mirror of https://gitee.com/openkylin/linux.git
2279 lines
58 KiB
C
2279 lines
58 KiB
C
/*********************************************************************
|
|
*
|
|
* Filename: ali-ircc.h
|
|
* Version: 0.5
|
|
* Description: Driver for the ALI M1535D and M1543C FIR Controller
|
|
* Status: Experimental.
|
|
* Author: Benjamin Kong <benjamin_kong@ali.com.tw>
|
|
* Created at: 2000/10/16 03:46PM
|
|
* Modified at: 2001/1/3 02:55PM
|
|
* Modified by: Benjamin Kong <benjamin_kong@ali.com.tw>
|
|
* Modified at: 2003/11/6 and support for ALi south-bridge chipsets M1563
|
|
* Modified by: Clear Zhang <clear_zhang@ali.com.tw>
|
|
*
|
|
* Copyright (c) 2000 Benjamin Kong <benjamin_kong@ali.com.tw>
|
|
* All Rights Reserved
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
********************************************************************/
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_legacy.h>
|
|
|
|
#include <net/irda/wrapper.h>
|
|
#include <net/irda/irda.h>
|
|
#include <net/irda/irda_device.h>
|
|
|
|
#include "ali-ircc.h"
|
|
|
|
#define CHIP_IO_EXTENT 8
|
|
#define BROKEN_DONGLE_ID
|
|
|
|
static char *driver_name = "ali-ircc";
|
|
|
|
/* Module parameters */
|
|
static int qos_mtt_bits = 0x07; /* 1 ms or more */
|
|
|
|
/* Use BIOS settions by default, but user may supply module parameters */
|
|
static unsigned int io[] = { ~0, ~0, ~0, ~0 };
|
|
static unsigned int irq[] = { 0, 0, 0, 0 };
|
|
static unsigned int dma[] = { 0, 0, 0, 0 };
|
|
|
|
static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
|
|
static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
|
|
static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
|
|
|
|
/* These are the currently known ALi sourth-bridge chipsets, the only one difference
|
|
* is that M1543C doesn't support HP HDSL-3600
|
|
*/
|
|
static ali_chip_t chips[] =
|
|
{
|
|
{ "M1543", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x43, ali_ircc_probe_53, ali_ircc_init_43 },
|
|
{ "M1535", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x53, ali_ircc_probe_53, ali_ircc_init_53 },
|
|
{ "M1563", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x63, ali_ircc_probe_53, ali_ircc_init_53 },
|
|
{ NULL }
|
|
};
|
|
|
|
/* Max 4 instances for now */
|
|
static struct ali_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
|
|
|
|
/* Dongle Types */
|
|
static char *dongle_types[] = {
|
|
"TFDS6000",
|
|
"HP HSDL-3600",
|
|
"HP HSDL-1100",
|
|
"No dongle connected",
|
|
};
|
|
|
|
/* Some prototypes */
|
|
static int ali_ircc_open(int i, chipio_t *info);
|
|
|
|
static int ali_ircc_close(struct ali_ircc_cb *self);
|
|
|
|
static int ali_ircc_setup(chipio_t *info);
|
|
static int ali_ircc_is_receiving(struct ali_ircc_cb *self);
|
|
static int ali_ircc_net_open(struct net_device *dev);
|
|
static int ali_ircc_net_close(struct net_device *dev);
|
|
static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static int ali_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data);
|
|
static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud);
|
|
static void ali_ircc_suspend(struct ali_ircc_cb *self);
|
|
static void ali_ircc_wakeup(struct ali_ircc_cb *self);
|
|
static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev);
|
|
|
|
/* SIR function */
|
|
static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self);
|
|
static void ali_ircc_sir_receive(struct ali_ircc_cb *self);
|
|
static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self);
|
|
static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
|
|
static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
|
|
|
|
/* FIR function */
|
|
static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
|
|
static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self);
|
|
static int ali_ircc_dma_receive(struct ali_ircc_cb *self);
|
|
static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self);
|
|
static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self);
|
|
static void ali_ircc_dma_xmit(struct ali_ircc_cb *self);
|
|
|
|
/* My Function */
|
|
static int ali_ircc_read_dongle_id (int i, chipio_t *info);
|
|
static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed);
|
|
|
|
/* ALi chip function */
|
|
static void SIR2FIR(int iobase);
|
|
static void FIR2SIR(int iobase);
|
|
static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable);
|
|
|
|
/*
|
|
* Function ali_ircc_init ()
|
|
*
|
|
* Initialize chip. Find out whay kinds of chips we are dealing with
|
|
* and their configuation registers address
|
|
*/
|
|
static int __init ali_ircc_init(void)
|
|
{
|
|
ali_chip_t *chip;
|
|
chipio_t info;
|
|
int ret = -ENODEV;
|
|
int cfg, cfg_base;
|
|
int reg, revision;
|
|
int i = 0;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
|
|
/* Probe for all the ALi chipsets we know about */
|
|
for (chip= chips; chip->name; chip++, i++)
|
|
{
|
|
IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, chip->name);
|
|
|
|
/* Try all config registers for this chip */
|
|
for (cfg=0; cfg<2; cfg++)
|
|
{
|
|
cfg_base = chip->cfg[cfg];
|
|
if (!cfg_base)
|
|
continue;
|
|
|
|
memset(&info, 0, sizeof(chipio_t));
|
|
info.cfg_base = cfg_base;
|
|
info.fir_base = io[i];
|
|
info.dma = dma[i];
|
|
info.irq = irq[i];
|
|
|
|
|
|
/* Enter Configuration */
|
|
outb(chip->entr1, cfg_base);
|
|
outb(chip->entr2, cfg_base);
|
|
|
|
/* Select Logical Device 5 Registers (UART2) */
|
|
outb(0x07, cfg_base);
|
|
outb(0x05, cfg_base+1);
|
|
|
|
/* Read Chip Identification Register */
|
|
outb(chip->cid_index, cfg_base);
|
|
reg = inb(cfg_base+1);
|
|
|
|
if (reg == chip->cid_value)
|
|
{
|
|
IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __FUNCTION__, cfg_base);
|
|
|
|
outb(0x1F, cfg_base);
|
|
revision = inb(cfg_base+1);
|
|
IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __FUNCTION__,
|
|
chip->name, revision);
|
|
|
|
/*
|
|
* If the user supplies the base address, then
|
|
* we init the chip, if not we probe the values
|
|
* set by the BIOS
|
|
*/
|
|
if (io[i] < 2000)
|
|
{
|
|
chip->init(chip, &info);
|
|
}
|
|
else
|
|
{
|
|
chip->probe(chip, &info);
|
|
}
|
|
|
|
if (ali_ircc_open(i, &info) == 0)
|
|
ret = 0;
|
|
i++;
|
|
}
|
|
else
|
|
{
|
|
IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __FUNCTION__, chip->name, cfg_base);
|
|
}
|
|
/* Exit configuration */
|
|
outb(0xbb, cfg_base);
|
|
}
|
|
}
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_cleanup ()
|
|
*
|
|
* Close all configured chips
|
|
*
|
|
*/
|
|
static void __exit ali_ircc_cleanup(void)
|
|
{
|
|
int i;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
|
|
pm_unregister_all(ali_ircc_pmproc);
|
|
|
|
for (i=0; i < 4; i++) {
|
|
if (dev_self[i])
|
|
ali_ircc_close(dev_self[i]);
|
|
}
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_open (int i, chipio_t *inf)
|
|
*
|
|
* Open driver instance
|
|
*
|
|
*/
|
|
static int ali_ircc_open(int i, chipio_t *info)
|
|
{
|
|
struct net_device *dev;
|
|
struct ali_ircc_cb *self;
|
|
struct pm_dev *pmdev;
|
|
int dongle_id;
|
|
int err;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
|
|
/* Set FIR FIFO and DMA Threshold */
|
|
if ((ali_ircc_setup(info)) == -1)
|
|
return -1;
|
|
|
|
