mirror of https://gitee.com/openkylin/linux.git
3244 lines
75 KiB
C
3244 lines
75 KiB
C
/*
|
|
* sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
|
|
*
|
|
* Main part
|
|
*
|
|
* Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
|
|
*
|
|
* If distributed as part of the Linux kernel, this code is licensed under the
|
|
* terms of the GPL v2.
|
|
*
|
|
* Otherwise, the following license terms apply:
|
|
*
|
|
* * Redistribution and use in source and binary forms, with or without
|
|
* * modification, are permitted provided that the following conditions
|
|
* * are met:
|
|
* * 1) Redistributions of source code must retain the above copyright
|
|
* * notice, this list of conditions and the following disclaimer.
|
|
* * 2) Redistributions in binary form must reproduce the above copyright
|
|
* * notice, this list of conditions and the following disclaimer in the
|
|
* * documentation and/or other materials provided with the distribution.
|
|
* * 3) The name of the author may not be used to endorse or promote products
|
|
* * derived from this software without specific psisusbr written permission.
|
|
* *
|
|
* * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
|
|
* * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* Author: Thomas Winischhofer <thomas@winischhofer.net>
|
|
*
|
|
*/
|
|
|
|
#include <linux/mutex.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/kref.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include "sisusb.h"
|
|
#include "sisusb_init.h"
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
#include <linux/font.h>
|
|
#endif
|
|
|
|
#define SISUSB_DONTSYNC
|
|
|
|
/* Forward declarations / clean-up routines */
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
static int sisusb_first_vc;
|
|
static int sisusb_last_vc;
|
|
module_param_named(first, sisusb_first_vc, int, 0);
|
|
module_param_named(last, sisusb_last_vc, int, 0);
|
|
MODULE_PARM_DESC(first, "Number of first console to take over (1 - MAX_NR_CONSOLES)");
|
|
MODULE_PARM_DESC(last, "Number of last console to take over (1 - MAX_NR_CONSOLES)");
|
|
#endif
|
|
|
|
static struct usb_driver sisusb_driver;
|
|
|
|
static void sisusb_free_buffers(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUMOBUFS; i++) {
|
|
kfree(sisusb->obuf[i]);
|
|
sisusb->obuf[i] = NULL;
|
|
}
|
|
kfree(sisusb->ibuf);
|
|
sisusb->ibuf = NULL;
|
|
}
|
|
|
|
static void sisusb_free_urbs(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUMOBUFS; i++) {
|
|
usb_free_urb(sisusb->sisurbout[i]);
|
|
sisusb->sisurbout[i] = NULL;
|
|
}
|
|
usb_free_urb(sisusb->sisurbin);
|
|
sisusb->sisurbin = NULL;
|
|
}
|
|
|
|
/* Level 0: USB transport layer */
|
|
|
|
/* 1. out-bulks */
|
|
|
|
/* out-urb management */
|
|
|
|
/* Return 1 if all free, 0 otherwise */
|
|
static int sisusb_all_free(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sisusb->numobufs; i++) {
|
|
|
|
if (sisusb->urbstatus[i] & SU_URB_BUSY)
|
|
return 0;
|
|
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Kill all busy URBs */
|
|
static void sisusb_kill_all_busy(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
if (sisusb_all_free(sisusb))
|
|
return;
|
|
|
|
for (i = 0; i < sisusb->numobufs; i++) {
|
|
|
|
if (sisusb->urbstatus[i] & SU_URB_BUSY)
|
|
usb_kill_urb(sisusb->sisurbout[i]);
|
|
|
|
}
|
|
}
|
|
|
|
/* Return 1 if ok, 0 if error (not all complete within timeout) */
|
|
static int sisusb_wait_all_out_complete(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int timeout = 5 * HZ, i = 1;
|
|
|
|
wait_event_timeout(sisusb->wait_q, (i = sisusb_all_free(sisusb)),
|
|
timeout);
|
|
|
|
return i;
|
|
}
|
|
|
|
static int sisusb_outurb_available(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sisusb->numobufs; i++) {
|
|
|
|
if ((sisusb->urbstatus[i] & (SU_URB_BUSY|SU_URB_ALLOC)) == 0)
|
|
return i;
|
|
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int sisusb_get_free_outbuf(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i, timeout = 5 * HZ;
|
|
|
|
wait_event_timeout(sisusb->wait_q,
|
|
((i = sisusb_outurb_available(sisusb)) >= 0), timeout);
|
|
|
|
return i;
|
|
}
|
|
|
|
static int sisusb_alloc_outbuf(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int i;
|
|
|
|
i = sisusb_outurb_available(sisusb);
|
|
|
|
if (i >= 0)
|
|
sisusb->urbstatus[i] |= SU_URB_ALLOC;
|
|
|
|
return i;
|
|
}
|
|
|
|
static void sisusb_free_outbuf(struct sisusb_usb_data *sisusb, int index)
|
|
{
|
|
if ((index >= 0) && (index < sisusb->numobufs))
|
|
sisusb->urbstatus[index] &= ~SU_URB_ALLOC;
|
|
}
|
|
|
|
/* completion callback */
|
|
|
|
static void sisusb_bulk_completeout(struct urb *urb)
|
|
{
|
|
struct sisusb_urb_context *context = urb->context;
|
|
struct sisusb_usb_data *sisusb;
|
|
|
|
if (!context)
|
|
return;
|
|
|
|
sisusb = context->sisusb;
|
|
|
|
if (!sisusb || !sisusb->sisusb_dev || !sisusb->present)
|
|
return;
|
|
|
|
#ifndef SISUSB_DONTSYNC
|
|
if (context->actual_length)
|
|
*(context->actual_length) += urb->actual_length;
|
|
#endif
|
|
|
|
sisusb->urbstatus[context->urbindex] &= ~SU_URB_BUSY;
|
|
wake_up(&sisusb->wait_q);
|
|
}
|
|
|
|
static int sisusb_bulkout_msg(struct sisusb_usb_data *sisusb, int index,
|
|
unsigned int pipe, void *data, int len, int *actual_length,
|
|
int timeout, unsigned int tflags)
|
|
{
|
|
struct urb *urb = sisusb->sisurbout[index];
|
|
int retval, byteswritten = 0;
|
|
|
|
/* Set up URB */
|
|
urb->transfer_flags = 0;
|
|
|
|
usb_fill_bulk_urb(urb, sisusb->sisusb_dev, pipe, data, len,
|
|
sisusb_bulk_completeout,
|
|
&sisusb->urbout_context[index]);
|
|
|
|
urb->transfer_flags |= tflags;
|
|
urb->actual_length = 0;
|
|
|
|
/* Set up context */
|
|
sisusb->urbout_context[index].actual_length = (timeout) ?
|
|
NULL : actual_length;
|
|
|
|
/* Declare this urb/buffer in use */
|
|
sisusb->urbstatus[index] |= SU_URB_BUSY;
|
|
|
|
/* Submit URB */
|
|
retval = usb_submit_urb(urb, GFP_KERNEL);
|
|
|
|
/* If OK, and if timeout > 0, wait for completion */
|
|
if ((retval == 0) && timeout) {
|
|
wait_event_timeout(sisusb->wait_q,
|
|
(!(sisusb->urbstatus[index] & SU_URB_BUSY)),
|
|
timeout);
|
|
if (sisusb->urbstatus[index] & SU_URB_BUSY) {
|
|
/* URB timed out... kill it and report error */
|
|
usb_kill_urb(urb);
|
|
retval = -ETIMEDOUT;
|
|
} else {
|
|
/* Otherwise, report urb status */
|
|
retval = urb->status;
|
|
byteswritten = urb->actual_length;
|
|
}
|
|
}
|
|
|
|
if (actual_length)
|
|
*actual_length = byteswritten;
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* 2. in-bulks */
|
|
|
|
/* completion callback */
|
|
|
|
static void sisusb_bulk_completein(struct urb *urb)
|
|
{
|
|
struct sisusb_usb_data *sisusb = urb->context;
|
|
|
|
if (!sisusb || !sisusb->sisusb_dev || !sisusb->present)
|
|
return;
|
|
|
|
sisusb->completein = 1;
|
|
wake_up(&sisusb->wait_q);
|
|
}
|
|
|
|
static int sisusb_bulkin_msg(struct sisusb_usb_data *sisusb,
|
|
unsigned int pipe, void *data, int len,
|
|
int *actual_length, int timeout, unsigned int tflags)
|
|
{
|
|
struct urb *urb = sisusb->sisurbin;
|
|
int retval, readbytes = 0;
|
|
|
|
urb->transfer_flags = 0;
|
|
|
|
usb_fill_bulk_urb(urb, sisusb->sisusb_dev, pipe, data, len,
|
|
sisusb_bulk_completein, sisusb);
|
|
|
|
urb->transfer_flags |= tflags;
|
|
urb->actual_length = 0;
|
|
|
|
sisusb->completein = 0;
|
|
retval = usb_submit_urb(urb, GFP_KERNEL);
|
|
if (retval == 0) {
|
|
wait_event_timeout(sisusb->wait_q, sisusb->completein, timeout);
|
|
if (!sisusb->completein) {
|
|
/* URB timed out... kill it and report error */
|
|
usb_kill_urb(urb);
|
|
retval = -ETIMEDOUT;
|
|
} else {
|
|
/* URB completed within timeout */
|
|
retval = urb->status;
|
|
readbytes = urb->actual_length;
|
|
}
|
|
}
|
|
|
|
if (actual_length)
|
|
*actual_length = readbytes;
|
|
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* Level 1: */
|
|
|
|
/* Send a bulk message of variable size
|
|
*
|
|
* To copy the data from userspace, give pointer to "userbuffer",
|
|
* to copy from (non-DMA) kernel memory, give "kernbuffer". If
|
|
* both of these are NULL, it is assumed, that the transfer
|
|
* buffer "sisusb->obuf[index]" is set up with the data to send.
|
|
* Index is ignored if either kernbuffer or userbuffer is set.
|
|
* If async is nonzero, URBs will be sent without waiting for
|
|
* completion of the previous URB.
|
|
*
|
|
* (return 0 on success)
|
|
*/
|
|
|
|
static int sisusb_send_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len,
|
|
char *kernbuffer, const char __user *userbuffer, int index,
|
|
ssize_t *bytes_written, unsigned int tflags, int async)
|
|
{
|
|
int result = 0, retry, count = len;
|
|
int passsize, thispass, transferred_len = 0;
|
|
int fromuser = (userbuffer != NULL) ? 1 : 0;
|
|
int fromkern = (kernbuffer != NULL) ? 1 : 0;
|
|
unsigned int pipe;
|
|
char *buffer;
|
|
|
|
(*bytes_written) = 0;
|
|
|
|
/* Sanity check */
|
|
if (!sisusb || !sisusb->present || !sisusb->sisusb_dev)
|
|
return -ENODEV;
|
|
|
|
/* If we copy data from kernel or userspace, force the
|
|
* allocation of a buffer/urb. If we have the data in
|
|
* the transfer buffer[index] already, reuse the buffer/URB
|
|
* if the length is > buffer size. (So, transmitting
|
|
* large data amounts directly from the transfer buffer
|
|
* treats the buffer as a ring buffer. However, we need
|
|
* to sync in this case.)
|
|
*/
|
|
if (fromuser || fromkern)
|
|
index = -1;
|
|
else if (len > sisusb->obufsize)
|
|
async = 0;
|
|
|
|
pipe = usb_sndbulkpipe(sisusb->sisusb_dev, ep);
|
|
|
|
do {
|
|
passsize = thispass = (sisusb->obufsize < count) ?
|
|
sisusb->obufsize : count;
|
|
|
|
if (index < 0)
|
|
index = sisusb_get_free_outbuf(sisusb);
|
|
|
|
if (index < 0)
|
|
return -EIO;
|
|
|
|
buffer = sisusb->obuf[index];
|
|
|
|
if (fromuser) {
|
|
|
|
if (copy_from_user(buffer, userbuffer, passsize))
|
|
return -EFAULT;
|
|
|
|
userbuffer += passsize;
|
|
|
|
} else if (fromkern) {
|
|
|
|
memcpy(buffer, kernbuffer, passsize);
|
|
kernbuffer += passsize;
|
|
|
|
}
|
|
|
|
retry = 5;
|
|
while (thispass) {
|
|
|
|
if (!sisusb->sisusb_dev)
|
|
return -ENODEV;
|
|
|
|
result = sisusb_bulkout_msg(sisusb, index, pipe,
|
|
buffer, thispass, &transferred_len,
|
|
async ? 0 : 5 * HZ, tflags);
|
|
|
|
if (result == -ETIMEDOUT) {
|
|
|
|
/* Will not happen if async */
|
|
if (!retry--)
|
|
return -ETIME;
|
|
|
|
continue;
|
|
}
|
|
|
|
if ((result == 0) && !async && transferred_len) {
|
|
|
|
thispass -= transferred_len;
|
|
buffer += transferred_len;
|
|
|
|
} else
|
|
break;
|
|
}
|
|
|
|
if (result)
|
|
return result;
|
|
|
|
(*bytes_written) += passsize;
|
|
count -= passsize;
|
|
|
|
/* Force new allocation in next iteration */
|
|
if (fromuser || fromkern)
|
|
index = -1;
|
|
|
|
} while (count > 0);
|
|
|
|
if (async) {
|
|
#ifdef SISUSB_DONTSYNC
|
|
(*bytes_written) = len;
|
|
/* Some URBs/buffers might be busy */
|
|
#else
|
|
sisusb_wait_all_out_complete(sisusb);
|
|
(*bytes_written) = transferred_len;
|
|
/* All URBs and all buffers are available */
|
|
#endif
|
|
}
|
|
|
|
return ((*bytes_written) == len) ? 0 : -EIO;
|
|
}
|
|
|
|
/* Receive a bulk message of variable size
|
|
*
|
|
* To copy the data to userspace, give pointer to "userbuffer",
|
|
* to copy to kernel memory, give "kernbuffer". One of them
|
|
* MUST be set. (There is no technique for letting the caller
|
|
* read directly from the ibuf.)
