mirror of https://gitee.com/openkylin/linux.git
964 lines
28 KiB
C
964 lines
28 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Support for V3 Semiconductor PCI Local Bus to PCI Bridge
|
|
* Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
|
|
*
|
|
* Based on the code from arch/arm/mach-integrator/pci_v3.c
|
|
* Copyright (C) 1999 ARM Limited
|
|
* Copyright (C) 2000-2001 Deep Blue Solutions Ltd
|
|
*
|
|
* Contributors to the old driver include:
|
|
* Russell King <linux@armlinux.org.uk>
|
|
* David A. Rusling <david.rusling@linaro.org> (uHAL, ARM Firmware suite)
|
|
* Rob Herring <robh@kernel.org>
|
|
* Liviu Dudau <Liviu.Dudau@arm.com>
|
|
* Grant Likely <grant.likely@secretlab.ca>
|
|
* Arnd Bergmann <arnd@arndb.de>
|
|
* Bjorn Helgaas <bhelgaas@google.com>
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include "../pci.h"
|
|
|
|
#define V3_PCI_VENDOR 0x00000000
|
|
#define V3_PCI_DEVICE 0x00000002
|
|
#define V3_PCI_CMD 0x00000004
|
|
#define V3_PCI_STAT 0x00000006
|
|
#define V3_PCI_CC_REV 0x00000008
|
|
#define V3_PCI_HDR_CFG 0x0000000C
|
|
#define V3_PCI_IO_BASE 0x00000010
|
|
#define V3_PCI_BASE0 0x00000014
|
|
#define V3_PCI_BASE1 0x00000018
|
|
#define V3_PCI_SUB_VENDOR 0x0000002C
|
|
#define V3_PCI_SUB_ID 0x0000002E
|
|
#define V3_PCI_ROM 0x00000030
|
|
#define V3_PCI_BPARAM 0x0000003C
|
|
#define V3_PCI_MAP0 0x00000040
|
|
#define V3_PCI_MAP1 0x00000044
|
|
#define V3_PCI_INT_STAT 0x00000048
|
|
#define V3_PCI_INT_CFG 0x0000004C
|
|
#define V3_LB_BASE0 0x00000054
|
|
#define V3_LB_BASE1 0x00000058
|
|
#define V3_LB_MAP0 0x0000005E
|
|
#define V3_LB_MAP1 0x00000062
|
|
#define V3_LB_BASE2 0x00000064
|
|
#define V3_LB_MAP2 0x00000066
|
|
#define V3_LB_SIZE 0x00000068
|
|
#define V3_LB_IO_BASE 0x0000006E
|
|
#define V3_FIFO_CFG 0x00000070
|
|
#define V3_FIFO_PRIORITY 0x00000072
|
|
#define V3_FIFO_STAT 0x00000074
|
|
#define V3_LB_ISTAT 0x00000076
|
|
#define V3_LB_IMASK 0x00000077
|
|
#define V3_SYSTEM 0x00000078
|
|
#define V3_LB_CFG 0x0000007A
|
|
#define V3_PCI_CFG 0x0000007C
|
|
#define V3_DMA_PCI_ADR0 0x00000080
|
|
#define V3_DMA_PCI_ADR1 0x00000090
|
|
#define V3_DMA_LOCAL_ADR0 0x00000084
|
|
#define V3_DMA_LOCAL_ADR1 0x00000094
|
|
#define V3_DMA_LENGTH0 0x00000088
|
|
#define V3_DMA_LENGTH1 0x00000098
|
|
#define V3_DMA_CSR0 0x0000008B
|
|
#define V3_DMA_CSR1 0x0000009B
|
|
#define V3_DMA_CTLB_ADR0 0x0000008C
|
|
#define V3_DMA_CTLB_ADR1 0x0000009C
|
|
#define V3_DMA_DELAY 0x000000E0
|
|
#define V3_MAIL_DATA 0x000000C0
|
|
#define V3_PCI_MAIL_IEWR 0x000000D0
|
|
#define V3_PCI_MAIL_IERD 0x000000D2
|
|
#define V3_LB_MAIL_IEWR 0x000000D4
|
|
#define V3_LB_MAIL_IERD 0x000000D6
|
|
#define V3_MAIL_WR_STAT 0x000000D8
|
|
#define V3_MAIL_RD_STAT 0x000000DA
|
|
#define V3_QBA_MAP 0x000000DC
|
|
|
|