dev = alloc_irdadev(sizeof(*self));
|
|
if (dev == NULL) {
|
|
IRDA_ERROR("%s(), can't allocate memory for control block!\n",
|
|
__FUNCTION__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
self = dev->priv;
|
|
self->netdev = dev;
|
|
spin_lock_init(&self->lock);
|
|
|
|
/* Need to store self somewhere */
|
|
dev_self[i] = self;
|
|
self->index = i;
|
|
|
|
/* Initialize IO */
|
|
self->io.cfg_base = info->cfg_base; /* In ali_ircc_probe_53 assign */
|
|
self->io.fir_base = info->fir_base; /* info->sir_base = info->fir_base */
|
|
self->io.sir_base = info->sir_base; /* ALi SIR and FIR use the same address */
|
|
self->io.irq = info->irq;
|
|
self->io.fir_ext = CHIP_IO_EXTENT;
|
|
self->io.dma = info->dma;
|
|
self->io.fifo_size = 16; /* SIR: 16, FIR: 32 Benjamin 2000/11/1 */
|
|
|
|
/* Reserve the ioports that we need */
|
|
if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) {
|
|
IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__,
|
|
self->io.fir_base);
|
|
err = -ENODEV;
|
|
goto err_out1;
|
|
}
|
|
|
|
/* Initialize QoS for this device */
|
|
irda_init_max_qos_capabilies(&self->qos);
|
|
|
|
/* The only value we must override it the baudrate */
|
|
self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
|
|
IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); // benjamin 2000/11/8 05:27PM
|
|
|
|
self->qos.min_turn_time.bits = qos_mtt_bits;
|
|
|
|
irda_qos_bits_to_value(&self->qos);
|
|
|
|
/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
|
|
self->rx_buff.truesize = 14384;
|
|
self->tx_buff.truesize = 14384;
|
|
|
|
/* Allocate memory if needed */
|
|
self->rx_buff.head =
|
|
dma_alloc_coherent(NULL, self->rx_buff.truesize,
|
|
&self->rx_buff_dma, GFP_KERNEL);
|
|
if (self->rx_buff.head == NULL) {
|
|
err = -ENOMEM;
|
|
goto err_out2;
|
|
}
|
|
memset(self->rx_buff.head, 0, self->rx_buff.truesize);
|
|
|
|
self->tx_buff.head =
|
|
dma_alloc_coherent(NULL, self->tx_buff.truesize,
|
|
&self->tx_buff_dma, GFP_KERNEL);
|
|
if (self->tx_buff.head == NULL) {
|
|
err = -ENOMEM;
|
|
goto err_out3;
|
|
}
|
|
memset(self->tx_buff.head, 0, self->tx_buff.truesize);
|
|
|
|
self->rx_buff.in_frame = FALSE;
|
|
self->rx_buff.state = OUTSIDE_FRAME;
|
|
self->tx_buff.data = self->tx_buff.head;
|
|
self->rx_buff.data = self->rx_buff.head;
|
|
|
|
/* Reset Tx queue info */
|
|
self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
|
|
self->tx_fifo.tail = self->tx_buff.head;
|
|
|
|
|
|
/* Keep track of module usage */
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
/* Override the network functions we need to use */
|
|
dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
|
|
dev->open = ali_ircc_net_open;
|
|
dev->stop = ali_ircc_net_close;
|
|
dev->do_ioctl = ali_ircc_net_ioctl;
|
|
dev->get_stats = ali_ircc_net_get_stats;
|
|
|
|
err = register_netdev(dev);
|
|
if (err) {
|
|
IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__);
|
|
goto err_out4;
|
|
}
|
|
IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
|
|
|
|
/* Check dongle id */
|
|
dongle_id = ali_ircc_read_dongle_id(i, info);
|
|
IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __FUNCTION__, driver_name, dongle_types[dongle_id]);
|
|
|
|
self->io.dongle_id = dongle_id;
|
|
|
|
pmdev = pm_register(PM_SYS_DEV, PM_SYS_IRDA, ali_ircc_pmproc);
|
|
if (pmdev)
|
|
pmdev->data = self;
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
|
|
|
|
return 0;
|
|
|
|
err_out4:
|
|
dma_free_coherent(NULL, self->tx_buff.truesize,
|
|
self->tx_buff.head, self->tx_buff_dma);
|
|
err_out3:
|
|
dma_free_coherent(NULL, self->rx_buff.truesize,
|
|
self->rx_buff.head, self->rx_buff_dma);
|
|
err_out2:
|
|
release_region(self->io.fir_base, self->io.fir_ext);
|
|
err_out1:
|
|
dev_self[i] = NULL;
|
|
free_netdev(dev);
|
|
return err;
|
|
}
|
|
|
|
|
|
/*
|
|
* Function ali_ircc_close (self)
|
|
*
|
|
* Close driver instance
|
|
*
|
|
*/
|
|
static int __exit ali_ircc_close(struct ali_ircc_cb *self)
|
|
{
|
|
int iobase;
|
|
|
|
IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
|
|
IRDA_ASSERT(self != NULL, return -1;);
|
|
|
|
iobase = self->io.fir_base;
|
|
|
|
/* Remove netdevice */
|
|
unregister_netdev(self->netdev);
|
|
|
|
/* Release the PORT that this driver is using */
|
|
IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __FUNCTION__, self->io.fir_base);
|
|
release_region(self->io.fir_base, self->io.fir_ext);
|
|
|
|
if (self->tx_buff.head)
|
|
dma_free_coherent(NULL, self->tx_buff.truesize,
|
|
self->tx_buff.head, self->tx_buff_dma);
|
|
|
|
if (self->rx_buff.head)
|
|
dma_free_coherent(NULL, self->rx_buff.truesize,
|
|
self->rx_buff.head, self->rx_buff_dma);
|
|
|
|
dev_self[self->index] = NULL;
|
|
free_netdev(self->netdev);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_init_43 (chip, info)
|
|
*
|
|
* Initialize the ALi M1543 chip.
|
|
*/
|
|
static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info)
|
|
{
|
|
/* All controller information like I/O address, DMA channel, IRQ
|
|
* are set by BIOS
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_init_53 (chip, info)
|
|
*
|
|
* Initialize the ALi M1535 chip.
|
|
*/
|
|
static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info)
|
|
{
|
|
/* All controller information like I/O address, DMA channel, IRQ
|
|
* are set by BIOS
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_probe_53 (chip, info)
|
|
*
|
|
* Probes for the ALi M1535D or M1535
|
|
*/
|
|
static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
|
|
{
|
|
int cfg_base = info->cfg_base;
|
|
int hi, low, reg;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
|
|
/* Enter Configuration */
|
|
outb(chip->entr1, cfg_base);
|
|
outb(chip->entr2, cfg_base);
|
|
|
|
/* Select Logical Device 5 Registers (UART2) */
|
|
outb(0x07, cfg_base);
|
|
outb(0x05, cfg_base+1);
|
|
|
|
/* Read address control register */
|
|
outb(0x60, cfg_base);
|
|
hi = inb(cfg_base+1);
|
|
outb(0x61, cfg_base);
|
|
low = inb(cfg_base+1);
|
|
info->fir_base = (hi<<8) + low;
|
|
|
|
info->sir_base = info->fir_base;
|
|
|
|
IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, info->fir_base);
|
|
|
|
/* Read IRQ control register */
|
|
outb(0x70, cfg_base);
|
|
reg = inb(cfg_base+1);
|
|
info->irq = reg & 0x0f;
|
|
IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq);
|
|
|
|
/* Read DMA channel */
|
|
outb(0x74, cfg_base);
|
|
reg = inb(cfg_base+1);
|
|
info->dma = reg & 0x07;
|
|
|
|
if(info->dma == 0x04)
|
|
IRDA_WARNING("%s(), No DMA channel assigned !\n", __FUNCTION__);
|
|
else
|
|
IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma);
|
|
|
|
/* Read Enabled Status */
|
|
outb(0x30, cfg_base);
|
|
reg = inb(cfg_base+1);
|
|
info->enabled = (reg & 0x80) && (reg & 0x01);
|
|
IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __FUNCTION__, info->enabled);
|
|
|
|
/* Read Power Status */
|
|
outb(0x22, cfg_base);
|
|
reg = inb(cfg_base+1);
|
|
info->suspended = (reg & 0x20);
|
|
IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __FUNCTION__, info->suspended);
|
|
|
|
/* Exit configuration */
|
|
outb(0xbb, cfg_base);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_setup (info)
|
|
*
|
|
* Set FIR FIFO and DMA Threshold
|
|
* Returns non-negative on success.
