
|
#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT)
|
|
#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP)
|
|
#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE)
|
|
|
|
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
|
|
|
|
#define DEFAULT_UARTCLK 1843200 /* 1.8432 MHz */
|
|
#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */
|
|
#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */
|
|
#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */
|
|
#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */
|
|
#define MINNOW_UARTCLK 50000000 /* 50.0000 MHz */
|
|
|
|
struct pch_uart_buffer {
|
|
unsigned char *buf;
|
|
int size;
|
|
};
|
|
|
|
struct eg20t_port {
|
|
struct uart_port port;
|
|
int port_type;
|
|
void __iomem *membase;
|
|
resource_size_t mapbase;
|
|
unsigned int iobase;
|
|
struct pci_dev *pdev;
|
|
int fifo_size;
|
|
unsigned int uartclk;
|
|
int start_tx;
|
|
int start_rx;
|
|
int tx_empty;
|
|
int trigger;
|
|
int trigger_level;
|
|
struct pch_uart_buffer rxbuf;
|
|
unsigned int dmsr;
|
|
unsigned int fcr;
|
|
unsigned int mcr;
|
|
unsigned int use_dma;
|
|
struct dma_async_tx_descriptor *desc_tx;
|
|
struct dma_async_tx_descriptor *desc_rx;
|
|
struct pch_dma_slave param_tx;
|
|
struct pch_dma_slave param_rx;
|
|
struct dma_chan *chan_tx;
|
|
struct dma_chan *chan_rx;
|
|
struct scatterlist *sg_tx_p;
|
|
int nent;
|
|
int orig_nent;
|
|
struct scatterlist sg_rx;
|
|
int tx_dma_use;
|
|
void *rx_buf_virt;
|
|
dma_addr_t rx_buf_dma;
|
|
|
|
struct dentry *debugfs;
|
|
#define IRQ_NAME_SIZE 17
|
|
char irq_name[IRQ_NAME_SIZE];
|
|
|
|
/* protect the eg20t_port private structure and io access to membase */
|
|
spinlock_t lock;
|
|
};
|
|
|
|
/**
|
|
* struct pch_uart_driver_data - private data structure for UART-DMA
|
|
* @port_type: The type of UART port
|
|
* @line_no: UART port line number (0, 1, 2...)
|
|
*/
|
|
struct pch_uart_driver_data {
|
|
int port_type;
|
|
int line_no;
|
|
};
|
|
|
|
enum pch_uart_num_t {
|
|
pch_et20t_uart0 = 0,
|
|
pch_et20t_uart1,
|
|
pch_et20t_uart2,
|
|
pch_et20t_uart3,
|
|
pch_ml7213_uart0,
|
|
pch_ml7213_uart1,
|
|
pch_ml7213_uart2,
|
|
pch_ml7223_uart0,
|
|
pch_ml7223_uart1,
|
|
pch_ml7831_uart0,
|
|
pch_ml7831_uart1,
|
|
};
|
|
|
|
static struct pch_uart_driver_data drv_dat[] = {
|
|
[pch_et20t_uart0] = {PORT_PCH_8LINE, 0},
|
|
[pch_et20t_uart1] = {PORT_PCH_2LINE, 1},
|
|
[pch_et20t_uart2] = {PORT_PCH_2LINE, 2},
|
|
[pch_et20t_uart3] = {PORT_PCH_2LINE, 3},
|
|
[pch_ml7213_uart0] = {PORT_PCH_8LINE, 0},
|
|
[pch_ml7213_uart1] = {PORT_PCH_2LINE, 1},
|
|
[pch_ml7213_uart2] = {PORT_PCH_2LINE, 2},
|
|
[pch_ml7223_uart0] = {PORT_PCH_8LINE, 0},
|
|
[pch_ml7223_uart1] = {PORT_PCH_2LINE, 1},
|
|
[pch_ml7831_uart0] = {PORT_PCH_8LINE, 0},
|
|
[pch_ml7831_uart1] = {PORT_PCH_2LINE, 1},
|
|
};
|
|
|
|
#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
|
|
static struct eg20t_port *pch_uart_ports[PCH_UART_NR];
|
|
#endif
|
|
static unsigned int default_baud = 9600;
|
|
static unsigned int user_uartclk = 0;
|
|
static const int trigger_level_256[4] = { 1, 64, 128, 224 };
|
|
static const int trigger_level_64[4] = { 1, 16, 32, 56 };
|
|
static const int trigger_level_16[4] = { 1, 4, 8, 14 };
|
|
static const int trigger_level_1[4] = { 1, 1, 1, 1 };
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
#define PCH_REGS_BUFSIZE 1024
|
|
|
|
|
|
static ssize_t port_show_regs(struct file *file, char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct eg20t_port *priv = file->private_data;
|
|
char *buf;
|
|
u32 len = 0;
|
|
ssize_t ret;
|
|
unsigned char lcr;
|
|
|
|
buf = kzalloc(PCH_REGS_BUFSIZE, GFP_KERNEL);
|
|
if (!buf)
|
|
return 0;
|
|
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"PCH EG20T port[%d] regs:\n", priv->port.line);
|
|
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"=================================\n");
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"IER: \t0x%02x\n", ioread8(priv->membase + UART_IER));
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"IIR: \t0x%02x\n", ioread8(priv->membase + UART_IIR));
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"LCR: \t0x%02x\n", ioread8(priv->membase + UART_LCR));
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"MCR: \t0x%02x\n", ioread8(priv->membase + UART_MCR));
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"LSR: \t0x%02x\n", ioread8(priv->membase + UART_LSR));
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR));
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"BRCSR: \t0x%02x\n",
|
|
ioread8(priv->membase + PCH_UART_BRCSR));
|
|
|
|
lcr = ioread8(priv->membase + UART_LCR);
|
|
iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"DLL: \t0x%02x\n", ioread8(priv->membase + UART_DLL));
|
|
len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
|
|
"DLM: \t0x%02x\n", ioread8(priv->membase + UART_DLM));
|
|
iowrite8(lcr, priv->membase + UART_LCR);
|
|
|
|
if (len > PCH_REGS_BUFSIZE)
|
|
len = PCH_REGS_BUFSIZE;
|
|
|
|
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
static const struct file_operations port_regs_ops = {
|
|
.owner = THIS_MODULE,
|
|
.open = simple_open,
|
|
.read = port_show_regs,
|
|
.llseek = default_llseek,
|
|
};
|
|
#endif /* CONFIG_DEBUG_FS */
|
|
|
|
static const struct dmi_system_id pch_uart_dmi_table[] = {
|
|
{
|
|
.ident = "CM-iTC",
|
|
{
|
|
DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"),
|
|
},
|
|
(void *)CMITC_UARTCLK,
|
|
},
|
|
{
|
|
.ident = "FRI2",
|
|
{
|
|
DMI_MATCH(DMI_BIOS_VERSION, "FRI2"),
|
|
},
|
|
(void *)FRI2_64_UARTCLK,
|
|
},
|
|
{
|
|
.ident = "Fish River Island II",
|
|
{
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"),
|
|
},
|
|
(void *)FRI2_48_UARTCLK,
|
|
},
|
|
{
|
|
.ident = "COMe-mTT",
|
|
{
|
|
DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"),
|
|
},
|
|