/* PCI STATUS bits */
|
|
#define V3_PCI_STAT_PAR_ERR BIT(15)
|
|
#define V3_PCI_STAT_SYS_ERR BIT(14)
|
|
#define V3_PCI_STAT_M_ABORT_ERR BIT(13)
|
|
#define V3_PCI_STAT_T_ABORT_ERR BIT(12)
|
|
|
|
/* LB ISTAT bits */
|
|
#define V3_LB_ISTAT_MAILBOX BIT(7)
|
|
#define V3_LB_ISTAT_PCI_RD BIT(6)
|
|
#define V3_LB_ISTAT_PCI_WR BIT(5)
|
|
#define V3_LB_ISTAT_PCI_INT BIT(4)
|
|
#define V3_LB_ISTAT_PCI_PERR BIT(3)
|
|
#define V3_LB_ISTAT_I2O_QWR BIT(2)
|
|
#define V3_LB_ISTAT_DMA1 BIT(1)
|
|
#define V3_LB_ISTAT_DMA0 BIT(0)
|
|
|
|
/* PCI COMMAND bits */
|
|
#define V3_COMMAND_M_FBB_EN BIT(9)
|
|
#define V3_COMMAND_M_SERR_EN BIT(8)
|
|
#define V3_COMMAND_M_PAR_EN BIT(6)
|
|
#define V3_COMMAND_M_MASTER_EN BIT(2)
|
|
#define V3_COMMAND_M_MEM_EN BIT(1)
|
|
#define V3_COMMAND_M_IO_EN BIT(0)
|
|
|
|
/* SYSTEM bits */
|
|
#define V3_SYSTEM_M_RST_OUT BIT(15)
|
|
#define V3_SYSTEM_M_LOCK BIT(14)
|
|
#define V3_SYSTEM_UNLOCK 0xa05f
|
|
|
|
/* PCI CFG bits */
|
|
#define V3_PCI_CFG_M_I2O_EN BIT(15)
|
|
#define V3_PCI_CFG_M_IO_REG_DIS BIT(14)
|
|
#define V3_PCI_CFG_M_IO_DIS BIT(13)
|
|
#define V3_PCI_CFG_M_EN3V BIT(12)
|
|
#define V3_PCI_CFG_M_RETRY_EN BIT(10)
|
|
#define V3_PCI_CFG_M_AD_LOW1 BIT(9)
|
|
#define V3_PCI_CFG_M_AD_LOW0 BIT(8)
|
|
/*
|
|
* This is the value applied to C/BE[3:1], with bit 0 always held 0
|
|
* during DMA access.
|
|
*/
|
|
#define V3_PCI_CFG_M_RTYPE_SHIFT 5
|
|
#define V3_PCI_CFG_M_WTYPE_SHIFT 1
|
|
#define V3_PCI_CFG_TYPE_DEFAULT 0x3
|
|
|
|
/* PCI BASE bits (PCI -> Local Bus) */
|
|
#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000U
|
|
#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00U
|
|
#define V3_PCI_BASE_M_PREFETCH BIT(3)
|
|
#define V3_PCI_BASE_M_TYPE (3 << 1)
|
|
#define V3_PCI_BASE_M_IO BIT(0)
|
|
|
|
/* PCI MAP bits (PCI -> Local bus) */
|
|
#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000U
|
|
#define V3_PCI_MAP_M_RD_POST_INH BIT(15)
|
|
#define V3_PCI_MAP_M_ROM_SIZE (3 << 10)
|
|
#define V3_PCI_MAP_M_SWAP (3 << 8)
|
|
#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0U
|
|
#define V3_PCI_MAP_M_REG_EN BIT(1)
|
|
#define V3_PCI_MAP_M_ENABLE BIT(0)
|
|
|
|
/* LB_BASE0,1 bits (Local bus -> PCI) */
|
|
#define V3_LB_BASE_ADR_BASE 0xfff00000U
|
|
#define V3_LB_BASE_SWAP (3 << 8)
|
|
#define V3_LB_BASE_ADR_SIZE (15 << 4)
|
|
#define V3_LB_BASE_PREFETCH BIT(3)
|
|
#define V3_LB_BASE_ENABLE BIT(0)
|
|
|
|
#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4)
|
|
#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4)
|
|
|
|
#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE)
|
|
|
|
/* LB_MAP0,1 bits (Local bus -> PCI) */
|
|
#define V3_LB_MAP_MAP_ADR 0xfff0U
|
|
#define V3_LB_MAP_TYPE (7 << 1)
|
|
#define V3_LB_MAP_AD_LOW_EN BIT(0)
|
|
|
|
#define V3_LB_MAP_TYPE_IACK (0 << 1)
|
|
