mirror of https://gitee.com/openkylin/linux.git
95 lines
3.5 KiB
C
95 lines
3.5 KiB
C
/****************************************************************************/
|
|
|
|
/*
|
|
* m52xxacr.h -- ColdFire version 2 core cache support
|
|
*
|
|
* (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
|
|
*/
|
|
|
|
/****************************************************************************/
|
|
#ifndef m52xxacr_h
|
|
#define m52xxacr_h
|
|
/****************************************************************************/
|
|
|
|
/*
|
|
* All varients of the ColdFire using version 2 cores have a similar
|
|
* cache setup. Although not absolutely identical the cache register
|
|
* definitions are compatible for all of them. Mostly they support a
|
|
* configurable cache memory that can be instruction only, data only,
|
|
* or split instruction and data. The exception is the very old version 2
|
|
* core based parts, like the 5206(e), 5249 and 5272, which are instruction
|
|
* cache only. Cache size varies from 2k up to 16k.
|
|
*/
|
|
|
|
/*
|
|
* Define the Cache Control register flags.
|
|
*/
|
|
#define CACR_CENB 0x80000000 /* Enable cache */
|
|
#define CACR_CDPI 0x10000000 /* Disable invalidation by CPUSHL */
|
|
#define CACR_CFRZ 0x08000000 /* Cache freeze mode */
|
|
#define CACR_CINV 0x01000000 /* Invalidate cache */
|
|
#define CACR_DISI 0x00800000 /* Disable instruction cache */
|
|
#define CACR_DISD 0x00400000 /* Disable data cache */
|
|
#define CACR_INVI 0x00200000 /* Invalidate instruction cache */
|
|
#define CACR_INVD 0x00100000 /* Invalidate data cache */
|
|
#define CACR_CEIB 0x00000400 /* Non-cachable instruction burst */
|
|
#define CACR_DCM 0x00000200 /* Default cache mode */
|
|
#define CACR_DBWE 0x00000100 /* Buffered write enable */
|
|
#define CACR_DWP 0x00000020 /* Write protection */
|
|
#define CACR_EUSP 0x00000010 /* Enable separate user a7 */
|
|
|
|
/*
|
|
* Define the Access Control register flags.
|
|
*/
|
|
#define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */
|
|
#define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */
|
|
#define ACR_ENABLE 0x00008000 /* Enable this ACR */
|
|
#define ACR_USER 0x00000000 /* Allow only user accesses */
|
|
#define ACR_SUPER 0x00002000 /* Allow supervisor access only */
|
|
#define ACR_ANY 0x00004000 /* Allow any access type */
|
|
#define ACR_CENB 0x00000000 /* Caching of region enabled */
|
|
#define ACR_CDIS 0x00000040 /* Caching of region disabled */
|
|
#define ACR_BWE 0x00000020 /* Write buffer enabled */
|
|
#define ACR_WPROTECT 0x00000004 /* Write protect region */
|
|
|
|
/*
|
|
* Set the cache controller settings we will use. On the cores that support
|
|
* a split cache configuration we allow all the combinations at Kconfig
|
|
* time. For those cores that only have an instruction cache we just set
|
|
* that as on.
|
|
*/
|
|
#if defined(CONFIG_CACHE_I)
|
|
#define CACHE_TYPE (CACR_DISD + CACR_EUSP)
|
|
#define CACHE_INVTYPEI 0
|
|
#elif defined(CONFIG_CACHE_D)
|
|
#define CACHE_TYPE (CACR_DISI + CACR_EUSP)
|
|
#define CACHE_INVTYPED 0
|
|
#elif defined(CONFIG_CACHE_BOTH)
|
|
#define CACHE_TYPE CACR_EUSP
|
|
#define CACHE_INVTYPEI CACR_INVI
|
|
#define CACHE_INVTYPED CACR_INVD
|
|
#else
|
|
/* This is the instruction cache only devices (no split cache, no eusp) */
|
|
#define CACHE_TYPE 0
|
|
#define CACHE_INVTYPEI 0
|
|
#endif
|
|
|
|
#define CACHE_INIT (CACR_CINV + CACHE_TYPE)
|
|
#define CACHE_MODE (CACR_CENB + CACHE_TYPE + CACR_DCM)
|
|
|
|
#define CACHE_INVALIDATE (CACHE_MODE + CACR_CINV)
|
|
#if defined(CACHE_INVTYPEI)
|
|
#define CACHE_INVALIDATEI (CACHE_MODE + CACR_CINV + CACHE_INVTYPEI)
|
|
#endif
|
|
#if defined(CACHE_INVTYPED)
|
|
#define CACHE_INVALIDATED (CACHE_MODE + CACR_CINV + CACHE_INVTYPED)
|
|
#endif
|
|
|
|
#define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \
|
|
(0x000f0000) + \
|
|
(ACR_ENABLE + ACR_ANY + ACR_CENB + ACR_BWE))
|
|
#define ACR1_MODE 0
|
|
|
|
/****************************************************************************/
|
|
#endif /* m52xxsim_h */
|