|
|
*
|
|
*/
|
|
static int ali_ircc_setup(chipio_t *info)
|
|
{
|
|
unsigned char tmp;
|
|
int version;
|
|
int iobase = info->fir_base;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
|
|
/* Locking comments :
|
|
* Most operations here need to be protected. We are called before
|
|
* the device instance is created in ali_ircc_open(), therefore
|
|
* nobody can bother us - Jean II */
|
|
|
|
/* Switch to FIR space */
|
|
SIR2FIR(iobase);
|
|
|
|
/* Master Reset */
|
|
outb(0x40, iobase+FIR_MCR); // benjamin 2000/11/30 11:45AM
|
|
|
|
/* Read FIR ID Version Register */
|
|
switch_bank(iobase, BANK3);
|
|
version = inb(iobase+FIR_ID_VR);
|
|
|
|
/* Should be 0x00 in the M1535/M1535D */
|
|
if(version != 0x00)
|
|
{
|
|
IRDA_ERROR("%s, Wrong chip version %02x\n", driver_name, version);
|
|
return -1;
|
|
}
|
|
|
|
// IRDA_MESSAGE("%s, Found chip at base=0x%03x\n", driver_name, info->cfg_base);
|
|
|
|
/* Set FIR FIFO Threshold Register */
|
|
switch_bank(iobase, BANK1);
|
|
outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
|
|
|
|
/* Set FIR DMA Threshold Register */
|
|
outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
|
|
|
|
/* CRC enable */
|
|
switch_bank(iobase, BANK2);
|
|
outb(inb(iobase+FIR_IRDA_CR) | IRDA_CR_CRC, iobase+FIR_IRDA_CR);
|
|
|
|
/* NDIS driver set TX Length here BANK2 Alias 3, Alias4*/
|
|
|
|
/* Switch to Bank 0 */
|
|
switch_bank(iobase, BANK0);
|
|
|
|
tmp = inb(iobase+FIR_LCR_B);
|
|
tmp &=~0x20; // disable SIP
|
|
tmp |= 0x80; // these two steps make RX mode
|
|
tmp &= 0xbf;
|
|
outb(tmp, iobase+FIR_LCR_B);
|
|
|
|
/* Disable Interrupt */
|
|
outb(0x00, iobase+FIR_IER);
|
|
|
|
|
|
/* Switch to SIR space */
|
|
FIR2SIR(iobase);
|
|
|
|
IRDA_MESSAGE("%s, driver loaded (Benjamin Kong)\n", driver_name);
|
|
|
|
/* Enable receive interrupts */
|
|
// outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
|
|
// Turn on the interrupts in ali_ircc_net_open
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_read_dongle_id (int index, info)
|
|
*
|
|
* Try to read dongle indentification. This procedure needs to be executed
|
|
* once after power-on/reset. It also needs to be used whenever you suspect
|
|
* that the user may have plugged/unplugged the IrDA Dongle.
|
|
*/
|
|
static int ali_ircc_read_dongle_id (int i, chipio_t *info)
|
|
{
|
|
int dongle_id, reg;
|
|
int cfg_base = info->cfg_base;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
|
|
/* Enter Configuration */
|
|
outb(chips[i].entr1, cfg_base);
|
|
outb(chips[i].entr2, cfg_base);
|
|
|
|
/* Select Logical Device 5 Registers (UART2) */
|
|
outb(0x07, cfg_base);
|
|
outb(0x05, cfg_base+1);
|
|
|
|
/* Read Dongle ID */
|
|
outb(0xf0, cfg_base);
|
|
reg = inb(cfg_base+1);
|
|
dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
|
|
IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __FUNCTION__,
|
|
dongle_id, dongle_types[dongle_id]);
|
|
|
|
/* Exit configuration */
|
|
outb(0xbb, cfg_base);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
|
|
|
|
return dongle_id;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_interrupt (irq, dev_id, regs)
|
|
*
|
|
* An interrupt from the chip has arrived. Time to do some work
|
|
*
|
|
*/
|
|
static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id,
|
|
struct pt_regs *regs)
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_id;
|
|
struct ali_ircc_cb *self;
|
|
int ret;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
|
|
if (!dev) {
|
|
IRDA_WARNING("%s: irq %d for unknown device.\n", driver_name, irq);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
self = (struct ali_ircc_cb *) dev->priv;
|
|
|
|
spin_lock(&self->lock);
|
|
|
|
/* Dispatch interrupt handler for the current speed */
|
|
if (self->io.speed > 115200)
|
|
ret = ali_ircc_fir_interrupt(self);
|
|
else
|
|
ret = ali_ircc_sir_interrupt(self);
|
|
|
|
spin_unlock(&self->lock);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
|
|
return ret;
|
|
}
|
|
/*
|
|
* Function ali_ircc_fir_interrupt(irq, struct ali_ircc_cb *self)
|
|
*
|
|
* Handle MIR/FIR interrupt
|
|
*
|
|
*/
|
|
static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
|
|
{
|
|
__u8 eir, OldMessageCount;
|
|
int iobase, tmp;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
|
|
iobase = self->io.fir_base;
|
|
|
|
switch_bank(iobase, BANK0);
|
|
self->InterruptID = inb(iobase+FIR_IIR);
|
|
self->BusStatus = inb(iobase+FIR_BSR);
|
|
|
|
OldMessageCount = (self->LineStatus + 1) & 0x07;
|
|
self->LineStatus = inb(iobase+FIR_LSR);
|
|
//self->ier = inb(iobase+FIR_IER); 2000/12/1 04:32PM
|
|
eir = self->InterruptID & self->ier; /* Mask out the interesting ones */
|
|
|
|
IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __FUNCTION__,self->InterruptID);
|
|
IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __FUNCTION__,self->LineStatus);
|
|
IRDA_DEBUG(1, "%s(), self->ier = %x\n", __FUNCTION__,self->ier);
|
|
IRDA_DEBUG(1, "%s(), eir = %x\n", __FUNCTION__,eir);
|
|
|
|
/* Disable interrupts */
|
|
SetCOMInterrupts(self, FALSE);
|
|
|
|
/* Tx or Rx Interrupt */
|
|
|
|
if (eir & IIR_EOM)
|
|
{
|
|
if (self->io.direction == IO_XMIT) /* TX */
|
|
{
|
|
IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __FUNCTION__);
|
|
|
|
if(ali_ircc_dma_xmit_complete(self))
|
|
{
|
|
if (irda_device_txqueue_empty(self->netdev))
|
|
{
|
|
/* Prepare for receive */
|
|
ali_ircc_dma_receive(self);
|
|
self->ier = IER_EOM;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
self->ier = IER_EOM;
|
|
}
|
|
|
|
}
|
|
else /* RX */
|
|
{
|
|
IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __FUNCTION__);
|
|
|
|
if(OldMessageCount > ((self->LineStatus+1) & 0x07))
|
|
{
|
|
self->rcvFramesOverflow = TRUE;
|
|
IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __FUNCTION__);
|
|
}
|
|
|
|
if (ali_ircc_dma_receive_complete(self))
|
|
{
|
|
IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __FUNCTION__);
|
|
|
|
self->ier = IER_EOM;
|
|
}
|
|
else
|
|
{
|
|
IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __FUNCTION__);
|
|
|
|
self->ier = IER_EOM | IER_TIMER;
|
|
}
|
|
|
|
}
|
|
}
|
|
/* Timer Interrupt */
|
|
else if (eir & IIR_TIMER)
|
|
{
|
|
if(OldMessageCount > ((self->LineStatus+1) & 0x07))
|
|
{
|
|
self->rcvFramesOverflow = TRUE;
|
|
IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __FUNCTION__);
|
|
}
|
|
/* Disable Timer */
|
|
switch_bank(iobase, BANK1);
|
|
tmp = inb(iobase+FIR_CR);
|
|
outb( tmp& ~CR_TIMER_EN, iobase+FIR_CR);
|
|
|
|
/* Check if this is a Tx timer interrupt */
|
|
if (self->io.direction == IO_XMIT)
|
|
{
|
|
ali_ircc_dma_xmit(self);
|
|
|
|
/* Interrupt on EOM */
|
|
self->ier = IER_EOM;
|
|
|
|
}
|
|
else /* Rx */
|
|
{
|
|
if(ali_ircc_dma_receive_complete(self))
|
|
{
|
|
self->ier = IER_EOM;
|
|
}
|
|
else
|
|
{
|
|
self->ier = IER_EOM | IER_TIMER;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Restore Interrupt */
|
|
SetCOMInterrupts(self, TRUE);
|
|
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __FUNCTION__);
|
|
return IRQ_RETVAL(eir);
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_sir_interrupt (irq, self, eir)
|
|
*
|
|
* Handle SIR interrupt
|
|
*
|
|
*/
|
|
static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
|
|
{
|
|
int iobase;
|
|
int iir, lsr;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
|
|
iobase = self->io.sir_base;
|
|
|
|
iir = inb(iobase+UART_IIR) & UART_IIR_ID;
|
|
if (iir) {
|
|
/* Clear interrupt */
|
|
lsr = inb(iobase+UART_LSR);
|
|
|
|
IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__,
|
|
iir, lsr, iobase);
|
|
|
|
switch (iir)
|
|
{
|
|
case UART_IIR_RLSI:
|
|
IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__);
|
|
break;
|
|
case UART_IIR_RDI:
|
|
/* Receive interrupt */
|
|
ali_ircc_sir_receive(self);
|
|
break;
|
|
case UART_IIR_THRI:
|
|
if (lsr & UART_LSR_THRE)
|
|
{
|
|
/* Transmitter ready for data */
|
|
ali_ircc_sir_write_wakeup(self);
|
|
}
|
|
break;
|
|
default:
|
|
IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir);
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__);
|
|
|
|
return IRQ_RETVAL(iir);
|
|
}
|
|
|
|
|
|
/*
|
|
* Function ali_ircc_sir_receive (self)
|
|
*
|
|
* Receive one frame from the infrared port
|
|
*
|
|
*/
|
|
static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
|
|
{
|
|
int boguscount = 0;
|
|
int iobase;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__);
|
|
IRDA_ASSERT(self != NULL, return;);
|
|
|
|
iobase = self->io.sir_base;
|
|
|
|
/*
|
|
* Receive all characters in Rx FIFO, unwrap and unstuff them.
