mirror of https://gitee.com/openkylin/linux.git
3513 lines
95 KiB
C
3513 lines
95 KiB
C
/* bnx2x_ethtool.c: Broadcom Everest network driver.
|
|
*
|
|
* Copyright (c) 2007-2013 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
|
|
* Written by: Eliezer Tamir
|
|
* Based on code from Michael Chan's bnx2 driver
|
|
* UDP CSUM errata workaround by Arik Gendelman
|
|
* Slowpath and fastpath rework by Vladislav Zolotarov
|
|
* Statistics and Link management by Yitchak Gertner
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/ethtool.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/types.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/crc32.h>
|
|
#include "bnx2x.h"
|
|
#include "bnx2x_cmn.h"
|
|
#include "bnx2x_dump.h"
|
|
#include "bnx2x_init.h"
|
|
|
|
/* Note: in the format strings below %s is replaced by the queue-name which is
|
|
* either its index or 'fcoe' for the fcoe queue. Make sure the format string
|
|
* length does not exceed ETH_GSTRING_LEN - MAX_QUEUE_NAME_LEN + 2
|
|
*/
|
|
#define MAX_QUEUE_NAME_LEN 4
|
|
static const struct {
|
|
long offset;
|
|
int size;
|
|
char string[ETH_GSTRING_LEN];
|
|
} bnx2x_q_stats_arr[] = {
|
|
/* 1 */ { Q_STATS_OFFSET32(total_bytes_received_hi), 8, "[%s]: rx_bytes" },
|
|
{ Q_STATS_OFFSET32(total_unicast_packets_received_hi),
|
|
8, "[%s]: rx_ucast_packets" },
|
|
{ Q_STATS_OFFSET32(total_multicast_packets_received_hi),
|
|
8, "[%s]: rx_mcast_packets" },
|
|
{ Q_STATS_OFFSET32(total_broadcast_packets_received_hi),
|
|
8, "[%s]: rx_bcast_packets" },
|
|
{ Q_STATS_OFFSET32(no_buff_discard_hi), 8, "[%s]: rx_discards" },
|
|
{ Q_STATS_OFFSET32(rx_err_discard_pkt),
|
|
4, "[%s]: rx_phy_ip_err_discards"},
|
|
{ Q_STATS_OFFSET32(rx_skb_alloc_failed),
|
|
4, "[%s]: rx_skb_alloc_discard" },
|
|
{ Q_STATS_OFFSET32(hw_csum_err), 4, "[%s]: rx_csum_offload_errors" },
|
|
|
|
{ Q_STATS_OFFSET32(total_bytes_transmitted_hi), 8, "[%s]: tx_bytes" },
|
|
/* 10 */{ Q_STATS_OFFSET32(total_unicast_packets_transmitted_hi),
|
|
8, "[%s]: tx_ucast_packets" },
|
|
{ Q_STATS_OFFSET32(total_multicast_packets_transmitted_hi),
|
|
8, "[%s]: tx_mcast_packets" },
|
|
{ Q_STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
|
|
8, "[%s]: tx_bcast_packets" },
|
|
{ Q_STATS_OFFSET32(total_tpa_aggregations_hi),
|
|
8, "[%s]: tpa_aggregations" },
|
|
{ Q_STATS_OFFSET32(total_tpa_aggregated_frames_hi),
|
|
8, "[%s]: tpa_aggregated_frames"},
|
|
{ Q_STATS_OFFSET32(total_tpa_bytes_hi), 8, "[%s]: tpa_bytes"},
|
|
{ Q_STATS_OFFSET32(driver_filtered_tx_pkt),
|
|
4, "[%s]: driver_filtered_tx_pkt" }
|
|
};
|
|
|
|
#define BNX2X_NUM_Q_STATS ARRAY_SIZE(bnx2x_q_stats_arr)
|
|
|
|
static const struct {
|
|
long offset;
|
|
int size;
|
|
u32 flags;
|
|
#define STATS_FLAGS_PORT 1
|
|
#define STATS_FLAGS_FUNC 2
|
|
#define STATS_FLAGS_BOTH (STATS_FLAGS_FUNC | STATS_FLAGS_PORT)
|
|
char string[ETH_GSTRING_LEN];
|
|
} bnx2x_stats_arr[] = {
|
|
/* 1 */ { STATS_OFFSET32(total_bytes_received_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_bytes" },
|
|
{ STATS_OFFSET32(error_bytes_received_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_error_bytes" },
|
|
{ STATS_OFFSET32(total_unicast_packets_received_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_ucast_packets" },
|
|
{ STATS_OFFSET32(total_multicast_packets_received_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_mcast_packets" },
|
|
{ STATS_OFFSET32(total_broadcast_packets_received_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_bcast_packets" },
|
|
{ STATS_OFFSET32(rx_stat_dot3statsfcserrors_hi),
|
|
8, STATS_FLAGS_PORT, "rx_crc_errors" },
|
|
{ STATS_OFFSET32(rx_stat_dot3statsalignmenterrors_hi),
|
|
8, STATS_FLAGS_PORT, "rx_align_errors" },
|
|
{ STATS_OFFSET32(rx_stat_etherstatsundersizepkts_hi),
|
|
8, STATS_FLAGS_PORT, "rx_undersize_packets" },
|
|
{ STATS_OFFSET32(etherstatsoverrsizepkts_hi),
|
|
8, STATS_FLAGS_PORT, "rx_oversize_packets" },
|
|
/* 10 */{ STATS_OFFSET32(rx_stat_etherstatsfragments_hi),
|
|
8, STATS_FLAGS_PORT, "rx_fragments" },
|
|
{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi),
|
|
8, STATS_FLAGS_PORT, "rx_jabbers" },
|
|
{ STATS_OFFSET32(no_buff_discard_hi),
|
|
8, STATS_FLAGS_BOTH, "rx_discards" },
|
|
{ STATS_OFFSET32(mac_filter_discard),
|
|
4, STATS_FLAGS_PORT, "rx_filtered_packets" },
|
|
{ STATS_OFFSET32(mf_tag_discard),
|
|
4, STATS_FLAGS_PORT, "rx_mf_tag_discard" },
|
|
{ STATS_OFFSET32(pfc_frames_received_hi),
|
|
8, STATS_FLAGS_PORT, "pfc_frames_received" },
|
|
{ STATS_OFFSET32(pfc_frames_sent_hi),
|
|
8, STATS_FLAGS_PORT, "pfc_frames_sent" },
|
|
{ STATS_OFFSET32(brb_drop_hi),
|
|
8, STATS_FLAGS_PORT, "rx_brb_discard" },
|
|
{ STATS_OFFSET32(brb_truncate_hi),
|
|
8, STATS_FLAGS_PORT, "rx_brb_truncate" },
|
|
{ STATS_OFFSET32(pause_frames_received_hi),
|
|
8, STATS_FLAGS_PORT, "rx_pause_frames" },
|
|
{ STATS_OFFSET32(rx_stat_maccontrolframesreceived_hi),
|
|
8, STATS_FLAGS_PORT, "rx_mac_ctrl_frames" },
|
|
{ STATS_OFFSET32(nig_timer_max),
|
|
4, STATS_FLAGS_PORT, "rx_constant_pause_events" },
|
|
/* 20 */{ STATS_OFFSET32(rx_err_discard_pkt),
|
|
4, STATS_FLAGS_BOTH, "rx_phy_ip_err_discards"},
|
|
{ STATS_OFFSET32(rx_skb_alloc_failed),
|
|
4, STATS_FLAGS_BOTH, "rx_skb_alloc_discard" },
|
|
{ STATS_OFFSET32(hw_csum_err),
|
|
4, STATS_FLAGS_BOTH, "rx_csum_offload_errors" },
|
|
|
|
{ STATS_OFFSET32(total_bytes_transmitted_hi),
|
|
8, STATS_FLAGS_BOTH, "tx_bytes" },
|
|
{ STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_error_bytes" },
|
|
{ STATS_OFFSET32(total_unicast_packets_transmitted_hi),
|
|
8, STATS_FLAGS_BOTH, "tx_ucast_packets" },
|
|
{ STATS_OFFSET32(total_multicast_packets_transmitted_hi),
|
|
8, STATS_FLAGS_BOTH, "tx_mcast_packets" },
|
|
{ STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
|
|
8, STATS_FLAGS_BOTH, "tx_bcast_packets" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statsinternalmactransmiterrors_hi),
|
|
8, STATS_FLAGS_PORT, "tx_mac_errors" },
|
|
{ STATS_OFFSET32(rx_stat_dot3statscarriersenseerrors_hi),
|
|
8, STATS_FLAGS_PORT, "tx_carrier_errors" },
|
|
/* 30 */{ STATS_OFFSET32(tx_stat_dot3statssinglecollisionframes_hi),
|
|
8, STATS_FLAGS_PORT, "tx_single_collisions" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statsmultiplecollisionframes_hi),
|
|
8, STATS_FLAGS_PORT, "tx_multi_collisions" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statsdeferredtransmissions_hi),
|
|
8, STATS_FLAGS_PORT, "tx_deferred" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statsexcessivecollisions_hi),
|
|
8, STATS_FLAGS_PORT, "tx_excess_collisions" },
|
|
{ STATS_OFFSET32(tx_stat_dot3statslatecollisions_hi),
|
|
8, STATS_FLAGS_PORT, "tx_late_collisions" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatscollisions_hi),
|
|
8, STATS_FLAGS_PORT, "tx_total_collisions" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatspkts64octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_64_byte_packets" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatspkts65octetsto127octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_65_to_127_byte_packets" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatspkts128octetsto255octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_128_to_255_byte_packets" },
|
|
{ STATS_OFFSET32(tx_stat_etherstatspkts256octetsto511octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_256_to_511_byte_packets" },
|
|
/* 40 */{ STATS_OFFSET32(tx_stat_etherstatspkts512octetsto1023octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_512_to_1023_byte_packets" },
|
|
{ STATS_OFFSET32(etherstatspkts1024octetsto1522octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_1024_to_1522_byte_packets" },
|
|
{ STATS_OFFSET32(etherstatspktsover1522octets_hi),
|
|
8, STATS_FLAGS_PORT, "tx_1523_to_9022_byte_packets" },
|
|
{ STATS_OFFSET32(pause_frames_sent_hi),
|
|
8, STATS_FLAGS_PORT, "tx_pause_frames" },
|
|
{ STATS_OFFSET32(total_tpa_aggregations_hi),
|
|
8, STATS_FLAGS_FUNC, "tpa_aggregations" },
|
|
{ STATS_OFFSET32(total_tpa_aggregated_frames_hi),
|
|
8, STATS_FLAGS_FUNC, "tpa_aggregated_frames"},
|
|
{ STATS_OFFSET32(total_tpa_bytes_hi),
|
|
8, STATS_FLAGS_FUNC, "tpa_bytes"},
|
|
{ STATS_OFFSET32(recoverable_error),
|
|
4, STATS_FLAGS_FUNC, "recoverable_errors" },
|
|
{ STATS_OFFSET32(unrecoverable_error),
|
|
4, STATS_FLAGS_FUNC, "unrecoverable_errors" },
|
|
{ STATS_OFFSET32(driver_filtered_tx_pkt),
|
|
4, STATS_FLAGS_FUNC, "driver_filtered_tx_pkt" },
|
|
{ STATS_OFFSET32(eee_tx_lpi),
|
|
4, STATS_FLAGS_PORT, "Tx LPI entry count"}
|
|
};
|
|
|
|
#define BNX2X_NUM_STATS ARRAY_SIZE(bnx2x_stats_arr)
|
|
|
|
static int bnx2x_get_port_type(struct bnx2x *bp)
|
|
{
|
|
int port_type;
|
|
u32 phy_idx = bnx2x_get_cur_phy_idx(bp);
|
|
switch (bp->link_params.phy[phy_idx].media_type) {
|
|
case ETH_PHY_SFPP_10G_FIBER:
|
|
case ETH_PHY_SFP_1G_FIBER:
|
|
case ETH_PHY_XFP_FIBER:
|
|
case ETH_PHY_KR:
|
|
case ETH_PHY_CX4:
|
|
port_type = PORT_FIBRE;
|
|
break;
|
|
case ETH_PHY_DA_TWINAX:
|
|
port_type = PORT_DA;
|
|
break;
|
|
case ETH_PHY_BASE_T:
|
|
port_type = PORT_TP;
|
|
break;
|
|
case ETH_PHY_NOT_PRESENT:
|
|
port_type = PORT_NONE;
|
|
break;
|
|
case ETH_PHY_UNSPECIFIED:
|
|
default:
|
|
port_type = PORT_OTHER;
|
|
break;
|
|
}
|
|
return port_type;
|
|
}
|
|
|
|
static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int cfg_idx = bnx2x_get_link_cfg_idx(bp);
|
|
|
|
/* Dual Media boards present all available port types */
|
|
cmd->supported = bp->port.supported[cfg_idx] |
|
|
(bp->port.supported[cfg_idx ^ 1] &
|
|
(SUPPORTED_TP | SUPPORTED_FIBRE));
|
|
cmd->advertising = bp->port.advertising[cfg_idx];
|
|
if (bp->link_params.phy[bnx2x_get_cur_phy_idx(bp)].media_type ==
|
|
ETH_PHY_SFP_1G_FIBER) {
|
|
cmd->supported &= ~(SUPPORTED_10000baseT_Full);
|
|
cmd->advertising &= ~(ADVERTISED_10000baseT_Full);
|
|
}
|
|
|
|
if ((bp->state == BNX2X_STATE_OPEN) && bp->link_vars.link_up &&
|
|
!(bp->flags & MF_FUNC_DIS)) {
|
|
cmd->duplex = bp->link_vars.duplex;
|
|
|
|
if (IS_MF(bp) && !BP_NOMCP(bp))
|
|
ethtool_cmd_speed_set(cmd, bnx2x_get_mf_speed(bp));
|
|
else
|
|
ethtool_cmd_speed_set(cmd, bp->link_vars.line_speed);
|
|
} else {
|
|
cmd->duplex = DUPLEX_UNKNOWN;
|
|
ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
|
|
}
|
|
|
|
cmd->port = bnx2x_get_port_type(bp);
|
|
|
|
cmd->phy_address = bp->mdio.prtad;
|
|
cmd->transceiver = XCVR_INTERNAL;
|
|
|
|
if (bp->link_params.req_line_speed[cfg_idx] == SPEED_AUTO_NEG)
|
|
cmd->autoneg = AUTONEG_ENABLE;
|
|
else
|
|
cmd->autoneg = AUTONEG_DISABLE;
|
|
|
|
/* Publish LP advertised speeds and FC */
|
|
if (bp->link_vars.link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
|
|
u32 status = bp->link_vars.link_status;
|
|
|
|
cmd->lp_advertising |= ADVERTISED_Autoneg;
|
|
if (status & LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE)
|
|
cmd->lp_advertising |= ADVERTISED_Pause;
|
|
if (status & LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE)
|
|
cmd->lp_advertising |= ADVERTISED_Asym_Pause;
|
|
|
|
if (status & LINK_STATUS_LINK_PARTNER_10THD_CAPABLE)
|
|
cmd->lp_advertising |= ADVERTISED_10baseT_Half;
|
|
if (status & LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE)
|
|
cmd->lp_advertising |= ADVERTISED_10baseT_Full;
|
|
if (status & LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE)
|
|
cmd->lp_advertising |= ADVERTISED_100baseT_Half;
|
|
if (status & LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE)
|
|
cmd->lp_advertising |= ADVERTISED_100baseT_Full;
|
|
if (status & LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE)
|
|
cmd->lp_advertising |= ADVERTISED_1000baseT_Half;
|
|
if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE)
|
|
cmd->lp_advertising |= ADVERTISED_1000baseT_Full;
|
|
if (status & LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE)
|
|
cmd->lp_advertising |= ADVERTISED_2500baseX_Full;
|
|
if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE)
|
|
cmd->lp_advertising |= ADVERTISED_10000baseT_Full;
|
|
if (status & LINK_STATUS_LINK_PARTNER_20GXFD_CAPABLE)
|
|
cmd->lp_advertising |= ADVERTISED_20000baseKR2_Full;
|
|
}
|
|
|
|
cmd->maxtxpkt = 0;
|
|
cmd->maxrxpkt = 0;
|
|
|
|
DP(BNX2X_MSG_ETHTOOL, "ethtool_cmd: cmd %d\n"
|
|
" supported 0x%x advertising 0x%x speed %u\n"
|
|
" duplex %d port %d phy_address %d transceiver %d\n"
|
|
" autoneg %d maxtxpkt %d maxrxpkt %d\n",
|
|
cmd->cmd, cmd->supported, cmd->advertising,
|
|
ethtool_cmd_speed(cmd),
|
|
cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
|
|
cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
u32 advertising, cfg_idx, old_multi_phy_config, new_multi_phy_config;
|
|
u32 speed, phy_idx;
|
|
|
|
if (IS_MF_SD(bp))
|
|
return 0;
|
|
|
|
DP(BNX2X_MSG_ETHTOOL, "ethtool_cmd: cmd %d\n"
|
|
" supported 0x%x advertising 0x%x speed %u\n"
|
|
" duplex %d port %d phy_address %d transceiver %d\n"
|
|
" autoneg %d maxtxpkt %d maxrxpkt %d\n",
|
|
cmd->cmd, cmd->supported, cmd->advertising,
|
|
ethtool_cmd_speed(cmd),
|
|
cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
|
|
cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt);
|
|
|
|
speed = ethtool_cmd_speed(cmd);
|
|
|
|
/* If received a request for an unknown duplex, assume full*/
