mirror of https://gitee.com/openkylin/linux.git
c046aa0f0f
My draft of SPC-4 says the following about the SCSI name string in
inquiry VPD page 83h:
The SCSI NAME STRING field starts with either:
a) the four UTF-8 characters 'eui.' concatenated with 16, 24, or
32 hexadecimal digits (i.e., the UTF-8 characters 0 through 9
and A through F) for an EUI-64 based identifier (see
7.8.6.5). The first hexadecimal digit shall be the most
significant four bits of the first byte (i.e., most significant
byte) of the EUI-64 based identifier;
b) the four UTF-8 characters 'naa.' concatenated with 16 or 32
hexadecimal digits for an NAA identifier (see 7.8.6.6). The
first hexadecimal digit shall be the most significant four bits
of the first byte (i.e., most significant byte) of the NAA
identifier; or
c) the four UTF-8 characters 'iqn.' concatenated with an iSCSI
Name for an iSCSI-name based identifier (see iSCSI).
However, the .tpg_get_wwn method for tcm_qla2xxx formats the WWN so
the SCSI name string looks like "52:4a:93:7d:24:5f:b2:12,t,0x0001".
This patch corrects the code so that VPD 83h gives a SPC-compliant
SCSI name string like "naa.524a937d245fb212,t,0x0001" while leavig
other uses alone (so configfs will still work with ':' separated WWNs).
Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Cc: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| qla_attr.c | ||
| qla_bsg.c | ||
| qla_bsg.h | ||
| qla_dbg.c | ||
| qla_dbg.h | ||
| qla_def.h | ||
| qla_devtbl.h | ||
| qla_dfs.c | ||
| qla_fw.h | ||
| qla_gbl.h | ||
| qla_gs.c | ||
| qla_init.c | ||
| qla_inline.h | ||
| qla_iocb.c | ||
| qla_isr.c | ||
| qla_mbx.c | ||
| qla_mid.c | ||
| qla_nx.c | ||
| qla_nx.h | ||
| qla_os.c | ||
| qla_settings.h | ||
| qla_sup.c | ||
| qla_target.c | ||
| qla_target.h | ||
| qla_version.h | ||
| tcm_qla2xxx.c | ||
| tcm_qla2xxx.h | ||