|
|
*
|
|
*/
|
|
|
|
static int sisusb_recv_bulk_msg(struct sisusb_usb_data *sisusb, int ep, int len,
|
|
void *kernbuffer, char __user *userbuffer, ssize_t *bytes_read,
|
|
unsigned int tflags)
|
|
{
|
|
int result = 0, retry, count = len;
|
|
int bufsize, thispass, transferred_len;
|
|
unsigned int pipe;
|
|
char *buffer;
|
|
|
|
(*bytes_read) = 0;
|
|
|
|
/* Sanity check */
|
|
if (!sisusb || !sisusb->present || !sisusb->sisusb_dev)
|
|
return -ENODEV;
|
|
|
|
pipe = usb_rcvbulkpipe(sisusb->sisusb_dev, ep);
|
|
buffer = sisusb->ibuf;
|
|
bufsize = sisusb->ibufsize;
|
|
|
|
retry = 5;
|
|
|
|
#ifdef SISUSB_DONTSYNC
|
|
if (!(sisusb_wait_all_out_complete(sisusb)))
|
|
return -EIO;
|
|
#endif
|
|
|
|
while (count > 0) {
|
|
|
|
if (!sisusb->sisusb_dev)
|
|
return -ENODEV;
|
|
|
|
thispass = (bufsize < count) ? bufsize : count;
|
|
|
|
result = sisusb_bulkin_msg(sisusb, pipe, buffer, thispass,
|
|
&transferred_len, 5 * HZ, tflags);
|
|
|
|
if (transferred_len)
|
|
thispass = transferred_len;
|
|
|
|
else if (result == -ETIMEDOUT) {
|
|
|
|
if (!retry--)
|
|
return -ETIME;
|
|
|
|
continue;
|
|
|
|
} else
|
|
return -EIO;
|
|
|
|
|
|
if (thispass) {
|
|
|
|
(*bytes_read) += thispass;
|
|
count -= thispass;
|
|
|
|
if (userbuffer) {
|
|
|
|
if (copy_to_user(userbuffer, buffer, thispass))
|
|
return -EFAULT;
|
|
|
|
userbuffer += thispass;
|
|
|
|
} else {
|
|
|
|
memcpy(kernbuffer, buffer, thispass);
|
|
kernbuffer += thispass;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ((*bytes_read) == len) ? 0 : -EIO;
|
|
}
|
|
|
|
static int sisusb_send_packet(struct sisusb_usb_data *sisusb, int len,
|
|
struct sisusb_packet *packet)
|
|
{
|
|
int ret;
|
|
ssize_t bytes_transferred = 0;
|
|
__le32 tmp;
|
|
|
|
if (len == 6)
|
|
packet->data = 0;
|
|
|
|
#ifdef SISUSB_DONTSYNC
|
|
if (!(sisusb_wait_all_out_complete(sisusb)))
|
|
return 1;
|
|
#endif
|
|
|
|
/* Eventually correct endianness */
|
|
SISUSB_CORRECT_ENDIANNESS_PACKET(packet);
|
|
|
|
/* 1. send the packet */
|
|
ret = sisusb_send_bulk_msg(sisusb, SISUSB_EP_GFX_OUT, len,
|
|
(char *)packet, NULL, 0, &bytes_transferred, 0, 0);
|
|
|
|
if ((ret == 0) && (len == 6)) {
|
|
|
|
/* 2. if packet len == 6, it means we read, so wait for 32bit
|
|
* return value and write it to packet->data
|
|
*/
|
|
ret = sisusb_recv_bulk_msg(sisusb, SISUSB_EP_GFX_IN, 4,
|
|
(char *)&tmp, NULL, &bytes_transferred, 0);
|
|
|
|
packet->data = le32_to_cpu(tmp);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_send_bridge_packet(struct sisusb_usb_data *sisusb, int len,
|
|
struct sisusb_packet *packet, unsigned int tflags)
|
|
{
|
|
int ret;
|
|
ssize_t bytes_transferred = 0;
|
|
__le32 tmp;
|
|
|
|
if (len == 6)
|
|
packet->data = 0;
|
|
|
|
#ifdef SISUSB_DONTSYNC
|
|
if (!(sisusb_wait_all_out_complete(sisusb)))
|
|
return 1;
|
|
#endif
|
|
|
|
/* Eventually correct endianness */
|
|
SISUSB_CORRECT_ENDIANNESS_PACKET(packet);
|
|
|
|
/* 1. send the packet */
|
|
ret = sisusb_send_bulk_msg(sisusb, SISUSB_EP_BRIDGE_OUT, len,
|
|
(char *)packet, NULL, 0, &bytes_transferred, tflags, 0);
|
|
|
|
if ((ret == 0) && (len == 6)) {
|
|
|
|
/* 2. if packet len == 6, it means we read, so wait for 32bit
|
|
* return value and write it to packet->data
|
|
*/
|
|
ret = sisusb_recv_bulk_msg(sisusb, SISUSB_EP_BRIDGE_IN, 4,
|
|
(char *)&tmp, NULL, &bytes_transferred, 0);
|
|
|
|
packet->data = le32_to_cpu(tmp);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* access video memory and mmio (return 0 on success) */
|
|
|
|
/* Low level */
|
|
|
|
/* The following routines assume being used to transfer byte, word,
|
|
* long etc.
|
|
* This means that
|
|
* - the write routines expect "data" in machine endianness format.
|
|
* The data will be converted to leXX in sisusb_xxx_packet.
|
|
* - the read routines can expect read data in machine-endianess.
|
|
*/
|
|
|
|
static int sisusb_write_memio_byte(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u8 data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret;
|
|
|
|
packet.header = (1 << (addr & 3)) | (type << 6);
|
|
packet.address = addr & ~3;
|
|
packet.data = data << ((addr & 3) << 3);
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_write_memio_word(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u16 data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x0003;
|
|
packet.data = (u32)data;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x0006;
|
|
packet.data = (u32)data << 8;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
packet.data = (u32)data << 16;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
packet.data = (u32)data << 24;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = (u32)data >> 8;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_write_memio_24bit(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u32 data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x0007;
|
|
packet.data = data & 0x00ffffff;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x000e;
|
|
packet.data = data << 8;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
packet.data = data << 16;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = (data >> 16) & 0x00ff;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
packet.data = data << 24;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0003;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = (data >> 8) & 0xffff;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_write_memio_long(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u32 data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x000f;
|
|
packet.data = data;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x000e;
|
|
packet.data = data << 8;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = data >> 24;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
packet.data = data << 16;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0003;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = data >> 16;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
packet.data = data << 24;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
packet.header = (type << 6) | 0x0007;
|
|
packet.address = (addr & ~3) + 4;
|
|
packet.data = data >> 8;
|
|
ret |= sisusb_send_packet(sisusb, 10, &packet);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* The xxx_bulk routines copy a buffer of variable size. They treat the
|
|
* buffer as chars, therefore lsb/msb has to be corrected if using the
|
|
* byte/word/long/etc routines for speed-up
|
|
*
|
|
* If data is from userland, set "userbuffer" (and clear "kernbuffer"),
|
|
* if data is in kernel space, set "kernbuffer" (and clear "userbuffer");
|
|
* if neither "kernbuffer" nor "userbuffer" are given, it is assumed
|
|
* that the data already is in the transfer buffer "sisusb->obuf[index]".
|
|
*/
|
|
|
|
static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
|
|
char *kernbuffer, int length, const char __user *userbuffer,
|
|
int index, ssize_t *bytes_written)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
static int msgcount;
|
|
u8 swap8, fromkern = kernbuffer ? 1 : 0;
|
|
u16 swap16;
|
|
u32 swap32, flag = (length >> 28) & 1;
|
|
char buf[4];
|
|
|
|
/* if neither kernbuffer not userbuffer are given, assume
|
|
* data in obuf
|
|
*/
|
|
if (!fromkern && !userbuffer)
|
|
kernbuffer = sisusb->obuf[index];
|
|
|
|
(*bytes_written = 0);
|
|
|
|
length &= 0x00ffffff;
|
|
|
|
while (length) {
|
|
switch (length) {
|
|
case 1:
|
|
if (userbuffer) {
|
|
if (get_user(swap8, (u8 __user *)userbuffer))
|
|
return -EFAULT;
|
|
} else
|
|
swap8 = kernbuffer[0];
|
|
|
|
ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM,
|
|
addr, swap8);
|
|
|
|
if (!ret)
|
|
(*bytes_written)++;
|
|
|
|
return ret;
|
|
|
|
case 2:
|
|
if (userbuffer) {
|
|
if (get_user(swap16, (u16 __user *)userbuffer))
|
|
return -EFAULT;
|
|
} else
|
|
swap16 = *((u16 *)kernbuffer);
|
|
|
|
ret = sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
addr, swap16);
|
|
|
|
if (!ret)
|
|
(*bytes_written) += 2;
|
|
|
|
return ret;
|
|
|
|
case 3:
|
|
if (userbuffer) {
|
|
if (copy_from_user(&buf, userbuffer, 3))
|
|
return -EFAULT;
|
|
#ifdef __BIG_ENDIAN
|
|
swap32 = (buf[0] << 16) |
|
|
(buf[1] << 8) |
|
|
buf[2];
|
|
#else
|
|
swap32 = (buf[2] << 16) |
|
|
(buf[1] << 8) |
|
|
buf[0];
|
|
#endif
|
|
} else
|
|
#ifdef __BIG_ENDIAN
|
|
swap32 = (kernbuffer[0] << 16) |
|
|
(kernbuffer[1] << 8) |
|
|
kernbuffer[2];
|
|
#else
|
|
swap32 = (kernbuffer[2] << 16) |
|
|
(kernbuffer[1] << 8) |
|
|
kernbuffer[0];
|
|
#endif
|
|
|
|
ret = sisusb_write_memio_24bit(sisusb, SISUSB_TYPE_MEM,
|
|
addr, swap32);
|
|
|
|
if (!ret)
|
|
(*bytes_written) += 3;
|
|
|
|
return ret;
|
|
|
|
case 4:
|
|
if (userbuffer) {
|
|
if (get_user(swap32, (u32 __user *)userbuffer))
|
|
return -EFAULT;
|
|
} else
|
|
swap32 = *((u32 *)kernbuffer);
|
|
|
|
ret = sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM,
|
|
addr, swap32);
|
|
if (!ret)
|
|
(*bytes_written) += 4;
|
|
|
|
return ret;
|
|
|
|
default:
|
|
if ((length & ~3) > 0x10000) {
|
|
|
|
packet.header = 0x001f;
|
|
packet.address = 0x000001d4;
|
|
packet.data = addr;
|
|
ret = sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
packet.header = 0x001f;
|
|
packet.address = 0x000001d0;
|
|
packet.data = (length & ~3);
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
packet.header = 0x001f;
|
|
packet.address = 0x000001c0;
|
|
packet.data = flag | 0x16;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
if (userbuffer) {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_LBULK_OUT,
|
|
(length & ~3),
|
|
NULL, userbuffer, 0,
|
|
bytes_written, 0, 1);
|
|
userbuffer += (*bytes_written);
|
|
} else if (fromkern) {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_LBULK_OUT,
|
|
(length & ~3),
|
|
kernbuffer, NULL, 0,
|
|
bytes_written, 0, 1);
|
|
kernbuffer += (*bytes_written);
|
|
} else {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_LBULK_OUT,
|
|
(length & ~3),
|
|
NULL, NULL, index,
|
|
bytes_written, 0, 1);
|
|
kernbuffer += ((*bytes_written) &
|
|
(sisusb->obufsize-1));
|
|
}
|
|
|
|
} else {
|
|
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000194;
|
|
packet.data = addr;
|
|
ret = sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000190;
|
|
packet.data = (length & ~3);
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10,
|
|
&packet, 0);
|
|
if (sisusb->flagb0 != 0x16) {
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000180;
|
|
packet.data = flag | 0x16;
|
|
ret |= sisusb_send_bridge_packet(sisusb,
|
|
10, &packet, 0);
|
|
sisusb->flagb0 = 0x16;
|
|
}
|
|
if (userbuffer) {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_BULK_OUT,
|
|
(length & ~3),
|
|
NULL, userbuffer, 0,
|
|
bytes_written, 0, 1);
|
|
userbuffer += (*bytes_written);
|
|
} else if (fromkern) {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_BULK_OUT,
|
|
(length & ~3),
|
|
kernbuffer, NULL, 0,
|
|
bytes_written, 0, 1);
|
|
kernbuffer += (*bytes_written);
|
|
} else {
|
|
ret |= sisusb_send_bulk_msg(sisusb,
|
|
SISUSB_EP_GFX_BULK_OUT,
|
|
(length & ~3),
|
|
NULL, NULL, index,
|
|
bytes_written, 0, 1);
|
|
kernbuffer += ((*bytes_written) &
|
|
(sisusb->obufsize-1));
|
|
}
|
|
}
|
|
if (ret) {
|
|
msgcount++;
|
|
if (msgcount < 500)
|
|
dev_err(&sisusb->sisusb_dev->dev,
|
|
"Wrote %zd of %d bytes, error %d\n",
|
|
*bytes_written, length,
|
|
ret);
|
|
else if (msgcount == 500)
|
|
dev_err(&sisusb->sisusb_dev->dev,
|
|
"Too many errors, logging stopped\n");
|
|
}
|
|
addr += (*bytes_written);
|
|
length -= (*bytes_written);
|
|
}
|
|
|
|
if (ret)
|
|
break;
|
|
|
|
}
|
|
|
|
return ret ? -EIO : 0;
|
|
}
|
|
|
|
/* Remember: Read data in packet is in machine-endianess! So for
|
|
* byte, word, 24bit, long no endian correction is necessary.