|
|
* async_unwrap_char will deliver all found frames
|
|
*/
|
|
do {
|
|
async_unwrap_char(self->netdev, &self->stats, &self->rx_buff,
|
|
inb(iobase+UART_RX));
|
|
|
|
/* Make sure we don't stay here too long */
|
|
if (boguscount++ > 32) {
|
|
IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__);
|
|
break;
|
|
}
|
|
} while (inb(iobase+UART_LSR) & UART_LSR_DR);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_sir_write_wakeup (tty)
|
|
*
|
|
* Called by the driver when there's room for more data. If we have
|
|
* more packets to send, we send them here.
|
|
*
|
|
*/
|
|
static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
|
|
{
|
|
int actual = 0;
|
|
int iobase;
|
|
|
|
IRDA_ASSERT(self != NULL, return;);
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
iobase = self->io.sir_base;
|
|
|
|
/* Finished with frame? */
|
|
if (self->tx_buff.len > 0)
|
|
{
|
|
/* Write data left in transmit buffer */
|
|
actual = ali_ircc_sir_write(iobase, self->io.fifo_size,
|
|
self->tx_buff.data, self->tx_buff.len);
|
|
self->tx_buff.data += actual;
|
|
self->tx_buff.len -= actual;
|
|
}
|
|
else
|
|
{
|
|
if (self->new_speed)
|
|
{
|
|
/* We must wait until all data are gone */
|
|
while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
|
|
IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __FUNCTION__ );
|
|
|
|
IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __FUNCTION__ , self->new_speed);
|
|
ali_ircc_change_speed(self, self->new_speed);
|
|
self->new_speed = 0;
|
|
|
|
// benjamin 2000/11/10 06:32PM
|
|
if (self->io.speed > 115200)
|
|
{
|
|
IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __FUNCTION__ );
|
|
|
|
self->ier = IER_EOM;
|
|
// SetCOMInterrupts(self, TRUE);
|
|
return;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
netif_wake_queue(self->netdev);
|
|
}
|
|
|
|
self->stats.tx_packets++;
|
|
|
|
/* Turn on receive interrupts */
|
|
outb(UART_IER_RDI, iobase+UART_IER);
|
|
}
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
|
|
{
|
|
struct net_device *dev = self->netdev;
|
|
int iobase;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
IRDA_DEBUG(2, "%s(), setting speed = %d \n", __FUNCTION__ , baud);
|
|
|
|
/* This function *must* be called with irq off and spin-lock.
|
|
* - Jean II */
|
|
|
|
iobase = self->io.fir_base;
|
|
|
|
SetCOMInterrupts(self, FALSE); // 2000/11/24 11:43AM
|
|
|
|
/* Go to MIR, FIR Speed */
|
|
if (baud > 115200)
|
|
{
|
|
|
|
|
|
ali_ircc_fir_change_speed(self, baud);
|
|
|
|
/* Install FIR xmit handler*/
|
|
dev->hard_start_xmit = ali_ircc_fir_hard_xmit;
|
|
|
|
/* Enable Interuupt */
|
|
self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
|
|
|
|
/* Be ready for incomming frames */
|
|
ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete
|
|
}
|
|
/* Go to SIR Speed */
|
|
else
|
|
{
|
|
ali_ircc_sir_change_speed(self, baud);
|
|
|
|
/* Install SIR xmit handler*/
|
|
dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
|
|
}
|
|
|
|
|
|
SetCOMInterrupts(self, TRUE); // 2000/11/24 11:43AM
|
|
|
|
netif_wake_queue(self->netdev);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
|
|
{
|
|
|
|
int iobase;
|
|
struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
|
|
struct net_device *dev;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
IRDA_ASSERT(self != NULL, return;);
|
|
|
|
dev = self->netdev;
|
|
iobase = self->io.fir_base;
|
|
|
|
IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __FUNCTION__ ,self->io.speed,baud);
|
|
|
|
/* Come from SIR speed */
|
|
if(self->io.speed <=115200)
|
|
{
|
|
SIR2FIR(iobase);
|
|
}
|
|
|
|
/* Update accounting for new speed */
|
|
self->io.speed = baud;
|
|
|
|
// Set Dongle Speed mode
|
|
ali_ircc_change_dongle_speed(self, baud);
|
|
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
/*
|
|
* Function ali_sir_change_speed (self, speed)
|
|
*
|
|
* Set speed of IrDA port to specified baudrate
|
|
*
|
|
*/
|
|
static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
|
|
{
|
|
struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
|
|
unsigned long flags;
|
|
int iobase;
|
|
int fcr; /* FIFO control reg */
|
|
int lcr; /* Line control reg */
|
|
int divisor;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __FUNCTION__ , speed);
|
|
|
|
IRDA_ASSERT(self != NULL, return;);
|
|
|
|
iobase = self->io.sir_base;
|
|
|
|
/* Come from MIR or FIR speed */
|
|
if(self->io.speed >115200)
|
|
{
|
|
// Set Dongle Speed mode first
|
|
ali_ircc_change_dongle_speed(self, speed);
|
|
|
|
FIR2SIR(iobase);
|
|
}
|
|
|
|
// Clear Line and Auxiluary status registers 2000/11/24 11:47AM
|
|
|
|
inb(iobase+UART_LSR);
|
|
inb(iobase+UART_SCR);
|
|
|
|
/* Update accounting for new speed */
|
|
self->io.speed = speed;
|
|
|
|
spin_lock_irqsave(&self->lock, flags);
|
|
|
|
divisor = 115200/speed;
|
|
|
|
fcr = UART_FCR_ENABLE_FIFO;
|
|
|
|
/*
|
|
* Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
|
|
* almost 1,7 ms at 19200 bps. At speeds above that we can just forget
|
|
* about this timeout since it will always be fast enough.