(void *)NTC1_UARTCLK,
|
|
},
|
|
{
|
|
.ident = "nanoETXexpress-TT",
|
|
{
|
|
DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"),
|
|
},
|
|
(void *)NTC1_UARTCLK,
|
|
},
|
|
{
|
|
.ident = "MinnowBoard",
|
|
{
|
|
DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
|
|
},
|
|
(void *)MINNOW_UARTCLK,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
/* Return UART clock, checking for board specific clocks. */
|
|
static unsigned int pch_uart_get_uartclk(void)
|
|
{
|
|
const struct dmi_system_id *d;
|
|
|
|
if (user_uartclk)
|
|
return user_uartclk;
|
|
|
|
d = dmi_first_match(pch_uart_dmi_table);
|
|
if (d)
|
|
return (unsigned long)d->driver_data;
|
|
|
|
return DEFAULT_UARTCLK;
|
|
}
|
|
|
|
static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv,
|
|
unsigned int flag)
|
|
{
|
|
u8 ier = ioread8(priv->membase + UART_IER);
|
|
ier |= flag & PCH_UART_IER_MASK;
|
|
iowrite8(ier, priv->membase + UART_IER);
|
|
}
|
|
|
|
static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv,
|
|
unsigned int flag)
|
|
{
|
|
u8 ier = ioread8(priv->membase + UART_IER);
|
|
ier &= ~(flag & PCH_UART_IER_MASK);
|
|
iowrite8(ier, priv->membase + UART_IER);
|
|
}
|
|
|
|
static int pch_uart_hal_set_line(struct eg20t_port *priv, unsigned int baud,
|
|
unsigned int parity, unsigned int bits,
|
|
unsigned int stb)
|
|
{
|
|
unsigned int dll, dlm, lcr;
|
|
int div;
|
|
|
|
div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud);
|
|
if (div < 0 || USHRT_MAX <= div) {
|
|
dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dll = (unsigned int)div & 0x00FFU;
|
|
dlm = ((unsigned int)div >> 8) & 0x00FFU;
|
|
|
|
if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
|
|
dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (bits & ~PCH_UART_LCR_WLS) {
|
|
dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (stb & ~PCH_UART_LCR_STB) {
|
|
dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
lcr = parity;
|
|
lcr |= bits;
|
|
lcr |= stb;
|
|
|
|
dev_dbg(priv->port.dev, "%s:baud = %u, div = %04x, lcr = %02x (%lu)\n",
|
|
__func__, baud, div, lcr, jiffies);
|
|
iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
|
|
iowrite8(dll, priv->membase + PCH_UART_DLL);
|
|
iowrite8(dlm, priv->membase + PCH_UART_DLM);
|
|
iowrite8(lcr, priv->membase + UART_LCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
|
|
unsigned int flag)
|
|
{
|
|
if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
|
|
dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
|
|
__func__, flag);
|
|
return -EINVAL;
|
|
}
|
|
|
|
iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR);
|
|
iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag,
|
|
priv->membase + UART_FCR);
|
|
iowrite8(priv->fcr, priv->membase + UART_FCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
|
|
unsigned int dmamode,
|
|
unsigned int fifo_size, unsigned int trigger)
|
|
{
|
|
u8 fcr;
|
|
|
|
if (dmamode & ~PCH_UART_FCR_DMS) {
|
|
dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
|
|
__func__, dmamode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
|
|
dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
|
|
__func__, fifo_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (trigger & ~PCH_UART_FCR_RFTL) {
|
|
dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
|
|
__func__, trigger);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (priv->fifo_size) {
|
|
case 256:
|
|
priv->trigger_level =
|
|
trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT];
|
|
break;
|
|
case 64:
|
|
priv->trigger_level =
|
|
trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT];
|
|
break;
|
|
case 16:
|
|
priv->trigger_level =
|
|
trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT];
|
|
break;
|
|
default:
|
|
priv->trigger_level =
|
|
trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT];
|
|
break;
|
|
}
|
|
fcr =
|
|
dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR;
|
|
iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR);
|
|
iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR,
|
|
priv->membase + UART_FCR);
|
|
iowrite8(fcr, priv->membase + UART_FCR);
|
|
priv->fcr = fcr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
|
|
{
|
|
unsigned int msr = ioread8(priv->membase + UART_MSR);
|
|
priv->dmsr = msr & PCH_UART_MSR_DELTA;
|
|
return (u8)msr;
|
|
}
|
|
|
|
static void pch_uart_hal_write(struct eg20t_port *priv,
|
|
const unsigned char *buf, int tx_size)
|
|
{
|
|
int i;
|
|
unsigned int thr;
|
|
|
|
for (i = 0; i < tx_size;) {
|
|
thr = buf[i++];
|
|
iowrite8(thr, priv->membase + PCH_UART_THR);
|
|
}
|
|
}
|
|
|
|
static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
|
|
int rx_size)
|
|
{
|
|
int i;
|
|
u8 rbr, lsr;
|
|
struct uart_port *port = &priv->port;
|
|
|
|
lsr = ioread8(priv->membase + UART_LSR);
|
|
for (i = 0, lsr = ioread8(priv->membase + UART_LSR);
|
|
i < rx_size && lsr & (UART_LSR_DR | UART_LSR_BI);
|
|
lsr = ioread8(priv->membase + UART_LSR)) {
|
|
rbr = ioread8(priv->membase + PCH_UART_RBR);
|
|
|
|
if (lsr & UART_LSR_BI) {
|
|
port->icount.brk++;
|
|
if (uart_handle_break(port))
|
|
continue;
|
|
}
|
|
if (uart_handle_sysrq_char(port, rbr))
|
|
continue;
|
|
|
|
buf[i++] = rbr;
|
|
}
|
|
return i;
|
|
}
|
|
|
|
static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv)
|
|
{
|
|
return ioread8(priv->membase + UART_IIR) &\
|
|
(PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP);
|
|
}
|
|
|
|
static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
|
|
{
|
|
return ioread8(priv->membase + UART_LSR);
|
|
}
|
|
|
|
static void pch_uart_hal_set_break(struct eg20t_port *priv, int on)
|
|
{
|
|
unsigned int lcr;
|
|
|
|
lcr = ioread8(priv->membase + UART_LCR);
|
|
if (on)
|
|
lcr |= PCH_UART_LCR_SB;
|
|
else
|
|
lcr &= ~PCH_UART_LCR_SB;
|
|
|
|
iowrite8(lcr, priv->membase + UART_LCR);
|
|
}
|
|
|
|