|
|
*/
|
|
|
|
static int sisusb_read_memio_byte(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u8 *data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret;
|
|
|
|
CLEARPACKET(&packet);
|
|
packet.header = (1 << (addr & 3)) | (type << 6);
|
|
packet.address = addr & ~3;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = (u8)(packet.data >> ((addr & 3) << 3));
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_read_memio_word(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u16 *data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
CLEARPACKET(&packet);
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x0003;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = (u16)(packet.data);
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x0006;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = (u16)(packet.data >> 8);
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = (u16)(packet.data >> 16);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = (u16)(packet.data >> 24);
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= (u16)(packet.data << 8);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_read_memio_24bit(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u32 *data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x0007;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data & 0x00ffffff;
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x000e;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 8;
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 16;
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= ((packet.data & 0xff) << 16);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 24;
|
|
packet.header = (type << 6) | 0x0003;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= ((packet.data & 0xffff) << 8);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_read_memio_long(struct sisusb_usb_data *sisusb, int type,
|
|
u32 addr, u32 *data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret = 0;
|
|
|
|
packet.address = addr & ~3;
|
|
|
|
switch (addr & 3) {
|
|
case 0:
|
|
packet.header = (type << 6) | 0x000f;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data;
|
|
break;
|
|
case 1:
|
|
packet.header = (type << 6) | 0x000e;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 8;
|
|
packet.header = (type << 6) | 0x0001;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= (packet.data << 24);
|
|
break;
|
|
case 2:
|
|
packet.header = (type << 6) | 0x000c;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 16;
|
|
packet.header = (type << 6) | 0x0003;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= (packet.data << 16);
|
|
break;
|
|
case 3:
|
|
packet.header = (type << 6) | 0x0008;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data >> 24;
|
|
packet.header = (type << 6) | 0x0007;
|
|
packet.address = (addr & ~3) + 4;
|
|
ret |= sisusb_send_packet(sisusb, 6, &packet);
|
|
*data |= (packet.data << 8);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr,
|
|
char *kernbuffer, int length, char __user *userbuffer,
|
|
ssize_t *bytes_read)
|
|
{
|
|
int ret = 0;
|
|
char buf[4];
|
|
u16 swap16;
|
|
u32 swap32;
|
|
|
|
(*bytes_read = 0);
|
|
|
|
length &= 0x00ffffff;
|
|
|
|
while (length) {
|
|
switch (length) {
|
|
case 1:
|
|
ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM,
|
|
addr, &buf[0]);
|
|
if (!ret) {
|
|
(*bytes_read)++;
|
|
if (userbuffer) {
|
|
if (put_user(buf[0], (u8 __user *)userbuffer))
|
|
return -EFAULT;
|
|
} else
|
|
kernbuffer[0] = buf[0];
|
|
}
|
|
return ret;
|
|
|
|
case 2:
|
|
ret |= sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
addr, &swap16);
|
|
if (!ret) {
|
|
(*bytes_read) += 2;
|
|
if (userbuffer) {
|
|
if (put_user(swap16, (u16 __user *)userbuffer))
|
|
return -EFAULT;
|
|
} else {
|
|
*((u16 *)kernbuffer) = swap16;
|
|
}
|
|
}
|
|
return ret;
|
|
|
|
case 3:
|
|
ret |= sisusb_read_memio_24bit(sisusb, SISUSB_TYPE_MEM,
|
|
addr, &swap32);
|
|
if (!ret) {
|
|
(*bytes_read) += 3;
|
|
#ifdef __BIG_ENDIAN
|
|
buf[0] = (swap32 >> 16) & 0xff;
|
|
buf[1] = (swap32 >> 8) & 0xff;
|
|
buf[2] = swap32 & 0xff;
|
|
#else
|
|
buf[2] = (swap32 >> 16) & 0xff;
|
|
buf[1] = (swap32 >> 8) & 0xff;
|
|
buf[0] = swap32 & 0xff;
|
|
#endif
|
|
if (userbuffer) {
|
|
if (copy_to_user(userbuffer,
|
|
&buf[0], 3))
|
|
return -EFAULT;
|
|
} else {
|
|
kernbuffer[0] = buf[0];
|
|
kernbuffer[1] = buf[1];
|
|
kernbuffer[2] = buf[2];
|
|
}
|
|
}
|
|
return ret;
|
|
|
|
default:
|
|
ret |= sisusb_read_memio_long(sisusb, SISUSB_TYPE_MEM,
|
|
addr, &swap32);
|
|
if (!ret) {
|
|
(*bytes_read) += 4;
|
|
if (userbuffer) {
|
|
if (put_user(swap32, (u32 __user *)userbuffer))
|
|
return -EFAULT;
|
|
|
|
userbuffer += 4;
|
|
} else {
|
|
*((u32 *)kernbuffer) = swap32;
|
|
kernbuffer += 4;
|
|
}
|
|
addr += 4;
|
|
length -= 4;
|
|
}
|
|
}
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* High level: Gfx (indexed) register access */
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data)
|
|
{
|
|
return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
|
|
}
|
|
|
|
int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data)
|
|
{
|
|
return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
|
|
}
|
|
#endif
|
|
|
|
int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
|
|
u8 index, u8 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, index);
|
|
ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, data);
|
|
return ret;
|
|
}
|
|
|
|
int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
|
|
u8 index, u8 *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, index);
|
|
ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, data);
|
|
return ret;
|
|
}
|
|
|
|
int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx,
|
|
u8 myand, u8 myor)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, idx);
|
|
ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, &tmp);
|
|
tmp &= myand;
|
|
tmp |= myor;
|
|
ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, tmp);
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_setidxregmask(struct sisusb_usb_data *sisusb,
|
|
int port, u8 idx, u8 data, u8 mask)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
ret = sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, idx);
|
|
ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, &tmp);
|
|
tmp &= ~(mask);
|
|
tmp |= (data & mask);
|
|
ret |= sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port + 1, tmp);
|
|
return ret;
|
|
}
|
|
|
|
int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
|
|
u8 index, u8 myor)
|
|
{
|
|
return sisusb_setidxregandor(sisusb, port, index, 0xff, myor);
|
|
}
|
|
|
|
int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
|
|
u8 idx, u8 myand)
|
|
{
|
|
return sisusb_setidxregandor(sisusb, port, idx, myand, 0x00);
|
|
}
|
|
|
|
/* Write/read video ram */
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data)
|
|
{
|
|
return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data);
|
|
}
|
|
|
|
int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data)
|
|
{
|
|
return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data);
|
|
}
|
|
|
|
int sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src,
|
|
u32 dest, int length)
|
|
{
|
|
size_t dummy;
|
|
|
|
return sisusb_write_mem_bulk(sisusb, dest, src, length,
|
|
NULL, 0, &dummy);
|
|
}
|
|
|
|
#ifdef SISUSBENDIANTEST
|
|
static int sisusb_read_memory(struct sisusb_usb_data *sisusb, char *dest,
|
|
u32 src, int length)
|
|
{
|
|
size_t dummy;
|
|
|
|
return sisusb_read_mem_bulk(sisusb, src, dest, length,
|
|
NULL, &dummy);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef SISUSBENDIANTEST
|
|
static void sisusb_testreadwrite(struct sisusb_usb_data *sisusb)
|
|
{
|
|
static char srcbuffer[] = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 };
|
|
char destbuffer[10];
|
|
int i, j;
|
|
|
|
sisusb_copy_memory(sisusb, srcbuffer, sisusb->vrambase, 7);
|
|
|
|
for (i = 1; i <= 7; i++) {
|
|
dev_dbg(&sisusb->sisusb_dev->dev,
|
|
"sisusb: rwtest %d bytes\n", i);
|
|
sisusb_read_memory(sisusb, destbuffer, sisusb->vrambase, i);
|
|
for (j = 0; j < i; j++) {
|
|
dev_dbg(&sisusb->sisusb_dev->dev,
|
|
"rwtest read[%d] = %x\n",
|
|
j, destbuffer[j]);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* access pci config registers (reg numbers 0, 4, 8, etc) */
|
|
|
|
static int sisusb_write_pci_config(struct sisusb_usb_data *sisusb,
|
|
int regnum, u32 data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret;
|
|
|
|
packet.header = 0x008f;
|
|
packet.address = regnum | 0x10000;
|
|
packet.data = data;
|
|
ret = sisusb_send_packet(sisusb, 10, &packet);
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_read_pci_config(struct sisusb_usb_data *sisusb,
|
|
int regnum, u32 *data)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret;
|
|
|
|
packet.header = 0x008f;
|
|
packet.address = (u32)regnum | 0x10000;
|
|
ret = sisusb_send_packet(sisusb, 6, &packet);
|
|
*data = packet.data;
|
|
return ret;
|
|
}
|
|
|
|
/* Clear video RAM */
|
|
|
|
static int sisusb_clear_vram(struct sisusb_usb_data *sisusb,
|
|
u32 address, int length)
|
|
{
|
|
int ret, i;
|
|
ssize_t j;
|
|
|
|
if (address < sisusb->vrambase)
|
|
return 1;
|
|
|
|
if (address >= sisusb->vrambase + sisusb->vramsize)
|
|
return 1;
|
|
|
|
if (address + length > sisusb->vrambase + sisusb->vramsize)
|
|
length = sisusb->vrambase + sisusb->vramsize - address;
|
|
|
|
if (length <= 0)
|
|
return 0;
|
|
|
|
/* allocate free buffer/urb and clear the buffer */
|
|
i = sisusb_alloc_outbuf(sisusb);
|
|
if (i < 0)
|
|
return -EBUSY;
|
|
|
|
memset(sisusb->obuf[i], 0, sisusb->obufsize);
|
|
|
|
/* We can write a length > buffer size here. The buffer
|
|
* data will simply be re-used (like a ring-buffer).
