mirror of https://gitee.com/openkylin/linux.git
314 lines
7.9 KiB
C
314 lines
7.9 KiB
C
/*
|
|
* MTX-1 platform devices registration (Au1500)
|
|
*
|
|
* Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <mtd/mtd-abi.h>
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/reboot.h>
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
#include <asm/mach-au1x00/au1xxx_eth.h>
|
|
#include <prom.h>
|
|
|
|
const char *get_system_type(void)
|
|
{
|
|
return "MTX-1";
|
|
}
|
|
|
|
void __init prom_init(void)
|
|
{
|
|
unsigned char *memsize_str;
|
|
unsigned long memsize;
|
|
|
|
prom_argc = fw_arg0;
|
|
prom_argv = (char **)fw_arg1;
|
|
prom_envp = (char **)fw_arg2;
|
|
|
|
prom_init_cmdline();
|
|
|
|
memsize_str = prom_getenv("memsize");
|
|
if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
|
|
memsize = 0x04000000;
|
|
add_memory_region(0, memsize, BOOT_MEM_RAM);
|
|
}
|
|
|
|
void prom_putchar(unsigned char c)
|
|
{
|
|
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
|
|
}
|
|
|
|
static void mtx1_reset(char *c)
|
|
{
|
|
/* Jump to the reset vector */
|
|
__asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000));
|
|
}
|
|
|
|
static void mtx1_power_off(void)
|
|
{
|
|
while (1)
|
|
asm volatile (
|
|
" .set mips32 \n"
|
|
" wait \n"
|
|
" .set mips0 \n");
|
|
}
|
|
|
|
void __init board_setup(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
|
|
/* Enable USB power switch */
|
|
alchemy_gpio_direction_output(204, 0);
|
|
#endif /* IS_ENABLED(CONFIG_USB_OHCI_HCD) */
|
|
|
|
/* Initialize sys_pinfunc */
|
|
alchemy_wrsys(SYS_PF_NI2, AU1000_SYS_PINFUNC);
|
|
|
|
/* Initialize GPIO */
|
|
alchemy_wrsys(~0, AU1000_SYS_TRIOUTCLR);
|
|
alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */
|
|
alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */
|
|
alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */
|
|
alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */
|
|
|
|
/* Enable LED and set it to green */
|
|
alchemy_gpio_direction_output(211, 1); /* green on */
|
|
alchemy_gpio_direction_output(212, 0); /* red off */
|
|
|
|
pm_power_off = mtx1_power_off;
|
|
_machine_halt = mtx1_power_off;
|
|
_machine_restart = mtx1_reset;
|
|
|
|
printk(KERN_INFO "4G Systems MTX-1 Board\n");
|
|
}
|
|
|
|
/******************************************************************************/
|
|
|
|
static struct gpio_keys_button mtx1_gpio_button[] = {
|
|
{
|
|
.gpio = 207,
|
|
.code = BTN_0,
|
|
.desc = "System button",
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_platform_data mtx1_buttons_data = {
|
|
.buttons = mtx1_gpio_button,
|
|
.nbuttons = ARRAY_SIZE(mtx1_gpio_button),
|
|
};
|
|
|
|
static struct platform_device mtx1_button = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &mtx1_buttons_data,
|
|
}
|
|
};
|
|
|
|
static struct resource mtx1_wdt_res[] = {
|
|
[0] = {
|
|
.start = 215,
|
|
.end = 215,
|
|
.name = "mtx1-wdt-gpio",
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
static struct platform_device mtx1_wdt = {
|
|
.name = "mtx1-wdt",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(mtx1_wdt_res),
|
|
.resource = mtx1_wdt_res,
|
|
};
|
|
|
|
static struct gpio_led default_leds[] = {
|
|
{
|
|
.name = "mtx1:green",
|
|
.gpio = 211,
|
|
}, {
|
|
.name = "mtx1:red",
|
|
.gpio = 212,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data mtx1_led_data = {
|
|
.num_leds = ARRAY_SIZE(default_leds),
|
|
.leds = default_leds,
|
|
};
|
|
|
|
static struct platform_device mtx1_gpio_leds = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &mtx1_led_data,
|
|
}
|
|
};
|
|
|
|
static struct mtd_partition mtx1_mtd_partitions[] = {
|
|
{
|
|
.name = "filesystem",
|
|
.size = 0x01C00000,
|
|
.offset = 0,
|
|
},
|
|
{
|
|
.name = "yamon",
|
|