|
|
if (cmd->duplex == DUPLEX_UNKNOWN)
|
|
cmd->duplex = DUPLEX_FULL;
|
|
|
|
if (IS_MF_SI(bp)) {
|
|
u32 part;
|
|
u32 line_speed = bp->link_vars.line_speed;
|
|
|
|
/* use 10G if no link detected */
|
|
if (!line_speed)
|
|
line_speed = 10000;
|
|
|
|
if (bp->common.bc_ver < REQ_BC_VER_4_SET_MF_BW) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"To set speed BC %X or higher is required, please upgrade BC\n",
|
|
REQ_BC_VER_4_SET_MF_BW);
|
|
return -EINVAL;
|
|
}
|
|
|
|
part = (speed * 100) / line_speed;
|
|
|
|
if (line_speed < speed || !part) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Speed setting should be in a range from 1%% to 100%% of actual line speed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (bp->state != BNX2X_STATE_OPEN)
|
|
/* store value for following "load" */
|
|
bp->pending_max = part;
|
|
else
|
|
bnx2x_update_max_mf_config(bp, part);
|
|
|
|
return 0;
|
|
}
|
|
|
|
cfg_idx = bnx2x_get_link_cfg_idx(bp);
|
|
old_multi_phy_config = bp->link_params.multi_phy_config;
|
|
if (cmd->port != bnx2x_get_port_type(bp)) {
|
|
switch (cmd->port) {
|
|
case PORT_TP:
|
|
if (!(bp->port.supported[0] & SUPPORTED_TP ||
|
|
bp->port.supported[1] & SUPPORTED_TP)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Unsupported port type\n");
|
|
return -EINVAL;
|
|
}
|
|
bp->link_params.multi_phy_config &=
|
|
~PORT_HW_CFG_PHY_SELECTION_MASK;
|
|
if (bp->link_params.multi_phy_config &
|
|
PORT_HW_CFG_PHY_SWAPPED_ENABLED)
|
|
bp->link_params.multi_phy_config |=
|
|
PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
|
|
else
|
|
bp->link_params.multi_phy_config |=
|
|
PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
|
|
break;
|
|
case PORT_FIBRE:
|
|
case PORT_DA:
|
|
if (!(bp->port.supported[0] & SUPPORTED_FIBRE ||
|
|
bp->port.supported[1] & SUPPORTED_FIBRE)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Unsupported port type\n");
|
|
return -EINVAL;
|
|
}
|
|
bp->link_params.multi_phy_config &=
|
|
~PORT_HW_CFG_PHY_SELECTION_MASK;
|
|
if (bp->link_params.multi_phy_config &
|
|
PORT_HW_CFG_PHY_SWAPPED_ENABLED)
|
|
bp->link_params.multi_phy_config |=
|
|
PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
|
|
else
|
|
bp->link_params.multi_phy_config |=
|
|
PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
|
|
break;
|
|
default:
|
|
DP(BNX2X_MSG_ETHTOOL, "Unsupported port type\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
/* Save new config in case command complete successfully */
|
|
new_multi_phy_config = bp->link_params.multi_phy_config;
|
|
/* Get the new cfg_idx */
|
|
cfg_idx = bnx2x_get_link_cfg_idx(bp);
|
|
/* Restore old config in case command failed */
|
|
bp->link_params.multi_phy_config = old_multi_phy_config;
|
|
DP(BNX2X_MSG_ETHTOOL, "cfg_idx = %x\n", cfg_idx);
|
|
|
|
if (cmd->autoneg == AUTONEG_ENABLE) {
|
|
u32 an_supported_speed = bp->port.supported[cfg_idx];
|
|
if (bp->link_params.phy[EXT_PHY1].type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
|
|
an_supported_speed |= (SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full);
|
|
if (!(bp->port.supported[cfg_idx] & SUPPORTED_Autoneg)) {
|
|
DP(BNX2X_MSG_ETHTOOL, "Autoneg not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* advertise the requested speed and duplex if supported */
|
|
if (cmd->advertising & ~an_supported_speed) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Advertisement parameters are not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
bp->link_params.req_line_speed[cfg_idx] = SPEED_AUTO_NEG;
|
|
bp->link_params.req_duplex[cfg_idx] = cmd->duplex;
|
|
bp->port.advertising[cfg_idx] = (ADVERTISED_Autoneg |
|
|
cmd->advertising);
|
|
if (cmd->advertising) {
|
|
|
|
bp->link_params.speed_cap_mask[cfg_idx] = 0;
|
|
if (cmd->advertising & ADVERTISED_10baseT_Half) {
|
|
bp->link_params.speed_cap_mask[cfg_idx] |=
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF;
|
|
}
|
|
if (cmd->advertising & ADVERTISED_10baseT_Full)
|
|
bp->link_params.speed_cap_mask[cfg_idx] |=
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL;
|
|
|
|
if (cmd->advertising & ADVERTISED_100baseT_Full)
|
|
bp->link_params.speed_cap_mask[cfg_idx] |=
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL;
|
|
|
|
if (cmd->advertising & ADVERTISED_100baseT_Half) {
|
|
bp->link_params.speed_cap_mask[cfg_idx] |=
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF;
|
|
}
|
|
if (cmd->advertising & ADVERTISED_1000baseT_Half) {
|
|
bp->link_params.speed_cap_mask[cfg_idx] |=
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G;
|
|
}
|
|
if (cmd->advertising & (ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_1000baseKX_Full))
|
|
bp->link_params.speed_cap_mask[cfg_idx] |=
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G;
|
|
|
|
if (cmd->advertising & (ADVERTISED_10000baseT_Full |
|
|
ADVERTISED_10000baseKX4_Full |
|
|
ADVERTISED_10000baseKR_Full))
|
|
bp->link_params.speed_cap_mask[cfg_idx] |=
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G;
|
|
|
|
if (cmd->advertising & ADVERTISED_20000baseKR2_Full)
|
|
bp->link_params.speed_cap_mask[cfg_idx] |=
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_20G;
|
|
}
|
|
} else { /* forced speed */
|
|
/* advertise the requested speed and duplex if supported */
|
|
switch (speed) {
|
|
case SPEED_10:
|
|
if (cmd->duplex == DUPLEX_FULL) {
|
|
if (!(bp->port.supported[cfg_idx] &
|
|
SUPPORTED_10baseT_Full)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"10M full not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
advertising = (ADVERTISED_10baseT_Full |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
if (!(bp->port.supported[cfg_idx] &
|
|
SUPPORTED_10baseT_Half)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"10M half not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
advertising = (ADVERTISED_10baseT_Half |
|
|
ADVERTISED_TP);
|
|
}
|
|
break;
|
|
|
|
case SPEED_100:
|
|
if (cmd->duplex == DUPLEX_FULL) {
|
|
if (!(bp->port.supported[cfg_idx] &
|
|
SUPPORTED_100baseT_Full)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"100M full not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
advertising = (ADVERTISED_100baseT_Full |
|
|
ADVERTISED_TP);
|
|
} else {
|
|
if (!(bp->port.supported[cfg_idx] &
|
|
SUPPORTED_100baseT_Half)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"100M half not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
advertising = (ADVERTISED_100baseT_Half |
|
|
ADVERTISED_TP);
|
|
}
|
|
break;
|
|
|
|
case SPEED_1000:
|
|
if (cmd->duplex != DUPLEX_FULL) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"1G half not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(bp->port.supported[cfg_idx] &
|
|
SUPPORTED_1000baseT_Full)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"1G full not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
advertising = (ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_TP);
|
|
break;
|
|
|
|
case SPEED_2500:
|
|
if (cmd->duplex != DUPLEX_FULL) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"2.5G half not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(bp->port.supported[cfg_idx]
|
|
& SUPPORTED_2500baseX_Full)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"2.5G full not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
advertising = (ADVERTISED_2500baseX_Full |
|
|
ADVERTISED_TP);
|
|
break;
|
|
|
|
case SPEED_10000:
|
|
if (cmd->duplex != DUPLEX_FULL) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"10G half not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
phy_idx = bnx2x_get_cur_phy_idx(bp);
|
|
if (!(bp->port.supported[cfg_idx]
|
|
& SUPPORTED_10000baseT_Full) ||
|
|
(bp->link_params.phy[phy_idx].media_type ==
|
|
ETH_PHY_SFP_1G_FIBER)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"10G full not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
advertising = (ADVERTISED_10000baseT_Full |
|
|
ADVERTISED_FIBRE);
|
|
break;
|
|
|
|
default:
|
|
DP(BNX2X_MSG_ETHTOOL, "Unsupported speed %u\n", speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
bp->link_params.req_line_speed[cfg_idx] = speed;
|
|
bp->link_params.req_duplex[cfg_idx] = cmd->duplex;
|
|
bp->port.advertising[cfg_idx] = advertising;
|
|
}
|
|
|
|
DP(BNX2X_MSG_ETHTOOL, "req_line_speed %d\n"
|
|
" req_duplex %d advertising 0x%x\n",
|
|
bp->link_params.req_line_speed[cfg_idx],
|
|
bp->link_params.req_duplex[cfg_idx],
|
|
bp->port.advertising[cfg_idx]);
|
|
|
|
/* Set new config */
|
|
bp->link_params.multi_phy_config = new_multi_phy_config;
|
|
if (netif_running(dev)) {
|
|
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
|
|
bnx2x_link_set(bp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define DUMP_ALL_PRESETS 0x1FFF
|
|
#define DUMP_MAX_PRESETS 13
|
|
|
|
static int __bnx2x_get_preset_regs_len(struct bnx2x *bp, u32 preset)
|
|
{
|
|
if (CHIP_IS_E1(bp))
|
|
return dump_num_registers[0][preset-1];
|
|
else if (CHIP_IS_E1H(bp))
|
|
return dump_num_registers[1][preset-1];
|
|
else if (CHIP_IS_E2(bp))
|
|
return dump_num_registers[2][preset-1];
|
|
else if (CHIP_IS_E3A0(bp))
|
|
return dump_num_registers[3][preset-1];
|
|
else if (CHIP_IS_E3B0(bp))
|
|
return dump_num_registers[4][preset-1];
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int __bnx2x_get_regs_len(struct bnx2x *bp)
|
|
{
|
|
u32 preset_idx;
|
|
int regdump_len = 0;
|
|
|
|
/* Calculate the total preset regs length */
|
|
for (preset_idx = 1; preset_idx <= DUMP_MAX_PRESETS; preset_idx++)
|
|
regdump_len += __bnx2x_get_preset_regs_len(bp, preset_idx);
|
|
|
|
return regdump_len;
|
|
}
|
|
|
|
static int bnx2x_get_regs_len(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int regdump_len = 0;
|
|
|
|
if (IS_VF(bp))
|
|
return 0;
|
|
|
|
regdump_len = __bnx2x_get_regs_len(bp);
|
|
regdump_len *= 4;
|
|
regdump_len += sizeof(struct dump_header);
|
|
|
|
return regdump_len;
|
|
}
|
|
|
|
#define IS_E1_REG(chips) ((chips & DUMP_CHIP_E1) == DUMP_CHIP_E1)
|
|
#define IS_E1H_REG(chips) ((chips & DUMP_CHIP_E1H) == DUMP_CHIP_E1H)
|
|
#define IS_E2_REG(chips) ((chips & DUMP_CHIP_E2) == DUMP_CHIP_E2)
|
|
#define IS_E3A0_REG(chips) ((chips & DUMP_CHIP_E3A0) == DUMP_CHIP_E3A0)
|
|
#define IS_E3B0_REG(chips) ((chips & DUMP_CHIP_E3B0) == DUMP_CHIP_E3B0)
|
|
|
|
#define IS_REG_IN_PRESET(presets, idx) \
|
|
((presets & (1 << (idx-1))) == (1 << (idx-1)))
|
|
|
|
/******* Paged registers info selectors ********/
|
|
static const u32 *__bnx2x_get_page_addr_ar(struct bnx2x *bp)
|
|
{
|
|
if (CHIP_IS_E2(bp))
|
|
return page_vals_e2;
|
|
else if (CHIP_IS_E3(bp))
|
|
return page_vals_e3;
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
static u32 __bnx2x_get_page_reg_num(struct bnx2x *bp)
|
|
{
|
|
if (CHIP_IS_E2(bp))
|
|
return PAGE_MODE_VALUES_E2;
|
|
else if (CHIP_IS_E3(bp))
|
|
return PAGE_MODE_VALUES_E3;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static const u32 *__bnx2x_get_page_write_ar(struct bnx2x *bp)
|
|
{
|
|
if (CHIP_IS_E2(bp))
|
|
return page_write_regs_e2;
|
|
else if (CHIP_IS_E3(bp))
|
|
return page_write_regs_e3;
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
static u32 __bnx2x_get_page_write_num(struct bnx2x *bp)
|
|
{
|
|
if (CHIP_IS_E2(bp))
|
|
return PAGE_WRITE_REGS_E2;
|
|
else if (CHIP_IS_E3(bp))
|
|
return PAGE_WRITE_REGS_E3;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static const struct reg_addr *__bnx2x_get_page_read_ar(struct bnx2x *bp)
|
|
{
|
|
if (CHIP_IS_E2(bp))
|
|
return page_read_regs_e2;
|
|
else if (CHIP_IS_E3(bp))
|
|
return page_read_regs_e3;
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
static u32 __bnx2x_get_page_read_num(struct bnx2x *bp)
|
|
{
|
|
if (CHIP_IS_E2(bp))
|
|
return PAGE_READ_REGS_E2;
|
|
else if (CHIP_IS_E3(bp))
|
|
return PAGE_READ_REGS_E3;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static bool bnx2x_is_reg_in_chip(struct bnx2x *bp,
|
|
const struct reg_addr *reg_info)
|
|
{
|
|
if (CHIP_IS_E1(bp))
|
|
return IS_E1_REG(reg_info->chips);
|
|
else if (CHIP_IS_E1H(bp))
|
|
return IS_E1H_REG(reg_info->chips);
|
|
else if (CHIP_IS_E2(bp))
|
|
return IS_E2_REG(reg_info->chips);
|
|
else if (CHIP_IS_E3A0(bp))
|
|
return IS_E3A0_REG(reg_info->chips);
|
|
else if (CHIP_IS_E3B0(bp))
|
|
return IS_E3B0_REG(reg_info->chips);
|
|
else
|
|
return false;
|
|
}
|
|
|
|
static bool bnx2x_is_wreg_in_chip(struct bnx2x *bp,
|
|
const struct wreg_addr *wreg_info)
|
|
{
|
|
if (CHIP_IS_E1(bp))
|
|
return IS_E1_REG(wreg_info->chips);
|
|
else if (CHIP_IS_E1H(bp))
|
|
return IS_E1H_REG(wreg_info->chips);
|
|
else if (CHIP_IS_E2(bp))
|
|
return IS_E2_REG(wreg_info->chips);
|
|
else if (CHIP_IS_E3A0(bp))
|
|
return IS_E3A0_REG(wreg_info->chips);
|
|
else if (CHIP_IS_E3B0(bp))
|
|
return IS_E3B0_REG(wreg_info->chips);
|
|
else
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* bnx2x_read_pages_regs - read "paged" registers
|
|
*
|
|
* @bp device handle
|
|
* @p output buffer
|
|
*
|
|
* Reads "paged" memories: memories that may only be read by first writing to a
|
|
* specific address ("write address") and then reading from a specific address
|
|
* ("read address"). There may be more than one write address per "page" and
|
|
* more than one read address per write address.
