mirror of https://gitee.com/openkylin/linux.git
797 lines
23 KiB
C
797 lines
23 KiB
C
/*
|
|
* Copyright (C) 2002 Motorola GSG-China
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Author:
|
|
* Darius Augulis, Teltonika Inc.
|
|
*
|
|
* Desc.:
|
|
* Implementation of I2C Adapter/Algorithm Driver
|
|
* for I2C Bus integrated in Freescale i.MX/MXC processors
|
|
*
|
|
* Derived from Motorola GSG China I2C example driver
|
|
*
|
|
* Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de
|
|
* Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de
|
|
* Copyright (C) 2007 RightHand Technologies, Inc.
|
|
* Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
|
|
*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
*/
|
|
|
|
/** Includes *******************************************************************
|
|
*******************************************************************************/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/io.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_data/i2c-imx.h>
|
|
|
|
/** Defines ********************************************************************
|
|
*******************************************************************************/
|
|
|
|
/* This will be the driver name the kernel reports */
|
|
#define DRIVER_NAME "imx-i2c"
|
|
|
|
/* Default value */
|
|
#define IMX_I2C_BIT_RATE 100000 /* 100kHz */
|
|
|
|
/* IMX I2C registers:
|
|
* the I2C register offset is different between SoCs,
|
|
* to provid support for all these chips, split the
|
|
* register offset into a fixed base address and a
|
|
* variable shift value, then the full register offset
|
|
* will be calculated by
|
|
* reg_off = ( reg_base_addr << reg_shift)
|
|
*/
|
|
#define IMX_I2C_IADR 0x00 /* i2c slave address */
|
|
#define IMX_I2C_IFDR 0x01 /* i2c frequency divider */
|
|
#define IMX_I2C_I2CR 0x02 /* i2c control */
|
|
#define IMX_I2C_I2SR 0x03 /* i2c status */
|
|
#define IMX_I2C_I2DR 0x04 /* i2c transfer data */
|
|
|
|
#define IMX_I2C_REGSHIFT 2
|
|
#define VF610_I2C_REGSHIFT 0
|
|
|
|
/* Bits of IMX I2C registers */
|
|
#define I2SR_RXAK 0x01
|
|
#define I2SR_IIF 0x02
|
|
#define I2SR_SRW 0x04
|
|
#define I2SR_IAL 0x10
|
|
#define I2SR_IBB 0x20
|
|
#define I2SR_IAAS 0x40
|
|
#define I2SR_ICF 0x80
|
|
#define I2CR_RSTA 0x04
|
|
#define I2CR_TXAK 0x08
|
|
#define I2CR_MTX 0x10
|
|
#define I2CR_MSTA 0x20
|
|
#define I2CR_IIEN 0x40
|
|
#define I2CR_IEN 0x80
|
|
|
|
/* register bits different operating codes definition:
|
|
* 1) I2SR: Interrupt flags clear operation differ between SoCs:
|
|
* - write zero to clear(w0c) INT flag on i.MX,
|
|
* - but write one to clear(w1c) INT flag on Vybrid.
|
|
* 2) I2CR: I2C module enable operation also differ between SoCs:
|
|
* - set I2CR_IEN bit enable the module on i.MX,
|
|
* - but clear I2CR_IEN bit enable the module on Vybrid.