.size = 0x00100000,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.mask_flags = MTD_WRITEABLE,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.size = 0x002c0000,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
{
|
|
.name = "yamon env",
|
|
.size = 0x00040000,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data mtx1_flash_data = {
|
|
.width = 4,
|
|
.nr_parts = 4,
|
|
.parts = mtx1_mtd_partitions,
|
|
};
|
|
|
|
static struct resource mtx1_mtd_resource = {
|
|
.start = 0x1e000000,
|
|
.end = 0x1fffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device mtx1_mtd = {
|
|
.name = "physmap-flash",
|
|
.dev = {
|
|
.platform_data = &mtx1_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &mtx1_mtd_resource,
|
|
};
|
|
|
|
static struct resource alchemy_pci_host_res[] = {
|
|
[0] = {
|
|
.start = AU1500_PCI_PHYS_ADDR,
|
|
.end = AU1500_PCI_PHYS_ADDR + 0xfff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static int mtx1_pci_idsel(unsigned int devsel, int assert)
|
|
{
|
|
/* This function is only necessary to support a proprietary Cardbus
|
|
* adapter on the mtx-1 "singleboard" variant. It triggers a custom
|
|
* logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
|
|
*/
|
|
udelay(1);
|
|
|
|
if (assert && devsel != 0)
|
|
/* Suppress signal to Cardbus */
|
|
alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */
|
|
else
|
|
alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */
|
|
|
|
udelay(1);
|
|
return 1;
|
|
}
|
|
|
|
static const char mtx1_irqtab[][5] = {
|
|
[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
|
|
[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
|
|
[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
|
|
[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
|
|
[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
|
|
[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
|
|
[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
|
|
[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
|
|
};
|
|
|
|
static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
|
|
{
|
|
return mtx1_irqtab[slot][pin];
|
|
}
|
|
|
|
static struct alchemy_pci_platdata mtx1_pci_pd = {
|
|
.board_map_irq = mtx1_map_pci_irq,
|
|
.board_pci_idsel = mtx1_pci_idsel,
|
|
.pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
|
|
PCI_CONFIG_CH |
|
|
#if defined(__MIPSEB__)
|
|
PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
|
|
#else
|
|
0,
|
|
#endif
|
|
};
|
|
|
|
static struct platform_device mtx1_pci_host = {
|
|
.dev.platform_data = &mtx1_pci_pd,
|
|
.name = "alchemy-pci",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(alchemy_pci_host_res),
|
|
.resource = alchemy_pci_host_res,
|
|
};
|
|
|
|
static struct platform_device *mtx1_devs[] __initdata = {
|
|
&mtx1_pci_host,
|
|
&mtx1_gpio_leds,
|
|
&mtx1_wdt,
|
|
&mtx1_button,
|
|
&mtx1_mtd,
|
|
};
|
|
|
|
static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
|
|
.phy_search_highest_addr = 1,
|
|
.phy1_search_mac0 = 1,
|
|
};
|
|
|
|
static int __init mtx1_register_devices(void)
|
|
{
|
|
int rc;
|
|
|
|
irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH);
|
|
irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW);
|
|
irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW);
|
|
irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW);
|
|
irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
|
|
|
|
au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
|
|
|
|
rc = gpio_request(mtx1_gpio_button[0].gpio,
|
|
mtx1_gpio_button[0].desc);
|
|
if (rc < 0) {
|
|
printk(KERN_INFO "mtx1: failed to request %d\n",
|
|
mtx1_gpio_button[0].gpio);
|
|
goto out;
|
|
}
|
|
gpio_direction_input(mtx1_gpio_button[0].gpio);
|
|
out:
|
|
return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
|
|
}
|
|
arch_initcall(mtx1_register_devices);
|