|
|
*/
|
|
ret = sisusb_write_mem_bulk(sisusb, address, NULL, length, NULL, i, &j);
|
|
|
|
/* Free the buffer/urb */
|
|
sisusb_free_outbuf(sisusb, i);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Initialize the graphics core (return 0 on success)
|
|
* This resets the graphics hardware and puts it into
|
|
* a defined mode (640x480@60Hz)
|
|
*/
|
|
|
|
#define GETREG(r, d) sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, r, d)
|
|
#define SETREG(r, d) sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, r, d)
|
|
#define SETIREG(r, i, d) sisusb_setidxreg(sisusb, r, i, d)
|
|
#define GETIREG(r, i, d) sisusb_getidxreg(sisusb, r, i, d)
|
|
#define SETIREGOR(r, i, o) sisusb_setidxregor(sisusb, r, i, o)
|
|
#define SETIREGAND(r, i, a) sisusb_setidxregand(sisusb, r, i, a)
|
|
#define SETIREGANDOR(r, i, a, o) sisusb_setidxregandor(sisusb, r, i, a, o)
|
|
#define READL(a, d) sisusb_read_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
|
|
#define WRITEL(a, d) sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM, a, d)
|
|
#define READB(a, d) sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
|
|
#define WRITEB(a, d) sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, a, d)
|
|
|
|
static int sisusb_triggersr16(struct sisusb_usb_data *sisusb, u8 ramtype)
|
|
{
|
|
int ret;
|
|
u8 tmp8;
|
|
|
|
ret = GETIREG(SISSR, 0x16, &tmp8);
|
|
if (ramtype <= 1) {
|
|
tmp8 &= 0x3f;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 |= 0x80;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
} else {
|
|
tmp8 |= 0xc0;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 &= 0x0f;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 |= 0x80;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 &= 0x0f;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 |= 0xd0;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 &= 0x0f;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
tmp8 |= 0xa0;
|
|
ret |= SETIREG(SISSR, 0x16, tmp8);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_getbuswidth(struct sisusb_usb_data *sisusb,
|
|
int *bw, int *chab)
|
|
{
|
|
int ret;
|
|
u8 ramtype, done = 0;
|
|
u32 t0, t1, t2, t3;
|
|
u32 ramptr = SISUSB_PCI_MEMBASE;
|
|
|
|
ret = GETIREG(SISSR, 0x3a, &ramtype);
|
|
ramtype &= 3;
|
|
|
|
ret |= SETIREG(SISSR, 0x13, 0x00);
|
|
|
|
if (ramtype <= 1) {
|
|
ret |= SETIREG(SISSR, 0x14, 0x12);
|
|
ret |= SETIREGAND(SISSR, 0x15, 0xef);
|
|
} else {
|
|
ret |= SETIREG(SISSR, 0x14, 0x02);
|
|
}
|
|
|
|
ret |= sisusb_triggersr16(sisusb, ramtype);
|
|
ret |= WRITEL(ramptr + 0, 0x01234567);
|
|
ret |= WRITEL(ramptr + 4, 0x456789ab);
|
|
ret |= WRITEL(ramptr + 8, 0x89abcdef);
|
|
ret |= WRITEL(ramptr + 12, 0xcdef0123);
|
|
ret |= WRITEL(ramptr + 16, 0x55555555);
|
|
ret |= WRITEL(ramptr + 20, 0x55555555);
|
|
ret |= WRITEL(ramptr + 24, 0xffffffff);
|
|
ret |= WRITEL(ramptr + 28, 0xffffffff);
|
|
ret |= READL(ramptr + 0, &t0);
|
|
ret |= READL(ramptr + 4, &t1);
|
|
ret |= READL(ramptr + 8, &t2);
|
|
ret |= READL(ramptr + 12, &t3);
|
|
|
|
if (ramtype <= 1) {
|
|
|
|
*chab = 0; *bw = 64;
|
|
|
|
if ((t3 != 0xcdef0123) || (t2 != 0x89abcdef)) {
|
|
if ((t1 == 0x456789ab) && (t0 == 0x01234567)) {
|
|
*chab = 0; *bw = 64;
|
|
ret |= SETIREGAND(SISSR, 0x14, 0xfd);
|
|
}
|
|
}
|
|
if ((t1 != 0x456789ab) || (t0 != 0x01234567)) {
|
|
*chab = 1; *bw = 64;
|
|
ret |= SETIREGANDOR(SISSR, 0x14, 0xfc, 0x01);
|
|
|
|
ret |= sisusb_triggersr16(sisusb, ramtype);
|
|
ret |= WRITEL(ramptr + 0, 0x89abcdef);
|
|
ret |= WRITEL(ramptr + 4, 0xcdef0123);
|
|
ret |= WRITEL(ramptr + 8, 0x55555555);
|
|
ret |= WRITEL(ramptr + 12, 0x55555555);
|
|
ret |= WRITEL(ramptr + 16, 0xaaaaaaaa);
|
|
ret |= WRITEL(ramptr + 20, 0xaaaaaaaa);
|
|
ret |= READL(ramptr + 4, &t1);
|
|
|
|
if (t1 != 0xcdef0123) {
|
|
*bw = 32;
|
|
ret |= SETIREGOR(SISSR, 0x15, 0x10);
|
|
}
|
|
}
|
|
|
|
} else {
|
|
|
|
*chab = 0; *bw = 64; /* default: cha, bw = 64 */
|
|
|
|
done = 0;
|
|
|
|
if (t1 == 0x456789ab) {
|
|
if (t0 == 0x01234567) {
|
|
*chab = 0; *bw = 64;
|
|
done = 1;
|
|
}
|
|
} else {
|
|
if (t0 == 0x01234567) {
|
|
*chab = 0; *bw = 32;
|
|
ret |= SETIREG(SISSR, 0x14, 0x00);
|
|
done = 1;
|
|
}
|
|
}
|
|
|
|
if (!done) {
|
|
ret |= SETIREG(SISSR, 0x14, 0x03);
|
|
ret |= sisusb_triggersr16(sisusb, ramtype);
|
|
|
|
ret |= WRITEL(ramptr + 0, 0x01234567);
|
|
ret |= WRITEL(ramptr + 4, 0x456789ab);
|
|
ret |= WRITEL(ramptr + 8, 0x89abcdef);
|
|
ret |= WRITEL(ramptr + 12, 0xcdef0123);
|
|
ret |= WRITEL(ramptr + 16, 0x55555555);
|
|
ret |= WRITEL(ramptr + 20, 0x55555555);
|
|
ret |= WRITEL(ramptr + 24, 0xffffffff);
|
|
ret |= WRITEL(ramptr + 28, 0xffffffff);
|
|
ret |= READL(ramptr + 0, &t0);
|
|
ret |= READL(ramptr + 4, &t1);
|
|
|
|
if (t1 == 0x456789ab) {
|
|
if (t0 == 0x01234567) {
|
|
*chab = 1; *bw = 64;
|
|
return ret;
|
|
} /* else error */
|
|
} else {
|
|
if (t0 == 0x01234567) {
|
|
*chab = 1; *bw = 32;
|
|
ret |= SETIREG(SISSR, 0x14, 0x01);
|
|
} /* else error */
|
|
}
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_verify_mclk(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int ret = 0;
|
|
u32 ramptr = SISUSB_PCI_MEMBASE;
|
|
u8 tmp1, tmp2, i, j;
|
|
|
|
ret |= WRITEB(ramptr, 0xaa);
|
|
ret |= WRITEB(ramptr + 16, 0x55);
|
|
ret |= READB(ramptr, &tmp1);
|
|
ret |= READB(ramptr + 16, &tmp2);
|
|
if ((tmp1 != 0xaa) || (tmp2 != 0x55)) {
|
|
for (i = 0, j = 16; i < 2; i++, j += 16) {
|
|
ret |= GETIREG(SISSR, 0x21, &tmp1);
|
|
ret |= SETIREGAND(SISSR, 0x21, (tmp1 & 0xfb));
|
|
ret |= SETIREGOR(SISSR, 0x3c, 0x01); /* not on 330 */
|
|
ret |= SETIREGAND(SISSR, 0x3c, 0xfe); /* not on 330 */
|
|
ret |= SETIREG(SISSR, 0x21, tmp1);
|
|
ret |= WRITEB(ramptr + 16 + j, j);
|
|
ret |= READB(ramptr + 16 + j, &tmp1);
|
|
if (tmp1 == j) {
|
|
ret |= WRITEB(ramptr + j, j);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_set_rank(struct sisusb_usb_data *sisusb, int *iret,
|
|
int index, u8 rankno, u8 chab, const u8 dramtype[][5], int bw)
|
|
{
|
|
int ret = 0, ranksize;
|
|
u8 tmp;
|
|
|
|
*iret = 0;
|
|
|
|
if ((rankno == 2) && (dramtype[index][0] == 2))
|
|
return ret;
|
|
|
|
ranksize = dramtype[index][3] / 2 * bw / 32;
|
|
|
|
if ((ranksize * rankno) > 128)
|
|
return ret;
|
|
|
|
tmp = 0;
|
|
while ((ranksize >>= 1) > 0)
|
|
tmp += 0x10;
|
|
|
|
tmp |= ((rankno - 1) << 2);
|
|
tmp |= ((bw / 64) & 0x02);
|
|
tmp |= (chab & 0x01);
|
|
|
|
ret = SETIREG(SISSR, 0x14, tmp);
|
|
ret |= sisusb_triggersr16(sisusb, 0); /* sic! */
|
|
|
|
*iret = 1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_check_rbc(struct sisusb_usb_data *sisusb, int *iret,
|
|
u32 inc, int testn)
|
|
{
|
|
int ret = 0, i;
|
|
u32 j, tmp;
|
|
|
|
*iret = 0;
|
|
|
|
for (i = 0, j = 0; i < testn; i++) {
|
|
ret |= WRITEL(sisusb->vrambase + j, j);
|
|
j += inc;
|
|
}
|
|
|
|
for (i = 0, j = 0; i < testn; i++) {
|
|
ret |= READL(sisusb->vrambase + j, &tmp);
|
|
if (tmp != j)
|
|
return ret;
|
|
|
|
j += inc;
|
|
}
|
|
|
|
*iret = 1;
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_check_ranks(struct sisusb_usb_data *sisusb,
|
|
int *iret, int rankno, int idx, int bw, const u8 rtype[][5])
|
|
{
|
|
int ret = 0, i, i2ret;
|
|
u32 inc;
|
|
|
|
*iret = 0;
|
|
|
|
for (i = rankno; i >= 1; i--) {
|
|
inc = 1 << (rtype[idx][2] + rtype[idx][1] + rtype[idx][0] +
|
|
bw / 64 + i);
|
|
ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 2);
|
|
if (!i2ret)
|
|
return ret;
|
|
}
|
|
|
|
inc = 1 << (rtype[idx][2] + bw / 64 + 2);
|
|
ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 4);
|
|
if (!i2ret)
|
|
return ret;
|
|
|
|
inc = 1 << (10 + bw / 64);
|
|
ret |= sisusb_check_rbc(sisusb, &i2ret, inc, 2);
|
|
if (!i2ret)
|
|
return ret;
|
|
|
|
*iret = 1;
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_get_sdram_size(struct sisusb_usb_data *sisusb, int *iret,
|
|
int bw, int chab)
|
|
{
|
|
int ret = 0, i2ret = 0, i, j;
|
|
static const u8 sdramtype[13][5] = {
|
|
{ 2, 12, 9, 64, 0x35 },
|
|
{ 1, 13, 9, 64, 0x44 },
|
|
{ 2, 12, 8, 32, 0x31 },
|
|
{ 2, 11, 9, 32, 0x25 },
|
|
{ 1, 12, 9, 32, 0x34 },
|
|
{ 1, 13, 8, 32, 0x40 },
|
|
{ 2, 11, 8, 16, 0x21 },
|
|
{ 1, 12, 8, 16, 0x30 },
|
|
{ 1, 11, 9, 16, 0x24 },
|
|
{ 1, 11, 8, 8, 0x20 },
|
|
{ 2, 9, 8, 4, 0x01 },
|
|
{ 1, 10, 8, 4, 0x10 },
|
|
{ 1, 9, 8, 2, 0x00 }
|
|
};
|
|
|
|
*iret = 1; /* error */
|
|
|
|
for (i = 0; i < 13; i++) {
|
|
ret |= SETIREGANDOR(SISSR, 0x13, 0x80, sdramtype[i][4]);
|
|
for (j = 2; j > 0; j--) {
|
|
ret |= sisusb_set_rank(sisusb, &i2ret, i, j, chab,
|
|
sdramtype, bw);
|
|
if (!i2ret)
|
|
continue;
|
|
|
|
ret |= sisusb_check_ranks(sisusb, &i2ret, j, i, bw,
|
|
sdramtype);
|
|
if (i2ret) {
|
|
*iret = 0; /* ram size found */
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_setup_screen(struct sisusb_usb_data *sisusb,
|
|
int clrall, int drwfr)
|
|
{
|
|
int ret = 0;
|
|
u32 address;
|
|
int i, length, modex, modey, bpp;
|
|
|
|
modex = 640; modey = 480; bpp = 2;
|
|
|
|
address = sisusb->vrambase; /* Clear video ram */
|
|
|
|
if (clrall)
|
|
length = sisusb->vramsize;
|
|
else
|
|
length = modex * bpp * modey;
|
|
|
|
ret = sisusb_clear_vram(sisusb, address, length);
|
|
|
|
if (!ret && drwfr) {
|
|
for (i = 0; i < modex; i++) {
|
|
address = sisusb->vrambase + (i * bpp);
|
|
ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
address, 0xf100);
|
|
address += (modex * (modey-1) * bpp);
|
|
ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
address, 0xf100);
|
|
}
|
|
for (i = 0; i < modey; i++) {
|
|
address = sisusb->vrambase + ((i * modex) * bpp);
|
|
ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
address, 0xf100);
|
|
address += ((modex - 1) * bpp);
|
|
ret |= sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM,
|
|
address, 0xf100);
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_set_default_mode(struct sisusb_usb_data *sisusb,
|
|
int touchengines)
|
|
{
|
|
int ret = 0, i, j, modex, modey, bpp, du;
|
|
u8 sr31, cr63, tmp8;
|
|
static const char attrdata[] = {
|
|
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
|
|