|
|
*/
|
|
static void bnx2x_read_pages_regs(struct bnx2x *bp, u32 *p, u32 preset)
|
|
{
|
|
u32 i, j, k, n;
|
|
|
|
/* addresses of the paged registers */
|
|
const u32 *page_addr = __bnx2x_get_page_addr_ar(bp);
|
|
/* number of paged registers */
|
|
int num_pages = __bnx2x_get_page_reg_num(bp);
|
|
/* write addresses */
|
|
const u32 *write_addr = __bnx2x_get_page_write_ar(bp);
|
|
/* number of write addresses */
|
|
int write_num = __bnx2x_get_page_write_num(bp);
|
|
/* read addresses info */
|
|
const struct reg_addr *read_addr = __bnx2x_get_page_read_ar(bp);
|
|
/* number of read addresses */
|
|
int read_num = __bnx2x_get_page_read_num(bp);
|
|
u32 addr, size;
|
|
|
|
for (i = 0; i < num_pages; i++) {
|
|
for (j = 0; j < write_num; j++) {
|
|
REG_WR(bp, write_addr[j], page_addr[i]);
|
|
|
|
for (k = 0; k < read_num; k++) {
|
|
if (IS_REG_IN_PRESET(read_addr[k].presets,
|
|
preset)) {
|
|
size = read_addr[k].size;
|
|
for (n = 0; n < size; n++) {
|
|
addr = read_addr[k].addr + n*4;
|
|
*p++ = REG_RD(bp, addr);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int __bnx2x_get_preset_regs(struct bnx2x *bp, u32 *p, u32 preset)
|
|
{
|
|
u32 i, j, addr;
|
|
const struct wreg_addr *wreg_addr_p = NULL;
|
|
|
|
if (CHIP_IS_E1(bp))
|
|
wreg_addr_p = &wreg_addr_e1;
|
|
else if (CHIP_IS_E1H(bp))
|
|
wreg_addr_p = &wreg_addr_e1h;
|
|
else if (CHIP_IS_E2(bp))
|
|
wreg_addr_p = &wreg_addr_e2;
|
|
else if (CHIP_IS_E3A0(bp))
|
|
wreg_addr_p = &wreg_addr_e3;
|
|
else if (CHIP_IS_E3B0(bp))
|
|
wreg_addr_p = &wreg_addr_e3b0;
|
|
|
|
/* Read the idle_chk registers */
|
|
for (i = 0; i < IDLE_REGS_COUNT; i++) {
|
|
if (bnx2x_is_reg_in_chip(bp, &idle_reg_addrs[i]) &&
|
|
IS_REG_IN_PRESET(idle_reg_addrs[i].presets, preset)) {
|
|
for (j = 0; j < idle_reg_addrs[i].size; j++)
|
|
*p++ = REG_RD(bp, idle_reg_addrs[i].addr + j*4);
|
|
}
|
|
}
|
|
|
|
/* Read the regular registers */
|
|
for (i = 0; i < REGS_COUNT; i++) {
|
|
if (bnx2x_is_reg_in_chip(bp, ®_addrs[i]) &&
|
|
IS_REG_IN_PRESET(reg_addrs[i].presets, preset)) {
|
|
for (j = 0; j < reg_addrs[i].size; j++)
|
|
*p++ = REG_RD(bp, reg_addrs[i].addr + j*4);
|
|
}
|
|
}
|
|
|
|
/* Read the CAM registers */
|
|
if (bnx2x_is_wreg_in_chip(bp, wreg_addr_p) &&
|
|
IS_REG_IN_PRESET(wreg_addr_p->presets, preset)) {
|
|
for (i = 0; i < wreg_addr_p->size; i++) {
|
|
*p++ = REG_RD(bp, wreg_addr_p->addr + i*4);
|
|
|
|
/* In case of wreg_addr register, read additional
|
|
registers from read_regs array
|
|
*/
|
|
for (j = 0; j < wreg_addr_p->read_regs_count; j++) {
|
|
addr = *(wreg_addr_p->read_regs);
|
|
*p++ = REG_RD(bp, addr + j*4);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Paged registers are supported in E2 & E3 only */
|
|
if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp)) {
|
|
/* Read "paged" registers */
|
|
bnx2x_read_pages_regs(bp, p, preset);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __bnx2x_get_regs(struct bnx2x *bp, u32 *p)
|
|
{
|
|
u32 preset_idx;
|
|
|
|
/* Read all registers, by reading all preset registers */
|
|
for (preset_idx = 1; preset_idx <= DUMP_MAX_PRESETS; preset_idx++) {
|
|
/* Skip presets with IOR */
|
|
if ((preset_idx == 2) ||
|
|
(preset_idx == 5) ||
|
|
(preset_idx == 8) ||
|
|
(preset_idx == 11))
|
|
continue;
|
|
__bnx2x_get_preset_regs(bp, p, preset_idx);
|
|
p += __bnx2x_get_preset_regs_len(bp, preset_idx);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_get_regs(struct net_device *dev,
|
|
struct ethtool_regs *regs, void *_p)
|
|
{
|
|
u32 *p = _p;
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
struct dump_header dump_hdr = {0};
|
|
|
|
regs->version = 2;
|
|
memset(p, 0, regs->len);
|
|
|
|
if (!netif_running(bp->dev))
|
|
return;
|
|
|
|
/* Disable parity attentions as long as following dump may
|
|
* cause false alarms by reading never written registers. We
|
|
* will re-enable parity attentions right after the dump.
|
|
*/
|
|
|
|
bnx2x_disable_blocks_parity(bp);
|
|
|
|
dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1;
|
|
dump_hdr.preset = DUMP_ALL_PRESETS;
|
|
dump_hdr.version = BNX2X_DUMP_VERSION;
|
|
|
|
/* dump_meta_data presents OR of CHIP and PATH. */
|
|
if (CHIP_IS_E1(bp)) {
|
|
dump_hdr.dump_meta_data = DUMP_CHIP_E1;
|
|
} else if (CHIP_IS_E1H(bp)) {
|
|
dump_hdr.dump_meta_data = DUMP_CHIP_E1H;
|
|
} else if (CHIP_IS_E2(bp)) {
|
|
dump_hdr.dump_meta_data = DUMP_CHIP_E2 |
|
|
(BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0);
|
|
} else if (CHIP_IS_E3A0(bp)) {
|
|
dump_hdr.dump_meta_data = DUMP_CHIP_E3A0 |
|
|
(BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0);
|
|
} else if (CHIP_IS_E3B0(bp)) {
|
|
dump_hdr.dump_meta_data = DUMP_CHIP_E3B0 |
|
|
(BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0);
|
|
}
|
|
|
|
memcpy(p, &dump_hdr, sizeof(struct dump_header));
|
|
p += dump_hdr.header_size + 1;
|
|
|
|
/* Actually read the registers */
|
|
__bnx2x_get_regs(bp, p);
|
|
|
|
/* Re-enable parity attentions */
|
|
bnx2x_clear_blocks_parity(bp);
|
|
bnx2x_enable_blocks_parity(bp);
|
|
}
|
|
|
|
static int bnx2x_get_preset_regs_len(struct net_device *dev, u32 preset)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int regdump_len = 0;
|
|
|
|
regdump_len = __bnx2x_get_preset_regs_len(bp, preset);
|
|
regdump_len *= 4;
|
|
regdump_len += sizeof(struct dump_header);
|
|
|
|
return regdump_len;
|
|
}
|
|
|
|
static int bnx2x_set_dump(struct net_device *dev, struct ethtool_dump *val)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
/* Use the ethtool_dump "flag" field as the dump preset index */
|
|
if (val->flag < 1 || val->flag > DUMP_MAX_PRESETS)
|
|
return -EINVAL;
|
|
|
|
bp->dump_preset_idx = val->flag;
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_get_dump_flag(struct net_device *dev,
|
|
struct ethtool_dump *dump)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
dump->version = BNX2X_DUMP_VERSION;
|
|
dump->flag = bp->dump_preset_idx;
|
|
/* Calculate the requested preset idx length */
|
|
dump->len = bnx2x_get_preset_regs_len(dev, bp->dump_preset_idx);
|
|
DP(BNX2X_MSG_ETHTOOL, "Get dump preset %d length=%d\n",
|
|
bp->dump_preset_idx, dump->len);
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_get_dump_data(struct net_device *dev,
|
|
struct ethtool_dump *dump,
|
|
void *buffer)
|
|
{
|
|
u32 *p = buffer;
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
struct dump_header dump_hdr = {0};
|
|
|
|
/* Disable parity attentions as long as following dump may
|
|
* cause false alarms by reading never written registers. We
|
|
* will re-enable parity attentions right after the dump.
|
|
*/
|
|
|
|
bnx2x_disable_blocks_parity(bp);
|
|
|
|
dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1;
|
|
dump_hdr.preset = bp->dump_preset_idx;
|
|
dump_hdr.version = BNX2X_DUMP_VERSION;
|
|
|
|
DP(BNX2X_MSG_ETHTOOL, "Get dump data of preset %d\n", dump_hdr.preset);
|
|
|
|
/* dump_meta_data presents OR of CHIP and PATH. */
|
|
if (CHIP_IS_E1(bp)) {
|
|
dump_hdr.dump_meta_data = DUMP_CHIP_E1;
|
|
} else if (CHIP_IS_E1H(bp)) {
|
|
dump_hdr.dump_meta_data = DUMP_CHIP_E1H;
|
|
} else if (CHIP_IS_E2(bp)) {
|
|
dump_hdr.dump_meta_data = DUMP_CHIP_E2 |
|
|
(BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0);
|
|
} else if (CHIP_IS_E3A0(bp)) {
|
|
dump_hdr.dump_meta_data = DUMP_CHIP_E3A0 |
|
|
(BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0);
|
|
} else if (CHIP_IS_E3B0(bp)) {
|
|
dump_hdr.dump_meta_data = DUMP_CHIP_E3B0 |
|
|
(BP_PATH(bp) ? DUMP_PATH_1 : DUMP_PATH_0);
|
|
}
|
|
|
|
memcpy(p, &dump_hdr, sizeof(struct dump_header));
|
|
p += dump_hdr.header_size + 1;
|
|
|
|
/* Actually read the registers */
|
|
__bnx2x_get_preset_regs(bp, p, dump_hdr.preset);
|
|
|
|
/* Re-enable parity attentions */
|
|
bnx2x_clear_blocks_parity(bp);
|
|
bnx2x_enable_blocks_parity(bp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_get_drvinfo(struct net_device *dev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver));
|
|
strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version));
|
|
|
|
bnx2x_fill_fw_str(bp, info->fw_version, sizeof(info->fw_version));
|
|
|
|
strlcpy(info->bus_info, pci_name(bp->pdev), sizeof(info->bus_info));
|
|
info->n_stats = BNX2X_NUM_STATS;
|
|
info->testinfo_len = BNX2X_NUM_TESTS(bp);
|
|
info->eedump_len = bp->common.flash_size;
|
|
info->regdump_len = bnx2x_get_regs_len(dev);
|
|
}
|
|
|
|
static void bnx2x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
if (bp->flags & NO_WOL_FLAG) {
|
|
wol->supported = 0;
|
|
wol->wolopts = 0;
|
|
} else {
|
|
wol->supported = WAKE_MAGIC;
|
|
if (bp->wol)
|
|
wol->wolopts = WAKE_MAGIC;
|
|
else
|
|
wol->wolopts = 0;
|
|
}
|
|
memset(&wol->sopass, 0, sizeof(wol->sopass));
|
|
}
|
|
|
|
static int bnx2x_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
if (wol->wolopts & ~WAKE_MAGIC) {
|
|
DP(BNX2X_MSG_ETHTOOL, "WOL not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (wol->wolopts & WAKE_MAGIC) {
|
|
if (bp->flags & NO_WOL_FLAG) {
|
|
DP(BNX2X_MSG_ETHTOOL, "WOL not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
bp->wol = 1;
|
|
} else
|
|
bp->wol = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 bnx2x_get_msglevel(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
return bp->msg_enable;
|
|
}
|
|
|
|
static void bnx2x_set_msglevel(struct net_device *dev, u32 level)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
/* dump MCP trace */
|
|
if (IS_PF(bp) && (level & BNX2X_MSG_MCP))
|
|
bnx2x_fw_dump_lvl(bp, KERN_INFO);
|
|
bp->msg_enable = level;
|
|
}
|
|
}
|
|
|
|
static int bnx2x_nway_reset(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
if (!bp->port.pmf)
|
|
return 0;
|
|
|
|
if (netif_running(dev)) {
|
|
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
|
|
bnx2x_force_link_reset(bp);
|
|
bnx2x_link_set(bp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 bnx2x_get_link(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
if (bp->flags & MF_FUNC_DIS || (bp->state != BNX2X_STATE_OPEN))
|
|
return 0;
|
|
|
|
return bp->link_vars.link_up;
|
|
}
|
|
|
|
static int bnx2x_get_eeprom_len(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
return bp->common.flash_size;
|
|
}
|
|
|
|
/* Per pf misc lock must be acquired before the per port mcp lock. Otherwise,
|
|
* had we done things the other way around, if two pfs from the same port would
|
|
* attempt to access nvram at the same time, we could run into a scenario such
|
|
* as:
|
|
* pf A takes the port lock.
|
|
* pf B succeeds in taking the same lock since they are from the same port.
|
|
* pf A takes the per pf misc lock. Performs eeprom access.
|
|
* pf A finishes. Unlocks the per pf misc lock.
|
|
* Pf B takes the lock and proceeds to perform it's own access.
|
|
* pf A unlocks the per port lock, while pf B is still working (!).