|
|
*/
|
|
#define I2SR_CLR_OPCODE_W0C 0x0
|
|
#define I2SR_CLR_OPCODE_W1C (I2SR_IAL | I2SR_IIF)
|
|
#define I2CR_IEN_OPCODE_0 0x0
|
|
#define I2CR_IEN_OPCODE_1 I2CR_IEN
|
|
|
|
/** Variables ******************************************************************
|
|
*******************************************************************************/
|
|
|
|
/*
|
|
* sorted list of clock divider, register value pairs
|
|
* taken from table 26-5, p.26-9, Freescale i.MX
|
|
* Integrated Portable System Processor Reference Manual
|
|
* Document Number: MC9328MXLRM, Rev. 5.1, 06/2007
|
|
*
|
|
* Duplicated divider values removed from list
|
|
*/
|
|
struct imx_i2c_clk_pair {
|
|
u16 div;
|
|
u16 val;
|
|
};
|
|
|
|
static struct imx_i2c_clk_pair imx_i2c_clk_div[] = {
|
|
{ 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
|
|
{ 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
|
|
{ 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
|
|
{ 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B },
|
|
{ 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A },
|
|
{ 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 },
|
|
{ 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 },
|
|
{ 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 },
|
|
{ 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 },
|
|
{ 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B },
|
|
{ 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E },
|
|
{ 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D },
|
|
{ 3072, 0x1E }, { 3840, 0x1F }
|
|
};
|
|
|
|
/* Vybrid VF610 clock divider, register value pairs */
|
|
static struct imx_i2c_clk_pair vf610_i2c_clk_div[] = {
|
|
{ 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 },
|
|
{ 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 },
|
|
{ 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D },
|
|
{ 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 },
|
|
{ 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 },
|
|
{ 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
|
|
{ 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
|
|
{ 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
|
|
{ 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
|
|
{ 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
|
|
{ 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
|
|
{ 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
|
|
{ 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
|
|
{ 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
|
|
{ 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
|
|
};
|
|
|
|
enum imx_i2c_type {
|
|
IMX1_I2C,
|
|
IMX21_I2C,
|
|
VF610_I2C,
|
|
};
|
|
|
|
struct imx_i2c_hwdata {
|
|
enum imx_i2c_type devtype;
|
|
unsigned regshift;
|
|
struct imx_i2c_clk_pair *clk_div;
|
|
unsigned ndivs;
|
|
unsigned i2sr_clr_opcode;
|
|
unsigned i2cr_ien_opcode;
|
|
};
|
|
|
|
struct imx_i2c_struct {
|
|
struct i2c_adapter adapter;
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
wait_queue_head_t queue;
|
|
unsigned long i2csr;
|
|
unsigned int disable_delay;
|
|
int stopped;
|
|
unsigned int ifdr; /* IMX_I2C_IFDR */
|
|
unsigned int cur_clk;
|
|
unsigned int bitrate;
|
|
const struct imx_i2c_hwdata *hwdata;
|
|
};
|
|
|
|
static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
|
|
.devtype = IMX1_I2C,
|
|
.regshift = IMX_I2C_REGSHIFT,
|
|
.clk_div = imx_i2c_clk_div,
|
|
.ndivs = ARRAY_SIZE(imx_i2c_clk_div),
|
|
.i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
|
|
.i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
|
|
|
|
};
|
|
|
|
static const struct imx_i2c_hwdata imx21_i2c_hwdata = {
|
|
.devtype = IMX21_I2C,
|
|
.regshift = IMX_I2C_REGSHIFT,
|
|
.clk_div = imx_i2c_clk_div,
|
|
.ndivs = ARRAY_SIZE(imx_i2c_clk_div),
|
|
.i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C,
|
|
.i2cr_ien_opcode = I2CR_IEN_OPCODE_1,
|
|
|
|
};
|
|
|
|
static struct imx_i2c_hwdata vf610_i2c_hwdata = {
|
|
.devtype = VF610_I2C,
|
|
.regshift = VF610_I2C_REGSHIFT,
|
|
.clk_div = vf610_i2c_clk_div,
|
|
.ndivs = ARRAY_SIZE(vf610_i2c_clk_div),
|
|
.i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C,
|
|
.i2cr_ien_opcode = I2CR_IEN_OPCODE_0,
|
|
|
|
};
|
|
|
|
static struct platform_device_id imx_i2c_devtype[] = {
|
|
{
|
|
.name = "imx1-i2c",
|
|
.driver_data = (kernel_ulong_t)&imx1_i2c_hwdata,
|
|
}, {
|
|
.name = "imx21-i2c",
|
|
.driver_data = (kernel_ulong_t)&imx21_i2c_hwdata,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
|
|
|
|
static const struct of_device_id i2c_imx_dt_ids[] = {
|
|
{ .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, },
|
|
{ .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, },
|
|
{ .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
|
|
|
|
static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
return i2c_imx->hwdata->devtype == IMX1_I2C;
|
|
}
|
|
|
|
static inline void imx_i2c_write_reg(unsigned int val,
|
|
struct imx_i2c_struct *i2c_imx, unsigned int reg)
|
|
{
|
|
writeb(val, i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
|
|
}
|
|
|
|
static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
|
|
unsigned int reg)
|
|
{
|
|
return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
|
|
}
|
|
|
|
/** Functions for IMX I2C adapter driver ***************************************
|
|
*******************************************************************************/
|
|
|
|
static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
|
|
{
|
|
unsigned long orig_jiffies = jiffies;
|
|
unsigned int temp;
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
|
|
|
|
while (1) {
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
|
|
|
|
/* check for arbitration lost */
|
|
if (temp & I2SR_IAL) {
|
|
temp &= ~I2SR_IAL;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (for_busy && (temp & I2SR_IBB))
|
|
break;
|
|
if (!for_busy && !(temp & I2SR_IBB))
|
|
break;
|
|
if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> I2C bus is busy\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
schedule();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10);
|
|
|
|
if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
|
|
i2c_imx->i2csr = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) {
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
|
|
return -EIO; /* No ACK */
|
|
}
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> ACK received\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
|
|
unsigned int i2c_clk_rate;
|
|
unsigned int div;
|
|
int i;
|
|
|
|
/* Divider value calculation */
|
|
i2c_clk_rate = clk_get_rate(i2c_imx->clk);
|
|
if (i2c_imx->cur_clk == i2c_clk_rate)
|
|
return;
|
|
else
|
|
i2c_imx->cur_clk = i2c_clk_rate;
|
|
|
|
div = (i2c_clk_rate + i2c_imx->bitrate - 1) / i2c_imx->bitrate;
|
|
if (div < i2c_clk_div[0].div)
|
|
i = 0;
|
|
else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div)
|
|
i = i2c_imx->hwdata->ndivs - 1;
|
|
else
|
|
for (i = 0; i2c_clk_div[i].div < div; i++);
|
|
|
|
/* Store divider value */
|
|
i2c_imx->ifdr = i2c_clk_div[i].val;
|
|
|
|
/*
|
|
* There dummy delay is calculated.