#define V3_LB_MAP_TYPE_IO (1 << 1)
|
|
#define V3_LB_MAP_TYPE_MEM (3 << 1)
|
|
#define V3_LB_MAP_TYPE_CONFIG (5 << 1)
|
|
#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1)
|
|
|
|
#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR)
|
|
|
|
/* LB_BASE2 bits (Local bus -> PCI IO) */
|
|
#define V3_LB_BASE2_ADR_BASE 0xff00U
|
|
#define V3_LB_BASE2_SWAP_AUTO (3 << 6)
|
|
#define V3_LB_BASE2_ENABLE BIT(0)
|
|
|
|
#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE)
|
|
|
|
/* LB_MAP2 bits (Local bus -> PCI IO) */
|
|
#define V3_LB_MAP2_MAP_ADR 0xff00U
|
|
|
|
#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR)
|
|
|
|
/* FIFO priority bits */
|
|
#define V3_FIFO_PRIO_LOCAL BIT(12)
|
|
#define V3_FIFO_PRIO_LB_RD1_FLUSH_EOB BIT(10)
|
|
#define V3_FIFO_PRIO_LB_RD1_FLUSH_AP1 BIT(11)
|
|
#define V3_FIFO_PRIO_LB_RD1_FLUSH_ANY (BIT(10)|BIT(11))
|
|
#define V3_FIFO_PRIO_LB_RD0_FLUSH_EOB BIT(8)
|
|
#define V3_FIFO_PRIO_LB_RD0_FLUSH_AP1 BIT(9)
|
|
#define V3_FIFO_PRIO_LB_RD0_FLUSH_ANY (BIT(8)|BIT(9))
|
|
#define V3_FIFO_PRIO_PCI BIT(4)
|
|
#define V3_FIFO_PRIO_PCI_RD1_FLUSH_EOB BIT(2)
|
|
#define V3_FIFO_PRIO_PCI_RD1_FLUSH_AP1 BIT(3)
|
|
#define V3_FIFO_PRIO_PCI_RD1_FLUSH_ANY (BIT(2)|BIT(3))
|
|
#define V3_FIFO_PRIO_PCI_RD0_FLUSH_EOB BIT(0)
|
|
#define V3_FIFO_PRIO_PCI_RD0_FLUSH_AP1 BIT(1)
|
|
#define V3_FIFO_PRIO_PCI_RD0_FLUSH_ANY (BIT(0)|BIT(1))
|
|
|
|
/* Local bus configuration bits */
|
|
#define V3_LB_CFG_LB_TO_64_CYCLES 0x0000
|
|
#define V3_LB_CFG_LB_TO_256_CYCLES BIT(13)
|
|
#define V3_LB_CFG_LB_TO_512_CYCLES BIT(14)
|
|
#define V3_LB_CFG_LB_TO_1024_CYCLES (BIT(13)|BIT(14))
|
|
#define V3_LB_CFG_LB_RST BIT(12)
|
|
#define V3_LB_CFG_LB_PPC_RDY BIT(11)
|
|
#define V3_LB_CFG_LB_LB_INT BIT(10)
|
|
#define V3_LB_CFG_LB_ERR_EN BIT(9)
|
|
#define V3_LB_CFG_LB_RDY_EN BIT(8)
|
|
#define V3_LB_CFG_LB_BE_IMODE BIT(7)
|
|
#define V3_LB_CFG_LB_BE_OMODE BIT(6)
|
|
#define V3_LB_CFG_LB_ENDIAN BIT(5)
|
|
#define V3_LB_CFG_LB_PARK_EN BIT(4)
|
|
#define V3_LB_CFG_LB_FBB_DIS BIT(2)
|
|
|
|
/* ARM Integrator-specific extended control registers */
|
|
#define INTEGRATOR_SC_PCI_OFFSET 0x18
|
|
#define INTEGRATOR_SC_PCI_ENABLE BIT(0)
|
|
#define INTEGRATOR_SC_PCI_INTCLR BIT(1)
|
|
#define INTEGRATOR_SC_LBFADDR_OFFSET 0x20
|
|
#define INTEGRATOR_SC_LBFCODE_OFFSET 0x24
|
|
|
|
struct v3_pci {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
void __iomem *config_base;
|
|
struct pci_bus *bus;
|
|
u32 config_mem;
|
|
u32 io_mem;
|
|
u32 non_pre_mem;
|
|
u32 pre_mem;
|
|
phys_addr_t io_bus_addr;
|
|
phys_addr_t non_pre_bus_addr;
|
|
phys_addr_t pre_bus_addr;
|
|
struct regmap *map;
|
|
};
|
|
|
|
/*
|
|
* The V3 PCI interface chip in Integrator provides several windows from
|
|
* local bus memory into the PCI memory areas. Unfortunately, there