static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
|
|
int size)
|
|
{
|
|
struct uart_port *port = &priv->port;
|
|
struct tty_port *tport = &port->state->port;
|
|
|
|
tty_insert_flip_string(tport, buf, size);
|
|
tty_flip_buffer_push(tport);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
|
|
{
|
|
int ret = 0;
|
|
struct uart_port *port = &priv->port;
|
|
|
|
if (port->x_char) {
|
|
dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
|
|
__func__, port->x_char, jiffies);
|
|
buf[0] = port->x_char;
|
|
port->x_char = 0;
|
|
ret = 1;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dma_push_rx(struct eg20t_port *priv, int size)
|
|
{
|
|
int room;
|
|
struct uart_port *port = &priv->port;
|
|
struct tty_port *tport = &port->state->port;
|
|
|
|
room = tty_buffer_request_room(tport, size);
|
|
|
|
if (room < size)
|
|
dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
|
|
size - room);
|
|
if (!room)
|
|
return 0;
|
|
|
|
tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size);
|
|
|
|
port->icount.rx += room;
|
|
|
|
return room;
|
|
}
|
|
|
|
static void pch_free_dma(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
|
|
if (priv->chan_tx) {
|
|
dma_release_channel(priv->chan_tx);
|
|
priv->chan_tx = NULL;
|
|
}
|
|
if (priv->chan_rx) {
|
|
dma_release_channel(priv->chan_rx);
|
|
priv->chan_rx = NULL;
|
|
}
|
|
|
|
if (priv->rx_buf_dma) {
|
|
dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt,
|
|
priv->rx_buf_dma);
|
|
priv->rx_buf_virt = NULL;
|
|
priv->rx_buf_dma = 0;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static bool filter(struct dma_chan *chan, void *slave)
|
|
{
|
|
struct pch_dma_slave *param = slave;
|
|
|
|
if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
|
|
chan->device->dev)) {
|
|
chan->private = param;
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void pch_request_dma(struct uart_port *port)
|
|
{
|
|
dma_cap_mask_t mask;
|
|
struct dma_chan *chan;
|
|
struct pci_dev *dma_dev;
|
|
struct pch_dma_slave *param;
|
|
struct eg20t_port *priv =
|
|
container_of(port, struct eg20t_port, port);
|
|
dma_cap_zero(mask);
|
|
dma_cap_set(DMA_SLAVE, mask);
|
|
|
|
/* Get DMA's dev information */
|
|
dma_dev = pci_get_slot(priv->pdev->bus,
|
|
PCI_DEVFN(PCI_SLOT(priv->pdev->devfn), 0));
|
|
|
|
/* Set Tx DMA */
|
|
param = &priv->param_tx;
|
|
param->dma_dev = &dma_dev->dev;
|
|
param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
|
|
|
|
param->tx_reg = port->mapbase + UART_TX;
|
|
chan = dma_request_channel(mask, filter, param);
|
|
if (!chan) {
|
|
dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
priv->chan_tx = chan;
|
|
|
|
/* Set Rx DMA */
|
|
param = &priv->param_rx;
|
|
param->dma_dev = &dma_dev->dev;
|
|
param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
|
|
|
|
param->rx_reg = port->mapbase + UART_RX;
|
|
chan = dma_request_channel(mask, filter, param);
|
|
if (!chan) {
|
|
dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
|
|
__func__);
|
|
dma_release_channel(priv->chan_tx);
|
|
priv->chan_tx = NULL;
|
|
return;
|
|
}
|
|
|
|
/* Get Consistent memory for DMA */
|
|
priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
|
|
&priv->rx_buf_dma, GFP_KERNEL);
|
|
priv->chan_rx = chan;
|
|
}
|
|
|
|
static void pch_dma_rx_complete(void *arg)
|
|
{
|
|
struct eg20t_port *priv = arg;
|
|
struct uart_port *port = &priv->port;
|
|
int count;
|
|
|
|
dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
|
|
count = dma_push_rx(priv, priv->trigger_level);
|
|
if (count)
|
|
tty_flip_buffer_push(&port->state->port);
|
|
async_tx_ack(priv->desc_rx);
|
|
pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
|
|
PCH_UART_HAL_RX_ERR_INT);
|
|
}
|
|
|
|
static void pch_dma_tx_complete(void *arg)
|
|
{
|
|
struct eg20t_port *priv = arg;
|
|
struct uart_port *port = &priv->port;
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
struct scatterlist *sg = priv->sg_tx_p;
|
|
int i;
|
|
|
|
for (i = 0; i < priv->nent; i++, sg++) {
|
|
xmit->tail += sg_dma_len(sg);
|
|
port->icount.tx += sg_dma_len(sg);
|
|
}
|
|
xmit->tail &= UART_XMIT_SIZE - 1;
|
|
async_tx_ack(priv->desc_tx);
|
|
dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE);
|
|
priv->tx_dma_use = 0;
|
|
priv->nent = 0;
|
|
priv->orig_nent = 0;
|
|
kfree(priv->sg_tx_p);
|
|
pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
|
|
}
|
|
|
|
static int pop_tx(struct eg20t_port *priv, int size)
|
|
{
|
|
int count = 0;
|
|
struct uart_port *port = &priv->port;
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
|
|
if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size)
|
|
goto pop_tx_end;
|
|
|
|
do {
|
|
int cnt_to_end =
|
|
CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
|
|
int sz = min(size - count, cnt_to_end);
|
|
pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz);
|
|
xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
|
|
count += sz;
|
|
} while (!uart_circ_empty(xmit) && count < size);
|
|
|
|
pop_tx_end:
|
|
dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n",
|
|
count, size - count, jiffies);
|
|
|
|
return count;
|
|
}
|
|
|
|
static int handle_rx_to(struct eg20t_port *priv)
|
|
{
|
|
struct pch_uart_buffer *buf;
|
|
int rx_size;
|
|
int ret;
|
|
if (!priv->start_rx) {
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
|
|
PCH_UART_HAL_RX_ERR_INT);
|
|
return 0;
|
|
}
|
|
buf = &priv->rxbuf;
|
|
do {
|
|
rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
|
|
ret = push_rx(priv, buf->buf, rx_size);
|
|
if (ret)
|
|
return 0;
|
|
} while (rx_size == buf->size);
|
|
|
|
return PCH_UART_HANDLED_RX_INT;
|
|
}
|
|
|
|
static int handle_rx(struct eg20t_port *priv)
|
|
{
|
|
return handle_rx_to(priv);
|
|
}
|
|
|
|
static int dma_handle_rx(struct eg20t_port *priv)
|
|
{
|
|
struct uart_port *port = &priv->port;
|
|
struct dma_async_tx_descriptor *desc;