|
|
* It should be about one I2C clock period long.
|
|
* This delay is used in I2C bus disable function
|
|
* to fix chip hardware bug.
|
|
*/
|
|
i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div
|
|
+ (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
|
|
|
|
#ifdef CONFIG_I2C_DEBUG_BUS
|
|
dev_dbg(&i2c_imx->adapter.dev, "I2C_CLK=%d, REQ DIV=%d\n",
|
|
i2c_clk_rate, div);
|
|
dev_dbg(&i2c_imx->adapter.dev, "IFDR[IC]=0x%x, REAL DIV=%d\n",
|
|
i2c_clk_div[i].val, i2c_clk_div[i].div);
|
|
#endif
|
|
}
|
|
|
|
static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
unsigned int temp = 0;
|
|
int result;
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
|
|
|
|
i2c_imx_set_clk(i2c_imx);
|
|
|
|
result = clk_prepare_enable(i2c_imx->clk);
|
|
if (result)
|
|
return result;
|
|
imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR);
|
|
/* Enable I2C controller */
|
|
imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
|
|
imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR);
|
|
|
|
/* Wait controller to be stable */
|
|
udelay(50);
|
|
|
|
/* Start I2C transaction */
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp |= I2CR_MSTA;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
result = i2c_imx_bus_busy(i2c_imx, 1);
|
|
if (result)
|
|
return result;
|
|
i2c_imx->stopped = 0;
|
|
|
|
temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
return result;
|
|
}
|
|
|
|
static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
|
|
{
|
|
unsigned int temp = 0;
|
|
|
|
if (!i2c_imx->stopped) {
|
|
/* Stop I2C transaction */
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp &= ~(I2CR_MSTA | I2CR_MTX);
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
}
|
|
if (is_imx1_i2c(i2c_imx)) {
|
|
/*
|
|
* This delay caused by an i.MXL hardware bug.
|
|
* If no (or too short) delay, no "STOP" bit will be generated.
|
|
*/
|
|
udelay(i2c_imx->disable_delay);
|
|
}
|
|
|
|
if (!i2c_imx->stopped) {
|
|
i2c_imx_bus_busy(i2c_imx, 0);
|
|
i2c_imx->stopped = 1;
|
|
}
|
|
|
|
/* Disable I2C controller */
|
|
temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
clk_disable_unprepare(i2c_imx->clk);
|
|
}
|
|
|
|
static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
|
|
{
|
|
struct imx_i2c_struct *i2c_imx = dev_id;
|
|
unsigned int temp;
|
|
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
|
|
if (temp & I2SR_IIF) {
|
|
/* save status register */
|
|
i2c_imx->i2csr = temp;
|
|
temp &= ~I2SR_IIF;
|
|
temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
|
|
wake_up(&i2c_imx->queue);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
|
|
{
|
|
int i, result;
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n",
|
|
__func__, msgs->addr << 1);
|
|
|
|
/* write slave address */
|
|
imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
|
|
result = i2c_imx_trx_complete(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
result = i2c_imx_acked(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> write data\n", __func__);
|
|
|
|
/* write data */
|
|
for (i = 0; i < msgs->len; i++) {
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> write byte: B%d=0x%X\n",
|
|
__func__, i, msgs->buf[i]);
|
|
imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
|
|
result = i2c_imx_trx_complete(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
result = i2c_imx_acked(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bool is_lastmsg)
|
|
{
|
|
int i, result;
|
|
unsigned int temp;
|
|
int block_data = msgs->flags & I2C_M_RECV_LEN;
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> write slave address: addr=0x%x\n",
|
|
__func__, (msgs->addr << 1) | 0x01);
|
|
|
|
/* write slave address */
|
|
imx_i2c_write_reg((msgs->addr << 1) | 0x01, i2c_imx, IMX_I2C_I2DR);
|
|
result = i2c_imx_trx_complete(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
result = i2c_imx_acked(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
|
|
|
|
/* setup bus to read data */
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp &= ~I2CR_MTX;
|
|
|
|
/*
|
|
* Reset the I2CR_TXAK flag initially for SMBus block read since the
|
|
* length is unknown
|
|
*/
|
|
if ((msgs->len - 1) || block_data)
|
|
temp &= ~I2CR_TXAK;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
|
|
|
|
/* read data */
|
|
for (i = 0; i < msgs->len; i++) {
|
|
u8 len = 0;
|
|
result = i2c_imx_trx_complete(i2c_imx);
|
|
if (result)
|
|
return result;
|
|
/*
|
|
* First byte is the length of remaining packet
|
|
* in the SMBus block data read. Add it to
|
|
* msgs->len.
