mirror of https://gitee.com/openkylin/linux.git
479 lines
12 KiB
C
479 lines
12 KiB
C
/*
|
|
* Copyright (c) 2006-2009 Simtec Electronics
|
|
* http://armlinux.simtec.co.uk/
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <mach/map.h>
|
|
#include <mach/regs-clock.h>
|
|
|
|
#include <plat/cpu-freq-core.h>
|
|
|
|
#include "regs-mem.h"
|
|
|
|
#define print_ns(x) ((x) / 10), ((x) % 10)
|
|
|
|
/**
|
|
* s3c2410_print_timing - print bank timing data for debug purposes
|
|
* @pfx: The prefix to put on the output
|
|
* @timings: The timing inforamtion to print.
|
|
*/
|
|
static void s3c2410_print_timing(const char *pfx,
|
|
struct s3c_iotimings *timings)
|
|
{
|
|
struct s3c2410_iobank_timing *bt;
|
|
int bank;
|
|
|
|
for (bank = 0; bank < MAX_BANKS; bank++) {
|
|
bt = timings->bank[bank].io_2410;
|
|
if (!bt)
|
|
continue;
|
|
|
|
printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
|
|
"Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
|
|
print_ns(bt->tacs),
|
|
print_ns(bt->tcos),
|
|
print_ns(bt->tacc),
|
|
print_ns(bt->tcoh),
|
|
print_ns(bt->tcah));
|
|
}
|
|
}
|
|
|
|
/**
|
|
* bank_reg - convert bank number to pointer to the control register.
|
|
* @bank: The IO bank number.
|
|
*/
|
|
static inline void __iomem *bank_reg(unsigned int bank)
|
|
{
|
|
return S3C2410_BANKCON0 + (bank << 2);
|
|
}
|
|
|
|
/**
|
|
* bank_is_io - test whether bank is used for IO
|
|
* @bankcon: The bank control register.
|
|
*
|
|
* This is a simplistic test to see if any BANKCON[x] is not an IO
|
|
* bank. It currently does not take into account whether BWSCON has
|
|
* an illegal width-setting in it, or if the pin connected to nCS[x]
|
|
* is actually being handled as a chip-select.
|
|
*/
|
|
static inline int bank_is_io(unsigned long bankcon)
|
|
{
|
|
return !(bankcon & S3C2410_BANKCON_SDRAM);
|
|
}
|
|
|
|
/**
|
|
* to_div - convert cycle time to divisor
|
|
* @cyc: The cycle time, in 10ths of nanoseconds.
|
|
* @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
|
|
*
|
|
* Convert the given cycle time into the divisor to use to obtain it from
|
|
* HCLK.
|
|
*/
|
|
static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
|
|
{
|
|
if (cyc == 0)
|
|
return 0;
|
|
|
|
return DIV_ROUND_UP(cyc, hclk_tns);
|
|
}
|
|
|
|
/**
|
|
* calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
|
|
* @cyc: The cycle time, in 10ths of nanoseconds.
|
|
* @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
|
|
* @v: Pointer to register to alter.
|
|
* @shift: The shift to get to the control bits.
|
|
*
|
|
* Calculate the divisor, and turn it into the correct control bits to
|
|
* set in the result, @v.
|
|
*/
|
|
static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
|
|
unsigned long *v, int shift)
|
|
{
|
|
unsigned int div = to_div(cyc, hclk_tns);
|
|
unsigned long val;
|
|
|
|
s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
|
|
__func__, cyc, hclk_tns, shift, div);
|
|
|
|
switch (div) {
|
|
case 0:
|
|
val = 0;
|
|
break;
|
|
case 1:
|
|
val = 1;
|
|
break;
|
|
case 2:
|
|
val = 2;
|
|
break;
|
|
case 3:
|
|
case 4:
|
|
val = 3;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
*v |= val << shift;
|
|
return 0;
|
|
}
|
|
|
|
int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
|
|
{
|
|
/* Currently no support for Tacp calculations. */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* calc_tacc - calculate divisor control for tacc.
|
|
* @cyc: The cycle time, in 10ths of nanoseconds.
|
|
* @nwait_en: IS nWAIT enabled for this bank.
|
|
* @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
|
|
* @v: Pointer to register to alter.
|
|
*
|
|
* Calculate the divisor control for tACC, taking into account whether
|
|
* the bank has nWAIT enabled. The result is used to modify the value
|
|
* pointed to by @v.
