mirror of https://gitee.com/openkylin/linux.git
66a377c504
This fixes CCID3 to give much closer performance to RFC4342. CCID3 is meant to alter sending rate based on RTT and loss. The performance was verified against: http://wand.net.nz/~perry/max_download.php For example I tested with netem and had the following parameters: Delayed Acks 1, MSS 256 bytes, RTT 105 ms, packet loss 5%. This gives a theoretical speed of 71.9 Kbits/s. I measured across three runs with this patch set and got 70.1 Kbits/s. Without this patchset the average was 232 Kbits/s which means Linux can't be used for CCID3 research properly. I also tested with netem turned off so box just acting as router with 1.2 msec RTT. The performance with this is the same with or without the patch at around 30 Mbit/s. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| Makefile | ||
| loss_interval.c | ||
| loss_interval.h | ||
| packet_history.c | ||
| packet_history.h | ||
| tfrc.h | ||
| tfrc_equation.c | ||