|
|
* mcp takes the per port lock and corrupts pf B's access (and/or has it's own
|
|
* access corrupted by pf B)
|
|
*/
|
|
static int bnx2x_acquire_nvram_lock(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
int count, i;
|
|
u32 val;
|
|
|
|
/* acquire HW lock: protect against other PFs in PF Direct Assignment */
|
|
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_NVRAM);
|
|
|
|
/* adjust timeout for emulation/FPGA */
|
|
count = BNX2X_NVRAM_TIMEOUT_COUNT;
|
|
if (CHIP_REV_IS_SLOW(bp))
|
|
count *= 100;
|
|
|
|
/* request access to nvram interface */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB,
|
|
(MCPR_NVM_SW_ARB_ARB_REQ_SET1 << port));
|
|
|
|
for (i = 0; i < count*10; i++) {
|
|
val = REG_RD(bp, MCP_REG_MCPR_NVM_SW_ARB);
|
|
if (val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port))
|
|
break;
|
|
|
|
udelay(5);
|
|
}
|
|
|
|
if (!(val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port))) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"cannot get access to nvram interface\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_release_nvram_lock(struct bnx2x *bp)
|
|
{
|
|
int port = BP_PORT(bp);
|
|
int count, i;
|
|
u32 val;
|
|
|
|
/* adjust timeout for emulation/FPGA */
|
|
count = BNX2X_NVRAM_TIMEOUT_COUNT;
|
|
if (CHIP_REV_IS_SLOW(bp))
|
|
count *= 100;
|
|
|
|
/* relinquish nvram interface */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB,
|
|
(MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << port));
|
|
|
|
for (i = 0; i < count*10; i++) {
|
|
val = REG_RD(bp, MCP_REG_MCPR_NVM_SW_ARB);
|
|
if (!(val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port)))
|
|
break;
|
|
|
|
udelay(5);
|
|
}
|
|
|
|
if (val & (MCPR_NVM_SW_ARB_ARB_ARB1 << port)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"cannot free access to nvram interface\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* release HW lock: protect against other PFs in PF Direct Assignment */
|
|
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_NVRAM);
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_enable_nvram_access(struct bnx2x *bp)
|
|
{
|
|
u32 val;
|
|
|
|
val = REG_RD(bp, MCP_REG_MCPR_NVM_ACCESS_ENABLE);
|
|
|
|
/* enable both bits, even on read */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_ACCESS_ENABLE,
|
|
(val | MCPR_NVM_ACCESS_ENABLE_EN |
|
|
MCPR_NVM_ACCESS_ENABLE_WR_EN));
|
|
}
|
|
|
|
static void bnx2x_disable_nvram_access(struct bnx2x *bp)
|
|
{
|
|
u32 val;
|
|
|
|
val = REG_RD(bp, MCP_REG_MCPR_NVM_ACCESS_ENABLE);
|
|
|
|
/* disable both bits, even after read */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_ACCESS_ENABLE,
|
|
(val & ~(MCPR_NVM_ACCESS_ENABLE_EN |
|
|
MCPR_NVM_ACCESS_ENABLE_WR_EN)));
|
|
}
|
|
|
|
static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, __be32 *ret_val,
|
|
u32 cmd_flags)
|
|
{
|
|
int count, i, rc;
|
|
u32 val;
|
|
|
|
/* build the command word */
|
|
cmd_flags |= MCPR_NVM_COMMAND_DOIT;
|
|
|
|
/* need to clear DONE bit separately */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_COMMAND, MCPR_NVM_COMMAND_DONE);
|
|
|
|
/* address of the NVRAM to read from */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_ADDR,
|
|
(offset & MCPR_NVM_ADDR_NVM_ADDR_VALUE));
|
|
|
|
/* issue a read command */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_COMMAND, cmd_flags);
|
|
|
|
/* adjust timeout for emulation/FPGA */
|
|
count = BNX2X_NVRAM_TIMEOUT_COUNT;
|
|
if (CHIP_REV_IS_SLOW(bp))
|
|
count *= 100;
|
|
|
|
/* wait for completion */
|
|
*ret_val = 0;
|
|
rc = -EBUSY;
|
|
for (i = 0; i < count; i++) {
|
|
udelay(5);
|
|
val = REG_RD(bp, MCP_REG_MCPR_NVM_COMMAND);
|
|
|
|
if (val & MCPR_NVM_COMMAND_DONE) {
|
|
val = REG_RD(bp, MCP_REG_MCPR_NVM_READ);
|
|
/* we read nvram data in cpu order
|
|
* but ethtool sees it as an array of bytes
|
|
* converting to big-endian will do the work
|
|
*/
|
|
*ret_val = cpu_to_be32(val);
|
|
rc = 0;
|
|
break;
|
|
}
|
|
}
|
|
if (rc == -EBUSY)
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"nvram read timeout expired\n");
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_nvram_read(struct bnx2x *bp, u32 offset, u8 *ret_buf,
|
|
int buf_size)
|
|
{
|
|
int rc;
|
|
u32 cmd_flags;
|
|
__be32 val;
|
|
|
|
if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"Invalid parameter: offset 0x%x buf_size 0x%x\n",
|
|
offset, buf_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (offset + buf_size > bp->common.flash_size) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"Invalid parameter: offset (0x%x) + buf_size (0x%x) > flash_size (0x%x)\n",
|
|
offset, buf_size, bp->common.flash_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* request access to nvram interface */
|
|
rc = bnx2x_acquire_nvram_lock(bp);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* enable access to nvram interface */
|
|
bnx2x_enable_nvram_access(bp);
|
|
|
|
/* read the first word(s) */
|
|
cmd_flags = MCPR_NVM_COMMAND_FIRST;
|
|
while ((buf_size > sizeof(u32)) && (rc == 0)) {
|
|
rc = bnx2x_nvram_read_dword(bp, offset, &val, cmd_flags);
|
|
memcpy(ret_buf, &val, 4);
|
|
|
|
/* advance to the next dword */
|
|
offset += sizeof(u32);
|
|
ret_buf += sizeof(u32);
|
|
buf_size -= sizeof(u32);
|
|
cmd_flags = 0;
|
|
}
|
|
|
|
if (rc == 0) {
|
|
cmd_flags |= MCPR_NVM_COMMAND_LAST;
|
|
rc = bnx2x_nvram_read_dword(bp, offset, &val, cmd_flags);
|
|
memcpy(ret_buf, &val, 4);
|
|
}
|
|
|
|
/* disable access to nvram interface */
|
|
bnx2x_disable_nvram_access(bp);
|
|
bnx2x_release_nvram_lock(bp);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_nvram_read32(struct bnx2x *bp, u32 offset, u32 *buf,
|
|
int buf_size)
|
|
{
|
|
int rc;
|
|
|
|
rc = bnx2x_nvram_read(bp, offset, (u8 *)buf, buf_size);
|
|
|
|
if (!rc) {
|
|
__be32 *be = (__be32 *)buf;
|
|
|
|
while ((buf_size -= 4) >= 0)
|
|
*buf++ = be32_to_cpu(*be++);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static bool bnx2x_is_nvm_accessible(struct bnx2x *bp)
|
|
{
|
|
int rc = 1;
|
|
u16 pm = 0;
|
|
struct net_device *dev = pci_get_drvdata(bp->pdev);
|
|
|
|
if (bp->pdev->pm_cap)
|
|
rc = pci_read_config_word(bp->pdev,
|
|
bp->pdev->pm_cap + PCI_PM_CTRL, &pm);
|
|
|
|
if ((rc && !netif_running(dev)) ||
|
|
(!rc && ((pm & PCI_PM_CTRL_STATE_MASK) != (__force u16)PCI_D0)))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int bnx2x_get_eeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eeprom, u8 *eebuf)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
if (!bnx2x_is_nvm_accessible(bp)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"cannot access eeprom when the interface is down\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n"
|
|
" magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n",
|
|
eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset,
|
|
eeprom->len, eeprom->len);
|
|
|
|
/* parameters already validated in ethtool_get_eeprom */
|
|
|
|
return bnx2x_nvram_read(bp, eeprom->offset, eebuf, eeprom->len);
|
|
}
|
|
|
|
static int bnx2x_get_module_eeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *ee,
|
|
u8 *data)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int rc = -EINVAL, phy_idx;
|
|
u8 *user_data = data;
|
|
unsigned int start_addr = ee->offset, xfer_size = 0;
|
|
|
|
if (!bnx2x_is_nvm_accessible(bp)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"cannot access eeprom when the interface is down\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
phy_idx = bnx2x_get_cur_phy_idx(bp);
|
|
|
|
/* Read A0 section */
|
|
if (start_addr < ETH_MODULE_SFF_8079_LEN) {
|
|
/* Limit transfer size to the A0 section boundary */
|
|
if (start_addr + ee->len > ETH_MODULE_SFF_8079_LEN)
|
|
xfer_size = ETH_MODULE_SFF_8079_LEN - start_addr;
|
|
else
|
|
xfer_size = ee->len;
|
|
bnx2x_acquire_phy_lock(bp);
|
|
rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx],
|
|
&bp->link_params,
|
|
I2C_DEV_ADDR_A0,
|
|
start_addr,
|
|
xfer_size,
|
|
user_data);
|
|
bnx2x_release_phy_lock(bp);
|
|
if (rc) {
|
|
DP(BNX2X_MSG_ETHTOOL, "Failed reading A0 section\n");
|
|
|
|
return -EINVAL;
|
|
}
|
|
user_data += xfer_size;
|
|
start_addr += xfer_size;
|
|
}
|
|
|
|
/* Read A2 section */
|
|
if ((start_addr >= ETH_MODULE_SFF_8079_LEN) &&
|
|
(start_addr < ETH_MODULE_SFF_8472_LEN)) {
|
|
xfer_size = ee->len - xfer_size;
|
|
/* Limit transfer size to the A2 section boundary */
|
|
if (start_addr + xfer_size > ETH_MODULE_SFF_8472_LEN)
|
|
xfer_size = ETH_MODULE_SFF_8472_LEN - start_addr;
|
|
start_addr -= ETH_MODULE_SFF_8079_LEN;
|
|
bnx2x_acquire_phy_lock(bp);
|
|
rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx],
|
|
&bp->link_params,
|
|
I2C_DEV_ADDR_A2,
|
|
start_addr,
|
|
xfer_size,
|
|
user_data);
|
|
bnx2x_release_phy_lock(bp);
|
|
if (rc) {
|
|
DP(BNX2X_MSG_ETHTOOL, "Failed reading A2 section\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_get_module_info(struct net_device *dev,
|
|
struct ethtool_modinfo *modinfo)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int phy_idx, rc;
|
|
u8 sff8472_comp, diag_type;
|
|
|
|
if (!bnx2x_is_nvm_accessible(bp)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"cannot access eeprom when the interface is down\n");
|
|
return -EAGAIN;
|
|
}
|
|
phy_idx = bnx2x_get_cur_phy_idx(bp);
|
|
bnx2x_acquire_phy_lock(bp);
|
|
rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx],
|
|
&bp->link_params,
|
|
I2C_DEV_ADDR_A0,
|
|
SFP_EEPROM_SFF_8472_COMP_ADDR,
|
|
SFP_EEPROM_SFF_8472_COMP_SIZE,
|
|
&sff8472_comp);
|
|
bnx2x_release_phy_lock(bp);
|
|
if (rc) {
|
|
DP(BNX2X_MSG_ETHTOOL, "Failed reading SFF-8472 comp field\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
bnx2x_acquire_phy_lock(bp);
|
|
rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx],
|
|
&bp->link_params,
|
|
I2C_DEV_ADDR_A0,
|
|
SFP_EEPROM_DIAG_TYPE_ADDR,
|
|
SFP_EEPROM_DIAG_TYPE_SIZE,
|
|
&diag_type);
|
|
bnx2x_release_phy_lock(bp);
|
|
if (rc) {
|
|
DP(BNX2X_MSG_ETHTOOL, "Failed reading Diag Type field\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!sff8472_comp ||
|
|
(diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ)) {
|
|
modinfo->type = ETH_MODULE_SFF_8079;
|
|
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
|
|
} else {
|
|
modinfo->type = ETH_MODULE_SFF_8472;
|
|
modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val,
|
|
u32 cmd_flags)
|
|
{
|
|
int count, i, rc;
|
|
|
|
/* build the command word */
|
|
cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR;
|
|
|
|
/* need to clear DONE bit separately */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_COMMAND, MCPR_NVM_COMMAND_DONE);
|
|
|
|
/* write the data */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_WRITE, val);
|
|
|
|
/* address of the NVRAM to write to */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_ADDR,
|
|
(offset & MCPR_NVM_ADDR_NVM_ADDR_VALUE));
|
|
|
|
/* issue the write command */
|
|
REG_WR(bp, MCP_REG_MCPR_NVM_COMMAND, cmd_flags);
|
|
|
|
/* adjust timeout for emulation/FPGA */
|
|
count = BNX2X_NVRAM_TIMEOUT_COUNT;
|
|
if (CHIP_REV_IS_SLOW(bp))
|
|
count *= 100;
|
|
|
|
/* wait for completion */
|
|
rc = -EBUSY;
|
|
for (i = 0; i < count; i++) {
|
|
udelay(5);
|
|
val = REG_RD(bp, MCP_REG_MCPR_NVM_COMMAND);
|
|
if (val & MCPR_NVM_COMMAND_DONE) {
|
|
rc = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (rc == -EBUSY)
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"nvram write timeout expired\n");
|
|
return rc;
|
|
}
|
|
|
|
#define BYTE_OFFSET(offset) (8 * (offset & 0x03))
|
|
|
|
static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf,
|
|
int buf_size)
|
|
{
|
|
int rc;
|
|
u32 cmd_flags, align_offset, val;
|
|
__be32 val_be;
|
|
|
|
if (offset + buf_size > bp->common.flash_size) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"Invalid parameter: offset (0x%x) + buf_size (0x%x) > flash_size (0x%x)\n",
|
|
offset, buf_size, bp->common.flash_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* request access to nvram interface */
|
|
rc = bnx2x_acquire_nvram_lock(bp);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* enable access to nvram interface */
|
|
bnx2x_enable_nvram_access(bp);
|
|
|
|
cmd_flags = (MCPR_NVM_COMMAND_FIRST | MCPR_NVM_COMMAND_LAST);
|
|
align_offset = (offset & ~0x03);
|
|
rc = bnx2x_nvram_read_dword(bp, align_offset, &val_be, cmd_flags);
|
|
|
|
if (rc == 0) {
|
|
/* nvram data is returned as an array of bytes
|
|
* convert it back to cpu order
|
|
*/
|
|
val = be32_to_cpu(val_be);
|
|
|
|
val &= ~le32_to_cpu((__force __le32)
|
|
(0xff << BYTE_OFFSET(offset)));
|
|
val |= le32_to_cpu((__force __le32)
|
|
(*data_buf << BYTE_OFFSET(offset)));
|
|
|
|
rc = bnx2x_nvram_write_dword(bp, align_offset, val,
|
|
cmd_flags);
|
|
}
|
|
|
|
/* disable access to nvram interface */
|
|
bnx2x_disable_nvram_access(bp);
|
|
bnx2x_release_nvram_lock(bp);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_nvram_write(struct bnx2x *bp, u32 offset, u8 *data_buf,
|
|
int buf_size)
|
|
{
|
|
int rc;
|
|
u32 cmd_flags;
|
|
u32 val;
|
|
u32 written_so_far;
|
|
|
|
if (buf_size == 1) /* ethtool */
|
|
return bnx2x_nvram_write1(bp, offset, data_buf, buf_size);
|
|
|
|
if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"Invalid parameter: offset 0x%x buf_size 0x%x\n",
|
|
offset, buf_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (offset + buf_size > bp->common.flash_size) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"Invalid parameter: offset (0x%x) + buf_size (0x%x) > flash_size (0x%x)\n",
|
|
offset, buf_size, bp->common.flash_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* request access to nvram interface */
|
|
rc = bnx2x_acquire_nvram_lock(bp);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* enable access to nvram interface */
|
|
bnx2x_enable_nvram_access(bp);
|
|
|
|
written_so_far = 0;
|
|
cmd_flags = MCPR_NVM_COMMAND_FIRST;
|
|
while ((written_so_far < buf_size) && (rc == 0)) {
|
|
if (written_so_far == (buf_size - sizeof(u32)))
|
|
cmd_flags |= MCPR_NVM_COMMAND_LAST;
|
|
else if (((offset + 4) % BNX2X_NVRAM_PAGE_SIZE) == 0)
|
|
cmd_flags |= MCPR_NVM_COMMAND_LAST;
|
|
else if ((offset % BNX2X_NVRAM_PAGE_SIZE) == 0)
|
|
cmd_flags |= MCPR_NVM_COMMAND_FIRST;
|
|
|
|
memcpy(&val, data_buf, 4);
|
|
|
|
/* Notice unlike bnx2x_nvram_read_dword() this will not
|
|
* change val using be32_to_cpu(), which causes data to flip
|
|
* if the eeprom is read and then written back. This is due
|
|
* to tools utilizing this functionality that would break
|
|
* if this would be resolved.
