mirror of https://gitee.com/openkylin/linux.git
b44e108b6f
When PCI error is detected, in some architectures (like PowerPC) a slot reset is performed - the driver's error handlers are in charge of "disable" device before the reset, and re-enable it after a successful slot reset. There are two cases though that another path is taken on the code: if the slot reset is not successful or if too many errors already happened in the specific adapter (meaning that possibly the device is experiencing a HW failure that slot reset is not able to solve), the core PCI error mechanism (called EEH in PowerPC) will remove the adapter from the system, since it will consider this as a permanent failure on device. In this case, a path is taken that leads to bnx2x_chip_cleanup() calling bnx2x_reset_hw(), which then tries to perform a HW reset on chip. This reset won't succeed since the HW is in a fault state, which can be seen by multiple messages on kernel log like below: bnx2x: [bnx2x_issue_dmae_with_comp:552(eth1)]DMAE timeout! bnx2x: [bnx2x_write_dmae:600(eth1)]DMAE returned failure -1 After some time, the PCI error mechanism gives up on waiting the driver's correct removal procedure and forcibly remove the adapter from the system. We can see soft lockup while core PCI error mechanism is waiting for driver to accomplish the right removal process. This patch adds a verification to avoid a chip reset whenever the function is in PCI error state - since this case is only reached when we have a device being removed because of a permanent failure, the HW chip reset is not expected to work fine neither is necessary. Also, as a minor improvement in error path, we avoid the MCP information dump in case of non-recoverable PCI error (when adapter is about to be removed), since it will certainly fail. Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-By: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| appletalk | ||
| arcnet | ||
| bonding | ||
| caif | ||
| can | ||
| cris | ||
| dsa | ||
| ethernet | ||
| fddi | ||
| fjes | ||
| hamradio | ||
| hippi | ||
| hyperv | ||
| ieee802154 | ||
| ipvlan | ||
| irda | ||
| phy | ||
| plip | ||
| ppp | ||
| slip | ||
| team | ||
| usb | ||
| vmxnet3 | ||
| wan | ||
| wimax | ||
| wireless | ||
| xen-netback | ||
| Kconfig | ||
| LICENSE.SRC | ||
| Makefile | ||
| Space.c | ||
| dummy.c | ||
| eql.c | ||
| geneve.c | ||
| gtp.c | ||
| ifb.c | ||
| loopback.c | ||
| macsec.c | ||
| macvlan.c | ||
| macvtap.c | ||
| mdio.c | ||
| mii.c | ||
| netconsole.c | ||
| nlmon.c | ||
| ntb_netdev.c | ||
| rionet.c | ||
| sb1000.c | ||
| sungem_phy.c | ||
| tun.c | ||
| veth.c | ||
| virtio_net.c | ||
| vrf.c | ||
| vxlan.c | ||
| xen-netfront.c | ||