|
|
*/
|
|
if ((!i) && block_data) {
|
|
len = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
|
|
if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX))
|
|
return -EPROTO;
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> read length: 0x%X\n",
|
|
__func__, len);
|
|
msgs->len += len;
|
|
}
|
|
if (i == (msgs->len - 1)) {
|
|
if (is_lastmsg) {
|
|
/*
|
|
* It must generate STOP before read I2DR to prevent
|
|
* controller from generating another clock cycle
|
|
*/
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> clear MSTA\n", __func__);
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp &= ~(I2CR_MSTA | I2CR_MTX);
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
i2c_imx_bus_busy(i2c_imx, 0);
|
|
i2c_imx->stopped = 1;
|
|
} else {
|
|
/*
|
|
* For i2c master receiver repeat restart operation like:
|
|
* read -> repeat MSTA -> read/write
|
|
* The controller must set MTX before read the last byte in
|
|
* the first read operation, otherwise the first read cost
|
|
* one extra clock cycle.
|
|
*/
|
|
temp = readb(i2c_imx->base + IMX_I2C_I2CR);
|
|
temp |= I2CR_MTX;
|
|
writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
|
|
}
|
|
} else if (i == (msgs->len - 2)) {
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> set TXAK\n", __func__);
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp |= I2CR_TXAK;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
}
|
|
if ((!i) && block_data)
|
|
msgs->buf[0] = len;
|
|
else
|
|
msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> read byte: B%d=0x%X\n",
|
|
__func__, i, msgs->buf[i]);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_imx_xfer(struct i2c_adapter *adapter,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
unsigned int i, temp;
|
|
int result;
|
|
bool is_lastmsg = false;
|
|
struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
|
|
|
|
/* Start I2C transfer */
|
|
result = i2c_imx_start(i2c_imx);
|
|
if (result)
|
|
goto fail0;
|
|
|
|
/* read/write data */
|
|
for (i = 0; i < num; i++) {
|
|
if (i == num - 1)
|
|
is_lastmsg = true;
|
|
|
|
if (i) {
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> repeated start\n", __func__);
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
temp |= I2CR_RSTA;
|
|
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
|
|
result = i2c_imx_bus_busy(i2c_imx, 1);
|
|
if (result)
|
|
goto fail0;
|
|
}
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> transfer message: %d\n", __func__, i);
|
|
/* write/read data */
|
|
#ifdef CONFIG_I2C_DEBUG_BUS
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> CONTROL: IEN=%d, IIEN=%d, "
|
|
"MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n", __func__,
|
|
(temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0),
|
|
(temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0),
|
|
(temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0));
|
|
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
|
|
dev_dbg(&i2c_imx->adapter.dev,
|
|
"<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, "
|
|
"IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n", __func__,
|
|
(temp & I2SR_ICF ? 1 : 0), (temp & I2SR_IAAS ? 1 : 0),
|
|
(temp & I2SR_IBB ? 1 : 0), (temp & I2SR_IAL ? 1 : 0),
|
|
(temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0),
|
|
(temp & I2SR_RXAK ? 1 : 0));
|
|
#endif
|
|
if (msgs[i].flags & I2C_M_RD)
|
|
result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg);
|
|
else
|
|
result = i2c_imx_write(i2c_imx, &msgs[i]);
|
|
if (result)
|
|
goto fail0;
|
|
}
|
|
|
|
fail0:
|
|
/* Stop I2C transfer */
|
|
i2c_imx_stop(i2c_imx);
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__,
|
|
(result < 0) ? "error" : "success msg",
|
|
(result < 0) ? result : num);
|
|
return (result < 0) ? result : num;
|
|
}
|
|
|
|
static u32 i2c_imx_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
|
|
| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
|
|
}
|
|
|
|
static struct i2c_algorithm i2c_imx_algo = {
|
|
.master_xfer = i2c_imx_xfer,
|
|
.functionality = i2c_imx_func,
|
|
};
|
|
|
|
