mirror of https://gitee.com/openkylin/linux.git
326 lines
8.0 KiB
C
326 lines
8.0 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2018 NXP
|
|
* Author: Dong Aisheng <aisheng.dong@nxp.com>
|
|
*
|
|
* Implementation of the SCU IPC functions using MUs (client side).
|
|
*
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/firmware/imx/types.h>
|
|
#include <linux/firmware/imx/ipc.h>
|
|
#include <linux/firmware/imx/sci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mailbox_client.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define SCU_MU_CHAN_NUM 8
|
|
#define MAX_RX_TIMEOUT (msecs_to_jiffies(30))
|
|
|
|
struct imx_sc_chan {
|
|
struct imx_sc_ipc *sc_ipc;
|
|
|
|
struct mbox_client cl;
|
|
struct mbox_chan *ch;
|
|
int idx;
|
|
struct completion tx_done;
|
|
};
|
|
|
|
struct imx_sc_ipc {
|
|
/* SCU uses 4 Tx and 4 Rx channels */
|
|
struct imx_sc_chan chans[SCU_MU_CHAN_NUM];
|
|
struct device *dev;
|
|
struct mutex lock;
|
|
struct completion done;
|
|
|
|
/* temporarily store the SCU msg */
|
|
u32 *msg;
|
|
u8 rx_size;
|
|
u8 count;
|
|
};
|
|
|
|
/*
|
|
* This type is used to indicate error response for most functions.
|
|
*/
|
|
enum imx_sc_error_codes {
|
|
IMX_SC_ERR_NONE = 0, /* Success */
|
|
IMX_SC_ERR_VERSION = 1, /* Incompatible API version */
|
|
IMX_SC_ERR_CONFIG = 2, /* Configuration error */
|
|
IMX_SC_ERR_PARM = 3, /* Bad parameter */
|
|
IMX_SC_ERR_NOACCESS = 4, /* Permission error (no access) */
|
|
IMX_SC_ERR_LOCKED = 5, /* Permission error (locked) */
|
|
IMX_SC_ERR_UNAVAILABLE = 6, /* Unavailable (out of resources) */
|
|
IMX_SC_ERR_NOTFOUND = 7, /* Not found */
|
|
IMX_SC_ERR_NOPOWER = 8, /* No power */
|
|
IMX_SC_ERR_IPC = 9, /* Generic IPC error */
|
|
IMX_SC_ERR_BUSY = 10, /* Resource is currently busy/active */
|
|
IMX_SC_ERR_FAIL = 11, /* General I/O failure */
|
|
IMX_SC_ERR_LAST
|
|
};
|
|
|
|
static int imx_sc_linux_errmap[IMX_SC_ERR_LAST] = {
|
|
0, /* IMX_SC_ERR_NONE */
|
|
-EINVAL, /* IMX_SC_ERR_VERSION */
|
|
-EINVAL, /* IMX_SC_ERR_CONFIG */
|
|
-EINVAL, /* IMX_SC_ERR_PARM */
|
|
-EACCES, /* IMX_SC_ERR_NOACCESS */
|
|
-EACCES, /* IMX_SC_ERR_LOCKED */
|
|
-ERANGE, /* IMX_SC_ERR_UNAVAILABLE */
|
|
-EEXIST, /* IMX_SC_ERR_NOTFOUND */
|
|
-EPERM, /* IMX_SC_ERR_NOPOWER */
|
|
-EPIPE, /* IMX_SC_ERR_IPC */
|
|
-EBUSY, /* IMX_SC_ERR_BUSY */
|
|
-EIO, /* IMX_SC_ERR_FAIL */
|
|
};
|
|
|
|
static struct imx_sc_ipc *imx_sc_ipc_handle;
|
|
|
|
static inline int imx_sc_to_linux_errno(int errno)
|
|
{
|
|
if (errno >= IMX_SC_ERR_NONE && errno < IMX_SC_ERR_LAST)
|
|
return imx_sc_linux_errmap[errno];
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Get the default handle used by SCU
|
|
*/
|
|
int imx_scu_get_handle(struct imx_sc_ipc **ipc)
|
|
{
|
|
if (!imx_sc_ipc_handle)
|
|
return -EPROBE_DEFER;
|
|
|
|
*ipc = imx_sc_ipc_handle;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(imx_scu_get_handle);
|
|
|
|
/* Callback called when the word of a message is ack-ed, eg read by SCU */
|
|
static void imx_scu_tx_done(struct mbox_client *cl, void *mssg, int r)
|
|
{
|
|
struct imx_sc_chan *sc_chan = container_of(cl, struct imx_sc_chan, cl);
|
|
|
|
complete(&sc_chan->tx_done);