0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
|
|
0x01, 0x00, 0x00, 0x00
|
|
};
|
|
static const char crtcrdata[] = {
|
|
0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e,
|
|
0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3,
|
|
0xff
|
|
};
|
|
static const char grcdata[] = {
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f,
|
|
0xff
|
|
};
|
|
static const char crtcdata[] = {
|
|
0x5f, 0x4f, 0x4f, 0x83, 0x55, 0x81, 0x0b, 0x3e,
|
|
0xe9, 0x8b, 0xdf, 0xe8, 0x0c, 0x00, 0x00, 0x05,
|
|
0x00
|
|
};
|
|
|
|
modex = 640; modey = 480; bpp = 2;
|
|
|
|
GETIREG(SISSR, 0x31, &sr31);
|
|
GETIREG(SISCR, 0x63, &cr63);
|
|
SETIREGOR(SISSR, 0x01, 0x20);
|
|
SETIREG(SISCR, 0x63, cr63 & 0xbf);
|
|
SETIREGOR(SISCR, 0x17, 0x80);
|
|
SETIREGOR(SISSR, 0x1f, 0x04);
|
|
SETIREGAND(SISSR, 0x07, 0xfb);
|
|
SETIREG(SISSR, 0x00, 0x03); /* seq */
|
|
SETIREG(SISSR, 0x01, 0x21);
|
|
SETIREG(SISSR, 0x02, 0x0f);
|
|
SETIREG(SISSR, 0x03, 0x00);
|
|
SETIREG(SISSR, 0x04, 0x0e);
|
|
SETREG(SISMISCW, 0x23); /* misc */
|
|
for (i = 0; i <= 0x18; i++) { /* crtc */
|
|
SETIREG(SISCR, i, crtcrdata[i]);
|
|
}
|
|
for (i = 0; i <= 0x13; i++) { /* att */
|
|
GETREG(SISINPSTAT, &tmp8);
|
|
SETREG(SISAR, i);
|
|
SETREG(SISAR, attrdata[i]);
|
|
}
|
|
GETREG(SISINPSTAT, &tmp8);
|
|
SETREG(SISAR, 0x14);
|
|
SETREG(SISAR, 0x00);
|
|
GETREG(SISINPSTAT, &tmp8);
|
|
SETREG(SISAR, 0x20);
|
|
GETREG(SISINPSTAT, &tmp8);
|
|
for (i = 0; i <= 0x08; i++) { /* grc */
|
|
SETIREG(SISGR, i, grcdata[i]);
|
|
}
|
|
SETIREGAND(SISGR, 0x05, 0xbf);
|
|
for (i = 0x0A; i <= 0x0E; i++) { /* clr ext */
|
|
SETIREG(SISSR, i, 0x00);
|
|
}
|
|
SETIREGAND(SISSR, 0x37, 0xfe);
|
|
SETREG(SISMISCW, 0xef); /* sync */
|
|
SETIREG(SISCR, 0x11, 0x00); /* crtc */
|
|
for (j = 0x00, i = 0; i <= 7; i++, j++)
|
|
SETIREG(SISCR, j, crtcdata[i]);
|
|
|
|
for (j = 0x10; i <= 10; i++, j++)
|
|
SETIREG(SISCR, j, crtcdata[i]);
|
|
|
|
for (j = 0x15; i <= 12; i++, j++)
|
|
SETIREG(SISCR, j, crtcdata[i]);
|
|
|
|
for (j = 0x0A; i <= 15; i++, j++)
|
|
SETIREG(SISSR, j, crtcdata[i]);
|
|
|
|
SETIREG(SISSR, 0x0E, (crtcdata[16] & 0xE0));
|
|
SETIREGANDOR(SISCR, 0x09, 0x5f, ((crtcdata[16] & 0x01) << 5));
|
|
SETIREG(SISCR, 0x14, 0x4f);
|
|
du = (modex / 16) * (bpp * 2); /* offset/pitch */
|
|
if (modex % 16)
|
|
du += bpp;
|
|
|
|
SETIREGANDOR(SISSR, 0x0e, 0xf0, ((du >> 8) & 0x0f));
|
|
SETIREG(SISCR, 0x13, (du & 0xff));
|
|
du <<= 5;
|
|
tmp8 = du >> 8;
|
|
if (du & 0xff)
|
|
tmp8++;
|
|
|
|
SETIREG(SISSR, 0x10, tmp8);
|
|
SETIREG(SISSR, 0x31, 0x00); /* VCLK */
|
|
SETIREG(SISSR, 0x2b, 0x1b);
|
|
SETIREG(SISSR, 0x2c, 0xe1);
|
|
SETIREG(SISSR, 0x2d, 0x01);
|
|
SETIREGAND(SISSR, 0x3d, 0xfe); /* FIFO */
|
|
SETIREG(SISSR, 0x08, 0xae);
|
|
SETIREGAND(SISSR, 0x09, 0xf0);
|
|
SETIREG(SISSR, 0x08, 0x34);
|
|
SETIREGOR(SISSR, 0x3d, 0x01);
|
|
SETIREGAND(SISSR, 0x1f, 0x3f); /* mode regs */
|
|
SETIREGANDOR(SISSR, 0x06, 0xc0, 0x0a);
|
|
SETIREG(SISCR, 0x19, 0x00);
|
|
SETIREGAND(SISCR, 0x1a, 0xfc);
|
|
SETIREGAND(SISSR, 0x0f, 0xb7);
|
|
SETIREGAND(SISSR, 0x31, 0xfb);
|
|
SETIREGANDOR(SISSR, 0x21, 0x1f, 0xa0);
|
|
SETIREGAND(SISSR, 0x32, 0xf3);
|
|
SETIREGANDOR(SISSR, 0x07, 0xf8, 0x03);
|
|
SETIREG(SISCR, 0x52, 0x6c);
|
|
|
|
SETIREG(SISCR, 0x0d, 0x00); /* adjust frame */
|
|
SETIREG(SISCR, 0x0c, 0x00);
|
|
SETIREG(SISSR, 0x0d, 0x00);
|
|
SETIREGAND(SISSR, 0x37, 0xfe);
|
|
|
|
SETIREG(SISCR, 0x32, 0x20);
|
|
SETIREGAND(SISSR, 0x01, 0xdf); /* enable display */
|
|
SETIREG(SISCR, 0x63, (cr63 & 0xbf));
|
|
SETIREG(SISSR, 0x31, (sr31 & 0xfb));
|
|
|
|
if (touchengines) {
|
|
SETIREG(SISSR, 0x20, 0xa1); /* enable engines */
|
|
SETIREGOR(SISSR, 0x1e, 0x5a);
|
|
|
|
SETIREG(SISSR, 0x26, 0x01); /* disable cmdqueue */
|
|
SETIREG(SISSR, 0x27, 0x1f);
|
|
SETIREG(SISSR, 0x26, 0x00);
|
|
}
|
|
|
|
SETIREG(SISCR, 0x34, 0x44); /* we just set std mode #44 */
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_init_gfxcore(struct sisusb_usb_data *sisusb)
|
|
{
|
|
int ret = 0, i, j, bw, chab, iret, retry = 3;
|
|
u8 tmp8, ramtype;
|
|
u32 tmp32;
|
|
static const char mclktable[] = {
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143
|
|
};
|
|
static const char eclktable[] = {
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143,
|
|
0x3b, 0x22, 0x01, 143
|
|
};
|
|
static const char ramtypetable1[] = {
|
|
0x00, 0x04, 0x60, 0x60,
|
|
0x0f, 0x0f, 0x1f, 0x1f,
|
|
0xba, 0xba, 0xba, 0xba,
|
|
0xa9, 0xa9, 0xac, 0xac,
|
|
0xa0, 0xa0, 0xa0, 0xa8,
|
|
0x00, 0x00, 0x02, 0x02,
|
|
0x30, 0x30, 0x40, 0x40
|
|
};
|
|
static const char ramtypetable2[] = {
|
|
0x77, 0x77, 0x44, 0x44,
|
|
0x77, 0x77, 0x44, 0x44,
|
|
0x00, 0x00, 0x00, 0x00,
|
|
0x5b, 0x5b, 0xab, 0xab,
|
|
0x00, 0x00, 0xf0, 0xf8
|
|
};
|
|
|
|
while (retry--) {
|
|
|
|
/* Enable VGA */
|
|
ret = GETREG(SISVGAEN, &tmp8);
|
|
ret |= SETREG(SISVGAEN, (tmp8 | 0x01));
|
|
|
|
/* Enable GPU access to VRAM */
|
|
ret |= GETREG(SISMISCR, &tmp8);
|
|
ret |= SETREG(SISMISCW, (tmp8 | 0x01));
|
|
|
|
if (ret)
|
|
continue;
|
|
|
|
/* Reset registers */
|
|
ret |= SETIREGAND(SISCR, 0x5b, 0xdf);
|
|
ret |= SETIREG(SISSR, 0x05, 0x86);
|
|
ret |= SETIREGOR(SISSR, 0x20, 0x01);
|
|
|
|
ret |= SETREG(SISMISCW, 0x67);
|
|
|
|
for (i = 0x06; i <= 0x1f; i++)
|
|
ret |= SETIREG(SISSR, i, 0x00);
|
|
|
|
for (i = 0x21; i <= 0x27; i++)
|
|
ret |= SETIREG(SISSR, i, 0x00);
|
|
|
|
for (i = 0x31; i <= 0x3d; i++)
|
|
ret |= SETIREG(SISSR, i, 0x00);
|
|
|
|
for (i = 0x12; i <= 0x1b; i++)
|
|
ret |= SETIREG(SISSR, i, 0x00);
|
|
|
|
for (i = 0x79; i <= 0x7c; i++)
|
|
ret |= SETIREG(SISCR, i, 0x00);
|
|
|
|
if (ret)
|
|
continue;
|
|
|
|
ret |= SETIREG(SISCR, 0x63, 0x80);
|
|
|
|
ret |= GETIREG(SISSR, 0x3a, &ramtype);
|
|
ramtype &= 0x03;
|
|
|
|
ret |= SETIREG(SISSR, 0x28, mclktable[ramtype * 4]);
|
|
ret |= SETIREG(SISSR, 0x29, mclktable[(ramtype * 4) + 1]);
|
|
ret |= SETIREG(SISSR, 0x2a, mclktable[(ramtype * 4) + 2]);
|
|
|
|
ret |= SETIREG(SISSR, 0x2e, eclktable[ramtype * 4]);
|
|
ret |= SETIREG(SISSR, 0x2f, eclktable[(ramtype * 4) + 1]);
|
|
ret |= SETIREG(SISSR, 0x30, eclktable[(ramtype * 4) + 2]);
|
|
|
|
ret |= SETIREG(SISSR, 0x07, 0x18);
|
|
ret |= SETIREG(SISSR, 0x11, 0x0f);
|
|
|
|
if (ret)
|
|
continue;
|
|
|
|
for (i = 0x15, j = 0; i <= 0x1b; i++, j++) {
|
|
ret |= SETIREG(SISSR, i,
|
|
ramtypetable1[(j*4) + ramtype]);
|
|
}
|
|
for (i = 0x40, j = 0; i <= 0x44; i++, j++) {
|
|
ret |= SETIREG(SISCR, i,
|
|
ramtypetable2[(j*4) + ramtype]);
|
|
}
|
|
|
|
ret |= SETIREG(SISCR, 0x49, 0xaa);
|
|
|
|
ret |= SETIREG(SISSR, 0x1f, 0x00);
|
|
ret |= SETIREG(SISSR, 0x20, 0xa0);
|
|
ret |= SETIREG(SISSR, 0x23, 0xf6);
|
|
ret |= SETIREG(SISSR, 0x24, 0x0d);
|
|
ret |= SETIREG(SISSR, 0x25, 0x33);
|
|
|
|
ret |= SETIREG(SISSR, 0x11, 0x0f);
|
|
|
|
ret |= SETIREGOR(SISPART1, 0x2f, 0x01);
|
|
|
|
ret |= SETIREGAND(SISCAP, 0x3f, 0xef);
|
|
|
|
if (ret)
|
|
continue;
|
|
|
|
ret |= SETIREG(SISPART1, 0x00, 0x00);
|
|
|
|
ret |= GETIREG(SISSR, 0x13, &tmp8);
|
|
tmp8 >>= 4;
|
|
|
|
ret |= SETIREG(SISPART1, 0x02, 0x00);
|
|
ret |= SETIREG(SISPART1, 0x2e, 0x08);
|
|
|
|
ret |= sisusb_read_pci_config(sisusb, 0x50, &tmp32);
|
|
tmp32 &= 0x00f00000;
|
|
tmp8 = (tmp32 == 0x100000) ? 0x33 : 0x03;
|
|
ret |= SETIREG(SISSR, 0x25, tmp8);
|
|
tmp8 = (tmp32 == 0x100000) ? 0xaa : 0x88;
|
|
ret |= SETIREG(SISCR, 0x49, tmp8);
|
|
|
|
ret |= SETIREG(SISSR, 0x27, 0x1f);
|
|
ret |= SETIREG(SISSR, 0x31, 0x00);
|
|
ret |= SETIREG(SISSR, 0x32, 0x11);
|
|
ret |= SETIREG(SISSR, 0x33, 0x00);
|
|
|
|
if (ret)
|
|
continue;
|
|
|
|
ret |= SETIREG(SISCR, 0x83, 0x00);
|
|
|
|
ret |= sisusb_set_default_mode(sisusb, 0);
|
|
|
|
ret |= SETIREGAND(SISSR, 0x21, 0xdf);
|
|
ret |= SETIREGOR(SISSR, 0x01, 0x20);
|
|
ret |= SETIREGOR(SISSR, 0x16, 0x0f);
|
|
|
|
ret |= sisusb_triggersr16(sisusb, ramtype);
|
|
|
|
/* Disable refresh */
|
|
ret |= SETIREGAND(SISSR, 0x17, 0xf8);
|
|
ret |= SETIREGOR(SISSR, 0x19, 0x03);
|
|
|
|
ret |= sisusb_getbuswidth(sisusb, &bw, &chab);
|
|
ret |= sisusb_verify_mclk(sisusb);
|
|
|
|
if (ramtype <= 1) {
|
|
ret |= sisusb_get_sdram_size(sisusb, &iret, bw, chab);
|
|
if (iret) {
|
|
dev_err(&sisusb->sisusb_dev->dev,
|
|
"RAM size detection failed, assuming 8MB video RAM\n");
|
|
ret |= SETIREG(SISSR, 0x14, 0x31);
|
|
/* TODO */
|
|
}
|
|
} else {
|
|
dev_err(&sisusb->sisusb_dev->dev,
|
|
"DDR RAM device found, assuming 8MB video RAM\n");
|
|
ret |= SETIREG(SISSR, 0x14, 0x31);
|
|
/* *** TODO *** */
|
|
}
|
|
|
|
/* Enable refresh */
|
|
ret |= SETIREG(SISSR, 0x16, ramtypetable1[4 + ramtype]);
|
|
ret |= SETIREG(SISSR, 0x17, ramtypetable1[8 + ramtype]);
|
|
ret |= SETIREG(SISSR, 0x19, ramtypetable1[16 + ramtype]);
|
|
|
|
ret |= SETIREGOR(SISSR, 0x21, 0x20);
|
|
|
|
ret |= SETIREG(SISSR, 0x22, 0xfb);
|
|
ret |= SETIREG(SISSR, 0x21, 0xa5);
|
|
|
|
if (ret == 0)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#undef SETREG
|
|
#undef GETREG
|
|
#undef SETIREG
|
|
#undef GETIREG
|
|
#undef SETIREGOR
|
|
#undef SETIREGAND
|
|
#undef SETIREGANDOR
|
|
#undef READL
|
|
#undef WRITEL
|
|
|
|
static void sisusb_get_ramconfig(struct sisusb_usb_data *sisusb)
|
|
{
|
|
u8 tmp8, tmp82, ramtype;
|
|
int bw = 0;
|
|
char *ramtypetext1 = NULL;
|
|
static const char ram_datarate[4] = {'S', 'S', 'D', 'D'};
|
|
static const char ram_dynamictype[4] = {'D', 'G', 'D', 'G'};
|
|
static const int busSDR[4] = {64, 64, 128, 128};
|
|
static const int busDDR[4] = {32, 32, 64, 64};
|
|
static const int busDDRA[4] = {64+32, 64+32, (64+32)*2, (64+32)*2};
|
|
|
|
sisusb_getidxreg(sisusb, SISSR, 0x14, &tmp8);
|
|
sisusb_getidxreg(sisusb, SISSR, 0x15, &tmp82);
|
|
sisusb_getidxreg(sisusb, SISSR, 0x3a, &ramtype);
|
|
sisusb->vramsize = (1 << ((tmp8 & 0xf0) >> 4)) * 1024 * 1024;
|
|
ramtype &= 0x03;
|
|
switch ((tmp8 >> 2) & 0x03) {
|
|
case 0:
|
|
ramtypetext1 = "1 ch/1 r";
|
|
if (tmp82 & 0x10)
|
|
bw = 32;
|
|
else
|
|
bw = busSDR[(tmp8 & 0x03)];
|
|
|
|
break;
|
|
case 1:
|
|
ramtypetext1 = "1 ch/2 r";
|
|
sisusb->vramsize <<= 1;
|
|
bw = busSDR[(tmp8 & 0x03)];
|
|
break;
|
|
case 2:
|
|
ramtypetext1 = "asymmeric";
|
|
sisusb->vramsize += sisusb->vramsize/2;
