mirror of https://gitee.com/openkylin/linux.git
38 lines
1.1 KiB
Plaintext
38 lines
1.1 KiB
Plaintext
NVIDIA Tegra20/Tegra30 SLINK controller.
|
|
|
|
Required properties:
|
|
- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink".
|
|
- reg: Should contain SLINK registers location and length.
|
|
- interrupts: Should contain SLINK interrupts.
|
|
- clocks : Must contain one entry, for the module clock.
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- resets : Must contain an entry for each entry in reset-names.
|
|
See ../reset/reset.txt for details.
|
|
- reset-names : Must include the following entries:
|
|
- spi
|
|
- dmas : Must contain an entry for each entry in clock-names.
|
|
See ../dma/dma.txt for details.
|
|
- dma-names : Must include the following entries:
|
|
- rx
|
|
- tx
|
|
|
|
Recommended properties:
|
|
- spi-max-frequency: Definition as per
|
|
Documentation/devicetree/bindings/spi/spi-bus.txt
|
|
|
|
Example:
|
|
|
|
spi@7000d600 {
|
|
compatible = "nvidia,tegra20-slink";
|
|
reg = <0x7000d600 0x200>;
|
|
interrupts = <0 82 0x04>;
|
|
spi-max-frequency = <25000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car 44>;
|
|
resets = <&tegra_car 44>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 16>, <&apbdma 16>;
|
|
dma-names = "rx", "tx";
|
|
};
|