linux/drivers/usb/host/xhci-plat.c

477 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* xhci-plat.c - xHCI host controller driver platform Bus Glue.
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
* Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* A lot of code borrowed from the Linux xHCI driver.
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/usb/phy.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/usb/of.h>
#include "xhci.h"
#include "xhci-plat.h"
#include "xhci-mvebu.h"
#include "xhci-rcar.h"
static struct hc_driver __read_mostly xhci_plat_hc_driver;
static int xhci_plat_setup(struct usb_hcd *hcd);
static int xhci_plat_start(struct usb_hcd *hcd);
static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
.extra_priv_size = sizeof(struct xhci_plat_priv),
.reset = xhci_plat_setup,
.start = xhci_plat_start,
};
static void xhci_priv_plat_start(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (priv->plat_start)
priv->plat_start(hcd);
}
static int xhci_priv_init_quirk(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (!priv->init_quirk)
return 0;
return priv->init_quirk(hcd);
}
static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (!priv->resume_quirk)
return 0;
return priv->resume_quirk(hcd);
}
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
/*
* As of now platform drivers don't provide MSI support so we ensure
* here that the generic code does not try to make a pci_dev from our
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT;
}
/* called during probe() after chip reset completes */
static int xhci_plat_setup(struct usb_hcd *hcd)
{
int ret;
ret = xhci_priv_init_quirk(hcd);
if (ret)
return ret;
return xhci_gen_setup(hcd, xhci_plat_quirks);
}
static int xhci_plat_start(struct usb_hcd *hcd)
{
xhci_priv_plat_start(hcd);
return xhci_run(hcd);
}
#ifdef CONFIG_OF
static const struct xhci_plat_priv xhci_plat_marvell_armada = {
.init_quirk = xhci_mvebu_mbus_init_quirk,
};
static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
.init_quirk = xhci_mvebu_a3700_init_quirk,
};
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
.init_quirk = xhci_rcar_init_quirk,
.plat_start = xhci_rcar_start,
.resume_quirk = xhci_rcar_resume_quirk,
};
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3,
.init_quirk = xhci_rcar_init_quirk,
.plat_start = xhci_rcar_start,
.resume_quirk = xhci_rcar_resume_quirk,
};
static const struct of_device_id usb_xhci_of_match[] = {
{
.compatible = "generic-xhci",
}, {
.compatible = "xhci-platform",
}, {
.compatible = "marvell,armada-375-xhci",
.data = &xhci_plat_marvell_armada,
}, {
.compatible = "marvell,armada-380-xhci",
.data = &xhci_plat_marvell_armada,
}, {
.compatible = "marvell,armada3700-xhci",
.data = &xhci_plat_marvell_armada3700,
}, {
.compatible = "renesas,xhci-r8a7790",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,xhci-r8a7791",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,xhci-r8a7793",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,xhci-r8a7795",
.data = &xhci_plat_renesas_rcar_gen3,
}, {
.compatible = "renesas,xhci-r8a7796",
.data = &xhci_plat_renesas_rcar_gen3,
}, {
.compatible = "renesas,rcar-gen2-xhci",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,rcar-gen3-xhci",
.data = &xhci_plat_renesas_rcar_gen3,
},
{},
};
MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
#endif
static int xhci_plat_probe(struct platform_device *pdev)
{
const struct xhci_plat_priv *priv_match;
const struct hc_driver *driver;
struct device *sysdev, *tmpdev;
struct xhci_hcd *xhci;
struct resource *res;
struct usb_hcd *hcd;
int ret;
int irq;
if (usb_disabled())
return -ENODEV;
driver = &xhci_plat_hc_driver;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
/*
* sysdev must point to a device that is known to the system firmware
* or PCI hardware. We handle these three cases here:
* 1. xhci_plat comes from firmware
* 2. xhci_plat is child of a device from firmware (dwc3-plat)
* 3. xhci_plat is grandchild of a pci device (dwc3-pci)
*/
for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
if (is_of_node(sysdev->fwnode) ||
is_acpi_device_node(sysdev->fwnode))
break;
#ifdef CONFIG_PCI
else if (sysdev->bus == &pci_bus_type)
break;
#endif
}
if (!sysdev)
sysdev = &pdev->dev;
/* Try to set 64-bit DMA first */
if (WARN_ON(!sysdev->dma_mask))
/* Platform did not initialize dma_mask */
ret = dma_coerce_mask_and_coherent(sysdev,
DMA_BIT_MASK(64));
else
ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
/* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
if (ret) {
ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32));
if (ret)
return ret;
}
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
dev_name(&pdev->dev), NULL);
if (!hcd) {
ret = -ENOMEM;
goto disable_runtime;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hcd->regs)) {
ret = PTR_ERR(hcd->regs);
goto put_hcd;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
xhci = hcd_to_xhci(hcd);
/*
* Not all platforms have clks so it is not an error if the
* clock do not exist.