|
|
bw = busDDRA[(tmp8 & 0x03)];
|
|
break;
|
|
case 3:
|
|
ramtypetext1 = "2 channel";
|
|
sisusb->vramsize <<= 1;
|
|
bw = busDDR[(tmp8 & 0x03)];
|
|
break;
|
|
}
|
|
|
|
dev_info(&sisusb->sisusb_dev->dev,
|
|
"%dMB %s %cDR S%cRAM, bus width %d\n",
|
|
sisusb->vramsize >> 20, ramtypetext1,
|
|
ram_datarate[ramtype], ram_dynamictype[ramtype], bw);
|
|
}
|
|
|
|
static int sisusb_do_init_gfxdevice(struct sisusb_usb_data *sisusb)
|
|
{
|
|
struct sisusb_packet packet;
|
|
int ret;
|
|
u32 tmp32;
|
|
|
|
/* Do some magic */
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000324;
|
|
packet.data = 0x00000004;
|
|
ret = sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000364;
|
|
packet.data = 0x00000004;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000384;
|
|
packet.data = 0x00000004;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000100;
|
|
packet.data = 0x00000700;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
|
|
packet.header = 0x000f;
|
|
packet.address = 0x00000004;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 6, &packet, 0);
|
|
packet.data |= 0x17;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
|
|
/* Init BAR 0 (VRAM) */
|
|
ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32);
|
|
ret |= sisusb_write_pci_config(sisusb, 0x10, 0xfffffff0);
|
|
ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32);
|
|
tmp32 &= 0x0f;
|
|
tmp32 |= SISUSB_PCI_MEMBASE;
|
|
ret |= sisusb_write_pci_config(sisusb, 0x10, tmp32);
|
|
|
|
/* Init BAR 1 (MMIO) */
|
|
ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32);
|
|
ret |= sisusb_write_pci_config(sisusb, 0x14, 0xfffffff0);
|
|
ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32);
|
|
tmp32 &= 0x0f;
|
|
tmp32 |= SISUSB_PCI_MMIOBASE;
|
|
ret |= sisusb_write_pci_config(sisusb, 0x14, tmp32);
|
|
|
|
/* Init BAR 2 (i/o ports) */
|
|
ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32);
|
|
ret |= sisusb_write_pci_config(sisusb, 0x18, 0xfffffff0);
|
|
ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32);
|
|
tmp32 &= 0x0f;
|
|
tmp32 |= SISUSB_PCI_IOPORTBASE;
|
|
ret |= sisusb_write_pci_config(sisusb, 0x18, tmp32);
|
|
|
|
/* Enable memory and i/o access */
|
|
ret |= sisusb_read_pci_config(sisusb, 0x04, &tmp32);
|
|
tmp32 |= 0x3;
|
|
ret |= sisusb_write_pci_config(sisusb, 0x04, tmp32);
|
|
|
|
if (ret == 0) {
|
|
/* Some further magic */
|
|
packet.header = 0x001f;
|
|
packet.address = 0x00000050;
|
|
packet.data = 0x000000ff;
|
|
ret |= sisusb_send_bridge_packet(sisusb, 10, &packet, 0);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Initialize the graphics device (return 0 on success)
|
|
* This initializes the net2280 as well as the PCI registers
|
|
* of the graphics board.
|
|
*/
|
|
|
|
static int sisusb_init_gfxdevice(struct sisusb_usb_data *sisusb, int initscreen)
|
|
{
|
|
int ret = 0, test = 0;
|
|
u32 tmp32;
|
|
|
|
if (sisusb->devinit == 1) {
|
|
/* Read PCI BARs and see if they have been set up */
|
|
ret |= sisusb_read_pci_config(sisusb, 0x10, &tmp32);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if ((tmp32 & 0xfffffff0) == SISUSB_PCI_MEMBASE)
|
|
test++;
|
|
|
|
ret |= sisusb_read_pci_config(sisusb, 0x14, &tmp32);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if ((tmp32 & 0xfffffff0) == SISUSB_PCI_MMIOBASE)
|
|
test++;
|
|
|
|
ret |= sisusb_read_pci_config(sisusb, 0x18, &tmp32);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if ((tmp32 & 0xfffffff0) == SISUSB_PCI_IOPORTBASE)
|
|
test++;
|
|
}
|
|
|
|
/* No? So reset the device */
|
|
if ((sisusb->devinit == 0) || (test != 3)) {
|
|
|
|
ret |= sisusb_do_init_gfxdevice(sisusb);
|
|
|
|
if (ret == 0)
|
|
sisusb->devinit = 1;
|
|
|
|
}
|
|
|
|
if (sisusb->devinit) {
|
|
/* Initialize the graphics core */
|
|
if (sisusb_init_gfxcore(sisusb) == 0) {
|
|
sisusb->gfxinit = 1;
|
|
sisusb_get_ramconfig(sisusb);
|
|
ret |= sisusb_set_default_mode(sisusb, 1);
|
|
ret |= sisusb_setup_screen(sisusb, 1, initscreen);
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
|
|
/* Set up default text mode:
|
|
* - Set text mode (0x03)
|
|
* - Upload default font
|
|
* - Upload user font (if available)
|
|
*/
|
|
|
|
int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init)
|
|
{
|
|
int ret = 0, slot = sisusb->font_slot, i;
|
|
const struct font_desc *myfont;
|
|
u8 *tempbuf;
|
|
u16 *tempbufb;
|
|
static const char bootstring[] =
|
|
"SiSUSB VGA text console, (C) 2005 Thomas Winischhofer.";
|
|
static const char bootlogo[] = "(o_ //\\ V_/_";
|
|
|
|
/* sisusb->lock is down */
|
|
|
|
if (!sisusb->SiS_Pr)
|
|
return 1;
|
|
|
|
sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
|
|
sisusb->SiS_Pr->sisusb = (void *)sisusb;
|
|
|
|
/* Set mode 0x03 */
|
|
SiSUSBSetMode(sisusb->SiS_Pr, 0x03);
|
|
|
|
myfont = find_font("VGA8x16");
|
|
if (!myfont)
|
|
return 1;
|
|
|
|
tempbuf = vmalloc(8192);
|
|
if (!tempbuf)
|
|
return 1;
|
|
|
|
for (i = 0; i < 256; i++)
|
|
memcpy(tempbuf + (i * 32), myfont->data + (i * 16), 16);
|
|
|
|
/* Upload default font */
|
|
ret = sisusbcon_do_font_op(sisusb, 1, 0, tempbuf, 8192,
|
|
0, 1, NULL, 16, 0);
|
|
|
|
vfree(tempbuf);
|
|
|
|
/* Upload user font (and reset current slot) */
|
|
if (sisusb->font_backup) {
|
|
ret |= sisusbcon_do_font_op(sisusb, 1, 2, sisusb->font_backup,
|
|
8192, sisusb->font_backup_512, 1, NULL,
|
|
sisusb->font_backup_height, 0);
|
|
if (slot != 2)
|
|
sisusbcon_do_font_op(sisusb, 1, 0, NULL, 0, 0, 1,
|
|
NULL, 16, 0);
|
|
}
|
|
|
|
if (init && !sisusb->scrbuf) {
|
|
|
|
tempbuf = vmalloc(8192);
|
|
if (tempbuf) {
|
|
|
|
i = 4096;
|
|
tempbufb = (u16 *)tempbuf;
|
|
while (i--)
|
|
*(tempbufb++) = 0x0720;
|
|
|
|
i = 0;
|
|
tempbufb = (u16 *)tempbuf;
|
|
while (bootlogo[i]) {
|
|
*(tempbufb++) = 0x0700 | bootlogo[i++];
|
|
if (!(i % 4))
|
|
tempbufb += 76;
|
|
}
|
|
|
|
i = 0;
|
|
tempbufb = (u16 *)tempbuf + 6;
|
|
while (bootstring[i])
|
|
*(tempbufb++) = 0x0700 | bootstring[i++];
|
|
|
|
ret |= sisusb_copy_memory(sisusb, tempbuf,
|
|
sisusb->vrambase, 8192);
|
|
|
|
vfree(tempbuf);
|
|
|
|
}
|
|
|
|
} else if (sisusb->scrbuf) {
|
|
ret |= sisusb_copy_memory(sisusb, (char *)sisusb->scrbuf,
|
|
sisusb->vrambase, sisusb->scrbuf_size);
|
|
}
|
|
|
|
if (sisusb->sisusb_cursor_size_from >= 0 &&
|
|
sisusb->sisusb_cursor_size_to >= 0) {
|
|
sisusb_setidxreg(sisusb, SISCR, 0x0a,
|
|
sisusb->sisusb_cursor_size_from);
|
|
sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0,
|
|
sisusb->sisusb_cursor_size_to);
|
|
} else {
|
|
sisusb_setidxreg(sisusb, SISCR, 0x0a, 0x2d);
|
|
sisusb_setidxreg(sisusb, SISCR, 0x0b, 0x0e);
|
|
sisusb->sisusb_cursor_size_to = -1;
|
|
}
|
|
|
|
slot = sisusb->sisusb_cursor_loc;
|
|
if (slot < 0)
|
|
slot = 0;
|
|
|
|
sisusb->sisusb_cursor_loc = -1;
|
|
sisusb->bad_cursor_pos = 1;
|
|
|
|
sisusb_set_cursor(sisusb, slot);
|
|
|
|
sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8));
|
|
sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff));
|
|
|
|
sisusb->textmodedestroyed = 0;
|
|
|
|
/* sisusb->lock is down */
|
|
|
|
return ret;
|
|
}
|
|
|
|
#endif
|
|
|
|
/* fops */
|
|
|
|
static int sisusb_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
struct usb_interface *interface;
|
|
int subminor = iminor(inode);
|
|
|
|
interface = usb_find_interface(&sisusb_driver, subminor);
|
|
if (!interface)
|
|
return -ENODEV;
|
|
|
|
sisusb = usb_get_intfdata(interface);
|
|
if (!sisusb)
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
if (!sisusb->present || !sisusb->ready) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (sisusb->isopen) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (!sisusb->devinit) {
|
|
if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH ||
|
|
sisusb->sisusb_dev->speed >= USB_SPEED_SUPER) {
|
|
if (sisusb_init_gfxdevice(sisusb, 0)) {
|
|
mutex_unlock(&sisusb->lock);
|
|
dev_err(&sisusb->sisusb_dev->dev,
|
|
"Failed to initialize device\n");
|
|
return -EIO;
|
|
}
|
|
} else {
|
|
mutex_unlock(&sisusb->lock);
|
|
dev_err(&sisusb->sisusb_dev->dev,
|
|
"Device not attached to USB 2.0 hub\n");
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/* Increment usage count for our sisusb */
|
|
kref_get(&sisusb->kref);
|
|
|
|
sisusb->isopen = 1;
|
|
|
|
file->private_data = sisusb;
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void sisusb_delete(struct kref *kref)
|
|
{
|
|
struct sisusb_usb_data *sisusb = to_sisusb_dev(kref);
|
|
|
|
if (!sisusb)
|
|
return;
|
|
|
|
usb_put_dev(sisusb->sisusb_dev);
|
|
|
|
sisusb->sisusb_dev = NULL;
|
|
sisusb_free_buffers(sisusb);
|
|
sisusb_free_urbs(sisusb);
|
|
#ifdef INCL_SISUSB_CON
|
|
kfree(sisusb->SiS_Pr);
|
|
#endif
|
|
kfree(sisusb);
|
|
}
|
|
|
|
static int sisusb_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
|
|
sisusb = file->private_data;
|
|
if (!sisusb)
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
if (sisusb->present) {
|
|
/* Wait for all URBs to finish if device still present */
|
|
if (!sisusb_wait_all_out_complete(sisusb))
|
|
sisusb_kill_all_busy(sisusb);
|
|
}
|
|
|
|
sisusb->isopen = 0;
|
|
file->private_data = NULL;
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
|
|
/* decrement the usage count on our device */
|
|
kref_put(&sisusb->kref, sisusb_delete);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t sisusb_read(struct file *file, char __user *buffer,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
ssize_t bytes_read = 0;
|
|
int errno = 0;
|
|
u8 buf8;
|
|
u16 buf16;
|
|
u32 buf32, address;
|
|
|
|
sisusb = file->private_data;
|
|
if (!sisusb)
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
/* Sanity check */
|
|
if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if ((*ppos) >= SISUSB_PCI_PSEUDO_IOPORTBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_IOPORTBASE + 128) {
|
|
|
|
address = (*ppos) - SISUSB_PCI_PSEUDO_IOPORTBASE +
|
|
SISUSB_PCI_IOPORTBASE;
|
|
|
|
/* Read i/o ports
|
|
* Byte, word and long(32) can be read. As this
|
|
* emulates inX instructions, the data returned is
|
|
* in machine-endianness.