|
|
*/
|
|
rc = bnx2x_nvram_write_dword(bp, offset, val, cmd_flags);
|
|
|
|
/* advance to the next dword */
|
|
offset += sizeof(u32);
|
|
data_buf += sizeof(u32);
|
|
written_so_far += sizeof(u32);
|
|
cmd_flags = 0;
|
|
}
|
|
|
|
/* disable access to nvram interface */
|
|
bnx2x_disable_nvram_access(bp);
|
|
bnx2x_release_nvram_lock(bp);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_set_eeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eeprom, u8 *eebuf)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int port = BP_PORT(bp);
|
|
int rc = 0;
|
|
u32 ext_phy_config;
|
|
|
|
if (!bnx2x_is_nvm_accessible(bp)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"cannot access eeprom when the interface is down\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n"
|
|
" magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n",
|
|
eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset,
|
|
eeprom->len, eeprom->len);
|
|
|
|
/* parameters already validated in ethtool_set_eeprom */
|
|
|
|
/* PHY eeprom can be accessed only by the PMF */
|
|
if ((eeprom->magic >= 0x50485900) && (eeprom->magic <= 0x504859FF) &&
|
|
!bp->port.pmf) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"wrong magic or interface is not pmf\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ext_phy_config =
|
|
SHMEM_RD(bp,
|
|
dev_info.port_hw_config[port].external_phy_config);
|
|
|
|
if (eeprom->magic == 0x50485950) {
|
|
/* 'PHYP' (0x50485950): prepare phy for FW upgrade */
|
|
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
|
|
|
|
bnx2x_acquire_phy_lock(bp);
|
|
rc |= bnx2x_link_reset(&bp->link_params,
|
|
&bp->link_vars, 0);
|
|
if (XGXS_EXT_PHY_TYPE(ext_phy_config) ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101)
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
|
|
MISC_REGISTERS_GPIO_HIGH, port);
|
|
bnx2x_release_phy_lock(bp);
|
|
bnx2x_link_report(bp);
|
|
|
|
} else if (eeprom->magic == 0x50485952) {
|
|
/* 'PHYR' (0x50485952): re-init link after FW upgrade */
|
|
if (bp->state == BNX2X_STATE_OPEN) {
|
|
bnx2x_acquire_phy_lock(bp);
|
|
rc |= bnx2x_link_reset(&bp->link_params,
|
|
&bp->link_vars, 1);
|
|
|
|
rc |= bnx2x_phy_init(&bp->link_params,
|
|
&bp->link_vars);
|
|
bnx2x_release_phy_lock(bp);
|
|
bnx2x_calc_fc_adv(bp);
|
|
}
|
|
} else if (eeprom->magic == 0x53985943) {
|
|
/* 'PHYC' (0x53985943): PHY FW upgrade completed */
|
|
if (XGXS_EXT_PHY_TYPE(ext_phy_config) ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) {
|
|
|
|
/* DSP Remove Download Mode */
|
|
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
|
|
MISC_REGISTERS_GPIO_LOW, port);
|
|
|
|
bnx2x_acquire_phy_lock(bp);
|
|
|
|
bnx2x_sfx7101_sp_sw_reset(bp,
|
|
&bp->link_params.phy[EXT_PHY1]);
|
|
|
|
/* wait 0.5 sec to allow it to run */
|
|
msleep(500);
|
|
bnx2x_ext_phy_hw_reset(bp, port);
|
|
msleep(500);
|
|
bnx2x_release_phy_lock(bp);
|
|
}
|
|
} else
|
|
rc = bnx2x_nvram_write(bp, eeprom->offset, eebuf, eeprom->len);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_get_coalesce(struct net_device *dev,
|
|
struct ethtool_coalesce *coal)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
memset(coal, 0, sizeof(struct ethtool_coalesce));
|
|
|
|
coal->rx_coalesce_usecs = bp->rx_ticks;
|
|
coal->tx_coalesce_usecs = bp->tx_ticks;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_set_coalesce(struct net_device *dev,
|
|
struct ethtool_coalesce *coal)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
bp->rx_ticks = (u16)coal->rx_coalesce_usecs;
|
|
if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT)
|
|
bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT;
|
|
|
|
bp->tx_ticks = (u16)coal->tx_coalesce_usecs;
|
|
if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT)
|
|
bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT;
|
|
|
|
if (netif_running(dev))
|
|
bnx2x_update_coalesce(bp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_get_ringparam(struct net_device *dev,
|
|
struct ethtool_ringparam *ering)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
ering->rx_max_pending = MAX_RX_AVAIL;
|
|
|
|
if (bp->rx_ring_size)
|
|
ering->rx_pending = bp->rx_ring_size;
|
|
else
|
|
ering->rx_pending = MAX_RX_AVAIL;
|
|
|
|
ering->tx_max_pending = IS_MF_FCOE_AFEX(bp) ? 0 : MAX_TX_AVAIL;
|
|
ering->tx_pending = bp->tx_ring_size;
|
|
}
|
|
|
|
static int bnx2x_set_ringparam(struct net_device *dev,
|
|
struct ethtool_ringparam *ering)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"set ring params command parameters: rx_pending = %d, tx_pending = %d\n",
|
|
ering->rx_pending, ering->tx_pending);
|
|
|
|
if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Handling parity error recovery. Try again later\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if ((ering->rx_pending > MAX_RX_AVAIL) ||
|
|
(ering->rx_pending < (bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
|
|
MIN_RX_SIZE_TPA)) ||
|
|
(ering->tx_pending > (IS_MF_FCOE_AFEX(bp) ? 0 : MAX_TX_AVAIL)) ||
|
|
(ering->tx_pending <= MAX_SKB_FRAGS + 4)) {
|
|
DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
bp->rx_ring_size = ering->rx_pending;
|
|
bp->tx_ring_size = ering->tx_pending;
|
|
|
|
return bnx2x_reload_if_running(dev);
|
|
}
|
|
|
|
static void bnx2x_get_pauseparam(struct net_device *dev,
|
|
struct ethtool_pauseparam *epause)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int cfg_idx = bnx2x_get_link_cfg_idx(bp);
|
|
int cfg_reg;
|
|
|
|
epause->autoneg = (bp->link_params.req_flow_ctrl[cfg_idx] ==
|
|
BNX2X_FLOW_CTRL_AUTO);
|
|
|
|
if (!epause->autoneg)
|
|
cfg_reg = bp->link_params.req_flow_ctrl[cfg_idx];
|
|
else
|
|
cfg_reg = bp->link_params.req_fc_auto_adv;
|
|
|
|
epause->rx_pause = ((cfg_reg & BNX2X_FLOW_CTRL_RX) ==
|
|
BNX2X_FLOW_CTRL_RX);
|
|
epause->tx_pause = ((cfg_reg & BNX2X_FLOW_CTRL_TX) ==
|
|
BNX2X_FLOW_CTRL_TX);
|
|
|
|
DP(BNX2X_MSG_ETHTOOL, "ethtool_pauseparam: cmd %d\n"
|
|
" autoneg %d rx_pause %d tx_pause %d\n",
|
|
epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
|
|
}
|
|
|
|
static int bnx2x_set_pauseparam(struct net_device *dev,
|
|
struct ethtool_pauseparam *epause)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
u32 cfg_idx = bnx2x_get_link_cfg_idx(bp);
|
|
if (IS_MF(bp))
|
|
return 0;
|
|
|
|
DP(BNX2X_MSG_ETHTOOL, "ethtool_pauseparam: cmd %d\n"
|
|
" autoneg %d rx_pause %d tx_pause %d\n",
|
|
epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
|
|
|
|
bp->link_params.req_flow_ctrl[cfg_idx] = BNX2X_FLOW_CTRL_AUTO;
|
|
|
|
if (epause->rx_pause)
|
|
bp->link_params.req_flow_ctrl[cfg_idx] |= BNX2X_FLOW_CTRL_RX;
|
|
|
|
if (epause->tx_pause)
|
|
bp->link_params.req_flow_ctrl[cfg_idx] |= BNX2X_FLOW_CTRL_TX;
|
|
|
|
if (bp->link_params.req_flow_ctrl[cfg_idx] == BNX2X_FLOW_CTRL_AUTO)
|
|
bp->link_params.req_flow_ctrl[cfg_idx] = BNX2X_FLOW_CTRL_NONE;
|
|
|
|
if (epause->autoneg) {
|
|
if (!(bp->port.supported[cfg_idx] & SUPPORTED_Autoneg)) {
|
|
DP(BNX2X_MSG_ETHTOOL, "autoneg not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (bp->link_params.req_line_speed[cfg_idx] == SPEED_AUTO_NEG) {
|
|
bp->link_params.req_flow_ctrl[cfg_idx] =
|
|
BNX2X_FLOW_CTRL_AUTO;
|
|
}
|
|
bp->link_params.req_fc_auto_adv = 0;
|
|
if (epause->rx_pause)
|
|
bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_RX;
|
|
|
|
if (epause->tx_pause)
|
|
bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_TX;
|
|
|
|
if (!bp->link_params.req_fc_auto_adv)
|
|
bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_NONE;
|
|
}
|
|
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"req_flow_ctrl 0x%x\n", bp->link_params.req_flow_ctrl[cfg_idx]);
|
|
|
|
if (netif_running(dev)) {
|
|
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
|
|
bnx2x_link_set(bp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char bnx2x_tests_str_arr[BNX2X_NUM_TESTS_SF][ETH_GSTRING_LEN] = {
|
|
"register_test (offline) ",
|
|
"memory_test (offline) ",
|
|
"int_loopback_test (offline)",
|
|
"ext_loopback_test (offline)",
|
|
"nvram_test (online) ",
|
|
"interrupt_test (online) ",
|
|
"link_test (online) "
|
|
};
|
|
|
|
enum {
|
|
BNX2X_PRI_FLAG_ISCSI,
|
|
BNX2X_PRI_FLAG_FCOE,
|
|
BNX2X_PRI_FLAG_STORAGE,
|
|
BNX2X_PRI_FLAG_LEN,
|
|
};
|
|
|
|
static const char bnx2x_private_arr[BNX2X_PRI_FLAG_LEN][ETH_GSTRING_LEN] = {
|
|
"iSCSI offload support",
|
|
"FCoE offload support",
|
|
"Storage only interface"
|
|
};
|
|
|
|
static u32 bnx2x_eee_to_adv(u32 eee_adv)
|
|
{
|
|
u32 modes = 0;
|
|
|
|
if (eee_adv & SHMEM_EEE_100M_ADV)
|
|
modes |= ADVERTISED_100baseT_Full;
|
|
if (eee_adv & SHMEM_EEE_1G_ADV)
|
|
modes |= ADVERTISED_1000baseT_Full;
|
|
if (eee_adv & SHMEM_EEE_10G_ADV)
|
|
modes |= ADVERTISED_10000baseT_Full;
|
|
|
|
return modes;
|
|
}
|
|
|
|
static u32 bnx2x_adv_to_eee(u32 modes, u32 shift)
|
|
{
|
|
u32 eee_adv = 0;
|
|
if (modes & ADVERTISED_100baseT_Full)
|
|
eee_adv |= SHMEM_EEE_100M_ADV;
|
|
if (modes & ADVERTISED_1000baseT_Full)
|
|
eee_adv |= SHMEM_EEE_1G_ADV;
|
|
if (modes & ADVERTISED_10000baseT_Full)
|
|
eee_adv |= SHMEM_EEE_10G_ADV;
|
|
|
|
return eee_adv << shift;
|
|
}
|
|
|
|
static int bnx2x_get_eee(struct net_device *dev, struct ethtool_eee *edata)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
u32 eee_cfg;
|
|
|
|
if (!SHMEM2_HAS(bp, eee_status[BP_PORT(bp)])) {
|
|
DP(BNX2X_MSG_ETHTOOL, "BC Version does not support EEE\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
eee_cfg = bp->link_vars.eee_status;
|
|
|
|
edata->supported =
|
|
bnx2x_eee_to_adv((eee_cfg & SHMEM_EEE_SUPPORTED_MASK) >>
|
|
SHMEM_EEE_SUPPORTED_SHIFT);
|
|
|
|
edata->advertised =
|
|
bnx2x_eee_to_adv((eee_cfg & SHMEM_EEE_ADV_STATUS_MASK) >>
|
|
SHMEM_EEE_ADV_STATUS_SHIFT);
|
|
edata->lp_advertised =
|
|
bnx2x_eee_to_adv((eee_cfg & SHMEM_EEE_LP_ADV_STATUS_MASK) >>
|
|
SHMEM_EEE_LP_ADV_STATUS_SHIFT);
|
|
|
|
/* SHMEM value is in 16u units --> Convert to 1u units. */
|
|
edata->tx_lpi_timer = (eee_cfg & SHMEM_EEE_TIMER_MASK) << 4;
|
|
|
|
edata->eee_enabled = (eee_cfg & SHMEM_EEE_REQUESTED_BIT) ? 1 : 0;
|
|
edata->eee_active = (eee_cfg & SHMEM_EEE_ACTIVE_BIT) ? 1 : 0;
|
|
edata->tx_lpi_enabled = (eee_cfg & SHMEM_EEE_LPI_REQUESTED_BIT) ? 1 : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_set_eee(struct net_device *dev, struct ethtool_eee *edata)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
u32 eee_cfg;
|
|
u32 advertised;
|
|
|
|
if (IS_MF(bp))
|
|
return 0;
|
|
|
|
if (!SHMEM2_HAS(bp, eee_status[BP_PORT(bp)])) {
|
|
DP(BNX2X_MSG_ETHTOOL, "BC Version does not support EEE\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
eee_cfg = bp->link_vars.eee_status;
|
|
|
|
if (!(eee_cfg & SHMEM_EEE_SUPPORTED_MASK)) {
|
|
DP(BNX2X_MSG_ETHTOOL, "Board does not support EEE!\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
advertised = bnx2x_adv_to_eee(edata->advertised,
|
|
SHMEM_EEE_ADV_STATUS_SHIFT);
|
|
if ((advertised != (eee_cfg & SHMEM_EEE_ADV_STATUS_MASK))) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Direct manipulation of EEE advertisement is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (edata->tx_lpi_timer > EEE_MODE_TIMER_MASK) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Maximal Tx Lpi timer supported is %x(u)\n",
|
|
EEE_MODE_TIMER_MASK);
|
|
return -EINVAL;
|
|
}
|
|
if (edata->tx_lpi_enabled &&
|
|
(edata->tx_lpi_timer < EEE_MODE_NVRAM_AGGRESSIVE_TIME)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Minimal Tx Lpi timer supported is %d(u)\n",
|
|
EEE_MODE_NVRAM_AGGRESSIVE_TIME);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* All is well; Apply changes*/
|
|
if (edata->eee_enabled)
|
|
bp->link_params.eee_mode |= EEE_MODE_ADV_LPI;
|
|
else
|
|
bp->link_params.eee_mode &= ~EEE_MODE_ADV_LPI;
|
|
|
|
if (edata->tx_lpi_enabled)
|
|
bp->link_params.eee_mode |= EEE_MODE_ENABLE_LPI;
|
|
else
|
|
bp->link_params.eee_mode &= ~EEE_MODE_ENABLE_LPI;
|
|
|
|
bp->link_params.eee_mode &= ~EEE_MODE_TIMER_MASK;
|
|
bp->link_params.eee_mode |= (edata->tx_lpi_timer &
|
|
EEE_MODE_TIMER_MASK) |
|
|
EEE_MODE_OVERRIDE_NVRAM |
|
|
EEE_MODE_OUTPUT_TIME;
|
|
|
|
/* Restart link to propagate changes */
|
|
if (netif_running(dev)) {
|
|
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
|
|
bnx2x_force_link_reset(bp);
|
|
bnx2x_link_set(bp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
enum {
|
|
BNX2X_CHIP_E1_OFST = 0,
|
|
BNX2X_CHIP_E1H_OFST,
|
|
BNX2X_CHIP_E2_OFST,
|
|
BNX2X_CHIP_E3_OFST,
|
|
BNX2X_CHIP_E3B0_OFST,
|
|
BNX2X_CHIP_MAX_OFST
|
|
};
|
|
|
|
#define BNX2X_CHIP_MASK_E1 (1 << BNX2X_CHIP_E1_OFST)
|
|
#define BNX2X_CHIP_MASK_E1H (1 << BNX2X_CHIP_E1H_OFST)
|
|
#define BNX2X_CHIP_MASK_E2 (1 << BNX2X_CHIP_E2_OFST)
|
|
#define BNX2X_CHIP_MASK_E3 (1 << BNX2X_CHIP_E3_OFST)
|
|
#define BNX2X_CHIP_MASK_E3B0 (1 << BNX2X_CHIP_E3B0_OFST)
|
|
|
|
#define BNX2X_CHIP_MASK_ALL ((1 << BNX2X_CHIP_MAX_OFST) - 1)
|
|
#define BNX2X_CHIP_MASK_E1X (BNX2X_CHIP_MASK_E1 | BNX2X_CHIP_MASK_E1H)
|
|
|
|
static int bnx2x_test_registers(struct bnx2x *bp)
|
|
{
|
|
int idx, i, rc = -ENODEV;
|
|
u32 wr_val = 0, hw;
|
|
int port = BP_PORT(bp);
|
|
static const struct {
|
|
u32 hw;
|
|
u32 offset0;
|
|
u32 offset1;
|
|
u32 mask;
|
|
} reg_tbl[] = {