|
|
struct scatterlist *sg;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
sg = &priv->sg_rx;
|
|
|
|
sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
|
|
|
|
sg_dma_len(sg) = priv->trigger_level;
|
|
|
|
sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
|
|
sg_dma_len(sg), offset_in_page(priv->rx_buf_virt));
|
|
|
|
sg_dma_address(sg) = priv->rx_buf_dma;
|
|
|
|
desc = dmaengine_prep_slave_sg(priv->chan_rx,
|
|
sg, 1, DMA_DEV_TO_MEM,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
|
|
if (!desc)
|
|
return 0;
|
|
|
|
priv->desc_rx = desc;
|
|
desc->callback = pch_dma_rx_complete;
|
|
desc->callback_param = priv;
|
|
desc->tx_submit(desc);
|
|
dma_async_issue_pending(priv->chan_rx);
|
|
|
|
return PCH_UART_HANDLED_RX_INT;
|
|
}
|
|
|
|
static unsigned int handle_tx(struct eg20t_port *priv)
|
|
{
|
|
struct uart_port *port = &priv->port;
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
int fifo_size;
|
|
int tx_size;
|
|
int size;
|
|
int tx_empty;
|
|
|
|
if (!priv->start_tx) {
|
|
dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
|
|
__func__, jiffies);
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
|
|
priv->tx_empty = 1;
|
|
return 0;
|
|
}
|
|
|
|
fifo_size = max(priv->fifo_size, 1);
|
|
tx_empty = 1;
|
|
if (pop_tx_x(priv, xmit->buf)) {
|
|
pch_uart_hal_write(priv, xmit->buf, 1);
|
|
port->icount.tx++;
|
|
tx_empty = 0;
|
|
fifo_size--;
|
|
}
|
|
size = min(xmit->head - xmit->tail, fifo_size);
|
|
if (size < 0)
|
|
size = fifo_size;
|
|
|
|
tx_size = pop_tx(priv, size);
|
|
if (tx_size > 0) {
|
|
port->icount.tx += tx_size;
|
|
tx_empty = 0;
|
|
}
|
|
|
|
priv->tx_empty = tx_empty;
|
|
|
|
if (tx_empty) {
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
|
|
uart_write_wakeup(port);
|
|
}
|
|
|
|
return PCH_UART_HANDLED_TX_INT;
|
|
}
|
|
|
|
static unsigned int dma_handle_tx(struct eg20t_port *priv)
|
|
{
|
|
struct uart_port *port = &priv->port;
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
struct scatterlist *sg;
|
|
int nent;
|
|
int fifo_size;
|
|
struct dma_async_tx_descriptor *desc;
|
|
int num;
|
|
int i;
|
|
int bytes;
|
|
int size;
|
|
int rem;
|
|
|
|
if (!priv->start_tx) {
|
|
dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
|
|
__func__, jiffies);
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
|
|
priv->tx_empty = 1;
|
|
return 0;
|
|
}
|
|
|
|
if (priv->tx_dma_use) {
|
|
dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
|
|
__func__, jiffies);
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
|
|
priv->tx_empty = 1;
|
|
return 0;
|
|
}
|
|
|
|
fifo_size = max(priv->fifo_size, 1);
|
|
if (pop_tx_x(priv, xmit->buf)) {
|
|
pch_uart_hal_write(priv, xmit->buf, 1);
|
|
port->icount.tx++;
|
|
fifo_size--;
|
|
}
|
|
|
|
bytes = min((int)CIRC_CNT(xmit->head, xmit->tail,
|
|
UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
|
|
xmit->tail, UART_XMIT_SIZE));
|
|
if (!bytes) {
|
|
dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
|
|
uart_write_wakeup(port);
|
|
return 0;
|
|
}
|
|
|
|
if (bytes > fifo_size) {
|
|
num = bytes / fifo_size + 1;
|
|
size = fifo_size;
|
|
rem = bytes % fifo_size;
|
|
} else {
|
|
num = 1;
|
|
size = bytes;
|
|
rem = bytes;
|
|
}
|
|
|
|
dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
|
|
__func__, num, size, rem);
|
|
|
|
priv->tx_dma_use = 1;
|
|
|
|
priv->sg_tx_p = kcalloc(num, sizeof(struct scatterlist), GFP_ATOMIC);
|
|
if (!priv->sg_tx_p) {
|
|
dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
|
|
sg = priv->sg_tx_p;
|
|
|
|
for (i = 0; i < num; i++, sg++) {
|
|
if (i == (num - 1))
|
|
sg_set_page(sg, virt_to_page(xmit->buf),
|
|
rem, fifo_size * i);
|
|
else
|
|
sg_set_page(sg, virt_to_page(xmit->buf),
|
|
size, fifo_size * i);
|
|
}
|
|
|
|
sg = priv->sg_tx_p;
|
|
nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
|
|
if (!nent) {
|
|
dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
|
|
return 0;
|
|
}
|
|
priv->orig_nent = num;
|
|
priv->nent = nent;
|
|
|
|
for (i = 0; i < nent; i++, sg++) {
|
|
sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
|
|
fifo_size * i;
|
|
sg_dma_address(sg) = (sg_dma_address(sg) &
|
|
~(UART_XMIT_SIZE - 1)) + sg->offset;
|
|
if (i == (nent - 1))
|
|
sg_dma_len(sg) = rem;
|
|
else
|
|
sg_dma_len(sg) = size;
|
|
}
|
|
|
|
desc = dmaengine_prep_slave_sg(priv->chan_tx,
|
|
priv->sg_tx_p, nent, DMA_MEM_TO_DEV,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!desc) {
|
|
dev_err(priv->port.dev, "%s:dmaengine_prep_slave_sg Failed\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
|
|
priv->desc_tx = desc;
|
|
desc->callback = pch_dma_tx_complete;
|
|
desc->callback_param = priv;
|
|
|
|
desc->tx_submit(desc);
|
|
|
|
dma_async_issue_pending(priv->chan_tx);
|
|
|
|
return PCH_UART_HANDLED_TX_INT;
|
|
}
|
|
|
|
static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
|
|
{
|
|
struct uart_port *port = &priv->port;
|
|
struct tty_struct *tty = tty_port_tty_get(&port->state->port);
|
|
char *error_msg[5] = {};
|
|
int i = 0;
|
|
|
|
if (lsr & PCH_UART_LSR_ERR)
|
|
error_msg[i++] = "Error data in FIFO\n";
|
|
|
|
if (lsr & UART_LSR_FE) {
|
|
port->icount.frame++;
|
|
error_msg[i++] = " Framing Error\n";
|
|
}
|
|
|
|
if (lsr & UART_LSR_PE) {
|
|
port->icount.parity++;
|
|
error_msg[i++] = " Parity Error\n";
|
|
}
|
|
|
|
if (lsr & UART_LSR_OE) {
|
|
port->icount.overrun++;
|
|
error_msg[i++] = " Overrun Error\n";
|
|
}
|
|
|
|
if (tty == NULL) {
|
|
for (i = 0; error_msg[i] != NULL; i++)
|
|
dev_err(&priv->pdev->dev, error_msg[i]);
|
|
} else {
|
|
tty_kref_put(tty);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct eg20t_port *priv = dev_id;
|
|
unsigned int handled;
|
|
u8 lsr;
|
|
int ret = 0;
|
|
unsigned char iid;
|
|
unsigned long flags;
|
|
int next = 1;
|
|
u8 msr;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
handled = 0;
|
|