|
|
*/
|
|
static int calc_tacc(unsigned int cyc, int nwait_en,
|
|
unsigned long hclk_tns, unsigned long *v)
|
|
{
|
|
unsigned int div = to_div(cyc, hclk_tns);
|
|
unsigned long val;
|
|
|
|
s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
|
|
__func__, cyc, nwait_en, hclk_tns, div);
|
|
|
|
/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
|
|
if (nwait_en && div < 4)
|
|
div = 4;
|
|
|
|
switch (div) {
|
|
case 0:
|
|
val = 0;
|
|
break;
|
|
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
val = div - 1;
|
|
break;
|
|
|
|
case 5:
|
|
case 6:
|
|
val = 4;
|
|
break;
|
|
|
|
case 7:
|
|
case 8:
|
|
val = 5;
|
|
break;
|
|
|
|
case 9:
|
|
case 10:
|
|
val = 6;
|
|
break;
|
|
|
|
case 11:
|
|
case 12:
|
|
case 13:
|
|
case 14:
|
|
val = 7;
|
|
break;
|
|
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
*v |= val << 8;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* s3c2410_calc_bank - calculate bank timing infromation
|
|
* @cfg: The configuration we need to calculate for.
|
|
* @bt: The bank timing information.
|
|
*
|
|
* Given the cycle timine for a bank @bt, calculate the new BANKCON
|
|
* setting for the @cfg timing. This updates the timing information
|
|
* ready for the cpu frequency change.
|
|
*/
|
|
static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
|
|
struct s3c2410_iobank_timing *bt)
|
|
{
|
|
unsigned long hclk = cfg->freq.hclk_tns;
|
|
unsigned long res;
|
|
int ret;
|
|
|
|
res = bt->bankcon;
|
|
res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
|
|
|
|
/* tacp: 2,3,4,5 */
|
|
/* tcah: 0,1,2,4 */
|
|
/* tcoh: 0,1,2,4 */
|
|
/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
|
|
/* tcos: 0,1,2,4 */
|
|
/* tacs: 0,1,2,4 */
|
|
|
|
ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
|
|
ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
|
|
ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
|
|
ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
|
|
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
ret |= calc_tacp(bt->tacp, hclk, &res);
|
|
ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
|
|
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
bt->bankcon = res;
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int tacc_tab[] = {
|
|
[0] = 1,
|
|
[1] = 2,
|
|
[2] = 3,
|
|
[3] = 4,
|
|
[4] = 6,
|
|
[5] = 9,
|
|
[6] = 10,
|
|
[7] = 14,
|
|
};
|
|
|
|
/**
|
|
* get_tacc - turn tACC value into cycle time
|
|
* @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
|
|
* @val: The bank timing register value, shifed down.
|
|
*/
|
|
static unsigned int get_tacc(unsigned long hclk_tns,
|
|
unsigned long val)
|
|
{
|
|
val &= 7;
|
|
return hclk_tns * tacc_tab[val];
|
|
}
|
|
|
|
/**
|
|
* get_0124 - turn 0/1/2/4 divider into cycle time
|
|
* @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
|
|
* @val: The bank timing register value, shifed down.
|
|
*/
|
|
static unsigned int get_0124(unsigned long hclk_tns,
|
|
unsigned long val)
|
|
{
|
|
val &= 3;
|
|
return hclk_tns * ((val == 3) ? 4 : val);
|
|
}
|
|
|
|
/**
|
|
* s3c2410_iotiming_getbank - turn BANKCON into cycle time information
|
|
* @cfg: The frequency configuration
|
|
* @bt: The bank timing to fill in (uses cached BANKCON)
|
|
*
|
|
* Given the BANKCON setting in @bt and the current frequency settings
|
|
* in @cfg, update the cycle timing information.
|
|
*/
|
|
void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
|
|
struct s3c2410_iobank_timing *bt)
|
|
{
|
|
unsigned long bankcon = bt->bankcon;
|
|
unsigned long hclk = cfg->freq.hclk_tns;
|
|
|
|
bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
|
|
bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
|
|
bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
|
|
bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
|
|
bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
|
|
}
|
|
|
|
/**
|
|
* s3c2410_iotiming_debugfs - debugfs show io bank timing information
|
|
* @seq: The seq_file to write output to using seq_printf().
|
|
* @cfg: The current configuration.
|
|
* @iob: The IO bank information to decode.
|
|
*/
|
|
void s3c2410_iotiming_debugfs(struct seq_file *seq,
|
|
struct s3c_cpufreq_config *cfg,
|
|
union s3c_iobank *iob)
|
|
{
|
|
struct s3c2410_iobank_timing *bt = iob->io_2410;
|
|
unsigned long bankcon = bt->bankcon;
|
|
unsigned long hclk = cfg->freq.hclk_tns;
|
|
unsigned int tacs;
|
|
unsigned int tcos;
|
|
unsigned int tacc;
|
|
unsigned int tcoh;
|
|
unsigned int tcah;
|
|
|
|
seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
|
|
|
|
tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
|
|
tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
|
|
tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
|
|
tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
|
|
tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
|
|
|
|
seq_printf(seq,
|
|
"\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
|
|
print_ns(bt->tacs),
|
|
print_ns(bt->tcos),
|
|
print_ns(bt->tacc),
|
|
print_ns(bt->tcoh),
|
|
print_ns(bt->tcah));
|
|
|
|
seq_printf(seq,
|
|
"\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
|
|
print_ns(tacs),
|
|
print_ns(tcos),
|
|
print_ns(tacc),
|
|
print_ns(tcoh),
|
|
print_ns(tcah));
|
|
}
|
|
|
|
/**
|
|
* s3c2410_iotiming_calc - Calculate bank timing for frequency change.