|
|
/* 0 */ { BNX2X_CHIP_MASK_ALL,
|
|
BRB1_REG_PAUSE_LOW_THRESHOLD_0, 4, 0x000003ff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
DORQ_REG_DB_ADDR0, 4, 0xffffffff },
|
|
{ BNX2X_CHIP_MASK_E1X,
|
|
HC_REG_AGG_INT_0, 4, 0x000003ff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
PBF_REG_MAC_IF0_ENABLE, 4, 0x00000001 },
|
|
{ BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2 | BNX2X_CHIP_MASK_E3,
|
|
PBF_REG_P0_INIT_CRD, 4, 0x000007ff },
|
|
{ BNX2X_CHIP_MASK_E3B0,
|
|
PBF_REG_INIT_CRD_Q0, 4, 0x000007ff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
PRS_REG_CID_PORT_0, 4, 0x00ffffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
PXP2_REG_PSWRQ_CDU0_L2P, 4, 0x000fffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR, 8, 0x0003ffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
PXP2_REG_PSWRQ_TM0_L2P, 4, 0x000fffff },
|
|
/* 10 */ { BNX2X_CHIP_MASK_ALL,
|
|
PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR, 8, 0x0003ffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
PXP2_REG_PSWRQ_TSDM0_L2P, 4, 0x000fffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
QM_REG_CONNNUM_0, 4, 0x000fffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
TM_REG_LIN0_MAX_ACTIVE_CID, 4, 0x0003ffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
SRC_REG_KEYRSS0_0, 40, 0xffffffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
SRC_REG_KEYRSS0_7, 40, 0xffffffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 4, 0x00000001 },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
XCM_REG_WU_DA_CNT_CMD00, 4, 0x00000003 },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 4, 0x000000ff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LLH0_T_BIT, 4, 0x00000001 },
|
|
/* 20 */ { BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2,
|
|
NIG_REG_EMAC0_IN_EN, 4, 0x00000001 },
|
|
{ BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2,
|
|
NIG_REG_BMAC0_IN_EN, 4, 0x00000001 },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_XCM0_OUT_EN, 4, 0x00000001 },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_BRB0_OUT_EN, 4, 0x00000001 },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LLH0_XCM_MASK, 4, 0x00000007 },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LLH0_ACPI_PAT_6_LEN, 68, 0x000000ff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LLH0_ACPI_PAT_0_CRC, 68, 0xffffffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LLH0_DEST_MAC_0_0, 160, 0xffffffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LLH0_DEST_IP_0_1, 160, 0xffffffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LLH0_IPV4_IPV6_0, 160, 0x00000001 },
|
|
/* 30 */ { BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LLH0_DEST_UDP_0, 160, 0x0000ffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LLH0_DEST_TCP_0, 160, 0x0000ffff },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LLH0_VLAN_ID_0, 160, 0x00000fff },
|
|
{ BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2,
|
|
NIG_REG_XGXS_SERDES0_MODE_SEL, 4, 0x00000001 },
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0, 4, 0x00000001},
|
|
{ BNX2X_CHIP_MASK_ALL,
|
|
NIG_REG_STATUS_INTERRUPT_PORT0, 4, 0x07ffffff },
|
|
{ BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2,
|
|
NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST, 24, 0x00000001 },
|
|
{ BNX2X_CHIP_MASK_E1X | BNX2X_CHIP_MASK_E2,
|
|
NIG_REG_SERDES0_CTRL_PHY_ADDR, 16, 0x0000001f },
|
|
|
|
{ BNX2X_CHIP_MASK_ALL, 0xffffffff, 0, 0x00000000 }
|
|
};
|
|
|
|
if (!bnx2x_is_nvm_accessible(bp)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"cannot access eeprom when the interface is down\n");
|
|
return rc;
|
|
}
|
|
|
|
if (CHIP_IS_E1(bp))
|
|
hw = BNX2X_CHIP_MASK_E1;
|
|
else if (CHIP_IS_E1H(bp))
|
|
hw = BNX2X_CHIP_MASK_E1H;
|
|
else if (CHIP_IS_E2(bp))
|
|
hw = BNX2X_CHIP_MASK_E2;
|
|
else if (CHIP_IS_E3B0(bp))
|
|
hw = BNX2X_CHIP_MASK_E3B0;
|
|
else /* e3 A0 */
|
|
hw = BNX2X_CHIP_MASK_E3;
|
|
|
|
/* Repeat the test twice:
|
|
* First by writing 0x00000000, second by writing 0xffffffff
|
|
*/
|
|
for (idx = 0; idx < 2; idx++) {
|
|
|
|
switch (idx) {
|
|
case 0:
|
|
wr_val = 0;
|
|
break;
|
|
case 1:
|
|
wr_val = 0xffffffff;
|
|
break;
|
|
}
|
|
|
|
for (i = 0; reg_tbl[i].offset0 != 0xffffffff; i++) {
|
|
u32 offset, mask, save_val, val;
|
|
if (!(hw & reg_tbl[i].hw))
|
|
continue;
|
|
|
|
offset = reg_tbl[i].offset0 + port*reg_tbl[i].offset1;
|
|
mask = reg_tbl[i].mask;
|
|
|
|
save_val = REG_RD(bp, offset);
|
|
|
|
REG_WR(bp, offset, wr_val & mask);
|
|
|
|
val = REG_RD(bp, offset);
|
|
|
|
/* Restore the original register's value */
|
|
REG_WR(bp, offset, save_val);
|
|
|
|
/* verify value is as expected */
|
|
if ((val & mask) != (wr_val & mask)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"offset 0x%x: val 0x%x != 0x%x mask 0x%x\n",
|
|
offset, val, wr_val, mask);
|
|
goto test_reg_exit;
|
|
}
|
|
}
|
|
}
|
|
|
|
rc = 0;
|
|
|
|
test_reg_exit:
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_test_memory(struct bnx2x *bp)
|
|
{
|
|
int i, j, rc = -ENODEV;
|
|
u32 val, index;
|
|
static const struct {
|
|
u32 offset;
|
|
int size;
|
|
} mem_tbl[] = {
|
|
{ CCM_REG_XX_DESCR_TABLE, CCM_REG_XX_DESCR_TABLE_SIZE },
|
|
{ CFC_REG_ACTIVITY_COUNTER, CFC_REG_ACTIVITY_COUNTER_SIZE },
|
|
{ CFC_REG_LINK_LIST, CFC_REG_LINK_LIST_SIZE },
|
|
{ DMAE_REG_CMD_MEM, DMAE_REG_CMD_MEM_SIZE },
|
|
{ TCM_REG_XX_DESCR_TABLE, TCM_REG_XX_DESCR_TABLE_SIZE },
|
|
{ UCM_REG_XX_DESCR_TABLE, UCM_REG_XX_DESCR_TABLE_SIZE },
|
|
{ XCM_REG_XX_DESCR_TABLE, XCM_REG_XX_DESCR_TABLE_SIZE },
|
|
|
|
{ 0xffffffff, 0 }
|
|
};
|
|
|
|
static const struct {
|
|
char *name;
|
|
u32 offset;
|
|
u32 hw_mask[BNX2X_CHIP_MAX_OFST];
|
|
} prty_tbl[] = {
|
|
{ "CCM_PRTY_STS", CCM_REG_CCM_PRTY_STS,
|
|
{0x3ffc0, 0, 0, 0} },
|
|
{ "CFC_PRTY_STS", CFC_REG_CFC_PRTY_STS,
|
|
{0x2, 0x2, 0, 0} },
|
|
{ "DMAE_PRTY_STS", DMAE_REG_DMAE_PRTY_STS,
|
|
{0, 0, 0, 0} },
|
|
{ "TCM_PRTY_STS", TCM_REG_TCM_PRTY_STS,
|
|
{0x3ffc0, 0, 0, 0} },
|
|
{ "UCM_PRTY_STS", UCM_REG_UCM_PRTY_STS,
|
|
{0x3ffc0, 0, 0, 0} },
|
|
{ "XCM_PRTY_STS", XCM_REG_XCM_PRTY_STS,
|
|
{0x3ffc1, 0, 0, 0} },
|
|
|
|
{ NULL, 0xffffffff, {0, 0, 0, 0} }
|
|
};
|
|
|
|
if (!bnx2x_is_nvm_accessible(bp)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"cannot access eeprom when the interface is down\n");
|
|
return rc;
|
|
}
|
|
|
|
if (CHIP_IS_E1(bp))
|
|
index = BNX2X_CHIP_E1_OFST;
|
|
else if (CHIP_IS_E1H(bp))
|
|
index = BNX2X_CHIP_E1H_OFST;
|
|
else if (CHIP_IS_E2(bp))
|
|
index = BNX2X_CHIP_E2_OFST;
|
|
else /* e3 */
|
|
index = BNX2X_CHIP_E3_OFST;
|
|
|
|
/* pre-Check the parity status */
|
|
for (i = 0; prty_tbl[i].offset != 0xffffffff; i++) {
|
|
val = REG_RD(bp, prty_tbl[i].offset);
|
|
if (val & ~(prty_tbl[i].hw_mask[index])) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"%s is 0x%x\n", prty_tbl[i].name, val);
|
|
goto test_mem_exit;
|
|
}
|
|
}
|
|
|
|
/* Go through all the memories */
|
|
for (i = 0; mem_tbl[i].offset != 0xffffffff; i++)
|
|
for (j = 0; j < mem_tbl[i].size; j++)
|
|
REG_RD(bp, mem_tbl[i].offset + j*4);
|
|
|
|
/* Check the parity status */
|
|
for (i = 0; prty_tbl[i].offset != 0xffffffff; i++) {
|
|
val = REG_RD(bp, prty_tbl[i].offset);
|
|
if (val & ~(prty_tbl[i].hw_mask[index])) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"%s is 0x%x\n", prty_tbl[i].name, val);
|
|
goto test_mem_exit;
|
|
}
|
|
}
|
|
|
|
rc = 0;
|
|
|
|
test_mem_exit:
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_wait_for_link(struct bnx2x *bp, u8 link_up, u8 is_serdes)
|
|
{
|
|
int cnt = 1400;
|
|
|
|
if (link_up) {
|
|
while (bnx2x_link_test(bp, is_serdes) && cnt--)
|
|
msleep(20);
|
|
|
|
if (cnt <= 0 && bnx2x_link_test(bp, is_serdes))
|
|
DP(BNX2X_MSG_ETHTOOL, "Timeout waiting for link up\n");
|
|
|
|
cnt = 1400;
|
|
while (!bp->link_vars.link_up && cnt--)
|
|
msleep(20);
|
|
|
|
if (cnt <= 0 && !bp->link_vars.link_up)
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Timeout waiting for link init\n");
|
|
}
|
|
}
|
|
|
|
static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode)
|
|
{
|
|
unsigned int pkt_size, num_pkts, i;
|
|
struct sk_buff *skb;
|
|
unsigned char *packet;
|
|
struct bnx2x_fastpath *fp_rx = &bp->fp[0];
|
|
struct bnx2x_fastpath *fp_tx = &bp->fp[0];
|
|
struct bnx2x_fp_txdata *txdata = fp_tx->txdata_ptr[0];
|
|
u16 tx_start_idx, tx_idx;
|
|
u16 rx_start_idx, rx_idx;
|
|
u16 pkt_prod, bd_prod;
|
|
struct sw_tx_bd *tx_buf;
|
|
struct eth_tx_start_bd *tx_start_bd;
|
|
dma_addr_t mapping;
|
|
union eth_rx_cqe *cqe;
|
|
u8 cqe_fp_flags, cqe_fp_type;
|
|
struct sw_rx_bd *rx_buf;
|
|
u16 len;
|
|
int rc = -ENODEV;
|
|
u8 *data;
|
|
struct netdev_queue *txq = netdev_get_tx_queue(bp->dev,
|
|
txdata->txq_index);
|
|
|
|
/* check the loopback mode */
|
|
switch (loopback_mode) {
|
|
case BNX2X_PHY_LOOPBACK:
|
|
if (bp->link_params.loopback_mode != LOOPBACK_XGXS) {
|
|
DP(BNX2X_MSG_ETHTOOL, "PHY loopback not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case BNX2X_MAC_LOOPBACK:
|
|
if (CHIP_IS_E3(bp)) {
|
|
int cfg_idx = bnx2x_get_link_cfg_idx(bp);
|
|
if (bp->port.supported[cfg_idx] &
|
|
(SUPPORTED_10000baseT_Full |
|
|
SUPPORTED_20000baseMLD2_Full |
|
|
SUPPORTED_20000baseKR2_Full))
|
|
bp->link_params.loopback_mode = LOOPBACK_XMAC;
|
|
else
|
|
bp->link_params.loopback_mode = LOOPBACK_UMAC;
|
|
} else
|
|
bp->link_params.loopback_mode = LOOPBACK_BMAC;
|
|
|
|
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
|
|
break;
|
|
case BNX2X_EXT_LOOPBACK:
|
|
if (bp->link_params.loopback_mode != LOOPBACK_EXT) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Can't configure external loopback\n");
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* prepare the loopback packet */
|
|
pkt_size = (((bp->dev->mtu < ETH_MAX_PACKET_SIZE) ?
|
|
bp->dev->mtu : ETH_MAX_PACKET_SIZE) + ETH_HLEN);
|
|
skb = netdev_alloc_skb(bp->dev, fp_rx->rx_buf_size);
|
|
if (!skb) {
|
|
DP(BNX2X_MSG_ETHTOOL, "Can't allocate skb\n");
|
|
rc = -ENOMEM;
|
|
goto test_loopback_exit;
|
|
}
|
|
packet = skb_put(skb, pkt_size);
|
|
memcpy(packet, bp->dev->dev_addr, ETH_ALEN);
|
|
memset(packet + ETH_ALEN, 0, ETH_ALEN);
|
|
memset(packet + 2*ETH_ALEN, 0x77, (ETH_HLEN - 2*ETH_ALEN));
|
|
for (i = ETH_HLEN; i < pkt_size; i++)
|
|
packet[i] = (unsigned char) (i & 0xff);
|
|
mapping = dma_map_single(&bp->pdev->dev, skb->data,
|
|
skb_headlen(skb), DMA_TO_DEVICE);
|
|
if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
|
|
rc = -ENOMEM;
|
|
dev_kfree_skb(skb);
|
|
DP(BNX2X_MSG_ETHTOOL, "Unable to map SKB\n");
|
|
goto test_loopback_exit;
|
|
}
|
|
|
|
/* send the loopback packet */
|
|
num_pkts = 0;
|
|
tx_start_idx = le16_to_cpu(*txdata->tx_cons_sb);
|
|
rx_start_idx = le16_to_cpu(*fp_rx->rx_cons_sb);
|
|
|
|
netdev_tx_sent_queue(txq, skb->len);
|
|
|
|
pkt_prod = txdata->tx_pkt_prod++;
|
|
tx_buf = &txdata->tx_buf_ring[TX_BD(pkt_prod)];
|
|
tx_buf->first_bd = txdata->tx_bd_prod;
|
|
tx_buf->skb = skb;
|
|
tx_buf->flags = 0;
|
|
|
|
bd_prod = TX_BD(txdata->tx_bd_prod);
|
|
tx_start_bd = &txdata->tx_desc_ring[bd_prod].start_bd;
|
|
tx_start_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
|
|
tx_start_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
|
|
tx_start_bd->nbd = cpu_to_le16(2); /* start + pbd */
|
|
tx_start_bd->nbytes = cpu_to_le16(skb_headlen(skb));
|
|
tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
|
|
tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
|
|
SET_FLAG(tx_start_bd->general_data,
|
|
ETH_TX_START_BD_HDR_NBDS,
|
|
1);
|
|
SET_FLAG(tx_start_bd->general_data,
|
|
ETH_TX_START_BD_PARSE_NBDS,
|
|
0);
|
|
|
|
/* turn on parsing and get a BD */
|
|
bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
|
|
|
|
if (CHIP_IS_E1x(bp)) {
|
|
u16 global_data = 0;
|
|
struct eth_tx_parse_bd_e1x *pbd_e1x =
|
|
&txdata->tx_desc_ring[bd_prod].parse_bd_e1x;
|
|
memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
|
|
SET_FLAG(global_data,
|
|
ETH_TX_PARSE_BD_E1X_ETH_ADDR_TYPE, UNICAST_ADDRESS);
|
|
pbd_e1x->global_data = cpu_to_le16(global_data);
|
|
} else {
|
|
u32 parsing_data = 0;
|
|
struct eth_tx_parse_bd_e2 *pbd_e2 =
|
|
&txdata->tx_desc_ring[bd_prod].parse_bd_e2;
|
|
memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
|
|
SET_FLAG(parsing_data,
|
|
ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE, UNICAST_ADDRESS);
|
|
pbd_e2->parsing_data = cpu_to_le32(parsing_data);
|
|
}
|
|
wmb();
|
|
|
|
txdata->tx_db.data.prod += 2;
|
|
barrier();
|
|
DOORBELL(bp, txdata->cid, txdata->tx_db.raw);
|
|
|
|
mmiowb();
|
|
barrier();
|
|
|
|
num_pkts++;
|
|
txdata->tx_bd_prod += 2; /* start + pbd */
|
|
|
|
udelay(100);
|
|
|
|
tx_idx = le16_to_cpu(*txdata->tx_cons_sb);
|
|
if (tx_idx != tx_start_idx + num_pkts)
|
|
goto test_loopback_exit;
|
|
|
|
/* Unlike HC IGU won't generate an interrupt for status block
|
|
* updates that have been performed while interrupts were
|
|
* disabled.
|
|
*/
|
|
if (bp->common.int_block == INT_BLOCK_IGU) {
|
|
/* Disable local BHes to prevent a dead-lock situation between
|
|
* sch_direct_xmit() and bnx2x_run_loopback() (calling
|
|
* bnx2x_tx_int()), as both are taking netif_tx_lock().
