mirror of https://gitee.com/openkylin/linux.git
71 lines
2.3 KiB
Plaintext
71 lines
2.3 KiB
Plaintext
* Rockchip PX30 Clock and Reset Unit
|
|
|
|
The PX30 clock controller generates and supplies clock to various
|
|
controllers within the SoC and also implements a reset controller for SoC
|
|
peripherals.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
|
|
- compatible: CRU should be "rockchip,px30-cru"
|
|
- reg: physical base address of the controller and length of memory mapped
|
|
region.
|
|
- clocks: A list of phandle + clock-specifier pairs for the clocks listed
|
|
in clock-names
|
|
- clock-names: Should contain the following:
|
|
- "xin24m" for both PMUCRU and CRU
|
|
- "gpll" for CRU (sourced from PMUCRU)
|
|
- #clock-cells: should be 1.
|
|
- #reset-cells: should be 1.
|
|
|
|
Optional Properties:
|
|
|
|
- rockchip,grf: phandle to the syscon managing the "general register files"
|
|
If missing, pll rates are not changeable, due to the missing pll lock status.
|
|
|
|
Each clock is assigned an identifier and client nodes can use this identifier
|
|
to specify the clock which they consume. All available clocks are defined as
|
|
preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
|
|
used in device tree sources. Similar macros exist for the reset sources in
|
|
these files.
|
|
|
|
External clocks:
|
|
|
|
There are several clocks that are generated outside the SoC. It is expected
|
|
that they are defined using standard clock bindings with following
|
|
clock-output-names:
|
|
- "xin24m" - crystal input - required,
|
|
- "xin32k" - rtc clock - optional,
|
|
- "i2sx_clkin" - external I2S clock - optional,
|
|
- "gmac_clkin" - external GMAC clock - optional
|
|
|
|
Example: Clock controller node:
|
|
|
|
pmucru: clock-controller@ff2bc000 {
|
|
compatible = "rockchip,px30-pmucru";
|
|
reg = <0x0 0xff2bc000 0x0 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
cru: clock-controller@ff2b0000 {
|
|
compatible = "rockchip,px30-cru";
|
|
reg = <0x0 0xff2b0000 0x0 0x1000>;
|
|
rockchip,grf = <&grf>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
Example: UART controller node that consumes the clock generated by the clock
|
|
controller:
|
|
|
|
uart0: serial@ff030000 {
|
|
compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
|
|
reg = <0x0 0xff030000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
};
|