while (next) {
|
|
iid = pch_uart_hal_get_iid(priv);
|
|
if (iid & PCH_UART_IIR_IP) /* No Interrupt */
|
|
break;
|
|
switch (iid) {
|
|
case PCH_UART_IID_RLS: /* Receiver Line Status */
|
|
lsr = pch_uart_hal_get_line_status(priv);
|
|
if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE |
|
|
UART_LSR_PE | UART_LSR_OE)) {
|
|
pch_uart_err_ir(priv, lsr);
|
|
ret = PCH_UART_HANDLED_RX_ERR_INT;
|
|
} else {
|
|
ret = PCH_UART_HANDLED_LS_INT;
|
|
}
|
|
break;
|
|
case PCH_UART_IID_RDR: /* Received Data Ready */
|
|
if (priv->use_dma) {
|
|
pch_uart_hal_disable_interrupt(priv,
|
|
PCH_UART_HAL_RX_INT |
|
|
PCH_UART_HAL_RX_ERR_INT);
|
|
ret = dma_handle_rx(priv);
|
|
if (!ret)
|
|
pch_uart_hal_enable_interrupt(priv,
|
|
PCH_UART_HAL_RX_INT |
|
|
PCH_UART_HAL_RX_ERR_INT);
|
|
} else {
|
|
ret = handle_rx(priv);
|
|
}
|
|
break;
|
|
case PCH_UART_IID_RDR_TO: /* Received Data Ready
|
|
(FIFO Timeout) */
|
|
ret = handle_rx_to(priv);
|
|
break;
|
|
case PCH_UART_IID_THRE: /* Transmitter Holding Register
|
|
Empty */
|
|
if (priv->use_dma)
|
|
ret = dma_handle_tx(priv);
|
|
else
|
|
ret = handle_tx(priv);
|
|
break;
|
|
case PCH_UART_IID_MS: /* Modem Status */
|
|
msr = pch_uart_hal_get_modem(priv);
|
|
next = 0; /* MS ir prioirty is the lowest. So, MS ir
|
|
means final interrupt */
|
|
if ((msr & UART_MSR_ANY_DELTA) == 0)
|
|
break;
|
|
ret |= PCH_UART_HANDLED_MS_INT;
|
|
break;
|
|
default: /* Never junp to this label */
|
|
dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__,
|
|
iid, jiffies);
|
|
ret = -1;
|
|
next = 0;
|
|
break;
|
|
}
|
|
handled |= (unsigned int)ret;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/* This function tests whether the transmitter fifo and shifter for the port
|
|
described by 'port' is empty. */
|
|
static unsigned int pch_uart_tx_empty(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
if (priv->tx_empty)
|
|
return TIOCSER_TEMT;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
/* Returns the current state of modem control inputs. */
|
|
static unsigned int pch_uart_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
u8 modem;
|
|
unsigned int ret = 0;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
modem = pch_uart_hal_get_modem(priv);
|
|
|
|
if (modem & UART_MSR_DCD)
|
|
ret |= TIOCM_CAR;
|
|
|
|
if (modem & UART_MSR_RI)
|
|
ret |= TIOCM_RNG;
|
|
|
|
if (modem & UART_MSR_DSR)
|
|
ret |= TIOCM_DSR;
|
|
|
|
if (modem & UART_MSR_CTS)
|
|
ret |= TIOCM_CTS;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
u32 mcr = 0;
|
|
struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
|
|
|
|
if (mctrl & TIOCM_DTR)
|
|
mcr |= UART_MCR_DTR;
|
|
if (mctrl & TIOCM_RTS)
|
|
mcr |= UART_MCR_RTS;
|
|
if (mctrl & TIOCM_LOOP)
|
|
mcr |= UART_MCR_LOOP;
|
|
|
|
if (priv->mcr & UART_MCR_AFE)
|
|
mcr |= UART_MCR_AFE;
|
|
|
|
if (mctrl)
|
|
iowrite8(mcr, priv->membase + UART_MCR);
|
|
}
|
|
|
|
static void pch_uart_stop_tx(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
priv->start_tx = 0;
|
|
priv->tx_dma_use = 0;
|
|
}
|
|
|
|
static void pch_uart_start_tx(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
|
|
if (priv->use_dma) {
|
|
if (priv->tx_dma_use) {
|
|
dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
}
|
|
|
|
priv->start_tx = 1;
|
|
pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
|
|
}
|
|
|
|
static void pch_uart_stop_rx(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
priv->start_rx = 0;
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
|
|
PCH_UART_HAL_RX_ERR_INT);
|
|
}
|
|
|
|
/* Enable the modem status interrupts. */
|
|
static void pch_uart_enable_ms(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT);
|
|
}
|
|
|
|
/* Control the transmission of a break signal. */
|
|
static void pch_uart_break_ctl(struct uart_port *port, int ctl)
|
|
{
|
|
struct eg20t_port *priv;
|
|
unsigned long flags;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
pch_uart_hal_set_break(priv, ctl);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
/* Grab any interrupt resources and initialise any low level driver state. */
|
|
static int pch_uart_startup(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
int ret;
|
|
int fifo_size;
|
|
int trigger_level;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
priv->tx_empty = 1;
|
|
|
|
if (port->uartclk)
|
|
priv->uartclk = port->uartclk;
|
|
else
|
|
port->uartclk = priv->uartclk;
|
|
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
|
|
ret = pch_uart_hal_set_line(priv, default_baud,
|
|
PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
|
|
PCH_UART_HAL_STB1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (priv->fifo_size) {
|
|
case 256:
|
|
fifo_size = PCH_UART_HAL_FIFO256;
|
|
break;
|
|
case 64:
|
|
fifo_size = PCH_UART_HAL_FIFO64;
|
|
break;
|
|
case 16:
|
|
fifo_size = PCH_UART_HAL_FIFO16;
|
|
break;
|
|
case 1:
|
|
default:
|
|
fifo_size = PCH_UART_HAL_FIFO_DIS;
|
|
break;
|
|
}
|
|
|
|
switch (priv->trigger) {
|
|
case PCH_UART_HAL_TRIGGER1:
|
|
trigger_level = 1;
|
|
break;
|
|
case PCH_UART_HAL_TRIGGER_L:
|
|
trigger_level = priv->fifo_size / 4;
|
|
break;
|
|
case PCH_UART_HAL_TRIGGER_M:
|
|
trigger_level = priv->fifo_size / 2;
|
|
break;
|
|
case PCH_UART_HAL_TRIGGER_H:
|
|
default:
|
|
trigger_level = priv->fifo_size - (priv->fifo_size / 8);
|
|
break;
|
|
}
|
|
|
|
priv->trigger_level = trigger_level;
|
|
ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
|
|
fifo_size, priv->trigger);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
|
|
priv->irq_name, priv);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (priv->use_dma)
|
|
pch_request_dma(port);
|
|
|
|
priv->start_rx = 1;
|
|
pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
|
|
PCH_UART_HAL_RX_ERR_INT);
|
|
uart_update_timeout(port, CS8, default_baud);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pch_uart_shutdown(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