|
|
*/
|
|
local_bh_disable();
|
|
bnx2x_tx_int(bp, txdata);
|
|
local_bh_enable();
|
|
}
|
|
|
|
rx_idx = le16_to_cpu(*fp_rx->rx_cons_sb);
|
|
if (rx_idx != rx_start_idx + num_pkts)
|
|
goto test_loopback_exit;
|
|
|
|
cqe = &fp_rx->rx_comp_ring[RCQ_BD(fp_rx->rx_comp_cons)];
|
|
cqe_fp_flags = cqe->fast_path_cqe.type_error_flags;
|
|
cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
|
|
if (!CQE_TYPE_FAST(cqe_fp_type) || (cqe_fp_flags & ETH_RX_ERROR_FALGS))
|
|
goto test_loopback_rx_exit;
|
|
|
|
len = le16_to_cpu(cqe->fast_path_cqe.pkt_len_or_gro_seg_len);
|
|
if (len != pkt_size)
|
|
goto test_loopback_rx_exit;
|
|
|
|
rx_buf = &fp_rx->rx_buf_ring[RX_BD(fp_rx->rx_bd_cons)];
|
|
dma_sync_single_for_cpu(&bp->pdev->dev,
|
|
dma_unmap_addr(rx_buf, mapping),
|
|
fp_rx->rx_buf_size, DMA_FROM_DEVICE);
|
|
data = rx_buf->data + NET_SKB_PAD + cqe->fast_path_cqe.placement_offset;
|
|
for (i = ETH_HLEN; i < pkt_size; i++)
|
|
if (*(data + i) != (unsigned char) (i & 0xff))
|
|
goto test_loopback_rx_exit;
|
|
|
|
rc = 0;
|
|
|
|
test_loopback_rx_exit:
|
|
|
|
fp_rx->rx_bd_cons = NEXT_RX_IDX(fp_rx->rx_bd_cons);
|
|
fp_rx->rx_bd_prod = NEXT_RX_IDX(fp_rx->rx_bd_prod);
|
|
fp_rx->rx_comp_cons = NEXT_RCQ_IDX(fp_rx->rx_comp_cons);
|
|
fp_rx->rx_comp_prod = NEXT_RCQ_IDX(fp_rx->rx_comp_prod);
|
|
|
|
/* Update producers */
|
|
bnx2x_update_rx_prod(bp, fp_rx, fp_rx->rx_bd_prod, fp_rx->rx_comp_prod,
|
|
fp_rx->rx_sge_prod);
|
|
|
|
test_loopback_exit:
|
|
bp->link_params.loopback_mode = LOOPBACK_NONE;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_test_loopback(struct bnx2x *bp)
|
|
{
|
|
int rc = 0, res;
|
|
|
|
if (BP_NOMCP(bp))
|
|
return rc;
|
|
|
|
if (!netif_running(bp->dev))
|
|
return BNX2X_LOOPBACK_FAILED;
|
|
|
|
bnx2x_netif_stop(bp, 1);
|
|
bnx2x_acquire_phy_lock(bp);
|
|
|
|
res = bnx2x_run_loopback(bp, BNX2X_PHY_LOOPBACK);
|
|
if (res) {
|
|
DP(BNX2X_MSG_ETHTOOL, " PHY loopback failed (res %d)\n", res);
|
|
rc |= BNX2X_PHY_LOOPBACK_FAILED;
|
|
}
|
|
|
|
res = bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK);
|
|
if (res) {
|
|
DP(BNX2X_MSG_ETHTOOL, " MAC loopback failed (res %d)\n", res);
|
|
rc |= BNX2X_MAC_LOOPBACK_FAILED;
|
|
}
|
|
|
|
bnx2x_release_phy_lock(bp);
|
|
bnx2x_netif_start(bp);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_test_ext_loopback(struct bnx2x *bp)
|
|
{
|
|
int rc;
|
|
u8 is_serdes =
|
|
(bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) > 0;
|
|
|
|
if (BP_NOMCP(bp))
|
|
return -ENODEV;
|
|
|
|
if (!netif_running(bp->dev))
|
|
return BNX2X_EXT_LOOPBACK_FAILED;
|
|
|
|
bnx2x_nic_unload(bp, UNLOAD_NORMAL, false);
|
|
rc = bnx2x_nic_load(bp, LOAD_LOOPBACK_EXT);
|
|
if (rc) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Can't perform self-test, nic_load (for external lb) failed\n");
|
|
return -ENODEV;
|
|
}
|
|
bnx2x_wait_for_link(bp, 1, is_serdes);
|
|
|
|
bnx2x_netif_stop(bp, 1);
|
|
|
|
rc = bnx2x_run_loopback(bp, BNX2X_EXT_LOOPBACK);
|
|
if (rc)
|
|
DP(BNX2X_MSG_ETHTOOL, "EXT loopback failed (res %d)\n", rc);
|
|
|
|
bnx2x_netif_start(bp);
|
|
|
|
return rc;
|
|
}
|
|
|
|
struct code_entry {
|
|
u32 sram_start_addr;
|
|
u32 code_attribute;
|
|
#define CODE_IMAGE_TYPE_MASK 0xf0800003
|
|
#define CODE_IMAGE_VNTAG_PROFILES_DATA 0xd0000003
|
|
#define CODE_IMAGE_LENGTH_MASK 0x007ffffc
|
|
#define CODE_IMAGE_TYPE_EXTENDED_DIR 0xe0000000
|
|
u32 nvm_start_addr;
|
|
};
|
|
|
|
#define CODE_ENTRY_MAX 16
|
|
#define CODE_ENTRY_EXTENDED_DIR_IDX 15
|
|
#define MAX_IMAGES_IN_EXTENDED_DIR 64
|
|
#define NVRAM_DIR_OFFSET 0x14
|
|
|
|
#define EXTENDED_DIR_EXISTS(code) \
|
|
((code & CODE_IMAGE_TYPE_MASK) == CODE_IMAGE_TYPE_EXTENDED_DIR && \
|
|
(code & CODE_IMAGE_LENGTH_MASK) != 0)
|
|
|
|
#define CRC32_RESIDUAL 0xdebb20e3
|
|
#define CRC_BUFF_SIZE 256
|
|
|
|
static int bnx2x_nvram_crc(struct bnx2x *bp,
|
|
int offset,
|
|
int size,
|
|
u8 *buff)
|
|
{
|
|
u32 crc = ~0;
|
|
int rc = 0, done = 0;
|
|
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"NVRAM CRC from 0x%08x to 0x%08x\n", offset, offset + size);
|
|
|
|
while (done < size) {
|
|
int count = min_t(int, size - done, CRC_BUFF_SIZE);
|
|
|
|
rc = bnx2x_nvram_read(bp, offset + done, buff, count);
|
|
|
|
if (rc)
|
|
return rc;
|
|
|
|
crc = crc32_le(crc, buff, count);
|
|
done += count;
|
|
}
|
|
|
|
if (crc != CRC32_RESIDUAL)
|
|
rc = -EINVAL;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_test_nvram_dir(struct bnx2x *bp,
|
|
struct code_entry *entry,
|
|
u8 *buff)
|
|
{
|
|
size_t size = entry->code_attribute & CODE_IMAGE_LENGTH_MASK;
|
|
u32 type = entry->code_attribute & CODE_IMAGE_TYPE_MASK;
|
|
int rc;
|
|
|
|
/* Zero-length images and AFEX profiles do not have CRC */
|
|
if (size == 0 || type == CODE_IMAGE_VNTAG_PROFILES_DATA)
|
|
return 0;
|
|
|
|
rc = bnx2x_nvram_crc(bp, entry->nvm_start_addr, size, buff);
|
|
if (rc)
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"image %x has failed crc test (rc %d)\n", type, rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_test_dir_entry(struct bnx2x *bp, u32 addr, u8 *buff)
|
|
{
|
|
int rc;
|
|
struct code_entry entry;
|
|
|
|
rc = bnx2x_nvram_read32(bp, addr, (u32 *)&entry, sizeof(entry));
|
|
if (rc)
|
|
return rc;
|
|
|
|
return bnx2x_test_nvram_dir(bp, &entry, buff);
|
|
}
|
|
|
|
static int bnx2x_test_nvram_ext_dirs(struct bnx2x *bp, u8 *buff)
|
|
{
|
|
u32 rc, cnt, dir_offset = NVRAM_DIR_OFFSET;
|
|
struct code_entry entry;
|
|
int i;
|
|
|
|
rc = bnx2x_nvram_read32(bp,
|
|
dir_offset +
|
|
sizeof(entry) * CODE_ENTRY_EXTENDED_DIR_IDX,
|
|
(u32 *)&entry, sizeof(entry));
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (!EXTENDED_DIR_EXISTS(entry.code_attribute))
|
|
return 0;
|
|
|
|
rc = bnx2x_nvram_read32(bp, entry.nvm_start_addr,
|
|
&cnt, sizeof(u32));
|
|
if (rc)
|
|
return rc;
|
|
|
|
dir_offset = entry.nvm_start_addr + 8;
|
|
|
|
for (i = 0; i < cnt && i < MAX_IMAGES_IN_EXTENDED_DIR; i++) {
|
|
rc = bnx2x_test_dir_entry(bp, dir_offset +
|
|
sizeof(struct code_entry) * i,
|
|
buff);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_test_nvram_dirs(struct bnx2x *bp, u8 *buff)
|
|
{
|
|
u32 rc, dir_offset = NVRAM_DIR_OFFSET;
|
|
int i;
|
|
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "NVRAM DIRS CRC test-set\n");
|
|
|
|
for (i = 0; i < CODE_ENTRY_EXTENDED_DIR_IDX; i++) {
|
|
rc = bnx2x_test_dir_entry(bp, dir_offset +
|
|
sizeof(struct code_entry) * i,
|
|
buff);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
return bnx2x_test_nvram_ext_dirs(bp, buff);
|
|
}
|
|
|
|
struct crc_pair {
|
|
int offset;
|
|
int size;
|
|
};
|
|
|
|
static int bnx2x_test_nvram_tbl(struct bnx2x *bp,
|
|
const struct crc_pair *nvram_tbl, u8 *buf)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; nvram_tbl[i].size; i++) {
|
|
int rc = bnx2x_nvram_crc(bp, nvram_tbl[i].offset,
|
|
nvram_tbl[i].size, buf);
|
|
if (rc) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"nvram_tbl[%d] has failed crc test (rc %d)\n",
|
|
i, rc);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_test_nvram(struct bnx2x *bp)
|
|
{
|
|
const struct crc_pair nvram_tbl[] = {
|
|
{ 0, 0x14 }, /* bootstrap */
|
|
{ 0x14, 0xec }, /* dir */
|
|
{ 0x100, 0x350 }, /* manuf_info */
|
|
{ 0x450, 0xf0 }, /* feature_info */
|
|
{ 0x640, 0x64 }, /* upgrade_key_info */
|
|
{ 0x708, 0x70 }, /* manuf_key_info */
|
|
{ 0, 0 }
|
|
};
|
|
const struct crc_pair nvram_tbl2[] = {
|
|
{ 0x7e8, 0x350 }, /* manuf_info2 */
|
|
{ 0xb38, 0xf0 }, /* feature_info */
|
|
{ 0, 0 }
|
|
};
|
|
|
|
u8 *buf;
|
|
int rc;
|
|
u32 magic;
|
|
|
|
if (BP_NOMCP(bp))
|
|
return 0;
|
|
|
|
buf = kmalloc(CRC_BUFF_SIZE, GFP_KERNEL);
|
|
if (!buf) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "kmalloc failed\n");
|
|
rc = -ENOMEM;
|
|
goto test_nvram_exit;
|
|
}
|
|
|
|
rc = bnx2x_nvram_read32(bp, 0, &magic, sizeof(magic));
|
|
if (rc) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"magic value read (rc %d)\n", rc);
|
|
goto test_nvram_exit;
|
|
}
|
|
|
|
if (magic != 0x669955aa) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"wrong magic value (0x%08x)\n", magic);
|
|
rc = -ENODEV;
|
|
goto test_nvram_exit;
|
|
}
|
|
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "Port 0 CRC test-set\n");
|
|
rc = bnx2x_test_nvram_tbl(bp, nvram_tbl, buf);
|
|
if (rc)
|
|
goto test_nvram_exit;
|
|
|
|
if (!CHIP_IS_E1x(bp) && !CHIP_IS_57811xx(bp)) {
|
|
u32 hide = SHMEM_RD(bp, dev_info.shared_hw_config.config2) &
|
|
SHARED_HW_CFG_HIDE_PORT1;
|
|
|
|
if (!hide) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"Port 1 CRC test-set\n");
|
|
rc = bnx2x_test_nvram_tbl(bp, nvram_tbl2, buf);
|
|
if (rc)
|
|
goto test_nvram_exit;
|
|
}
|
|
}
|
|
|
|
rc = bnx2x_test_nvram_dirs(bp, buf);
|
|
|
|
test_nvram_exit:
|
|
kfree(buf);
|
|
return rc;
|
|
}
|
|
|
|
/* Send an EMPTY ramrod on the first queue */
|
|
static int bnx2x_test_intr(struct bnx2x *bp)
|
|
{
|
|
struct bnx2x_queue_state_params params = {NULL};
|
|
|
|
if (!netif_running(bp->dev)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"cannot access eeprom when the interface is down\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
params.q_obj = &bp->sp_objs->q_obj;
|
|
params.cmd = BNX2X_Q_CMD_EMPTY;
|
|
|
|
__set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags);
|
|
|
|
return bnx2x_queue_state_change(bp, ¶ms);
|
|
}
|
|
|
|
static void bnx2x_self_test(struct net_device *dev,
|
|
struct ethtool_test *etest, u64 *buf)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
u8 is_serdes, link_up;
|
|
int rc, cnt = 0;
|
|
|
|
if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
|
|
netdev_err(bp->dev,
|
|
"Handling parity error recovery. Try again later\n");
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
return;
|
|
}
|
|
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Self-test command parameters: offline = %d, external_lb = %d\n",
|
|
(etest->flags & ETH_TEST_FL_OFFLINE),
|
|
(etest->flags & ETH_TEST_FL_EXTERNAL_LB)>>2);
|
|
|
|
memset(buf, 0, sizeof(u64) * BNX2X_NUM_TESTS(bp));
|
|
|
|
if (bnx2x_test_nvram(bp) != 0) {
|
|
if (!IS_MF(bp))
|
|
buf[4] = 1;
|
|
else
|
|
buf[0] = 1;
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
}
|
|
|
|
if (!netif_running(dev)) {
|
|
DP(BNX2X_MSG_ETHTOOL, "Interface is down\n");
|
|
return;
|
|
}
|
|
|
|
is_serdes = (bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) > 0;
|
|
link_up = bp->link_vars.link_up;
|
|
/* offline tests are not supported in MF mode */
|
|
if ((etest->flags & ETH_TEST_FL_OFFLINE) && !IS_MF(bp)) {
|
|
int port = BP_PORT(bp);
|
|
u32 val;
|
|
|
|
/* save current value of input enable for TX port IF */
|
|
val = REG_RD(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4);
|
|
/* disable input for TX port IF */
|
|
REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, 0);
|
|
|
|
bnx2x_nic_unload(bp, UNLOAD_NORMAL, false);
|
|
rc = bnx2x_nic_load(bp, LOAD_DIAG);
|
|
if (rc) {
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Can't perform self-test, nic_load (for offline) failed\n");
|
|
return;
|
|
}
|
|
|
|
/* wait until link state is restored */
|
|
bnx2x_wait_for_link(bp, 1, is_serdes);
|
|
|
|
if (bnx2x_test_registers(bp) != 0) {
|
|
buf[0] = 1;
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
}
|
|
if (bnx2x_test_memory(bp) != 0) {
|
|
buf[1] = 1;
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
}
|
|
|
|
buf[2] = bnx2x_test_loopback(bp); /* internal LB */
|
|
if (buf[2] != 0)
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
if (etest->flags & ETH_TEST_FL_EXTERNAL_LB) {
|
|
buf[3] = bnx2x_test_ext_loopback(bp); /* external LB */
|
|
if (buf[3] != 0)
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
etest->flags |= ETH_TEST_FL_EXTERNAL_LB_DONE;
|
|
}
|
|
|
|
bnx2x_nic_unload(bp, UNLOAD_NORMAL, false);
|
|
|
|
/* restore input for TX port IF */
|
|
REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, val);
|
|
rc = bnx2x_nic_load(bp, LOAD_NORMAL);
|
|
if (rc) {
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Can't perform self-test, nic_load (for online) failed\n");
|
|
return;
|
|
}
|
|
/* wait until link state is restored */
|
|
bnx2x_wait_for_link(bp, link_up, is_serdes);
|
|
}
|
|
|
|
if (bnx2x_test_intr(bp) != 0) {
|
|
if (!IS_MF(bp))
|
|
buf[5] = 1;
|
|
else
|
|
buf[1] = 1;
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
}
|
|
|
|
if (link_up) {
|
|
cnt = 100;
|
|
while (bnx2x_link_test(bp, is_serdes) && --cnt)
|
|
msleep(20);
|
|
}
|
|
|
|
if (!cnt) {
|
|
if (!IS_MF(bp))
|
|
buf[6] = 1;
|
|
else
|
|
buf[2] = 1;
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
}
|
|
}
|
|
|
|
#define IS_PORT_STAT(i) \
|
|
((bnx2x_stats_arr[i].flags & STATS_FLAGS_BOTH) == STATS_FLAGS_PORT)
|
|
#define IS_FUNC_STAT(i) (bnx2x_stats_arr[i].flags & STATS_FLAGS_FUNC)
|
|
#define IS_MF_MODE_STAT(bp) \
|
|
(IS_MF(bp) && !(bp->msg_enable & BNX2X_MSG_STATS))
|
|
|
|
/* ethtool statistics are displayed for all regular ethernet queues and the
|
|
* fcoe L2 queue if not disabled
|
|
*/
|
|
static int bnx2x_num_stat_queues(struct bnx2x *bp)
|
|
{
|
|
return BNX2X_NUM_ETH_QUEUES(bp);
|
|
}
|
|
|
|
static int bnx2x_get_sset_count(struct net_device *dev, int stringset)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int i, num_strings = 0;
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_STATS:
|
|
if (is_multi(bp)) {
|
|
num_strings = bnx2x_num_stat_queues(bp) *
|
|
BNX2X_NUM_Q_STATS;
|
|
} else
|
|
num_strings = 0;
|
|
if (IS_MF_MODE_STAT(bp)) {
|
|
for (i = 0; i < BNX2X_NUM_STATS; i++)
|
|
if (IS_FUNC_STAT(i))
|
|
num_strings++;
|
|
} else
|
|
num_strings += BNX2X_NUM_STATS;
|
|
|
|
return num_strings;
|
|
|
|
case ETH_SS_TEST:
|
|
return BNX2X_NUM_TESTS(bp);
|
|
|
|
case ETH_SS_PRIV_FLAGS:
|
|
return BNX2X_PRI_FLAG_LEN;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static u32 bnx2x_get_private_flags(struct net_device *dev)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
u32 flags = 0;
|
|
|
|
flags |= (!(bp->flags & NO_ISCSI_FLAG) ? 1 : 0) << BNX2X_PRI_FLAG_ISCSI;
|
|
flags |= (!(bp->flags & NO_FCOE_FLAG) ? 1 : 0) << BNX2X_PRI_FLAG_FCOE;
|
|
flags |= (!!IS_MF_STORAGE_ONLY(bp)) << BNX2X_PRI_FLAG_STORAGE;
|
|
|
|
return flags;
|
|
}
|
|
|
|