|
|
* @cfg: The frequency configuration
|
|
* @iot: The IO timing information to fill out.
|
|
*
|
|
* Calculate the new values for the banks in @iot based on the new
|
|
* frequency information in @cfg. This is then used by s3c2410_iotiming_set()
|
|
* to update the timing when necessary.
|
|
*/
|
|
int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
|
|
struct s3c_iotimings *iot)
|
|
{
|
|
struct s3c2410_iobank_timing *bt;
|
|
unsigned long bankcon;
|
|
int bank;
|
|
int ret;
|
|
|
|
for (bank = 0; bank < MAX_BANKS; bank++) {
|
|
bankcon = __raw_readl(bank_reg(bank));
|
|
bt = iot->bank[bank].io_2410;
|
|
|
|
if (!bt)
|
|
continue;
|
|
|
|
bt->bankcon = bankcon;
|
|
|
|
ret = s3c2410_calc_bank(cfg, bt);
|
|
if (ret) {
|
|
printk(KERN_ERR "%s: cannot calculate bank %d io\n",
|
|
__func__, bank);
|
|
goto err;
|
|
}
|
|
|
|
s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
|
|
__func__, bank, bt->bankcon);
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* s3c2410_iotiming_set - set the IO timings from the given setup.
|
|
* @cfg: The frequency configuration
|
|
* @iot: The IO timing information to use.
|
|
*
|
|
* Set all the currently used IO bank timing information generated
|
|
* by s3c2410_iotiming_calc() once the core has validated that all
|
|
* the new values are within permitted bounds.
|
|
*/
|
|
void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
|
|
struct s3c_iotimings *iot)
|
|
{
|
|
struct s3c2410_iobank_timing *bt;
|
|
int bank;
|
|
|
|
/* set the io timings from the specifier */
|
|
|
|
for (bank = 0; bank < MAX_BANKS; bank++) {
|
|
bt = iot->bank[bank].io_2410;
|
|
if (!bt)
|
|
continue;
|
|
|
|
__raw_writel(bt->bankcon, bank_reg(bank));
|
|
}
|
|
}
|
|
|
|
/**
|
|
* s3c2410_iotiming_get - Get the timing information from current registers.
|
|
* @cfg: The frequency configuration
|
|
* @timings: The IO timing information to fill out.
|
|
*
|
|
* Calculate the @timings timing information from the current frequency
|
|
* information in @cfg, and the new frequency configur
|
|
* through all the IO banks, reading the state and then updating @iot
|
|
* as necessary.
|
|
*
|
|
* This is used at the moment on initialisation to get the current
|
|
* configuration so that boards do not have to carry their own setup
|
|
* if the timings are correct on initialisation.
|
|
*/
|
|
|
|
int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
|
|
struct s3c_iotimings *timings)
|
|
{
|
|
struct s3c2410_iobank_timing *bt;
|
|
unsigned long bankcon;
|
|
unsigned long bwscon;
|
|
int bank;
|
|
|
|
bwscon = __raw_readl(S3C2410_BWSCON);
|
|
|
|
/* look through all banks to see what is currently set. */
|
|
|
|
for (bank = 0; bank < MAX_BANKS; bank++) {
|
|
bankcon = __raw_readl(bank_reg(bank));
|
|
|
|
if (!bank_is_io(bankcon))
|
|
continue;
|
|
|
|
s3c_freq_iodbg("%s: bank %d: con %08lx\n",
|
|
__func__, bank, bankcon);
|
|
|
|
bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
|
|
if (!bt) {
|
|
printk(KERN_ERR "%s: no memory for bank\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* find out in nWait is enabled for bank. */
|
|
|
|
if (bank != 0) {
|
|
unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank);
|
|
if (tmp & S3C2410_BWSCON_WS)
|
|
bt->nwait_en = 1;
|
|
}
|
|
|
|
timings->bank[bank].io_2410 = bt;
|
|
bt->bankcon = bankcon;
|
|
|
|
s3c2410_iotiming_getbank(cfg, bt);
|
|
}
|
|
|
|
s3c2410_print_timing("get", timings);
|
|
return 0;
|
|
}
|