|
|
}
|
|
|
|
static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
|
|
{
|
|
struct imx_sc_chan *sc_chan = container_of(c, struct imx_sc_chan, cl);
|
|
struct imx_sc_ipc *sc_ipc = sc_chan->sc_ipc;
|
|
struct imx_sc_rpc_msg *hdr;
|
|
u32 *data = msg;
|
|
|
|
if (!sc_ipc->msg) {
|
|
dev_warn(sc_ipc->dev, "unexpected rx idx %d 0x%08x, ignore!\n",
|
|
sc_chan->idx, *data);
|
|
return;
|
|
}
|
|
|
|
if (sc_chan->idx == 0) {
|
|
hdr = msg;
|
|
sc_ipc->rx_size = hdr->size;
|
|
dev_dbg(sc_ipc->dev, "msg rx size %u\n", sc_ipc->rx_size);
|
|
if (sc_ipc->rx_size > 4)
|
|
dev_warn(sc_ipc->dev, "RPC does not support receiving over 4 words: %u\n",
|
|
sc_ipc->rx_size);
|
|
}
|
|
|
|
sc_ipc->msg[sc_chan->idx] = *data;
|
|
sc_ipc->count++;
|
|
|
|
dev_dbg(sc_ipc->dev, "mu %u msg %u 0x%x\n", sc_chan->idx,
|
|
sc_ipc->count, *data);
|
|
|
|
if ((sc_ipc->rx_size != 0) && (sc_ipc->count == sc_ipc->rx_size))
|
|
complete(&sc_ipc->done);
|
|
}
|
|
|
|
static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
|
|
{
|
|
struct imx_sc_rpc_msg *hdr = msg;
|
|
struct imx_sc_chan *sc_chan;
|
|
u32 *data = msg;
|
|
int ret;
|
|
int i;
|
|
|
|
/* Check size */
|
|
if (hdr->size > IMX_SC_RPC_MAX_MSG)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr->svc,
|
|
hdr->func, hdr->size);
|
|
|
|
for (i = 0; i < hdr->size; i++) {
|
|
sc_chan = &sc_ipc->chans[i % 4];
|
|
|
|
/*
|
|
* SCU requires that all messages words are written
|
|
* sequentially but linux MU driver implements multiple
|
|
* independent channels for each register so ordering between
|
|
* different channels must be ensured by SCU API interface.
|
|
*
|
|
* Wait for tx_done before every send to ensure that no
|
|
* queueing happens at the mailbox channel level.
|
|
*/
|
|
wait_for_completion(&sc_chan->tx_done);
|
|
reinit_completion(&sc_chan->tx_done);
|
|
|
|
ret = mbox_send_message(sc_chan->ch, &data[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* RPC command/response
|
|
*/
|
|
int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp)
|
|
{
|
|
uint8_t saved_svc, saved_func;
|
|
struct imx_sc_rpc_msg *hdr;
|
|
int ret;
|
|
|
|
if (WARN_ON(!sc_ipc || !msg))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&sc_ipc->lock);
|
|
reinit_completion(&sc_ipc->done);
|
|
|
|
if (have_resp) {
|
|
sc_ipc->msg = msg;
|
|
saved_svc = ((struct imx_sc_rpc_msg *)msg)->svc;
|
|
saved_func = ((struct imx_sc_rpc_msg *)msg)->func;
|
|
}
|
|
sc_ipc->count = 0;
|
|
ret = imx_scu_ipc_write(sc_ipc, msg);
|
|
if (ret < 0) {
|
|
dev_err(sc_ipc->dev, "RPC send msg failed: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
if (have_resp) {
|
|
if (!wait_for_completion_timeout(&sc_ipc->done,
|
|
MAX_RX_TIMEOUT)) {
|
|
dev_err(sc_ipc->dev, "RPC send msg timeout\n");
|
|
mutex_unlock(&sc_ipc->lock);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* response status is stored in hdr->func field */
|
|
hdr = msg;
|
|
ret = hdr->func;
|
|
/*
|
|
* Some special SCU firmware APIs do NOT have return value
|
|
* in hdr->func, but they do have response data, those special
|
|
* APIs are defined as void function in SCU firmware, so they
|
|
* should be treated as return success always.