|
|
* are not really enough windows for our usage, therefore we reuse
|
|
* one of the windows for access to PCI configuration space. On the
|
|
* Integrator/AP, the memory map is as follows:
|
|
*
|
|
* Local Bus Memory Usage
|
|
*
|
|
* 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable
|
|
* 50000000 - 5FFFFFFF PCI memory. 256M prefetchable
|
|
* 60000000 - 60FFFFFF PCI IO. 16M
|
|
* 61000000 - 61FFFFFF PCI Configuration. 16M
|
|
*
|
|
* There are three V3 windows, each described by a pair of V3 registers.
|
|
* These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
|
|
* Base0 and Base1 can be used for any type of PCI memory access. Base2
|
|
* can be used either for PCI I/O or for I20 accesses. By default, uHAL
|
|
* uses this only for PCI IO space.
|
|
*
|
|
* Normally these spaces are mapped using the following base registers:
|
|
*
|
|
* Usage Local Bus Memory Base/Map registers used
|
|
*
|
|
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
|
|
* Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1
|
|
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
|
|
* Cfg 61000000 - 61FFFFFF
|
|
*
|
|
* This means that I20 and PCI configuration space accesses will fail.
|
|
* When PCI configuration accesses are needed (via the uHAL PCI
|
|
* configuration space primitives) we must remap the spaces as follows:
|
|
*
|
|
* Usage Local Bus Memory Base/Map registers used
|
|
*
|
|
* Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
|
|
* Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0
|
|
* IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
|
|
* Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1
|
|
*
|
|
* To make this work, the code depends on overlapping windows working.
|
|
* The V3 chip translates an address by checking its range within
|
|
* each of the BASE/MAP pairs in turn (in ascending register number
|
|
* order). It will use the first matching pair. So, for example,
|
|
* if the same address is mapped by both LB_BASE0/LB_MAP0 and
|
|
* LB_BASE1/LB_MAP1, the V3 will use the translation from
|
|
* LB_BASE0/LB_MAP0.
|
|
*
|
|
* To allow PCI Configuration space access, the code enlarges the
|
|
* window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes
|
|
* the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
|
|
* be remapped for use by configuration cycles.
|
|
*
|
|
* At the end of the PCI Configuration space accesses,
|
|
* LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window
|
|
* mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
|
|
* reveal the now restored LB_BASE1/LB_MAP1 window.
|
|
*
|
|
* NOTE: We do not set up I2O mapping. I suspect that this is only
|
|
* for an intelligent (target) device. Using I2O disables most of
|
|
* the mappings into PCI memory.