static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
int i, j, k, start;
|
|
char queue_name[MAX_QUEUE_NAME_LEN+1];
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_STATS:
|
|
k = 0;
|
|
if (is_multi(bp)) {
|
|
for_each_eth_queue(bp, i) {
|
|
memset(queue_name, 0, sizeof(queue_name));
|
|
sprintf(queue_name, "%d", i);
|
|
for (j = 0; j < BNX2X_NUM_Q_STATS; j++)
|
|
snprintf(buf + (k + j)*ETH_GSTRING_LEN,
|
|
ETH_GSTRING_LEN,
|
|
bnx2x_q_stats_arr[j].string,
|
|
queue_name);
|
|
k += BNX2X_NUM_Q_STATS;
|
|
}
|
|
}
|
|
|
|
for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
|
|
if (IS_MF_MODE_STAT(bp) && IS_PORT_STAT(i))
|
|
continue;
|
|
strcpy(buf + (k + j)*ETH_GSTRING_LEN,
|
|
bnx2x_stats_arr[i].string);
|
|
j++;
|
|
}
|
|
|
|
break;
|
|
|
|
case ETH_SS_TEST:
|
|
/* First 4 tests cannot be done in MF mode */
|
|
if (!IS_MF(bp))
|
|
start = 0;
|
|
else
|
|
start = 4;
|
|
memcpy(buf, bnx2x_tests_str_arr + start,
|
|
ETH_GSTRING_LEN * BNX2X_NUM_TESTS(bp));
|
|
break;
|
|
|
|
case ETH_SS_PRIV_FLAGS:
|
|
memcpy(buf, bnx2x_private_arr,
|
|
ETH_GSTRING_LEN * BNX2X_PRI_FLAG_LEN);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void bnx2x_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats, u64 *buf)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
u32 *hw_stats, *offset;
|
|
int i, j, k = 0;
|
|
|
|
if (is_multi(bp)) {
|
|
for_each_eth_queue(bp, i) {
|
|
hw_stats = (u32 *)&bp->fp_stats[i].eth_q_stats;
|
|
for (j = 0; j < BNX2X_NUM_Q_STATS; j++) {
|
|
if (bnx2x_q_stats_arr[j].size == 0) {
|
|
/* skip this counter */
|
|
buf[k + j] = 0;
|
|
continue;
|
|
}
|
|
offset = (hw_stats +
|
|
bnx2x_q_stats_arr[j].offset);
|
|
if (bnx2x_q_stats_arr[j].size == 4) {
|
|
/* 4-byte counter */
|
|
buf[k + j] = (u64) *offset;
|
|
continue;
|
|
}
|
|
/* 8-byte counter */
|
|
buf[k + j] = HILO_U64(*offset, *(offset + 1));
|
|
}
|
|
k += BNX2X_NUM_Q_STATS;
|
|
}
|
|
}
|
|
|
|
hw_stats = (u32 *)&bp->eth_stats;
|
|
for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
|
|
if (IS_MF_MODE_STAT(bp) && IS_PORT_STAT(i))
|
|
continue;
|
|
if (bnx2x_stats_arr[i].size == 0) {
|
|
/* skip this counter */
|
|
buf[k + j] = 0;
|
|
j++;
|
|
continue;
|
|
}
|
|
offset = (hw_stats + bnx2x_stats_arr[i].offset);
|
|
if (bnx2x_stats_arr[i].size == 4) {
|
|
/* 4-byte counter */
|
|
buf[k + j] = (u64) *offset;
|
|
j++;
|
|
continue;
|
|
}
|
|
/* 8-byte counter */
|
|
buf[k + j] = HILO_U64(*offset, *(offset + 1));
|
|
j++;
|
|
}
|
|
}
|
|
|
|
static int bnx2x_set_phys_id(struct net_device *dev,
|
|
enum ethtool_phys_id_state state)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
if (!bnx2x_is_nvm_accessible(bp)) {
|
|
DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM,
|
|
"cannot access eeprom when the interface is down\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
switch (state) {
|
|
case ETHTOOL_ID_ACTIVE:
|
|
return 1; /* cycle on/off once per second */
|
|
|
|
case ETHTOOL_ID_ON:
|
|
bnx2x_acquire_phy_lock(bp);
|
|
bnx2x_set_led(&bp->link_params, &bp->link_vars,
|
|
LED_MODE_ON, SPEED_1000);
|
|
bnx2x_release_phy_lock(bp);
|
|
break;
|
|
|
|
case ETHTOOL_ID_OFF:
|
|
bnx2x_acquire_phy_lock(bp);
|
|
bnx2x_set_led(&bp->link_params, &bp->link_vars,
|
|
LED_MODE_FRONT_PANEL_OFF, 0);
|
|
bnx2x_release_phy_lock(bp);
|
|
break;
|
|
|
|
case ETHTOOL_ID_INACTIVE:
|
|
bnx2x_acquire_phy_lock(bp);
|
|
bnx2x_set_led(&bp->link_params, &bp->link_vars,
|
|
LED_MODE_OPER,
|
|
bp->link_vars.line_speed);
|
|
bnx2x_release_phy_lock(bp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_get_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info)
|
|
{
|
|
switch (info->flow_type) {
|
|
case TCP_V4_FLOW:
|
|
case TCP_V6_FLOW:
|
|
info->data = RXH_IP_SRC | RXH_IP_DST |
|
|
RXH_L4_B_0_1 | RXH_L4_B_2_3;
|
|
break;
|
|
case UDP_V4_FLOW:
|
|
if (bp->rss_conf_obj.udp_rss_v4)
|
|
info->data = RXH_IP_SRC | RXH_IP_DST |
|
|
RXH_L4_B_0_1 | RXH_L4_B_2_3;
|
|
else
|
|
info->data = RXH_IP_SRC | RXH_IP_DST;
|
|
break;
|
|
case UDP_V6_FLOW:
|
|
if (bp->rss_conf_obj.udp_rss_v6)
|
|
info->data = RXH_IP_SRC | RXH_IP_DST |
|
|
RXH_L4_B_0_1 | RXH_L4_B_2_3;
|
|
else
|
|
info->data = RXH_IP_SRC | RXH_IP_DST;
|
|
break;
|
|
case IPV4_FLOW:
|
|
case IPV6_FLOW:
|
|
info->data = RXH_IP_SRC | RXH_IP_DST;
|
|
break;
|
|
default:
|
|
info->data = 0;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info,
|
|
u32 *rules __always_unused)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
switch (info->cmd) {
|
|
case ETHTOOL_GRXRINGS:
|
|
info->data = BNX2X_NUM_ETH_QUEUES(bp);
|
|
return 0;
|
|
case ETHTOOL_GRXFH:
|
|
return bnx2x_get_rss_flags(bp, info);
|
|
default:
|
|
DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int bnx2x_set_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info)
|
|
{
|
|
int udp_rss_requested;
|
|
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Set rss flags command parameters: flow type = %d, data = %llu\n",
|
|
info->flow_type, info->data);
|
|
|
|
switch (info->flow_type) {
|
|
case TCP_V4_FLOW:
|
|
case TCP_V6_FLOW:
|
|
/* For TCP only 4-tupple hash is supported */
|
|
if (info->data ^ (RXH_IP_SRC | RXH_IP_DST |
|
|
RXH_L4_B_0_1 | RXH_L4_B_2_3)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Command parameters not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
|
|
case UDP_V4_FLOW:
|
|
case UDP_V6_FLOW:
|
|
/* For UDP either 2-tupple hash or 4-tupple hash is supported */
|
|
if (info->data == (RXH_IP_SRC | RXH_IP_DST |
|
|
RXH_L4_B_0_1 | RXH_L4_B_2_3))
|
|
udp_rss_requested = 1;
|
|
else if (info->data == (RXH_IP_SRC | RXH_IP_DST))
|
|
udp_rss_requested = 0;
|
|
else
|
|
return -EINVAL;
|
|
if ((info->flow_type == UDP_V4_FLOW) &&
|
|
(bp->rss_conf_obj.udp_rss_v4 != udp_rss_requested)) {
|
|
bp->rss_conf_obj.udp_rss_v4 = udp_rss_requested;
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"rss re-configured, UDP 4-tupple %s\n",
|
|
udp_rss_requested ? "enabled" : "disabled");
|
|
return bnx2x_rss(bp, &bp->rss_conf_obj, false, true);
|
|
} else if ((info->flow_type == UDP_V6_FLOW) &&
|
|
(bp->rss_conf_obj.udp_rss_v6 != udp_rss_requested)) {
|
|
bp->rss_conf_obj.udp_rss_v6 = udp_rss_requested;
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"rss re-configured, UDP 4-tupple %s\n",
|
|
udp_rss_requested ? "enabled" : "disabled");
|
|
return bnx2x_rss(bp, &bp->rss_conf_obj, false, true);
|
|
}
|
|
return 0;
|
|
|
|
case IPV4_FLOW:
|
|
case IPV6_FLOW:
|
|
/* For IP only 2-tupple hash is supported */
|
|
if (info->data ^ (RXH_IP_SRC | RXH_IP_DST)) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Command parameters not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
|
|
case SCTP_V4_FLOW:
|
|
case AH_ESP_V4_FLOW:
|
|
case AH_V4_FLOW:
|
|
case ESP_V4_FLOW:
|
|
case SCTP_V6_FLOW:
|
|
case AH_ESP_V6_FLOW:
|
|
case AH_V6_FLOW:
|
|
case ESP_V6_FLOW:
|
|
case IP_USER_FLOW:
|
|
case ETHER_FLOW:
|
|
/* RSS is not supported for these protocols */
|
|
if (info->data) {
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"Command parameters not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int bnx2x_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
switch (info->cmd) {
|
|
case ETHTOOL_SRXFH:
|
|
return bnx2x_set_rss_flags(bp, info);
|
|
default:
|
|
DP(BNX2X_MSG_ETHTOOL, "Command parameters not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static u32 bnx2x_get_rxfh_indir_size(struct net_device *dev)
|
|
{
|
|
return T_ETH_INDIRECTION_TABLE_SIZE;
|
|
}
|
|
|
|
static int bnx2x_get_rxfh_indir(struct net_device *dev, u32 *indir)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE] = {0};
|
|
size_t i;
|
|
|
|
/* Get the current configuration of the RSS indirection table */
|
|
bnx2x_get_rss_ind_table(&bp->rss_conf_obj, ind_table);
|
|
|
|
/*
|
|
* We can't use a memcpy() as an internal storage of an
|
|
* indirection table is a u8 array while indir->ring_index
|
|
* points to an array of u32.
|
|
*
|
|
* Indirection table contains the FW Client IDs, so we need to
|
|
* align the returned table to the Client ID of the leading RSS
|
|
* queue.
|
|
*/
|
|
for (i = 0; i < T_ETH_INDIRECTION_TABLE_SIZE; i++)
|
|
indir[i] = ind_table[i] - bp->fp->cl_id;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_set_rxfh_indir(struct net_device *dev, const u32 *indir)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
size_t i;
|
|
|
|
for (i = 0; i < T_ETH_INDIRECTION_TABLE_SIZE; i++) {
|
|
/*
|
|
* The same as in bnx2x_get_rxfh_indir: we can't use a memcpy()
|
|
* as an internal storage of an indirection table is a u8 array
|
|
* while indir->ring_index points to an array of u32.
|
|
*
|
|
* Indirection table contains the FW Client IDs, so we need to
|
|
* align the received table to the Client ID of the leading RSS
|
|
* queue
|
|
*/
|
|
bp->rss_conf_obj.ind_table[i] = indir[i] + bp->fp->cl_id;
|
|
}
|
|
|
|
return bnx2x_config_rss_eth(bp, false);
|
|
}
|
|
|
|
/**
|
|
* bnx2x_get_channels - gets the number of RSS queues.
|
|
*
|
|
* @dev: net device
|
|
* @channels: returns the number of max / current queues
|
|
*/
|
|
static void bnx2x_get_channels(struct net_device *dev,
|
|
struct ethtool_channels *channels)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
channels->max_combined = BNX2X_MAX_RSS_COUNT(bp);
|
|
channels->combined_count = BNX2X_NUM_ETH_QUEUES(bp);
|
|
}
|
|
|
|
/**
|
|
* bnx2x_change_num_queues - change the number of RSS queues.
|
|
*
|
|
* @bp: bnx2x private structure
|
|
*
|
|
* Re-configure interrupt mode to get the new number of MSI-X
|
|
* vectors and re-add NAPI objects.
|
|
*/
|
|
static void bnx2x_change_num_queues(struct bnx2x *bp, int num_rss)
|
|
{
|
|
bnx2x_disable_msi(bp);
|
|
bp->num_ethernet_queues = num_rss;
|
|
bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
|
|
BNX2X_DEV_INFO("set number of queues to %d\n", bp->num_queues);
|
|
bnx2x_set_int_mode(bp);
|
|
}
|
|
|
|
/**
|
|
* bnx2x_set_channels - sets the number of RSS queues.
|
|
*
|
|
* @dev: net device
|
|
* @channels: includes the number of queues requested
|
|
*/
|
|
static int bnx2x_set_channels(struct net_device *dev,
|
|
struct ethtool_channels *channels)
|
|
{
|
|
struct bnx2x *bp = netdev_priv(dev);
|
|
|
|
DP(BNX2X_MSG_ETHTOOL,
|
|
"set-channels command parameters: rx = %d, tx = %d, other = %d, combined = %d\n",
|
|
channels->rx_count, channels->tx_count, channels->other_count,
|
|
channels->combined_count);
|
|
|
|
/* We don't support separate rx / tx channels.
|
|
* We don't allow setting 'other' channels.
|
|
*/
|
|
if (channels->rx_count || channels->tx_count || channels->other_count
|
|
|| (channels->combined_count == 0) ||
|
|
(channels->combined_count > BNX2X_MAX_RSS_COUNT(bp))) {
|
|
DP(BNX2X_MSG_ETHTOOL, "command parameters not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check if there was a change in the active parameters */
|
|
if (channels->combined_count == BNX2X_NUM_ETH_QUEUES(bp)) {
|
|
DP(BNX2X_MSG_ETHTOOL, "No change in active parameters\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Set the requested number of queues in bp context.
|
|
* Note that the actual number of queues created during load may be
|
|
* less than requested if memory is low.
|
|
*/
|
|
if (unlikely(!netif_running(dev))) {
|
|
bnx2x_change_num_queues(bp, channels->combined_count);
|
|
return 0;
|
|
}
|
|
bnx2x_nic_unload(bp, UNLOAD_NORMAL, true);
|
|
bnx2x_change_num_queues(bp, channels->combined_count);
|
|
return bnx2x_nic_load(bp, LOAD_NORMAL);
|
|
}
|
|
|
|
static const struct ethtool_ops bnx2x_ethtool_ops = {
|
|
.get_settings = bnx2x_get_settings,
|
|
.set_settings = bnx2x_set_settings,
|
|
.get_drvinfo = bnx2x_get_drvinfo,
|
|
.get_regs_len = bnx2x_get_regs_len,
|
|
.get_regs = bnx2x_get_regs,
|
|
.get_dump_flag = bnx2x_get_dump_flag,
|
|
.get_dump_data = bnx2x_get_dump_data,
|
|
.set_dump = bnx2x_set_dump,
|
|
.get_wol = bnx2x_get_wol,
|
|
.set_wol = bnx2x_set_wol,
|
|
.get_msglevel = bnx2x_get_msglevel,
|
|
.set_msglevel = bnx2x_set_msglevel,
|
|
.nway_reset = bnx2x_nway_reset,
|
|
.get_link = bnx2x_get_link,
|
|
.get_eeprom_len = bnx2x_get_eeprom_len,
|
|
.get_eeprom = bnx2x_get_eeprom,
|
|
.set_eeprom = bnx2x_set_eeprom,
|
|
.get_coalesce = bnx2x_get_coalesce,
|
|
.set_coalesce = bnx2x_set_coalesce,
|
|
.get_ringparam = bnx2x_get_ringparam,
|
|
.set_ringparam = bnx2x_set_ringparam,
|
|
.get_pauseparam = bnx2x_get_pauseparam,
|
|
.set_pauseparam = bnx2x_set_pauseparam,
|
|
.self_test = bnx2x_self_test,
|
|
.get_sset_count = bnx2x_get_sset_count,
|
|
.get_priv_flags = bnx2x_get_private_flags,
|
|
.get_strings = bnx2x_get_strings,
|
|
.set_phys_id = bnx2x_set_phys_id,
|
|
.get_ethtool_stats = bnx2x_get_ethtool_stats,
|
|
.get_rxnfc = bnx2x_get_rxnfc,
|
|
.set_rxnfc = bnx2x_set_rxnfc,
|
|
.get_rxfh_indir_size = bnx2x_get_rxfh_indir_size,
|
|
.get_rxfh_indir = bnx2x_get_rxfh_indir,
|
|
.set_rxfh_indir = bnx2x_set_rxfh_indir,
|
|
.get_channels = bnx2x_get_channels,
|
|
.set_channels = bnx2x_set_channels,
|
|
.get_module_info = bnx2x_get_module_info,
|
|
.get_module_eeprom = bnx2x_get_module_eeprom,
|
|
.get_eee = bnx2x_get_eee,
|
|
.set_eee = bnx2x_set_eee,
|
|
.get_ts_info = ethtool_op_get_ts_info,
|
|
};
|
|
|
|
static const struct ethtool_ops bnx2x_vf_ethtool_ops = {
|
|
.get_settings = bnx2x_get_settings,
|
|
.set_settings = bnx2x_set_settings,
|
|
.get_drvinfo = bnx2x_get_drvinfo,
|
|
.get_msglevel = bnx2x_get_msglevel,
|
|
.set_msglevel = bnx2x_set_msglevel,
|
|
.get_link = bnx2x_get_link,
|
|
.get_coalesce = bnx2x_get_coalesce,
|
|
.get_ringparam = bnx2x_get_ringparam,
|
|
.set_ringparam = bnx2x_set_ringparam,
|
|
.get_sset_count = bnx2x_get_sset_count,
|
|
.get_strings = bnx2x_get_strings,
|
|
.get_ethtool_stats = bnx2x_get_ethtool_stats,
|
|
.get_rxnfc = bnx2x_get_rxnfc,
|
|
.set_rxnfc = bnx2x_set_rxnfc,
|
|
.get_rxfh_indir_size = bnx2x_get_rxfh_indir_size,
|
|
.get_rxfh_indir = bnx2x_get_rxfh_indir,
|
|
.set_rxfh_indir = bnx2x_set_rxfh_indir,
|
|
.get_channels = bnx2x_get_channels,
|
|
.set_channels = bnx2x_set_channels,
|
|
};
|
|
|
|
void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev)
|
|
{
|
|
if (IS_PF(bp))
|
|
SET_ETHTOOL_OPS(netdev, &bnx2x_ethtool_ops);
|
|
else /* vf */
|
|
SET_ETHTOOL_OPS(netdev, &bnx2x_vf_ethtool_ops);
|
|
}
|