*/
xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg");
if (IS_ERR(xhci->reg_clk)) {
ret = PTR_ERR(xhci->reg_clk);
goto put_hcd;
}
ret = clk_prepare_enable(xhci->reg_clk);
if (ret)
goto put_hcd;
xhci->clk = devm_clk_get_optional(&pdev->dev, NULL);
if (IS_ERR(xhci->clk)) {
ret = PTR_ERR(xhci->clk);
goto disable_reg_clk;
}
ret = clk_prepare_enable(xhci->clk);
if (ret)
goto disable_reg_clk;
priv_match = of_device_get_match_data(&pdev->dev);
if (priv_match) {
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
/* Just copy data for now */
if (priv_match)
*priv = *priv_match;
}
device_wakeup_enable(hcd->self.controller);
xhci->main_hcd = hcd;
xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
dev_name(&pdev->dev), hcd);
if (!xhci->shared_hcd) {
ret = -ENOMEM;
goto disable_clk;
}
/* imod_interval is the interrupt moderation value in nanoseconds. */
xhci->imod_interval = 40000;
/* Iterate over all parent nodes for finding quirks */
for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
xhci->quirks |= XHCI_HW_LPM_DISABLE;
if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
xhci->quirks |= XHCI_LPM_SUPPORT;
if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
xhci->quirks |= XHCI_BROKEN_PORT_PED;
device_property_read_u32(tmpdev, "imod-interval-ns",
&xhci->imod_interval);
}
hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
if (IS_ERR(hcd->usb_phy)) {
ret = PTR_ERR(hcd->usb_phy);
if (ret == -EPROBE_DEFER)
goto put_usb3_hcd;
hcd->usb_phy = NULL;
} else {
ret = usb_phy_init(hcd->usb_phy);
if (ret)
goto put_usb3_hcd;
hcd->skip_phy_initialization = 1;
}
hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
xhci->shared_hcd->tpl_support = hcd->tpl_support;
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto disable_usb_phy;
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
goto dealloc_usb2_hcd;
device_enable_async_suspend(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
/*
* Prevent runtime pm from being on as default, users should enable
* runtime pm using power/control in sysfs.
*/
pm_runtime_forbid(&pdev->dev);
return 0;
dealloc_usb2_hcd:
usb_remove_hcd(hcd);
disable_usb_phy:
usb_phy_shutdown(hcd->usb_phy);
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);
disable_clk:
clk_disable_unprepare(xhci->clk);
disable_reg_clk:
clk_disable_unprepare(xhci->reg_clk);
put_hcd:
usb_put_hcd(hcd);
disable_runtime:
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
static int xhci_plat_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct clk *clk = xhci->clk;
struct clk *reg_clk = xhci->reg_clk;
struct usb_hcd *shared_hcd = xhci->shared_hcd;
xhci->xhc_state |= XHCI_STATE_REMOVING;
usb_remove_hcd(shared_hcd);
xhci->shared_hcd = NULL;
usb_phy_shutdown(hcd->usb_phy);
usb_remove_hcd(hcd);
usb_put_hcd(shared_hcd);
clk_disable_unprepare(clk);
clk_disable_unprepare(reg_clk);
usb_put_hcd(hcd);
pm_runtime_set_suspended(&dev->dev);
pm_runtime_disable(&dev->dev);
return 0;
}
static int __maybe_unused xhci_plat_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
/*
* xhci_suspend() needs `do_wakeup` to know whether host is allowed
* to do wakeup during suspend. Since xhci_plat_suspend is currently
* only designed for system suspend, device_may_wakeup() is enough
* to dertermine whether host is allowed to do wakeup. Need to
* reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
* also applies to runtime suspend.
*/
return xhci_suspend(xhci, device_may_wakeup(dev));
}
static int __maybe_unused xhci_plat_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ret;
ret = xhci_priv_resume_quirk(hcd);
if (ret)
return ret;
return xhci_resume(xhci, 0);
}
static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
return xhci_suspend(xhci, true);
}
static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
return xhci_resume(xhci, 0);
}
static const struct dev_pm_ops xhci_plat_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
xhci_plat_runtime_resume,
NULL)
};
static const struct acpi_device_id usb_xhci_acpi_match[] = {
/* XHCI-compliant USB Controller */
{ "PNP0D10", },
{ }
};
MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
static struct platform_driver usb_xhci_driver = {
.probe = xhci_plat_probe,
.remove = xhci_plat_remove,
.driver = {
.name = "xhci-hcd",
.pm = &xhci_plat_pm_ops,
.of_match_table = of_match_ptr(usb_xhci_of_match),
.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
},
};
MODULE_ALIAS("platform:xhci-hcd");
static int __init xhci_plat_init(void)
{
xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
return platform_driver_register(&usb_xhci_driver);
}
module_init(xhci_plat_init);
static void __exit xhci_plat_exit(void)
{
platform_driver_unregister(&usb_xhci_driver);
}
module_exit(xhci_plat_exit);
MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
MODULE_LICENSE("GPL");