|
|
*/
|
|
static void __iomem *v3_map_bus(struct pci_bus *bus,
|
|
unsigned int devfn, int offset)
|
|
{
|
|
struct v3_pci *v3 = bus->sysdata;
|
|
unsigned int address, mapaddress, busnr;
|
|
|
|
busnr = bus->number;
|
|
if (busnr == 0) {
|
|
int slot = PCI_SLOT(devfn);
|
|
|
|
/*
|
|
* local bus segment so need a type 0 config cycle
|
|
*
|
|
* build the PCI configuration "address" with one-hot in
|
|
* A31-A11
|
|
*
|
|
* mapaddress:
|
|
* 3:1 = config cycle (101)
|
|
* 0 = PCI A1 & A0 are 0 (0)
|
|
*/
|
|
address = PCI_FUNC(devfn) << 8;
|
|
mapaddress = V3_LB_MAP_TYPE_CONFIG;
|
|
|
|
if (slot > 12)
|
|
/*
|
|
* high order bits are handled by the MAP register
|
|
*/
|
|
mapaddress |= BIT(slot - 5);
|
|
else
|
|
/*
|
|
* low order bits handled directly in the address
|
|
*/
|
|
address |= BIT(slot + 11);
|
|
} else {
|
|
/*
|
|
* not the local bus segment so need a type 1 config cycle
|
|
*
|
|
* address:
|
|
* 23:16 = bus number
|
|
* 15:11 = slot number (7:3 of devfn)
|
|
* 10:8 = func number (2:0 of devfn)
|
|
*
|
|
* mapaddress:
|
|
* 3:1 = config cycle (101)
|
|
* 0 = PCI A1 & A0 from host bus (1)
|
|
*/
|
|
mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
|
|
address = (busnr << 16) | (devfn << 8);
|
|
}
|
|
|
|
/*
|
|
* Set up base0 to see all 512Mbytes of memory space (not
|
|
* prefetchable), this frees up base1 for re-use by
|
|
* configuration memory
|
|
*/
|
|
writel(v3_addr_to_lb_base(v3->non_pre_mem) |
|
|
V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE,
|
|
v3->base + V3_LB_BASE0);
|
|
|
|
/*
|
|
* Set up base1/map1 to point into configuration space.
|
|
* The config mem is always 16MB.
|
|
*/
|
|
writel(v3_addr_to_lb_base(v3->config_mem) |
|
|
V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE,
|
|
v3->base + V3_LB_BASE1);
|
|
writew(mapaddress, v3->base + V3_LB_MAP1);
|
|
|
|
return v3->config_base + address + offset;
|
|
}
|
|
|
|
static void v3_unmap_bus(struct v3_pci *v3)
|
|
{
|
|
/*
|
|
* Reassign base1 for use by prefetchable PCI memory
|
|
*/
|
|
writel(v3_addr_to_lb_base(v3->pre_mem) |
|
|
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
|
|
V3_LB_BASE_ENABLE,
|
|
v3->base + V3_LB_BASE1);
|
|
writew(v3_addr_to_lb_map(v3->pre_bus_addr) |
|
|
V3_LB_MAP_TYPE_MEM, /* was V3_LB_MAP_TYPE_MEM_MULTIPLE */
|
|
v3->base + V3_LB_MAP1);
|
|
|
|
/*
|
|
* And shrink base0 back to a 256M window (NOTE: MAP0 already correct)
|
|
*/
|
|
writel(v3_addr_to_lb_base(v3->non_pre_mem) |
|
|
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE,
|
|
v3->base + V3_LB_BASE0);
|
|
}
|
|
|
|
static int v3_pci_read_config(struct pci_bus *bus, unsigned int fn,
|
|
int config, int size, u32 *value)
|
|
{
|
|
struct v3_pci *v3 = bus->sysdata;
|
|
int ret;
|
|
|
|
dev_dbg(&bus->dev,
|
|
"[read] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
|
|
PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
|
|
ret = pci_generic_config_read(bus, fn, config, size, value);
|
|
v3_unmap_bus(v3);
|
|
return ret;
|
|
}
|
|
|
|
static int v3_pci_write_config(struct pci_bus *bus, unsigned int fn,