static int i2c_imx_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
|
|
&pdev->dev);
|
|
struct imx_i2c_struct *i2c_imx;
|
|
struct resource *res;
|
|
struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
void __iomem *base;
|
|
int irq, ret;
|
|
|
|
dev_dbg(&pdev->dev, "<%s>\n", __func__);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "can't get irq number\n");
|
|
return irq;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
i2c_imx = devm_kzalloc(&pdev->dev, sizeof(struct imx_i2c_struct),
|
|
GFP_KERNEL);
|
|
if (!i2c_imx)
|
|
return -ENOMEM;
|
|
|
|
if (of_id)
|
|
i2c_imx->hwdata = of_id->data;
|
|
else
|
|
i2c_imx->hwdata = (struct imx_i2c_hwdata *)
|
|
platform_get_device_id(pdev)->driver_data;
|
|
|
|
/* Setup i2c_imx driver structure */
|
|
strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
|
|
i2c_imx->adapter.owner = THIS_MODULE;
|
|
i2c_imx->adapter.algo = &i2c_imx_algo;
|
|
i2c_imx->adapter.dev.parent = &pdev->dev;
|
|
i2c_imx->adapter.nr = pdev->id;
|
|
i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
|
|
i2c_imx->base = base;
|
|
|
|
/* Get I2C clock */
|
|
i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(i2c_imx->clk)) {
|
|
dev_err(&pdev->dev, "can't get I2C clock\n");
|
|
return PTR_ERR(i2c_imx->clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(i2c_imx->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "can't enable I2C clock\n");
|
|
return ret;
|
|
}
|
|
/* Request IRQ */
|
|
ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
|
|
pdev->name, i2c_imx);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "can't claim irq %d\n", irq);
|
|
goto clk_disable;
|
|
}
|
|
|
|
/* Init queue */
|
|
init_waitqueue_head(&i2c_imx->queue);
|
|
|
|
/* Set up adapter data */
|
|
i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
|
|
|
|
/* Set up clock divider */
|
|
i2c_imx->bitrate = IMX_I2C_BIT_RATE;
|
|
ret = of_property_read_u32(pdev->dev.of_node,
|
|
"clock-frequency", &i2c_imx->bitrate);
|
|
if (ret < 0 && pdata && pdata->bitrate)
|
|
i2c_imx->bitrate = pdata->bitrate;
|
|
|
|
/* Set up chip registers to defaults */
|
|
imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
|
|
i2c_imx, IMX_I2C_I2CR);
|
|
imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
|
|
|
|
/* Add I2C adapter */
|
|
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "registration failed\n");
|
|
goto clk_disable;
|
|
}
|
|
|
|
/* Set up platform driver data */
|
|
platform_set_drvdata(pdev, i2c_imx);
|
|
clk_disable_unprepare(i2c_imx->clk);
|
|
|
|
dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
|
|
dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res);
|
|
dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n",
|
|
i2c_imx->adapter.name);
|
|
dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
|
|
|
|
return 0; /* Return OK */
|
|
|
|
clk_disable:
|
|
clk_disable_unprepare(i2c_imx->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_imx_remove(struct platform_device *pdev)
|
|
{
|
|
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
|
|
|
|
/* remove adapter */
|
|
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
|
|
i2c_del_adapter(&i2c_imx->adapter);
|
|
|
|
/* setup chip registers to defaults */
|
|
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
|
|
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
|
|
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR);
|
|
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver i2c_imx_driver = {
|
|
.probe = i2c_imx_probe,
|
|
.remove = i2c_imx_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = i2c_imx_dt_ids,
|
|
},
|
|
.id_table = imx_i2c_devtype,
|
|
};
|
|
|
|
static int __init i2c_adap_imx_init(void)
|
|
{
|
|
return platform_driver_register(&i2c_imx_driver);
|
|
}
|
|
subsys_initcall(i2c_adap_imx_init);
|
|
|
|
static void __exit i2c_adap_imx_exit(void)
|
|
{
|
|
platform_driver_unregister(&i2c_imx_driver);
|
|
}
|
|
module_exit(i2c_adap_imx_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Darius Augulis");
|
|
MODULE_DESCRIPTION("I2C adapter driver for IMX I2C bus");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|