mirror of https://gitee.com/openkylin/linux.git
65 lines
2.3 KiB
Plaintext
65 lines
2.3 KiB
Plaintext
* QCOM IOMMU
|
|
|
|
The MSM IOMMU is an implementation compatible with the ARM VMSA short
|
|
descriptor page tables. It provides address translation for bus masters outside
|
|
of the CPU, each connected to the IOMMU through a port called micro-TLB.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: Must contain "qcom,apq8064-iommu".
|
|
- reg: Base address and size of the IOMMU registers.
|
|
- interrupts: Specifiers for the MMU fault interrupts. For instances that
|
|
support secure mode two interrupts must be specified, for non-secure and
|
|
secure mode, in that order. For instances that don't support secure mode a
|
|
single interrupt must be specified.
|
|
- #iommu-cells: The number of cells needed to specify the stream id. This
|
|
is always 1.
|
|
- qcom,ncb: The total number of context banks in the IOMMU.
|
|
- clocks : List of clocks to be used during SMMU register access. See
|
|
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
for information about the format. For each clock specified
|
|
here, there must be a corresponding entry in clock-names
|
|
(see below).
|
|
|
|
- clock-names : List of clock names corresponding to the clocks specified in
|
|
the "clocks" property (above).
|
|
Should be "smmu_pclk" for specifying the interface clock
|
|
required for iommu's register accesses.
|
|
Should be "smmu_clk" for specifying the functional clock
|
|
required by iommu for bus accesses.
|
|
|
|
Each bus master connected to an IOMMU must reference the IOMMU in its device
|
|
node with the following property:
|
|
|
|
- iommus: A reference to the IOMMU in multiple cells. The first cell is a
|
|
phandle to the IOMMU and the second cell is the stream id.
|
|
A single master device can be connected to more than one iommu
|
|
and multiple contexts in each of the iommu. So multiple entries
|
|
are required to list all the iommus and the stream ids that the
|
|
master is connected to.
|
|
|
|
Example: mdp iommu and its bus master
|
|
|
|
mdp_port0: iommu@7500000 {
|
|
compatible = "qcom,apq8064-iommu";
|
|
#iommu-cells = <1>;
|
|
clock-names =
|
|
"smmu_pclk",
|
|
"smmu_clk";
|
|
clocks =
|
|
<&mmcc SMMU_AHB_CLK>,
|
|
<&mmcc MDP_AXI_CLK>;
|
|
reg = <0x07500000 0x100000>;
|
|
interrupts =
|
|
<GIC_SPI 63 0>,
|
|
<GIC_SPI 64 0>;
|
|
qcom,ncb = <2>;
|
|
};
|
|
|
|
mdp: qcom,mdp@5100000 {
|
|
compatible = "qcom,mdp";
|
|
...
|
|
iommus = <&mdp_port0 0
|
|
&mdp_port0 2>;
|
|
};
|