int ret;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
|
|
pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO);
|
|
ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
|
|
PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
|
|
if (ret)
|
|
dev_err(priv->port.dev,
|
|
"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
|
|
|
|
pch_free_dma(port);
|
|
|
|
free_irq(priv->port.irq, priv);
|
|
}
|
|
|
|
/* Change the port parameters, including word length, parity, stop
|
|
*bits. Update read_status_mask and ignore_status_mask to indicate
|
|
*the types of events we are interested in receiving. */
|
|
static void pch_uart_set_termios(struct uart_port *port,
|
|
struct ktermios *termios, struct ktermios *old)
|
|
{
|
|
int rtn;
|
|
unsigned int baud, parity, bits, stb;
|
|
struct eg20t_port *priv;
|
|
unsigned long flags;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
switch (termios->c_cflag & CSIZE) {
|
|
case CS5:
|
|
bits = PCH_UART_HAL_5BIT;
|
|
break;
|
|
case CS6:
|
|
bits = PCH_UART_HAL_6BIT;
|
|
break;
|
|
case CS7:
|
|
bits = PCH_UART_HAL_7BIT;
|
|
break;
|
|
default: /* CS8 */
|
|
bits = PCH_UART_HAL_8BIT;
|
|
break;
|
|
}
|
|
if (termios->c_cflag & CSTOPB)
|
|
stb = PCH_UART_HAL_STB2;
|
|
else
|
|
stb = PCH_UART_HAL_STB1;
|
|
|
|
if (termios->c_cflag & PARENB) {
|
|
if (termios->c_cflag & PARODD)
|
|
parity = PCH_UART_HAL_PARITY_ODD;
|
|
else
|
|
parity = PCH_UART_HAL_PARITY_EVEN;
|
|
|
|
} else
|
|
parity = PCH_UART_HAL_PARITY_NONE;
|
|
|
|
/* Only UART0 has auto hardware flow function */
|
|
if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
|
|
priv->mcr |= UART_MCR_AFE;
|
|
else
|
|
priv->mcr &= ~UART_MCR_AFE;
|
|
|
|
termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
|
|
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
spin_lock(&port->lock);
|
|
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
|
|
if (rtn)
|
|
goto out;
|
|
|
|
pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
|
|
/* Don't rewrite B0 */
|
|
if (tty_termios_baud_rate(termios))
|
|
tty_termios_encode_baud_rate(termios, baud, baud);
|
|
|
|
out:
|
|
spin_unlock(&port->lock);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
static const char *pch_uart_type(struct uart_port *port)
|
|
{
|
|
return KBUILD_MODNAME;
|
|
}
|
|
|
|
static void pch_uart_release_port(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
pci_iounmap(priv->pdev, priv->membase);
|
|
pci_release_regions(priv->pdev);
|
|
}
|
|
|
|
static int pch_uart_request_port(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv;
|
|
int ret;
|
|
void __iomem *membase;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
ret = pci_request_regions(priv->pdev, KBUILD_MODNAME);
|
|
if (ret < 0)
|
|
return -EBUSY;
|
|
|
|
membase = pci_iomap(priv->pdev, 1, 0);
|
|
if (!membase) {
|
|
pci_release_regions(priv->pdev);
|
|
return -EBUSY;
|
|
}
|
|
priv->membase = port->membase = membase;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pch_uart_config_port(struct uart_port *port, int type)
|
|
{
|
|
struct eg20t_port *priv;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
if (type & UART_CONFIG_TYPE) {
|
|
port->type = priv->port_type;
|
|
pch_uart_request_port(port);
|
|
}
|
|
}
|
|
|
|
static int pch_uart_verify_port(struct uart_port *port,
|
|
struct serial_struct *serinfo)
|
|
{
|
|
struct eg20t_port *priv;
|
|
|
|
priv = container_of(port, struct eg20t_port, port);
|
|
if (serinfo->flags & UPF_LOW_LATENCY) {
|
|
dev_info(priv->port.dev,
|
|
"PCH UART : Use PIO Mode (without DMA)\n");
|
|
priv->use_dma = 0;
|
|
serinfo->flags &= ~UPF_LOW_LATENCY;
|
|
} else {
|
|
#ifndef CONFIG_PCH_DMA
|
|
dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
|
|
__func__);
|
|
return -EOPNOTSUPP;
|
|
#endif
|
|
if (!priv->use_dma) {
|
|
pch_request_dma(port);
|
|
if (priv->chan_rx)
|
|
priv->use_dma = 1;
|
|
}
|
|
dev_info(priv->port.dev, "PCH UART: %s\n",
|
|
priv->use_dma ?
|
|
"Use DMA Mode" : "No DMA");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_PCH_UART_CONSOLE)
|
|
/*
|
|
* Wait for transmitter & holding register to empty
|
|
*/
|
|
static void wait_for_xmitr(struct eg20t_port *up, int bits)
|
|
{
|
|
unsigned int status, tmout = 10000;
|
|
|
|
/* Wait up to 10ms for the character(s) to be sent. */
|
|
for (;;) {
|
|
status = ioread8(up->membase + UART_LSR);
|
|
|
|
if ((status & bits) == bits)
|
|
break;
|
|
if (--tmout == 0)
|
|
break;
|
|
udelay(1);
|
|
}
|
|
|
|
/* Wait up to 1s for flow control if necessary */
|
|
if (up->port.flags & UPF_CONS_FLOW) {
|
|
unsigned int tmout;
|
|
for (tmout = 1000000; tmout; tmout--) {
|
|
unsigned int msr = ioread8(up->membase + UART_MSR);
|
|
if (msr & UART_MSR_CTS)
|
|
break;
|
|
udelay(1);
|
|
touch_nmi_watchdog();
|
|
}
|
|
}
|
|
}
|
|
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_PCH_UART_CONSOLE */
|
|
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
/*
|
|
* Console polling routines for communicate via uart while
|
|
* in an interrupt or debug context.
|
|
*/
|
|
static int pch_uart_get_poll_char(struct uart_port *port)
|
|
{
|
|
struct eg20t_port *priv =
|
|
container_of(port, struct eg20t_port, port);
|
|
u8 lsr = ioread8(priv->membase + UART_LSR);
|
|
|
|
if (!(lsr & UART_LSR_DR))
|
|
return NO_POLL_CHAR;
|
|
|
|
return ioread8(priv->membase + PCH_UART_RBR);
|
|
}
|
|
|
|
|
|
static void pch_uart_put_poll_char(struct uart_port *port,
|
|
unsigned char c)
|
|
{
|
|
unsigned int ier;
|
|
struct eg20t_port *priv =
|
|
container_of(port, struct eg20t_port, port);
|
|
|
|
/*
|
|
* First save the IER then disable the interrupts
|
|
*/
|
|
ier = ioread8(priv->membase + UART_IER);
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
|
|
|
|
wait_for_xmitr(priv, UART_LSR_THRE);
|
|
/*
|
|
* Send the character out.
