mirror of https://gitee.com/openkylin/linux.git
714b1dd8f7
It's possible to hit a race condition if interrupts are generated on a GPIO pin when the IRQ line in question is being disabled. If the interrupt is freed, bcm2835_gpio_irq_disable() is called which disables the event generation sources (edge, level). If an event occurred between the last disabling of hard IRQs and the write to the event source registers, a bit would be set in the GPIO event detect register (GPEDSn) which goes unacknowledged by bcm2835_gpio_irq_handler() so Linux complains loudly. There is no per-GPIO mask register, so when disabling GPIO interrupts write 1 to the relevant bit in GPEDSn to clear out any stale events. Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| pinctrl-bcm281xx.c | ||
| pinctrl-bcm2835.c | ||
| pinctrl-cygnus-gpio.c | ||
| pinctrl-cygnus-mux.c | ||