|
|
int config, int size, u32 value)
|
|
{
|
|
struct v3_pci *v3 = bus->sysdata;
|
|
int ret;
|
|
|
|
dev_dbg(&bus->dev,
|
|
"[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
|
|
PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
|
|
ret = pci_generic_config_write(bus, fn, config, size, value);
|
|
v3_unmap_bus(v3);
|
|
return ret;
|
|
}
|
|
|
|
static struct pci_ops v3_pci_ops = {
|
|
.map_bus = v3_map_bus,
|
|
.read = v3_pci_read_config,
|
|
.write = v3_pci_write_config,
|
|
};
|
|
|
|
static irqreturn_t v3_irq(int irq, void *data)
|
|
{
|
|
struct v3_pci *v3 = data;
|
|
struct device *dev = v3->dev;
|
|
u32 status;
|
|
|
|
status = readw(v3->base + V3_PCI_STAT);
|
|
if (status & V3_PCI_STAT_PAR_ERR)
|
|
dev_err(dev, "parity error interrupt\n");
|
|
if (status & V3_PCI_STAT_SYS_ERR)
|
|
dev_err(dev, "system error interrupt\n");
|
|
if (status & V3_PCI_STAT_M_ABORT_ERR)
|
|
dev_err(dev, "master abort error interrupt\n");
|
|
if (status & V3_PCI_STAT_T_ABORT_ERR)
|
|
dev_err(dev, "target abort error interrupt\n");
|
|
writew(status, v3->base + V3_PCI_STAT);
|
|
|
|
status = readb(v3->base + V3_LB_ISTAT);
|
|
if (status & V3_LB_ISTAT_MAILBOX)
|
|
dev_info(dev, "PCI mailbox interrupt\n");
|
|
if (status & V3_LB_ISTAT_PCI_RD)
|
|
dev_err(dev, "PCI target LB->PCI READ abort interrupt\n");
|
|
if (status & V3_LB_ISTAT_PCI_WR)
|
|
dev_err(dev, "PCI target LB->PCI WRITE abort interrupt\n");
|
|
if (status & V3_LB_ISTAT_PCI_INT)
|
|
dev_info(dev, "PCI pin interrupt\n");
|
|
if (status & V3_LB_ISTAT_PCI_PERR)
|
|
dev_err(dev, "PCI parity error interrupt\n");
|
|
if (status & V3_LB_ISTAT_I2O_QWR)
|
|
dev_info(dev, "I2O inbound post queue interrupt\n");
|
|
if (status & V3_LB_ISTAT_DMA1)
|
|
dev_info(dev, "DMA channel 1 interrupt\n");
|
|
if (status & V3_LB_ISTAT_DMA0)
|
|
dev_info(dev, "DMA channel 0 interrupt\n");
|
|
/* Clear all possible interrupts on the local bus */
|
|
writeb(0, v3->base + V3_LB_ISTAT);
|
|
if (v3->map)
|
|
regmap_write(v3->map, INTEGRATOR_SC_PCI_OFFSET,
|
|
INTEGRATOR_SC_PCI_ENABLE |
|
|
INTEGRATOR_SC_PCI_INTCLR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int v3_integrator_init(struct v3_pci *v3)
|
|
{
|
|
unsigned int val;
|
|
|
|
v3->map =
|
|
syscon_regmap_lookup_by_compatible("arm,integrator-ap-syscon");
|
|
if (IS_ERR(v3->map)) {
|
|
dev_err(v3->dev, "no syscon\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
regmap_read(v3->map, INTEGRATOR_SC_PCI_OFFSET, &val);
|
|
/* Take the PCI bridge out of reset, clear IRQs */
|
|
regmap_write(v3->map, INTEGRATOR_SC_PCI_OFFSET,
|
|
INTEGRATOR_SC_PCI_ENABLE |
|
|
INTEGRATOR_SC_PCI_INTCLR);
|
|
|
|
if (!(val & INTEGRATOR_SC_PCI_ENABLE)) {
|
|
/* If we were in reset we need to sleep a bit */
|
|
msleep(230);
|
|
|
|
/* Set the physical base for the controller itself */
|
|
writel(0x6200, v3->base + V3_LB_IO_BASE);
|
|
|
|
/* Wait for the mailbox to settle after reset */
|
|
do {
|
|
writeb(0xaa, v3->base + V3_MAIL_DATA);
|
|
writeb(0x55, v3->base + V3_MAIL_DATA + 4);
|
|
} while (readb(v3->base + V3_MAIL_DATA) != 0xaa &&