|
|
*/
|
|
if ((saved_svc == IMX_SC_RPC_SVC_MISC) &&
|
|
(saved_func == IMX_SC_MISC_FUNC_UNIQUE_ID ||
|
|
saved_func == IMX_SC_MISC_FUNC_GET_BUTTON_STATUS))
|
|
ret = 0;
|
|
}
|
|
|
|
out:
|
|
sc_ipc->msg = NULL;
|
|
mutex_unlock(&sc_ipc->lock);
|
|
|
|
dev_dbg(sc_ipc->dev, "RPC SVC done\n");
|
|
|
|
return imx_sc_to_linux_errno(ret);
|
|
}
|
|
EXPORT_SYMBOL(imx_scu_call_rpc);
|
|
|
|
static int imx_scu_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct imx_sc_ipc *sc_ipc;
|
|
struct imx_sc_chan *sc_chan;
|
|
struct mbox_client *cl;
|
|
char *chan_name;
|
|
int ret;
|
|
int i;
|
|
|
|
sc_ipc = devm_kzalloc(dev, sizeof(*sc_ipc), GFP_KERNEL);
|
|
if (!sc_ipc)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < SCU_MU_CHAN_NUM; i++) {
|
|
if (i < 4)
|
|
chan_name = kasprintf(GFP_KERNEL, "tx%d", i);
|
|
else
|
|
chan_name = kasprintf(GFP_KERNEL, "rx%d", i - 4);
|
|
|
|
if (!chan_name)
|
|
return -ENOMEM;
|
|
|
|
sc_chan = &sc_ipc->chans[i];
|
|
cl = &sc_chan->cl;
|
|
cl->dev = dev;
|
|
cl->tx_block = false;
|
|
cl->knows_txdone = true;
|
|
cl->rx_callback = imx_scu_rx_callback;
|
|
|
|
/* Initial tx_done completion as "done" */
|
|
cl->tx_done = imx_scu_tx_done;
|
|
init_completion(&sc_chan->tx_done);
|
|
complete(&sc_chan->tx_done);
|
|
|
|
sc_chan->sc_ipc = sc_ipc;
|
|
sc_chan->idx = i % 4;
|
|
sc_chan->ch = mbox_request_channel_byname(cl, chan_name);
|
|
if (IS_ERR(sc_chan->ch)) {
|
|
ret = PTR_ERR(sc_chan->ch);
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "Failed to request mbox chan %s ret %d\n",
|
|
chan_name, ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(dev, "request mbox chan %s\n", chan_name);
|
|
/* chan_name is not used anymore by framework */
|
|
kfree(chan_name);
|
|
}
|
|
|
|
sc_ipc->dev = dev;
|
|
mutex_init(&sc_ipc->lock);
|
|
init_completion(&sc_ipc->done);
|
|
|
|
imx_sc_ipc_handle = sc_ipc;
|
|
|
|
ret = imx_scu_enable_general_irq_channel(dev);
|
|
if (ret)
|
|
dev_warn(dev,
|
|
"failed to enable general irq channel: %d\n", ret);
|
|
|
|
dev_info(dev, "NXP i.MX SCU Initialized\n");
|
|
|
|
return devm_of_platform_populate(dev);
|
|
}
|
|
|
|
static const struct of_device_id imx_scu_match[] = {
|
|
{ .compatible = "fsl,imx-scu", },
|
|
{ /* Sentinel */ }
|
|
};
|
|
|
|
static struct platform_driver imx_scu_driver = {
|
|
.driver = {
|
|
.name = "imx-scu",
|
|
.of_match_table = imx_scu_match,
|
|
},
|
|
.probe = imx_scu_probe,
|
|
};
|
|
builtin_platform_driver(imx_scu_driver);
|
|
|
|
MODULE_AUTHOR("Dong Aisheng <aisheng.dong@nxp.com>");
|
|
MODULE_DESCRIPTION("IMX SCU firmware protocol driver");
|
|
MODULE_LICENSE("GPL v2");
|