|
|
*/
|
|
if (self->io.speed < 38400)
|
|
fcr |= UART_FCR_TRIGGER_1;
|
|
else
|
|
fcr |= UART_FCR_TRIGGER_14;
|
|
|
|
/* IrDA ports use 8N1 */
|
|
lcr = UART_LCR_WLEN8;
|
|
|
|
outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */
|
|
outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */
|
|
outb(divisor >> 8, iobase+UART_DLM);
|
|
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
|
|
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
|
|
|
|
/* without this, the conection will be broken after come back from FIR speed,
|
|
but with this, the SIR connection is harder to established */
|
|
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
|
|
|
|
spin_unlock_irqrestore(&self->lock, flags);
|
|
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
|
|
{
|
|
|
|
struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
|
|
int iobase,dongle_id;
|
|
int tmp = 0;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
iobase = self->io.fir_base; /* or iobase = self->io.sir_base; */
|
|
dongle_id = self->io.dongle_id;
|
|
|
|
/* We are already locked, no need to do it again */
|
|
|
|
IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __FUNCTION__ , dongle_types[dongle_id], speed);
|
|
|
|
switch_bank(iobase, BANK2);
|
|
tmp = inb(iobase+FIR_IRDA_CR);
|
|
|
|
/* IBM type dongle */
|
|
if(dongle_id == 0)
|
|
{
|
|
if(speed == 4000000)
|
|
{
|
|
// __ __
|
|
// SD/MODE __| |__ __
|
|
// __ __
|
|
// IRTX __ __| |__
|
|
// T1 T2 T3 T4 T5
|
|
|
|
tmp &= ~IRDA_CR_HDLC; // HDLC=0
|
|
tmp |= IRDA_CR_CRC; // CRC=1
|
|
|
|
switch_bank(iobase, BANK2);
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
|
|
// T1 -> SD/MODE:0 IRTX:0
|
|
tmp &= ~0x09;
|
|
tmp |= 0x02;
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
udelay(2);
|
|
|
|
// T2 -> SD/MODE:1 IRTX:0
|
|
tmp &= ~0x01;
|
|
tmp |= 0x0a;
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
udelay(2);
|
|
|
|
// T3 -> SD/MODE:1 IRTX:1
|
|
tmp |= 0x0b;
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
udelay(2);
|
|
|
|
// T4 -> SD/MODE:0 IRTX:1
|
|
tmp &= ~0x08;
|
|
tmp |= 0x03;
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
udelay(2);
|
|
|
|
// T5 -> SD/MODE:0 IRTX:0
|
|
tmp &= ~0x09;
|
|
tmp |= 0x02;
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
udelay(2);
|
|
|
|
// reset -> Normal TX output Signal
|
|
outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
|
|
}
|
|
else /* speed <=1152000 */
|
|
{
|
|
// __
|
|
// SD/MODE __| |__
|
|
//
|
|
// IRTX ________
|
|
// T1 T2 T3
|
|
|
|
/* MIR 115200, 57600 */
|
|
if (speed==1152000)
|
|
{
|
|
tmp |= 0xA0; //HDLC=1, 1.152Mbps=1
|
|
}
|
|
else
|
|
{
|
|
tmp &=~0x80; //HDLC 0.576Mbps
|
|
tmp |= 0x20; //HDLC=1,
|
|
}
|
|
|
|
tmp |= IRDA_CR_CRC; // CRC=1
|
|
|
|
switch_bank(iobase, BANK2);
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
|
|
/* MIR 115200, 57600 */
|
|
|
|
//switch_bank(iobase, BANK2);
|
|
// T1 -> SD/MODE:0 IRTX:0
|
|
tmp &= ~0x09;
|
|
tmp |= 0x02;
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
udelay(2);
|
|
|
|
// T2 -> SD/MODE:1 IRTX:0
|
|
tmp &= ~0x01;
|
|
tmp |= 0x0a;
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
|
|
// T3 -> SD/MODE:0 IRTX:0
|
|
tmp &= ~0x09;
|
|
tmp |= 0x02;
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
udelay(2);
|
|
|
|
// reset -> Normal TX output Signal
|
|
outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
|
|
}
|
|
}
|
|
else if (dongle_id == 1) /* HP HDSL-3600 */
|
|
{
|
|
switch(speed)
|
|
{
|
|
case 4000000:
|
|
tmp &= ~IRDA_CR_HDLC; // HDLC=0
|
|
break;
|
|
|
|
case 1152000:
|
|
tmp |= 0xA0; // HDLC=1, 1.152Mbps=1
|
|
break;
|
|
|
|
case 576000:
|
|
tmp &=~0x80; // HDLC 0.576Mbps
|
|
tmp |= 0x20; // HDLC=1,
|
|
break;
|
|
}
|
|
|
|
tmp |= IRDA_CR_CRC; // CRC=1
|
|
|
|
switch_bank(iobase, BANK2);
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
}
|
|
else /* HP HDSL-1100 */
|
|
{
|
|
if(speed <= 115200) /* SIR */
|
|
{
|
|
|
|
tmp &= ~IRDA_CR_FIR_SIN; // HP sin select = 0
|
|
|
|
switch_bank(iobase, BANK2);
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
}
|
|
else /* MIR FIR */
|
|
{
|
|
|
|
switch(speed)
|
|
{
|
|
case 4000000:
|
|
tmp &= ~IRDA_CR_HDLC; // HDLC=0
|
|
break;
|
|
|
|
case 1152000:
|
|
tmp |= 0xA0; // HDLC=1, 1.152Mbps=1
|
|
break;
|
|
|
|
case 576000:
|
|
tmp &=~0x80; // HDLC 0.576Mbps
|
|
tmp |= 0x20; // HDLC=1,
|
|
break;
|
|
}
|
|
|
|
tmp |= IRDA_CR_CRC; // CRC=1
|
|
tmp |= IRDA_CR_FIR_SIN; // HP sin select = 1
|
|
|
|
switch_bank(iobase, BANK2);
|
|
outb(tmp, iobase+FIR_IRDA_CR);
|
|
}
|
|
}
|
|
|
|
switch_bank(iobase, BANK0);
|
|
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_sir_write (driver)
|
|
*
|
|
* Fill Tx FIFO with transmit data
|
|
*
|
|
*/
|
|
static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
|
|
{
|
|
int actual = 0;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
/* Tx FIFO should be empty! */
|
|
if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
|
|
IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __FUNCTION__ );
|
|
return 0;
|
|
}
|
|
|
|
/* Fill FIFO with current frame */
|
|
while ((fifo_size-- > 0) && (actual < len)) {
|
|
/* Transmit next byte */
|
|
outb(buf[actual], iobase+UART_TX);
|
|
|
|
actual++;
|
|
}
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
return actual;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_net_open (dev)
|
|
*
|
|
* Start the device
|
|
*
|
|
*/
|
|
static int ali_ircc_net_open(struct net_device *dev)
|
|
{
|
|
struct ali_ircc_cb *self;
|
|
int iobase;
|
|
char hwname[32];
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
IRDA_ASSERT(dev != NULL, return -1;);
|
|
|
|
self = (struct ali_ircc_cb *) dev->priv;
|
|
|
|
IRDA_ASSERT(self != NULL, return 0;);
|
|
|
|
iobase = self->io.fir_base;
|
|
|
|
/* Request IRQ and install Interrupt Handler */
|
|
if (request_irq(self->io.irq, ali_ircc_interrupt, 0, dev->name, dev))
|
|
{
|
|
IRDA_WARNING("%s, unable to allocate irq=%d\n", driver_name,
|
|
self->io.irq);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* Always allocate the DMA channel after the IRQ, and clean up on
|
|
* failure.
|
|
*/
|
|
if (request_dma(self->io.dma, dev->name)) {
|
|
IRDA_WARNING("%s, unable to allocate dma=%d\n", driver_name,
|
|
self->io.dma);
|
|
free_irq(self->io.irq, self);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* Turn on interrups */
|
|
outb(UART_IER_RDI , iobase+UART_IER);
|
|
|
|
/* Ready to play! */
|
|
netif_start_queue(dev); //benjamin by irport
|
|
|
|
/* Give self a hardware name */
|
|
sprintf(hwname, "ALI-FIR @ 0x%03x", self->io.fir_base);
|
|
|
|
/*
|
|
* Open new IrLAP layer instance, now that everything should be
|
|
* initialized properly
|
|
*/
|
|
self->irlap = irlap_open(dev, &self->qos, hwname);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_net_close (dev)
|
|
*
|
|
* Stop the device
|
|
*
|
|
*/
|
|
static int ali_ircc_net_close(struct net_device *dev)
|
|
{
|
|
|
|
struct ali_ircc_cb *self;
|
|
//int iobase;
|
|
|
|
IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
IRDA_ASSERT(dev != NULL, return -1;);
|
|
|
|
self = (struct ali_ircc_cb *) dev->priv;
|
|
IRDA_ASSERT(self != NULL, return 0;);
|
|
|
|
/* Stop device */
|
|
netif_stop_queue(dev);
|
|
|
|
/* Stop and remove instance of IrLAP */
|
|
if (self->irlap)
|
|
irlap_close(self->irlap);
|
|
self->irlap = NULL;
|
|
|
|
disable_dma(self->io.dma);
|
|
|
|
/* Disable interrupts */
|
|
SetCOMInterrupts(self, FALSE);
|
|
|
|
free_irq(self->io.irq, dev);
|
|
free_dma(self->io.dma);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_fir_hard_xmit (skb, dev)
|
|
*
|
|