|
|
*/
|
|
iowrite8(c, priv->membase + PCH_UART_THR);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore the IER
|
|
*/
|
|
wait_for_xmitr(priv, BOTH_EMPTY);
|
|
iowrite8(ier, priv->membase + UART_IER);
|
|
}
|
|
#endif /* CONFIG_CONSOLE_POLL */
|
|
|
|
static const struct uart_ops pch_uart_ops = {
|
|
.tx_empty = pch_uart_tx_empty,
|
|
.set_mctrl = pch_uart_set_mctrl,
|
|
.get_mctrl = pch_uart_get_mctrl,
|
|
.stop_tx = pch_uart_stop_tx,
|
|
.start_tx = pch_uart_start_tx,
|
|
.stop_rx = pch_uart_stop_rx,
|
|
.enable_ms = pch_uart_enable_ms,
|
|
.break_ctl = pch_uart_break_ctl,
|
|
.startup = pch_uart_startup,
|
|
.shutdown = pch_uart_shutdown,
|
|
.set_termios = pch_uart_set_termios,
|
|
/* .pm = pch_uart_pm, Not supported yet */
|
|
.type = pch_uart_type,
|
|
.release_port = pch_uart_release_port,
|
|
.request_port = pch_uart_request_port,
|
|
.config_port = pch_uart_config_port,
|
|
.verify_port = pch_uart_verify_port,
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
.poll_get_char = pch_uart_get_poll_char,
|
|
.poll_put_char = pch_uart_put_poll_char,
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
|
|
|
|
static void pch_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct eg20t_port *priv =
|
|
container_of(port, struct eg20t_port, port);
|
|
|
|
wait_for_xmitr(priv, UART_LSR_THRE);
|
|
iowrite8(ch, priv->membase + PCH_UART_THR);
|
|
}
|
|
|
|
/*
|
|
* Print a string to the serial port trying not to disturb
|
|
* any possible real use of the port...
|
|
*
|
|
* The console_lock must be held when we get here.
|
|
*/
|
|
static void
|
|
pch_console_write(struct console *co, const char *s, unsigned int count)
|
|
{
|
|
struct eg20t_port *priv;
|
|
unsigned long flags;
|
|
int priv_locked = 1;
|
|
int port_locked = 1;
|
|
u8 ier;
|
|
|
|
priv = pch_uart_ports[co->index];
|
|
|
|
touch_nmi_watchdog();
|
|
|
|
local_irq_save(flags);
|
|
if (priv->port.sysrq) {
|
|
/* call to uart_handle_sysrq_char already took the priv lock */
|
|
priv_locked = 0;
|
|
/* serial8250_handle_port() already took the port lock */
|
|
port_locked = 0;
|
|
} else if (oops_in_progress) {
|
|
priv_locked = spin_trylock(&priv->lock);
|
|
port_locked = spin_trylock(&priv->port.lock);
|
|
} else {
|
|
spin_lock(&priv->lock);
|
|
spin_lock(&priv->port.lock);
|
|
}
|
|
|
|
/*
|
|
* First save the IER then disable the interrupts
|
|
*/
|
|
ier = ioread8(priv->membase + UART_IER);
|
|
|
|
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
|
|
|
|
uart_console_write(&priv->port, s, count, pch_console_putchar);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore the IER
|
|
*/
|
|
wait_for_xmitr(priv, BOTH_EMPTY);
|
|
iowrite8(ier, priv->membase + UART_IER);
|
|
|
|
if (port_locked)
|
|
spin_unlock(&priv->port.lock);
|
|
if (priv_locked)
|
|
spin_unlock(&priv->lock);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static int __init pch_console_setup(struct console *co, char *options)
|
|
{
|
|
struct uart_port *port;
|
|
int baud = default_baud;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
/*
|
|
* Check whether an invalid uart number has been specified, and
|
|
* if so, search for the first available port that does have
|
|
* console support.
|
|
*/
|
|
if (co->index >= PCH_UART_NR)
|
|
co->index = 0;
|
|
port = &pch_uart_ports[co->index]->port;
|
|
|
|
if (!port || (!port->iobase && !port->membase))
|
|
return -ENODEV;
|
|
|
|
port->uartclk = pch_uart_get_uartclk();
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
return uart_set_options(port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct uart_driver pch_uart_driver;
|
|
|
|
static struct console pch_console = {
|
|
.name = PCH_UART_DRIVER_DEVICE,
|
|
.write = pch_console_write,
|
|
.device = uart_console_device,
|
|
.setup = pch_console_setup,
|
|
.flags = CON_PRINTBUFFER | CON_ANYTIME,
|
|
.index = -1,
|
|
.data = &pch_uart_driver,
|
|
};
|
|
|
|
#define PCH_CONSOLE (&pch_console)
|
|
#else
|
|
#define PCH_CONSOLE NULL
|
|
#endif /* CONFIG_SERIAL_PCH_UART_CONSOLE */
|
|
|
|
static struct uart_driver pch_uart_driver = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = KBUILD_MODNAME,
|
|
.dev_name = PCH_UART_DRIVER_DEVICE,
|
|
.major = 0,
|
|
.minor = 0,
|
|
.nr = PCH_UART_NR,
|
|
.cons = PCH_CONSOLE,
|
|
};
|
|
|
|
static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
struct eg20t_port *priv;
|
|
int ret;
|
|
unsigned int iobase;
|
|
unsigned int mapbase;
|
|
unsigned char *rxbuf;
|
|
int fifosize;
|
|
int port_type;
|
|
struct pch_uart_driver_data *board;
|
|
#ifdef CONFIG_DEBUG_FS
|
|
char name[32]; /* for debugfs file name */
|
|
#endif
|
|
|
|
board = &drv_dat[id->driver_data];
|
|
port_type = board->port_type;
|
|
|
|
priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
|
|
if (priv == NULL)
|
|
goto init_port_alloc_err;
|
|
|
|
rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
|
|
if (!rxbuf)
|
|
goto init_port_free_txbuf;
|
|
|
|
switch (port_type) {
|
|
case PORT_PCH_8LINE:
|
|
fifosize = 256; /* EG20T/ML7213: UART0 */
|
|
break;
|
|
case PORT_PCH_2LINE:
|
|
fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
|
|
goto init_port_hal_free;
|
|
}
|
|
|
|
pci_enable_msi(pdev);
|
|
pci_set_master(pdev);
|
|
|
|
spin_lock_init(&priv->lock);
|
|
|
|
iobase = pci_resource_start(pdev, 0);
|
|
mapbase = pci_resource_start(pdev, 1);
|
|
priv->mapbase = mapbase;
|
|
priv->iobase = iobase;
|
|
priv->pdev = pdev;
|
|
priv->tx_empty = 1;
|
|
priv->rxbuf.buf = rxbuf;
|
|
priv->rxbuf.size = PAGE_SIZE;
|
|
|
|
priv->fifo_size = fifosize;
|
|
priv->uartclk = pch_uart_get_uartclk();
|
|
priv->port_type = port_type;
|
|