|
|
*/
|
|
switch (count) {
|
|
case 1:
|
|
if (sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO,
|
|
address, &buf8))
|
|
errno = -EIO;
|
|
else if (put_user(buf8, (u8 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else
|
|
bytes_read = 1;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
if (sisusb_read_memio_word(sisusb, SISUSB_TYPE_IO,
|
|
address, &buf16))
|
|
errno = -EIO;
|
|
else if (put_user(buf16, (u16 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else
|
|
bytes_read = 2;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
if (sisusb_read_memio_long(sisusb, SISUSB_TYPE_IO,
|
|
address, &buf32))
|
|
errno = -EIO;
|
|
else if (put_user(buf32, (u32 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else
|
|
bytes_read = 4;
|
|
|
|
break;
|
|
|
|
default:
|
|
errno = -EIO;
|
|
|
|
}
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_MEMBASE && (*ppos) <
|
|
SISUSB_PCI_PSEUDO_MEMBASE + sisusb->vramsize) {
|
|
|
|
address = (*ppos) - SISUSB_PCI_PSEUDO_MEMBASE +
|
|
SISUSB_PCI_MEMBASE;
|
|
|
|
/* Read video ram
|
|
* Remember: Data delivered is never endian-corrected
|
|
*/
|
|
errno = sisusb_read_mem_bulk(sisusb, address,
|
|
NULL, count, buffer, &bytes_read);
|
|
|
|
if (bytes_read)
|
|
errno = bytes_read;
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_MMIOBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_MMIOBASE +
|
|
SISUSB_PCI_MMIOSIZE) {
|
|
|
|
address = (*ppos) - SISUSB_PCI_PSEUDO_MMIOBASE +
|
|
SISUSB_PCI_MMIOBASE;
|
|
|
|
/* Read MMIO
|
|
* Remember: Data delivered is never endian-corrected
|
|
*/
|
|
errno = sisusb_read_mem_bulk(sisusb, address,
|
|
NULL, count, buffer, &bytes_read);
|
|
|
|
if (bytes_read)
|
|
errno = bytes_read;
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_PCIBASE &&
|
|
(*ppos) <= SISUSB_PCI_PSEUDO_PCIBASE + 0x5c) {
|
|
|
|
if (count != 4) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
address = (*ppos) - SISUSB_PCI_PSEUDO_PCIBASE;
|
|
|
|
/* Read PCI config register
|
|
* Return value delivered in machine endianness.
|
|
*/
|
|
if (sisusb_read_pci_config(sisusb, address, &buf32))
|
|
errno = -EIO;
|
|
else if (put_user(buf32, (u32 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else
|
|
bytes_read = 4;
|
|
|
|
} else {
|
|
|
|
errno = -EBADFD;
|
|
|
|
}
|
|
|
|
(*ppos) += bytes_read;
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
|
|
return errno ? errno : bytes_read;
|
|
}
|
|
|
|
static ssize_t sisusb_write(struct file *file, const char __user *buffer,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
int errno = 0;
|
|
ssize_t bytes_written = 0;
|
|
u8 buf8;
|
|
u16 buf16;
|
|
u32 buf32, address;
|
|
|
|
sisusb = file->private_data;
|
|
if (!sisusb)
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
/* Sanity check */
|
|
if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if ((*ppos) >= SISUSB_PCI_PSEUDO_IOPORTBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_IOPORTBASE + 128) {
|
|
|
|
address = (*ppos) - SISUSB_PCI_PSEUDO_IOPORTBASE +
|
|
SISUSB_PCI_IOPORTBASE;
|
|
|
|
/* Write i/o ports
|
|
* Byte, word and long(32) can be written. As this
|
|
* emulates outX instructions, the data is expected
|
|
* in machine-endianness.
|
|
*/
|
|
switch (count) {
|
|
case 1:
|
|
if (get_user(buf8, (u8 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else if (sisusb_write_memio_byte(sisusb,
|
|
SISUSB_TYPE_IO, address, buf8))
|
|
errno = -EIO;
|
|
else
|
|
bytes_written = 1;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
if (get_user(buf16, (u16 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else if (sisusb_write_memio_word(sisusb,
|
|
SISUSB_TYPE_IO, address, buf16))
|
|
errno = -EIO;
|
|
else
|
|
bytes_written = 2;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
if (get_user(buf32, (u32 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else if (sisusb_write_memio_long(sisusb,
|
|
SISUSB_TYPE_IO, address, buf32))
|
|
errno = -EIO;
|
|
else
|
|
bytes_written = 4;
|
|
|
|
break;
|
|
|
|
default:
|
|
errno = -EIO;
|
|
}
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_MEMBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_MEMBASE +
|
|
sisusb->vramsize) {
|
|
|
|
address = (*ppos) - SISUSB_PCI_PSEUDO_MEMBASE +
|
|
SISUSB_PCI_MEMBASE;
|
|
|
|
/* Write video ram.
|
|
* Buffer is copied 1:1, therefore, on big-endian
|
|
* machines, the data must be swapped by userland
|
|
* in advance (if applicable; no swapping in 8bpp
|
|
* mode or if YUV data is being transferred).
|
|
*/
|
|
errno = sisusb_write_mem_bulk(sisusb, address, NULL,
|
|
count, buffer, 0, &bytes_written);
|
|
|
|
if (bytes_written)
|
|
errno = bytes_written;
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_MMIOBASE &&
|
|
(*ppos) < SISUSB_PCI_PSEUDO_MMIOBASE +
|
|
SISUSB_PCI_MMIOSIZE) {
|
|
|
|
address = (*ppos) - SISUSB_PCI_PSEUDO_MMIOBASE +
|
|
SISUSB_PCI_MMIOBASE;
|
|
|
|
/* Write MMIO.
|
|
* Buffer is copied 1:1, therefore, on big-endian
|
|
* machines, the data must be swapped by userland
|
|
* in advance.
|
|
*/
|
|
errno = sisusb_write_mem_bulk(sisusb, address, NULL,
|
|
count, buffer, 0, &bytes_written);
|
|
|
|
if (bytes_written)
|
|
errno = bytes_written;
|
|
|
|
} else if ((*ppos) >= SISUSB_PCI_PSEUDO_PCIBASE &&
|
|
(*ppos) <= SISUSB_PCI_PSEUDO_PCIBASE +
|
|
SISUSB_PCI_PCONFSIZE) {
|
|
|
|
if (count != 4) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
address = (*ppos) - SISUSB_PCI_PSEUDO_PCIBASE;
|
|
|
|
/* Write PCI config register.
|
|
* Given value expected in machine endianness.
|
|
*/
|
|
if (get_user(buf32, (u32 __user *)buffer))
|
|
errno = -EFAULT;
|
|
else if (sisusb_write_pci_config(sisusb, address, buf32))
|
|
errno = -EIO;
|
|
else
|
|
bytes_written = 4;
|
|
|
|
|
|
} else {
|
|
|
|
/* Error */
|
|
errno = -EBADFD;
|
|
|
|
}
|
|
|
|
(*ppos) += bytes_written;
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
|
|
return errno ? errno : bytes_written;
|
|
}
|
|
|
|
static loff_t sisusb_lseek(struct file *file, loff_t offset, int orig)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
loff_t ret;
|
|
|
|
sisusb = file->private_data;
|
|
if (!sisusb)
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
/* Sanity check */
|
|
if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
|
|
mutex_unlock(&sisusb->lock);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = no_seek_end_llseek(file, offset, orig);
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int sisusb_handle_command(struct sisusb_usb_data *sisusb,
|
|
struct sisusb_command *y, unsigned long arg)
|
|
{
|
|
int retval, port, length;
|
|
u32 address;
|
|
|
|
/* All our commands require the device
|
|
* to be initialized.