* Transmit the frame
|
|
*
|
|
*/
|
|
static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct ali_ircc_cb *self;
|
|
unsigned long flags;
|
|
int iobase;
|
|
__u32 speed;
|
|
int mtt, diff;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
|
|
|
|
self = (struct ali_ircc_cb *) dev->priv;
|
|
iobase = self->io.fir_base;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* Make sure tests *& speed change are atomic */
|
|
spin_lock_irqsave(&self->lock, flags);
|
|
|
|
/* Note : you should make sure that speed changes are not going
|
|
* to corrupt any outgoing frame. Look at nsc-ircc for the gory
|
|
* details - Jean II */
|
|
|
|
/* Check if we need to change the speed */
|
|
speed = irda_get_next_speed(skb);
|
|
if ((speed != self->io.speed) && (speed != -1)) {
|
|
/* Check for empty frame */
|
|
if (!skb->len) {
|
|
ali_ircc_change_speed(self, speed);
|
|
dev->trans_start = jiffies;
|
|
spin_unlock_irqrestore(&self->lock, flags);
|
|
dev_kfree_skb(skb);
|
|
return 0;
|
|
} else
|
|
self->new_speed = speed;
|
|
}
|
|
|
|
/* Register and copy this frame to DMA memory */
|
|
self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
|
|
self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
|
|
self->tx_fifo.tail += skb->len;
|
|
|
|
self->stats.tx_bytes += skb->len;
|
|
|
|
memcpy(self->tx_fifo.queue[self->tx_fifo.free].start, skb->data,
|
|
skb->len);
|
|
|
|
self->tx_fifo.len++;
|
|
self->tx_fifo.free++;
|
|
|
|
/* Start transmit only if there is currently no transmit going on */
|
|
if (self->tx_fifo.len == 1)
|
|
{
|
|
/* Check if we must wait the min turn time or not */
|
|
mtt = irda_get_mtt(skb);
|
|
|
|
if (mtt)
|
|
{
|
|
/* Check how much time we have used already */
|
|
do_gettimeofday(&self->now);
|
|
|
|
diff = self->now.tv_usec - self->stamp.tv_usec;
|
|
/* self->stamp is set from ali_ircc_dma_receive_complete() */
|
|
|
|
IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __FUNCTION__ , diff);
|
|
|
|
if (diff < 0)
|
|
diff += 1000000;
|
|
|
|
/* Check if the mtt is larger than the time we have
|
|
* already used by all the protocol processing
|
|
*/
|
|
if (mtt > diff)
|
|
{
|
|
mtt -= diff;
|
|
|
|
/*
|
|
* Use timer if delay larger than 1000 us, and
|
|
* use udelay for smaller values which should
|
|
* be acceptable
|
|
*/
|
|
if (mtt > 500)
|
|
{
|
|
/* Adjust for timer resolution */
|
|
mtt = (mtt+250) / 500; /* 4 discard, 5 get advanced, Let's round off */
|
|
|
|
IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __FUNCTION__ , mtt);
|
|
|
|
/* Setup timer */
|
|
if (mtt == 1) /* 500 us */
|
|
{
|
|
switch_bank(iobase, BANK1);
|
|
outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR);
|
|
}
|
|
else if (mtt == 2) /* 1 ms */
|
|
{
|
|
switch_bank(iobase, BANK1);
|
|
outb(TIMER_IIR_1ms, iobase+FIR_TIMER_IIR);
|
|
}
|
|
else /* > 2ms -> 4ms */
|
|
{
|
|
switch_bank(iobase, BANK1);
|
|
outb(TIMER_IIR_2ms, iobase+FIR_TIMER_IIR);
|
|
}
|
|
|
|
|
|
/* Start timer */
|
|
outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR);
|
|
self->io.direction = IO_XMIT;
|
|
|
|
/* Enable timer interrupt */
|
|
self->ier = IER_TIMER;
|
|
SetCOMInterrupts(self, TRUE);
|
|
|
|
/* Timer will take care of the rest */
|
|
goto out;
|
|
}
|
|
else
|
|
udelay(mtt);
|
|
} // if (if (mtt > diff)
|
|
}// if (mtt)
|
|
|
|
/* Enable EOM interrupt */
|
|
self->ier = IER_EOM;
|
|
SetCOMInterrupts(self, TRUE);
|
|
|
|
/* Transmit frame */
|
|
ali_ircc_dma_xmit(self);
|
|
} // if (self->tx_fifo.len == 1)
|
|
|
|
out:
|
|
|
|
/* Not busy transmitting anymore if window is not full */
|
|
if (self->tx_fifo.free < MAX_TX_WINDOW)
|
|
netif_wake_queue(self->netdev);
|
|
|
|
/* Restore bank register */
|
|
switch_bank(iobase, BANK0);
|
|
|
|
dev->trans_start = jiffies;
|
|
spin_unlock_irqrestore(&self->lock, flags);
|
|
dev_kfree_skb(skb);
|
|
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
|
|
{
|
|
int iobase, tmp;
|
|
unsigned char FIFO_OPTI, Hi, Lo;
|
|
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
|
|
|
|
iobase = self->io.fir_base;
|
|
|
|
/* FIFO threshold , this method comes from NDIS5 code */
|
|
|
|
if(self->tx_fifo.queue[self->tx_fifo.ptr].len < TX_FIFO_Threshold)
|
|
FIFO_OPTI = self->tx_fifo.queue[self->tx_fifo.ptr].len-1;
|
|
else
|
|
FIFO_OPTI = TX_FIFO_Threshold;
|
|
|
|
/* Disable DMA */
|
|
switch_bank(iobase, BANK1);
|
|
outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
|
|
|
|
self->io.direction = IO_XMIT;
|
|
|
|
irda_setup_dma(self->io.dma,
|
|
((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
|
|
self->tx_buff.head) + self->tx_buff_dma,
|
|
self->tx_fifo.queue[self->tx_fifo.ptr].len,
|
|
DMA_TX_MODE);
|
|
|
|
/* Reset Tx FIFO */
|
|
switch_bank(iobase, BANK0);
|
|
outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
|
|
|
|
/* Set Tx FIFO threshold */
|
|
if (self->fifo_opti_buf!=FIFO_OPTI)
|
|
{
|
|
switch_bank(iobase, BANK1);
|
|
outb(FIFO_OPTI, iobase+FIR_FIFO_TR) ;
|
|
self->fifo_opti_buf=FIFO_OPTI;
|
|
}
|
|
|
|
/* Set Tx DMA threshold */
|
|
switch_bank(iobase, BANK1);
|
|
outb(TX_DMA_Threshold, iobase+FIR_DMA_TR);
|
|
|
|
/* Set max Tx frame size */
|
|
Hi = (self->tx_fifo.queue[self->tx_fifo.ptr].len >> 8) & 0x0f;
|
|
Lo = self->tx_fifo.queue[self->tx_fifo.ptr].len & 0xff;
|
|
switch_bank(iobase, BANK2);
|
|
outb(Hi, iobase+FIR_TX_DSR_HI);
|
|
outb(Lo, iobase+FIR_TX_DSR_LO);
|
|
|
|
/* Disable SIP , Disable Brick Wall (we don't support in TX mode), Change to TX mode */
|
|
switch_bank(iobase, BANK0);
|
|
tmp = inb(iobase+FIR_LCR_B);
|
|
tmp &= ~0x20; // Disable SIP
|
|
outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B);
|
|
IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
|
|
|
|
outb(0, iobase+FIR_LSR);
|
|
|
|
/* Enable DMA and Burst Mode */
|
|
switch_bank(iobase, BANK1);
|
|
outb(inb(iobase+FIR_CR) | CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
|
|
|
|
switch_bank(iobase, BANK0);
|
|
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
|
|
{
|
|
int iobase;
|
|
int ret = TRUE;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
|
|
|
|
iobase = self->io.fir_base;
|
|
|
|
/* Disable DMA */
|
|
switch_bank(iobase, BANK1);
|
|
outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
|
|
|
|
/* Check for underrun! */
|
|
switch_bank(iobase, BANK0);
|
|
if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT)
|
|
|
|
{
|
|
IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __FUNCTION__);
|
|
self->stats.tx_errors++;
|
|
self->stats.tx_fifo_errors++;
|
|
}
|
|
else
|
|
{
|
|
self->stats.tx_packets++;
|
|
}
|
|
|
|
/* Check if we need to change the speed */
|
|
if (self->new_speed)
|
|
{
|
|
ali_ircc_change_speed(self, self->new_speed);
|
|
self->new_speed = 0;
|
|
}
|
|
|
|
/* Finished with this frame, so prepare for next */
|
|
self->tx_fifo.ptr++;
|
|
self->tx_fifo.len--;
|
|
|
|
/* Any frames to be sent back-to-back? */
|
|
if (self->tx_fifo.len)
|
|
{
|
|
ali_ircc_dma_xmit(self);
|
|
|
|
/* Not finished yet! */
|
|
ret = FALSE;
|
|
}
|
|
else
|
|
{ /* Reset Tx FIFO info */
|
|
self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
|
|
self->tx_fifo.tail = self->tx_buff.head;
|
|
}
|
|
|
|
/* Make sure we have room for more frames */
|
|
if (self->tx_fifo.free < MAX_TX_WINDOW) {
|
|
/* Not busy transmitting anymore */
|
|
/* Tell the network layer, that we can accept more frames */
|
|
netif_wake_queue(self->netdev);
|
|
}
|
|
|
|
switch_bank(iobase, BANK0);
|
|
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_dma_receive (self)
|
|
*
|
|
* Get ready for receiving a frame. The device will initiate a DMA
|
|
* if it starts to receive a frame.