priv->port.dev = &pdev->dev;
|
|
priv->port.iobase = iobase;
|
|
priv->port.membase = NULL;
|
|
priv->port.mapbase = mapbase;
|
|
priv->port.irq = pdev->irq;
|
|
priv->port.iotype = UPIO_PORT;
|
|
priv->port.ops = &pch_uart_ops;
|
|
priv->port.flags = UPF_BOOT_AUTOCONF;
|
|
priv->port.fifosize = fifosize;
|
|
priv->port.line = board->line_no;
|
|
priv->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PCH_UART_CONSOLE);
|
|
priv->trigger = PCH_UART_HAL_TRIGGER_M;
|
|
|
|
snprintf(priv->irq_name, IRQ_NAME_SIZE,
|
|
KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
|
|
priv->port.line);
|
|
|
|
spin_lock_init(&priv->port.lock);
|
|
|
|
pci_set_drvdata(pdev, priv);
|
|
priv->trigger_level = 1;
|
|
priv->fcr = 0;
|
|
|
|
if (pdev->dev.of_node)
|
|
of_property_read_u32(pdev->dev.of_node, "clock-frequency"
|
|
, &user_uartclk);
|
|
|
|
#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
|
|
pch_uart_ports[board->line_no] = priv;
|
|
#endif
|
|
ret = uart_add_one_port(&pch_uart_driver, &priv->port);
|
|
if (ret < 0)
|
|
goto init_port_hal_free;
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
snprintf(name, sizeof(name), "uart%d_regs", board->line_no);
|
|
priv->debugfs = debugfs_create_file(name, S_IFREG | S_IRUGO,
|
|
NULL, priv, &port_regs_ops);
|
|
#endif
|
|
|
|
return priv;
|
|
|
|
init_port_hal_free:
|
|
#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
|
|
pch_uart_ports[board->line_no] = NULL;
|
|
#endif
|
|
free_page((unsigned long)rxbuf);
|
|
init_port_free_txbuf:
|
|
kfree(priv);
|
|
init_port_alloc_err:
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void pch_uart_exit_port(struct eg20t_port *priv)
|
|
{
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
debugfs_remove(priv->debugfs);
|
|
#endif
|
|
uart_remove_one_port(&pch_uart_driver, &priv->port);
|
|
free_page((unsigned long)priv->rxbuf.buf);
|
|
}
|
|
|
|
static void pch_uart_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct eg20t_port *priv = pci_get_drvdata(pdev);
|
|
|
|
pci_disable_msi(pdev);
|
|
|
|
#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
|
|
pch_uart_ports[priv->port.line] = NULL;
|
|
#endif
|
|
pch_uart_exit_port(priv);
|
|
pci_disable_device(pdev);
|
|
kfree(priv);
|
|
return;
|
|
}
|
|
|
|
static int __maybe_unused pch_uart_pci_suspend(struct device *dev)
|
|
{
|
|
struct eg20t_port *priv = dev_get_drvdata(dev);
|
|
|
|
uart_suspend_port(&pch_uart_driver, &priv->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused pch_uart_pci_resume(struct device *dev)
|
|
{
|
|
struct eg20t_port *priv = dev_get_drvdata(dev);
|
|
|
|
uart_resume_port(&pch_uart_driver, &priv->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pci_device_id pch_uart_pci_id[] = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
|
|
.driver_data = pch_et20t_uart0},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
|
|
.driver_data = pch_et20t_uart1},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
|
|
.driver_data = pch_et20t_uart2},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
|
|
.driver_data = pch_et20t_uart3},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
|
|
.driver_data = pch_ml7213_uart0},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
|
|
.driver_data = pch_ml7213_uart1},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
|
|
.driver_data = pch_ml7213_uart2},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800C),
|
|
.driver_data = pch_ml7223_uart0},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
|
|
.driver_data = pch_ml7223_uart1},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
|
|
.driver_data = pch_ml7831_uart0},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
|
|
.driver_data = pch_ml7831_uart1},
|
|
{0,},
|
|
};
|
|
|
|
static int pch_uart_pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
int ret;
|
|
struct eg20t_port *priv;
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret < 0)
|
|
goto probe_error;
|
|
|
|
priv = pch_uart_init_port(pdev, id);
|
|
if (!priv) {
|
|
ret = -EBUSY;
|
|
goto probe_disable_device;
|
|
}
|
|
pci_set_drvdata(pdev, priv);
|
|
|
|
return ret;
|
|
|
|
probe_disable_device:
|
|
pci_disable_msi(pdev);
|
|
pci_disable_device(pdev);
|
|
probe_error:
|
|
return ret;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(pch_uart_pci_pm_ops,
|
|
pch_uart_pci_suspend,
|
|
pch_uart_pci_resume);
|
|
|
|
static struct pci_driver pch_uart_pci_driver = {
|
|
.name = "pch_uart",
|
|
.id_table = pch_uart_pci_id,
|
|
.probe = pch_uart_pci_probe,
|
|
.remove = pch_uart_pci_remove,
|
|
.driver.pm = &pch_uart_pci_pm_ops,
|
|
};
|
|
|
|
static int __init pch_uart_module_init(void)
|
|
{
|
|
int ret;
|
|
|
|
/* register as UART driver */
|
|
ret = uart_register_driver(&pch_uart_driver);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* register as PCI driver */
|
|
ret = pci_register_driver(&pch_uart_pci_driver);
|
|
if (ret < 0)
|
|
uart_unregister_driver(&pch_uart_driver);
|
|
|
|
return ret;
|
|
}
|
|
module_init(pch_uart_module_init);
|
|
|
|
static void __exit pch_uart_module_exit(void)
|
|
{
|
|
pci_unregister_driver(&pch_uart_pci_driver);
|
|
uart_unregister_driver(&pch_uart_driver);
|
|
}
|
|
module_exit(pch_uart_module_exit);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
|
|
MODULE_DEVICE_TABLE(pci, pch_uart_pci_id);
|
|
|
|
module_param(default_baud, uint, S_IRUGO);
|
|
MODULE_PARM_DESC(default_baud,
|
|
"Default BAUD for initial driver state and console (default 9600)");
|
|
module_param(user_uartclk, uint, S_IRUGO);
|
|
MODULE_PARM_DESC(user_uartclk,
|
|
"Override UART default or board specific UART clock");
|