openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/phy
History
Zhangfei Gao 6e14a5eeb1 net: phy: resume phydev when going to RESUMING 
With commit be9dad1f9f ("net: phy: suspend phydev when going
to HALTED"), an unused PHY device will be put in a low-power mode
using BMCR_PDOWN. Some Ethernet drivers might be calling phy_start()
and phy_stop() from ndo_open and ndo_close() respectively, while
calling phy_connect() and phy_disconnect() from probe and remove.
In such a case, the PHY will be powered down during the phy_stop()
call, but will fail to be powered up in phy_start().
This patch fixes this scenario.

Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
 		2014-05-16 15:17:58 -04:00
..
Kconfig net: phy: add Broadcom BCM7xxx internal PHY driver 2014-02-14 00:27:58 -05:00
Makefile net: phy: add Broadcom BCM7xxx internal PHY driver 2014-02-14 00:27:58 -05:00
amd.c phylib: Support registering a bunch of drivers 2012-07-09 00:10:56 -07:00
at803x.c phy/at8031: enable at8031 to work on interrupt mode 2014-03-29 18:20:30 -04:00
bcm7xxx.c net: phy: bcm7xxx: properly clear AFE_RX_LP_COUNTER 2014-03-26 16:19:24 -04:00
bcm63xx.c phy: bcm63xx: report Broadcom BCM63xx PHYs as internal 2013-05-27 22:42:50 -07:00
bcm87xx.c net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver 2012-09-22 15:33:46 -04:00
broadcom.c net: phy: broadcom: extract register definitions 2014-02-14 00:27:58 -05:00
cicada.c net: phy: cicada: fix checkpath errors 2013-12-18 00:49:01 -05:00
davicom.c net: phy: davicom: fix checkpath errors 2013-12-18 00:49:01 -05:00
dp83640.c net: ptp: move PTP classifier in its own file 2014-04-01 16:43:18 -04:00
dp83640_reg.h ptp: Added a clock driver for the National Semiconductor PHYTER. 2011-05-23 13:10:23 -07:00
et1011c.c
…
fixed.c phy: Use pr_<level> 2012-06-11 16:58:24 -07:00
icplus.c net: phy: icplus: fix checkpath error 2013-12-18 00:49:02 -05:00
lxt.c net: phy: lxt: fix checkpath errors 2013-12-18 00:49:02 -05:00
marvell.c net: phy: marvell: provide genphy suspend/resume 2013-12-17 14:42:44 -05:00
mdio-bitbang.c Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free" 2012-11-14 22:32:15 -05:00
mdio-gpio.c net: mdio-gpio: warn about missing bus alias id 2014-05-09 15:51:19 -04:00
mdio-moxart.c drivers/net: delete non-required instances of include <linux/init.h> 2014-01-16 11:53:26 -08:00
mdio-mux-gpio.c drivers/net: delete non-required instances of include <linux/init.h> 2014-01-16 11:53:26 -08:00
mdio-mux-mmioreg.c drivers/net: delete non-required instances of include <linux/init.h> 2014-01-16 11:53:26 -08:00
mdio-mux.c netdev/phy: skip disabled mdio-mux nodes 2012-08-20 02:16:00 -07:00
mdio-octeon.c drivers/net: delete non-required instances of include <linux/init.h> 2014-01-16 11:53:26 -08:00
mdio-sun4i.c net: sun4i: remove empty MDIO bus reset function 2014-03-28 01:38:02 -04:00
mdio_bus.c net: phy: expose phydev->has_fixups to sysfs 2014-02-12 19:08:49 -05:00
micrel.c net/phy: micrel: fix bugged test on device tree loading for ksz9021 2014-04-23 14:58:58 -04:00
national.c phy: Use pr_<level> 2012-06-11 16:58:24 -07:00
phy.c net: phy: resume phydev when going to RESUMING 2014-05-16 15:17:58 -04:00
phy_device.c net: phy: Don't call phy_resume if phy_init_hw failed 2014-05-15 22:56:43 -04:00
qsemi.c
…
realtek.c PHY: Add RTL8201CP phy_driver to realtek 2013-11-11 14:05:03 -05:00
smsc.c net: phy: smsc: Fix config_init typo 2012-12-07 14:26:15 -05:00
spi_ks8995.c net: Micrel KSZ8864RMN 4-port managed switch support 2014-04-03 16:15:29 -04:00
ste10Xp.c phylib: Support registering a bunch of drivers 2012-07-09 00:10:56 -07:00
vitesse.c phy: Add Vitesse 8514 phy ID 2013-11-28 18:30:54 -05:00