|
|
*/
|
|
if (!sisusb->devinit)
|
|
return -ENODEV;
|
|
|
|
port = y->data3 -
|
|
SISUSB_PCI_PSEUDO_IOPORTBASE +
|
|
SISUSB_PCI_IOPORTBASE;
|
|
|
|
switch (y->operation) {
|
|
case SUCMD_GET:
|
|
retval = sisusb_getidxreg(sisusb, port, y->data0, &y->data1);
|
|
if (!retval) {
|
|
if (copy_to_user((void __user *)arg, y, sizeof(*y)))
|
|
retval = -EFAULT;
|
|
}
|
|
break;
|
|
|
|
case SUCMD_SET:
|
|
retval = sisusb_setidxreg(sisusb, port, y->data0, y->data1);
|
|
break;
|
|
|
|
case SUCMD_SETOR:
|
|
retval = sisusb_setidxregor(sisusb, port, y->data0, y->data1);
|
|
break;
|
|
|
|
case SUCMD_SETAND:
|
|
retval = sisusb_setidxregand(sisusb, port, y->data0, y->data1);
|
|
break;
|
|
|
|
case SUCMD_SETANDOR:
|
|
retval = sisusb_setidxregandor(sisusb, port, y->data0,
|
|
y->data1, y->data2);
|
|
break;
|
|
|
|
case SUCMD_SETMASK:
|
|
retval = sisusb_setidxregmask(sisusb, port, y->data0,
|
|
y->data1, y->data2);
|
|
break;
|
|
|
|
case SUCMD_CLRSCR:
|
|
/* Gfx core must be initialized */
|
|
if (!sisusb->gfxinit)
|
|
return -ENODEV;
|
|
|
|
length = (y->data0 << 16) | (y->data1 << 8) | y->data2;
|
|
address = y->data3 - SISUSB_PCI_PSEUDO_MEMBASE +
|
|
SISUSB_PCI_MEMBASE;
|
|
retval = sisusb_clear_vram(sisusb, address, length);
|
|
break;
|
|
|
|
case SUCMD_HANDLETEXTMODE:
|
|
retval = 0;
|
|
#ifdef INCL_SISUSB_CON
|
|
/* Gfx core must be initialized, SiS_Pr must exist */
|
|
if (!sisusb->gfxinit || !sisusb->SiS_Pr)
|
|
return -ENODEV;
|
|
|
|
switch (y->data0) {
|
|
case 0:
|
|
retval = sisusb_reset_text_mode(sisusb, 0);
|
|
break;
|
|
case 1:
|
|
sisusb->textmodedestroyed = 1;
|
|
break;
|
|
}
|
|
#endif
|
|
break;
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
case SUCMD_SETMODE:
|
|
/* Gfx core must be initialized, SiS_Pr must exist */
|
|
if (!sisusb->gfxinit || !sisusb->SiS_Pr)
|
|
return -ENODEV;
|
|
|
|
retval = 0;
|
|
|
|
sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
|
|
sisusb->SiS_Pr->sisusb = (void *)sisusb;
|
|
|
|
if (SiSUSBSetMode(sisusb->SiS_Pr, y->data3))
|
|
retval = -EINVAL;
|
|
|
|
break;
|
|
|
|
case SUCMD_SETVESAMODE:
|
|
/* Gfx core must be initialized, SiS_Pr must exist */
|
|
if (!sisusb->gfxinit || !sisusb->SiS_Pr)
|
|
return -ENODEV;
|
|
|
|
retval = 0;
|
|
|
|
sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30;
|
|
sisusb->SiS_Pr->sisusb = (void *)sisusb;
|
|
|
|
if (SiSUSBSetVESAMode(sisusb->SiS_Pr, y->data3))
|
|
retval = -EINVAL;
|
|
|
|
break;
|
|
#endif
|
|
|
|
default:
|
|
retval = -EINVAL;
|
|
}
|
|
|
|
if (retval > 0)
|
|
retval = -EIO;
|
|
|
|
return retval;
|
|
}
|
|
|
|
static long sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
struct sisusb_info x;
|
|
struct sisusb_command y;
|
|
long retval = 0;
|
|
u32 __user *argp = (u32 __user *)arg;
|
|
|
|
sisusb = file->private_data;
|
|
if (!sisusb)
|
|
return -ENODEV;
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
/* Sanity check */
|
|
if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) {
|
|
retval = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case SISUSB_GET_CONFIG_SIZE:
|
|
|
|
if (put_user(sizeof(x), argp))
|
|
retval = -EFAULT;
|
|
|
|
break;
|
|
|
|
case SISUSB_GET_CONFIG:
|
|
|
|
x.sisusb_id = SISUSB_ID;
|
|
x.sisusb_version = SISUSB_VERSION;
|
|
x.sisusb_revision = SISUSB_REVISION;
|
|
x.sisusb_patchlevel = SISUSB_PATCHLEVEL;
|
|
x.sisusb_gfxinit = sisusb->gfxinit;
|
|
x.sisusb_vrambase = SISUSB_PCI_PSEUDO_MEMBASE;
|
|
x.sisusb_mmiobase = SISUSB_PCI_PSEUDO_MMIOBASE;
|
|
x.sisusb_iobase = SISUSB_PCI_PSEUDO_IOPORTBASE;
|
|
x.sisusb_pcibase = SISUSB_PCI_PSEUDO_PCIBASE;
|
|
x.sisusb_vramsize = sisusb->vramsize;
|
|
x.sisusb_minor = sisusb->minor;
|
|
x.sisusb_fbdevactive = 0;
|
|
#ifdef INCL_SISUSB_CON
|
|
x.sisusb_conactive = sisusb->haveconsole ? 1 : 0;
|
|
#else
|
|
x.sisusb_conactive = 0;
|
|
#endif
|
|
memset(x.sisusb_reserved, 0, sizeof(x.sisusb_reserved));
|
|
|
|
if (copy_to_user((void __user *)arg, &x, sizeof(x)))
|
|
retval = -EFAULT;
|
|
|
|
break;
|
|
|
|
case SISUSB_COMMAND:
|
|
|
|
if (copy_from_user(&y, (void __user *)arg, sizeof(y)))
|
|
retval = -EFAULT;
|
|
else
|
|
retval = sisusb_handle_command(sisusb, &y, arg);
|
|
|
|
break;
|
|
|
|
default:
|
|
retval = -ENOTTY;
|
|
break;
|
|
}
|
|
|
|
err_out:
|
|
mutex_unlock(&sisusb->lock);
|
|
return retval;
|
|
}
|
|
|
|
#ifdef SISUSB_NEW_CONFIG_COMPAT
|
|
static long sisusb_compat_ioctl(struct file *f, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
long retval;
|
|
|
|
switch (cmd) {
|
|
case SISUSB_GET_CONFIG_SIZE:
|
|
case SISUSB_GET_CONFIG:
|
|
case SISUSB_COMMAND:
|
|
retval = sisusb_ioctl(f, cmd, arg);
|
|
return retval;
|
|
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static const struct file_operations usb_sisusb_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = sisusb_open,
|
|
.release = sisusb_release,
|
|
.read = sisusb_read,
|
|
.write = sisusb_write,
|
|
.llseek = sisusb_lseek,
|
|
#ifdef SISUSB_NEW_CONFIG_COMPAT
|
|
.compat_ioctl = sisusb_compat_ioctl,
|
|
#endif
|
|
.unlocked_ioctl = sisusb_ioctl
|
|
};
|
|
|
|
static struct usb_class_driver usb_sisusb_class = {
|
|
.name = "sisusbvga%d",
|
|
.fops = &usb_sisusb_fops,
|
|
.minor_base = SISUSB_MINOR
|
|
};
|
|
|
|
static int sisusb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *dev = interface_to_usbdev(intf);
|
|
struct sisusb_usb_data *sisusb;
|
|
int retval = 0, i;
|
|
|
|
dev_info(&dev->dev, "USB2VGA dongle found at address %d\n",
|
|
dev->devnum);
|
|
|
|
/* Allocate memory for our private */
|
|
sisusb = kzalloc(sizeof(*sisusb), GFP_KERNEL);
|
|
if (!sisusb)
|
|
return -ENOMEM;
|
|
|
|
kref_init(&sisusb->kref);
|
|
|
|
mutex_init(&(sisusb->lock));
|
|
|
|
/* Register device */
|
|
retval = usb_register_dev(intf, &usb_sisusb_class);
|
|
if (retval) {
|
|
dev_err(&sisusb->sisusb_dev->dev,
|
|
"Failed to get a minor for device %d\n",
|
|
dev->devnum);
|
|
retval = -ENODEV;
|
|
goto error_1;
|
|
}
|
|
|
|
sisusb->sisusb_dev = dev;
|
|
sisusb->minor = intf->minor;
|
|
sisusb->vrambase = SISUSB_PCI_MEMBASE;
|
|
sisusb->mmiobase = SISUSB_PCI_MMIOBASE;
|
|
sisusb->mmiosize = SISUSB_PCI_MMIOSIZE;
|
|
sisusb->ioportbase = SISUSB_PCI_IOPORTBASE;
|
|
/* Everything else is zero */
|
|
|
|
/* Allocate buffers */
|
|
sisusb->ibufsize = SISUSB_IBUF_SIZE;
|
|
sisusb->ibuf = kmalloc(SISUSB_IBUF_SIZE, GFP_KERNEL);
|
|
if (!sisusb->ibuf) {
|
|
retval = -ENOMEM;
|
|
goto error_2;
|
|
}
|
|
|
|
sisusb->numobufs = 0;
|
|
sisusb->obufsize = SISUSB_OBUF_SIZE;
|
|
for (i = 0; i < NUMOBUFS; i++) {
|
|
sisusb->obuf[i] = kmalloc(SISUSB_OBUF_SIZE, GFP_KERNEL);
|
|
if (!sisusb->obuf[i]) {
|
|
if (i == 0) {
|
|
retval = -ENOMEM;
|
|
goto error_3;
|
|
}
|
|
break;
|
|
}
|
|
sisusb->numobufs++;
|
|
}
|
|
|
|
/* Allocate URBs */
|
|
sisusb->sisurbin = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!sisusb->sisurbin) {
|
|
retval = -ENOMEM;
|
|
goto error_3;
|
|
}
|
|
sisusb->completein = 1;
|
|
|
|
for (i = 0; i < sisusb->numobufs; i++) {
|
|
sisusb->sisurbout[i] = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!sisusb->sisurbout[i]) {
|
|
retval = -ENOMEM;
|
|
goto error_4;
|
|
}
|
|
sisusb->urbout_context[i].sisusb = (void *)sisusb;
|
|
sisusb->urbout_context[i].urbindex = i;
|
|
sisusb->urbstatus[i] = 0;
|
|
}
|
|
|
|
dev_info(&sisusb->sisusb_dev->dev, "Allocated %d output buffers\n",
|
|
sisusb->numobufs);
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
/* Allocate our SiS_Pr */
|
|
sisusb->SiS_Pr = kmalloc(sizeof(struct SiS_Private), GFP_KERNEL);
|
|
if (!sisusb->SiS_Pr) {
|
|
retval = -ENOMEM;
|
|
goto error_4;
|
|
}
|
|
#endif
|
|
|
|
/* Do remaining init stuff */
|
|
|
|
init_waitqueue_head(&sisusb->wait_q);
|
|
|
|
usb_set_intfdata(intf, sisusb);
|
|
|
|
usb_get_dev(sisusb->sisusb_dev);
|
|
|
|
sisusb->present = 1;
|
|
|
|
if (dev->speed == USB_SPEED_HIGH || dev->speed >= USB_SPEED_SUPER) {
|
|
int initscreen = 1;
|
|
#ifdef INCL_SISUSB_CON
|
|
if (sisusb_first_vc > 0 && sisusb_last_vc > 0 &&
|
|
sisusb_first_vc <= sisusb_last_vc &&
|
|
sisusb_last_vc <= MAX_NR_CONSOLES)
|
|
initscreen = 0;
|
|
#endif
|
|
if (sisusb_init_gfxdevice(sisusb, initscreen))
|
|
dev_err(&sisusb->sisusb_dev->dev,
|
|
"Failed to early initialize device\n");
|
|
|
|
} else
|
|
dev_info(&sisusb->sisusb_dev->dev,
|
|
"Not attached to USB 2.0 hub, deferring init\n");
|
|
|
|
sisusb->ready = 1;
|
|
|
|
#ifdef SISUSBENDIANTEST
|
|
dev_dbg(&sisusb->sisusb_dev->dev, "*** RWTEST ***\n");
|
|
sisusb_testreadwrite(sisusb);
|
|
dev_dbg(&sisusb->sisusb_dev->dev, "*** RWTEST END ***\n");
|
|
#endif
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
sisusb_console_init(sisusb, sisusb_first_vc, sisusb_last_vc);
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
error_4:
|
|
sisusb_free_urbs(sisusb);
|
|
error_3:
|
|
sisusb_free_buffers(sisusb);
|
|
error_2:
|
|
usb_deregister_dev(intf, &usb_sisusb_class);
|
|
error_1:
|
|
kfree(sisusb);
|
|
return retval;
|
|
}
|
|
|
|
static void sisusb_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct sisusb_usb_data *sisusb;
|
|
|
|
/* This should *not* happen */
|
|
sisusb = usb_get_intfdata(intf);
|
|
if (!sisusb)
|
|
return;
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
sisusb_console_exit(sisusb);
|
|
#endif
|
|
|
|
usb_deregister_dev(intf, &usb_sisusb_class);
|
|
|
|
mutex_lock(&sisusb->lock);
|
|
|
|
/* Wait for all URBs to complete and kill them in case (MUST do) */
|
|
if (!sisusb_wait_all_out_complete(sisusb))
|
|
sisusb_kill_all_busy(sisusb);
|
|
|
|
usb_set_intfdata(intf, NULL);
|
|
|
|
sisusb->present = 0;
|
|
sisusb->ready = 0;
|
|
|
|
mutex_unlock(&sisusb->lock);
|
|
|
|
/* decrement our usage count */
|
|
kref_put(&sisusb->kref, sisusb_delete);
|
|
}
|
|
|
|
static const struct usb_device_id sisusb_table[] = {
|
|
{ USB_DEVICE(0x0711, 0x0550) },
|
|
{ USB_DEVICE(0x0711, 0x0900) },
|
|
{ USB_DEVICE(0x0711, 0x0901) },
|
|
{ USB_DEVICE(0x0711, 0x0902) },
|
|
{ USB_DEVICE(0x0711, 0x0903) },
|
|
{ USB_DEVICE(0x0711, 0x0918) },
|
|
{ USB_DEVICE(0x0711, 0x0920) },
|
|
{ USB_DEVICE(0x0711, 0x0950) },
|
|
{ USB_DEVICE(0x0711, 0x5200) },
|
|
{ USB_DEVICE(0x182d, 0x021c) },
|
|
{ USB_DEVICE(0x182d, 0x0269) },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, sisusb_table);
|
|
|
|
static struct usb_driver sisusb_driver = {
|
|
.name = "sisusb",
|
|
.probe = sisusb_probe,
|
|
.disconnect = sisusb_disconnect,
|
|
.id_table = sisusb_table,
|
|
};
|
|
|
|
static int __init usb_sisusb_init(void)
|
|
{
|
|
|
|
#ifdef INCL_SISUSB_CON
|
|
sisusb_init_concode();
|
|
#endif
|
|
|
|
return usb_register(&sisusb_driver);
|
|
}
|
|
|
|
static void __exit usb_sisusb_exit(void)
|
|
{
|
|
usb_deregister(&sisusb_driver);
|
|
}
|
|
|
|
module_init(usb_sisusb_init);
|
|
module_exit(usb_sisusb_exit);
|
|
|
|
MODULE_AUTHOR("Thomas Winischhofer <thomas@winischhofer.net>");
|
|
MODULE_DESCRIPTION("sisusbvga - Driver for Net2280/SiS315-based USB2VGA dongles");
|
|
MODULE_LICENSE("GPL");
|
|
|