|
|
*
|
|
*/
|
|
static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
|
|
{
|
|
int iobase, tmp;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
|
|
|
|
iobase = self->io.fir_base;
|
|
|
|
/* Reset Tx FIFO info */
|
|
self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
|
|
self->tx_fifo.tail = self->tx_buff.head;
|
|
|
|
/* Disable DMA */
|
|
switch_bank(iobase, BANK1);
|
|
outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
|
|
|
|
/* Reset Message Count */
|
|
switch_bank(iobase, BANK0);
|
|
outb(0x07, iobase+FIR_LSR);
|
|
|
|
self->rcvFramesOverflow = FALSE;
|
|
|
|
self->LineStatus = inb(iobase+FIR_LSR) ;
|
|
|
|
/* Reset Rx FIFO info */
|
|
self->io.direction = IO_RECV;
|
|
self->rx_buff.data = self->rx_buff.head;
|
|
|
|
/* Reset Rx FIFO */
|
|
// switch_bank(iobase, BANK0);
|
|
outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
|
|
|
|
self->st_fifo.len = self->st_fifo.pending_bytes = 0;
|
|
self->st_fifo.tail = self->st_fifo.head = 0;
|
|
|
|
irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
|
|
DMA_RX_MODE);
|
|
|
|
/* Set Receive Mode,Brick Wall */
|
|
//switch_bank(iobase, BANK0);
|
|
tmp = inb(iobase+FIR_LCR_B);
|
|
outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM
|
|
IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __FUNCTION__ , inb(iobase+FIR_LCR_B));
|
|
|
|
/* Set Rx Threshold */
|
|
switch_bank(iobase, BANK1);
|
|
outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
|
|
outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
|
|
|
|
/* Enable DMA and Burst Mode */
|
|
// switch_bank(iobase, BANK1);
|
|
outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
|
|
|
|
switch_bank(iobase, BANK0);
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
return 0;
|
|
}
|
|
|
|
static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
|
|
{
|
|
struct st_fifo *st_fifo;
|
|
struct sk_buff *skb;
|
|
__u8 status, MessageCount;
|
|
int len, i, iobase, val;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
|
|
|
|
st_fifo = &self->st_fifo;
|
|
iobase = self->io.fir_base;
|
|
|
|
switch_bank(iobase, BANK0);
|
|
MessageCount = inb(iobase+ FIR_LSR)&0x07;
|
|
|
|
if (MessageCount > 0)
|
|
IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __FUNCTION__ , MessageCount);
|
|
|
|
for (i=0; i<=MessageCount; i++)
|
|
{
|
|
/* Bank 0 */
|
|
switch_bank(iobase, BANK0);
|
|
status = inb(iobase+FIR_LSR);
|
|
|
|
switch_bank(iobase, BANK2);
|
|
len = inb(iobase+FIR_RX_DSR_HI) & 0x0f;
|
|
len = len << 8;
|
|
len |= inb(iobase+FIR_RX_DSR_LO);
|
|
|
|
IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __FUNCTION__ , len);
|
|
IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __FUNCTION__ , status);
|
|
|
|
if (st_fifo->tail >= MAX_RX_WINDOW) {
|
|
IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__ );
|
|
continue;
|
|
}
|
|
|
|
st_fifo->entries[st_fifo->tail].status = status;
|
|
st_fifo->entries[st_fifo->tail].len = len;
|
|
st_fifo->pending_bytes += len;
|
|
st_fifo->tail++;
|
|
st_fifo->len++;
|
|
}
|
|
|
|
for (i=0; i<=MessageCount; i++)
|
|
{
|
|
/* Get first entry */
|
|
status = st_fifo->entries[st_fifo->head].status;
|
|
len = st_fifo->entries[st_fifo->head].len;
|
|
st_fifo->pending_bytes -= len;
|
|
st_fifo->head++;
|
|
st_fifo->len--;
|
|
|
|
/* Check for errors */
|
|
if ((status & 0xd8) || self->rcvFramesOverflow || (len==0))
|
|
{
|
|
IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __FUNCTION__ );
|
|
|
|
/* Skip frame */
|
|
self->stats.rx_errors++;
|
|
|
|
self->rx_buff.data += len;
|
|
|
|
if (status & LSR_FIFO_UR)
|
|
{
|
|
self->stats.rx_frame_errors++;
|
|
IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __FUNCTION__ );
|
|
}
|
|
if (status & LSR_FRAME_ERROR)
|
|
{
|
|
self->stats.rx_frame_errors++;
|
|
IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __FUNCTION__ );
|
|
}
|
|
|
|
if (status & LSR_CRC_ERROR)
|
|
{
|
|
self->stats.rx_crc_errors++;
|
|
IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __FUNCTION__ );
|
|
}
|
|
|
|
if(self->rcvFramesOverflow)
|
|
{
|
|
self->stats.rx_frame_errors++;
|
|
IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __FUNCTION__ );
|
|
}
|
|
if(len == 0)
|
|
{
|
|
self->stats.rx_frame_errors++;
|
|
IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __FUNCTION__ );
|
|
}
|
|
}
|
|
else
|
|
{
|
|
|
|
if (st_fifo->pending_bytes < 32)
|
|
{
|
|
switch_bank(iobase, BANK0);
|
|
val = inb(iobase+FIR_BSR);
|
|
if ((val& BSR_FIFO_NOT_EMPTY)== 0x80)
|
|
{
|
|
IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __FUNCTION__ );
|
|
|
|
/* Put this entry back in fifo */
|
|
st_fifo->head--;
|
|
st_fifo->len++;
|
|
st_fifo->pending_bytes += len;
|
|
st_fifo->entries[st_fifo->head].status = status;
|
|
st_fifo->entries[st_fifo->head].len = len;
|
|
|
|
/*
|
|
* DMA not finished yet, so try again
|
|
* later, set timer value, resolution
|
|
* 500 us
|
|
*/
|
|
|
|
switch_bank(iobase, BANK1);
|
|
outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); // 2001/1/2 05:07PM
|
|
|
|
/* Enable Timer */
|
|
outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR);
|
|
|
|
return FALSE; /* I'll be back! */
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Remember the time we received this frame, so we can
|
|
* reduce the min turn time a bit since we will know
|
|
* how much time we have used for protocol processing
|
|
*/
|
|
do_gettimeofday(&self->stamp);
|
|
|
|
skb = dev_alloc_skb(len+1);
|
|
if (skb == NULL)
|
|
{
|
|
IRDA_WARNING("%s(), memory squeeze, "
|
|
"dropping frame.\n",
|
|
__FUNCTION__);
|
|
self->stats.rx_dropped++;
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
/* Make sure IP header gets aligned */
|
|
skb_reserve(skb, 1);
|
|
|
|
/* Copy frame without CRC, CRC is removed by hardware*/
|
|
skb_put(skb, len);
|
|
memcpy(skb->data, self->rx_buff.data, len);
|
|
|
|
/* Move to next frame */
|
|
self->rx_buff.data += len;
|
|
self->stats.rx_bytes += len;
|
|
self->stats.rx_packets++;
|
|
|
|
skb->dev = self->netdev;
|
|
skb->mac.raw = skb->data;
|
|
skb->protocol = htons(ETH_P_IRDA);
|
|
netif_rx(skb);
|
|
self->netdev->last_rx = jiffies;
|
|
}
|
|
}
|
|
|
|
switch_bank(iobase, BANK0);
|
|
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
return TRUE;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Function ali_ircc_sir_hard_xmit (skb, dev)
|
|
*
|
|
* Transmit the frame!
