mirror of https://gitee.com/openkylin/linux.git
96 lines
2.7 KiB
C
96 lines
2.7 KiB
C
/*
|
|
* SuperH Mobile SDHI
|
|
*
|
|
* Copyright (C) 2010 Magnus Damm
|
|
* Copyright (C) 2010 Kuninori Morimoto
|
|
* Copyright (C) 2010 Simon Horman
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Parts inspired by u-boot
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <mach/mmc.h>
|
|
#include <linux/mmc/boot.h>
|
|
#include <linux/mmc/tmio.h>
|
|
|
|
#include "sdhi-shmobile.h"
|
|
|
|
#define PORT179CR 0xe60520b3
|
|
#define PORT180CR 0xe60520b4
|
|
#define PORT181CR 0xe60520b5
|
|
#define PORT182CR 0xe60520b6
|
|
#define PORT183CR 0xe60520b7
|
|
#define PORT184CR 0xe60520b8
|
|
|
|
#define SMSTPCR3 0xe615013c
|
|
|
|
#define CR_INPUT_ENABLE 0x10
|
|
#define CR_FUNCTION1 0x01
|
|
|
|
#define SDHI1_BASE (void __iomem *)0xe6860000
|
|
#define SDHI_BASE SDHI1_BASE
|
|
|
|
/* SuperH Mobile SDHI loader
|
|
*
|
|
* loads the zImage from an SD card starting from block 0
|
|
* on physical partition 1
|
|
*
|
|
* The image must be start with a vrl4 header and
|
|
* the zImage must start at offset 512 of the image. That is,
|
|
* at block 1 (=byte 512) of physical partition 1
|
|
*
|
|
* Use the following line to write the vrl4 formated zImage
|
|
* to an SD card
|
|
* # dd if=vrl4.out of=/dev/sdx bs=512
|
|
*/
|
|
asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
|
|
{
|
|
int high_capacity;
|
|
|
|
mmc_init_progress();
|
|
|
|
mmc_update_progress(MMC_PROGRESS_ENTER);
|
|
/* Initialise SDHI1 */
|
|
/* PORT184CR: GPIO_FN_SDHICMD1 Control */
|
|
__raw_writeb(CR_FUNCTION1, PORT184CR);
|
|
/* PORT179CR: GPIO_FN_SDHICLK1 Control */
|
|
__raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
|
|
/* PORT181CR: GPIO_FN_SDHID1_3 Control */
|
|
__raw_writeb(CR_FUNCTION1, PORT183CR);
|
|
/* PORT182CR: GPIO_FN_SDHID1_2 Control */
|
|
__raw_writeb(CR_FUNCTION1, PORT182CR);
|
|
/* PORT183CR: GPIO_FN_SDHID1_1 Control */
|
|
__raw_writeb(CR_FUNCTION1, PORT181CR);
|
|
/* PORT180CR: GPIO_FN_SDHID1_0 Control */
|
|
__raw_writeb(CR_FUNCTION1, PORT180CR);
|
|
|
|
/* Enable clock to SDHI1 hardware block */
|
|
__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
|
|
|
|
/* setup SDHI hardware */
|
|
mmc_update_progress(MMC_PROGRESS_INIT);
|
|
high_capacity = sdhi_boot_init(SDHI_BASE);
|
|
if (high_capacity < 0)
|
|
goto err;
|
|
|
|
mmc_update_progress(MMC_PROGRESS_LOAD);
|
|
/* load kernel */
|
|
if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
|
|
0, /* Kernel is at block 1 */
|
|
(len + TMIO_BBS - 1) / TMIO_BBS, buf))
|
|
goto err;
|
|
|
|
/* Disable clock to SDHI1 hardware block */
|
|
__raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3);
|
|
|
|
mmc_update_progress(MMC_PROGRESS_DONE);
|
|
|
|
return;
|
|
err:
|
|
for(;;);
|
|
}
|