|
|
*
|
|
*/
|
|
static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct ali_ircc_cb *self;
|
|
unsigned long flags;
|
|
int iobase;
|
|
__u32 speed;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
IRDA_ASSERT(dev != NULL, return 0;);
|
|
|
|
self = (struct ali_ircc_cb *) dev->priv;
|
|
IRDA_ASSERT(self != NULL, return 0;);
|
|
|
|
iobase = self->io.sir_base;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* Make sure tests *& speed change are atomic */
|
|
spin_lock_irqsave(&self->lock, flags);
|
|
|
|
/* Note : you should make sure that speed changes are not going
|
|
* to corrupt any outgoing frame. Look at nsc-ircc for the gory
|
|
* details - Jean II */
|
|
|
|
/* Check if we need to change the speed */
|
|
speed = irda_get_next_speed(skb);
|
|
if ((speed != self->io.speed) && (speed != -1)) {
|
|
/* Check for empty frame */
|
|
if (!skb->len) {
|
|
ali_ircc_change_speed(self, speed);
|
|
dev->trans_start = jiffies;
|
|
spin_unlock_irqrestore(&self->lock, flags);
|
|
dev_kfree_skb(skb);
|
|
return 0;
|
|
} else
|
|
self->new_speed = speed;
|
|
}
|
|
|
|
/* Init tx buffer */
|
|
self->tx_buff.data = self->tx_buff.head;
|
|
|
|
/* Copy skb to tx_buff while wrapping, stuffing and making CRC */
|
|
self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
|
|
self->tx_buff.truesize);
|
|
|
|
self->stats.tx_bytes += self->tx_buff.len;
|
|
|
|
/* Turn on transmit finished interrupt. Will fire immediately! */
|
|
outb(UART_IER_THRI, iobase+UART_IER);
|
|
|
|
dev->trans_start = jiffies;
|
|
spin_unlock_irqrestore(&self->lock, flags);
|
|
|
|
dev_kfree_skb(skb);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Function ali_ircc_net_ioctl (dev, rq, cmd)
|
|
*
|
|
* Process IOCTL commands for this device
|
|
*
|
|
*/
|
|
static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct if_irda_req *irq = (struct if_irda_req *) rq;
|
|
struct ali_ircc_cb *self;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
IRDA_ASSERT(dev != NULL, return -1;);
|
|
|
|
self = dev->priv;
|
|
|
|
IRDA_ASSERT(self != NULL, return -1;);
|
|
|
|
IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd);
|
|
|
|
switch (cmd) {
|
|
case SIOCSBANDWIDTH: /* Set bandwidth */
|
|
IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __FUNCTION__ );
|
|
/*
|
|
* This function will also be used by IrLAP to change the
|
|
* speed, so we still must allow for speed change within
|
|
* interrupt context.
|
|
*/
|
|
if (!in_interrupt() && !capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
|
|
spin_lock_irqsave(&self->lock, flags);
|
|
ali_ircc_change_speed(self, irq->ifr_baudrate);
|
|
spin_unlock_irqrestore(&self->lock, flags);
|
|
break;
|
|
case SIOCSMEDIABUSY: /* Set media busy */
|
|
IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __FUNCTION__ );
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
irda_device_set_media_busy(self->netdev, TRUE);
|
|
break;
|
|
case SIOCGRECEIVING: /* Check if we are receiving right now */
|
|
IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __FUNCTION__ );
|
|
/* This is protected */
|
|
irq->ifr_receiving = ali_ircc_is_receiving(self);
|
|
break;
|
|
default:
|
|
ret = -EOPNOTSUPP;
|
|
}
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Function ali_ircc_is_receiving (self)
|
|
*
|
|
* Return TRUE is we are currently receiving a frame
|
|
*
|
|
*/
|
|
static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
|
|
{
|
|
unsigned long flags;
|
|
int status = FALSE;
|
|
int iobase;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __FUNCTION__ );
|
|
|
|
IRDA_ASSERT(self != NULL, return FALSE;);
|
|
|
|
spin_lock_irqsave(&self->lock, flags);
|
|
|
|
if (self->io.speed > 115200)
|
|
{
|
|
iobase = self->io.fir_base;
|
|
|
|
switch_bank(iobase, BANK1);
|
|
if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0)
|
|
{
|
|
/* We are receiving something */
|
|
IRDA_DEBUG(1, "%s(), We are receiving something\n", __FUNCTION__ );
|
|
status = TRUE;
|
|
}
|
|
switch_bank(iobase, BANK0);
|
|
}
|
|
else
|
|
{
|
|
status = (self->rx_buff.state != OUTSIDE_FRAME);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&self->lock, flags);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
|
|
return status;
|
|
}
|
|
|
|
static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev)
|
|
{
|
|
struct ali_ircc_cb *self = (struct ali_ircc_cb *) dev->priv;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
|
|
return &self->stats;
|
|
}
|
|
|
|
static void ali_ircc_suspend(struct ali_ircc_cb *self)
|
|
{
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
IRDA_MESSAGE("%s, Suspending\n", driver_name);
|
|
|
|
if (self->io.suspended)
|
|
return;
|
|
|
|
ali_ircc_net_close(self->netdev);
|
|
|
|
self->io.suspended = 1;
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
static void ali_ircc_wakeup(struct ali_ircc_cb *self)
|
|
{
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
if (!self->io.suspended)
|
|
return;
|
|
|
|
ali_ircc_net_open(self->netdev);
|
|
|
|
IRDA_MESSAGE("%s, Waking up\n", driver_name);
|
|
|
|
self->io.suspended = 0;
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
static int ali_ircc_pmproc(struct pm_dev *dev, pm_request_t rqst, void *data)
|
|
{
|
|
struct ali_ircc_cb *self = (struct ali_ircc_cb*) dev->data;
|
|
|
|
IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
if (self) {
|
|
switch (rqst) {
|
|
case PM_SUSPEND:
|
|
ali_ircc_suspend(self);
|
|
break;
|
|
case PM_RESUME:
|
|
ali_ircc_wakeup(self);
|
|
break;
|
|
}
|
|
}
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* ALi Chip Function */
|
|
|
|
static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
|
|
{
|
|
|
|
unsigned char newMask;
|
|
|
|
int iobase = self->io.fir_base; /* or sir_base */
|
|
|
|
IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __FUNCTION__ , enable);
|
|
|
|
/* Enable the interrupt which we wish to */
|
|
if (enable){
|
|
if (self->io.direction == IO_XMIT)
|
|
{
|
|
if (self->io.speed > 115200) /* FIR, MIR */
|
|
{
|
|
newMask = self->ier;
|
|
}
|
|
else /* SIR */
|
|
{
|
|
newMask = UART_IER_THRI | UART_IER_RDI;
|
|
}
|
|
}
|
|
else {
|
|
if (self->io.speed > 115200) /* FIR, MIR */
|
|
{
|
|
newMask = self->ier;
|
|
}
|
|
else /* SIR */
|
|
{
|
|
newMask = UART_IER_RDI;
|
|
}
|
|
}
|
|
}
|
|
else /* Disable all the interrupts */
|
|
{
|
|
newMask = 0x00;
|
|
|
|
}
|
|
|
|
//SIR and FIR has different registers
|
|
if (self->io.speed > 115200)
|
|
{
|
|
switch_bank(iobase, BANK0);
|
|
outb(newMask, iobase+FIR_IER);
|
|
}
|
|
else
|
|
outb(newMask, iobase+UART_IER);
|
|
|
|
IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
static void SIR2FIR(int iobase)
|
|
{
|
|
//unsigned char tmp;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
/* Already protected (change_speed() or setup()), no need to lock.
|
|
* Jean II */
|
|
|
|
outb(0x28, iobase+UART_MCR);
|
|
outb(0x68, iobase+UART_MCR);
|
|
outb(0x88, iobase+UART_MCR);
|
|
|
|
outb(0x60, iobase+FIR_MCR); /* Master Reset */
|
|
outb(0x20, iobase+FIR_MCR); /* Master Interrupt Enable */
|
|
|
|
//tmp = inb(iobase+FIR_LCR_B); /* SIP enable */
|
|
//tmp |= 0x20;
|
|
//outb(tmp, iobase+FIR_LCR_B);
|
|
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
static void FIR2SIR(int iobase)
|
|
{
|
|
unsigned char val;
|
|
|
|
IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ );
|
|
|
|
/* Already protected (change_speed() or setup()), no need to lock.
|
|
* Jean II */
|
|
|
|
outb(0x20, iobase+FIR_MCR); /* IRQ to low */
|
|
outb(0x00, iobase+UART_IER);
|
|
|
|
outb(0xA0, iobase+FIR_MCR); /* Don't set master reset */
|
|
outb(0x00, iobase+UART_FCR);
|
|
outb(0x07, iobase+UART_FCR);
|
|
|
|
val = inb(iobase+UART_RX);
|
|
val = inb(iobase+UART_LSR);
|
|
val = inb(iobase+UART_MSR);
|
|
|
|
IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ );
|
|
}
|
|
|
|
MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
|
|
MODULE_DESCRIPTION("ALi FIR Controller Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
module_param_array(io, int, NULL, 0);
|
|
MODULE_PARM_DESC(io, "Base I/O addresses");
|
|
module_param_array(irq, int, NULL, 0);
|
|
MODULE_PARM_DESC(irq, "IRQ lines");
|
|
module_param_array(dma, int, NULL, 0);
|
|
MODULE_PARM_DESC(dma, "DMA channels");
|
|
|
|
module_init(ali_ircc_init);
|
|
module_exit(ali_ircc_cleanup);
|