|
|
readb(v3->base + V3_MAIL_DATA) != 0x55);
|
|
}
|
|
|
|
dev_info(v3->dev, "initialized PCI V3 Integrator/AP integration\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int v3_pci_setup_resource(struct v3_pci *v3,
|
|
resource_size_t io_base,
|
|
struct pci_host_bridge *host,
|
|
struct resource_entry *win)
|
|
{
|
|
struct device *dev = v3->dev;
|
|
struct resource *mem;
|
|
struct resource *io;
|
|
int ret;
|
|
|
|
switch (resource_type(win->res)) {
|
|
case IORESOURCE_IO:
|
|
io = win->res;
|
|
io->name = "V3 PCI I/O";
|
|
v3->io_mem = io_base;
|
|
v3->io_bus_addr = io->start - win->offset;
|
|
dev_dbg(dev, "I/O window %pR, bus addr %pap\n",
|
|
io, &v3->io_bus_addr);
|
|
ret = devm_pci_remap_iospace(dev, io, io_base);
|
|
if (ret) {
|
|
dev_warn(dev,
|
|
"error %d: failed to map resource %pR\n",
|
|
ret, io);
|
|
return ret;
|
|
}
|
|
/* Setup window 2 - PCI I/O */
|
|
writel(v3_addr_to_lb_base2(v3->io_mem) |
|
|
V3_LB_BASE2_ENABLE,
|
|
v3->base + V3_LB_BASE2);
|
|
writew(v3_addr_to_lb_map2(v3->io_bus_addr),
|
|
v3->base + V3_LB_MAP2);
|
|
break;
|
|
case IORESOURCE_MEM:
|
|
mem = win->res;
|
|
if (mem->flags & IORESOURCE_PREFETCH) {
|
|
mem->name = "V3 PCI PRE-MEM";
|
|
v3->pre_mem = mem->start;
|
|
v3->pre_bus_addr = mem->start - win->offset;
|
|
dev_dbg(dev, "PREFETCHABLE MEM window %pR, bus addr %pap\n",
|
|
mem, &v3->pre_bus_addr);
|
|
if (resource_size(mem) != SZ_256M) {
|
|
dev_err(dev, "prefetchable memory range is not 256MB\n");
|
|
return -EINVAL;
|
|
}
|
|
if (v3->non_pre_mem &&
|
|
(mem->start != v3->non_pre_mem + SZ_256M)) {
|
|
dev_err(dev,
|
|
"prefetchable memory is not adjacent to non-prefetchable memory\n");
|
|
return -EINVAL;
|
|
}
|
|
/* Setup window 1 - PCI prefetchable memory */
|
|
writel(v3_addr_to_lb_base(v3->pre_mem) |
|
|
V3_LB_BASE_ADR_SIZE_256MB |
|
|
V3_LB_BASE_PREFETCH |
|
|
V3_LB_BASE_ENABLE,
|
|
v3->base + V3_LB_BASE1);
|
|
writew(v3_addr_to_lb_map(v3->pre_bus_addr) |
|
|
V3_LB_MAP_TYPE_MEM, /* Was V3_LB_MAP_TYPE_MEM_MULTIPLE */
|
|
v3->base + V3_LB_MAP1);
|
|
} else {
|
|
mem->name = "V3 PCI NON-PRE-MEM";
|
|
v3->non_pre_mem = mem->start;
|
|
v3->non_pre_bus_addr = mem->start - win->offset;
|
|
dev_dbg(dev, "NON-PREFETCHABLE MEM window %pR, bus addr %pap\n",
|
|
mem, &v3->non_pre_bus_addr);
|
|
if (resource_size(mem) != SZ_256M) {
|
|
dev_err(dev,
|
|
"non-prefetchable memory range is not 256MB\n");
|
|
return -EINVAL;
|
|
}
|
|
/* Setup window 0 - PCI non-prefetchable memory */
|
|
writel(v3_addr_to_lb_base(v3->non_pre_mem) |
|
|
V3_LB_BASE_ADR_SIZE_256MB |
|
|
V3_LB_BASE_ENABLE,
|
|
v3->base + V3_LB_BASE0);
|
|
writew(v3_addr_to_lb_map(v3->non_pre_bus_addr) |
|
|
V3_LB_MAP_TYPE_MEM,
|
|
v3->base + V3_LB_MAP0);
|
|
}
|
|
break;
|
|
case IORESOURCE_BUS:
|
|
dev_dbg(dev, "BUS %pR\n", win->res);
|
|
host->busnr = win->res->start;
|
|
break;
|
|
default:
|
|
dev_info(dev, "Unknown resource type %lu\n",
|
|
resource_type(win->res));
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int v3_get_dma_range_config(struct v3_pci *v3,
|
|
struct of_pci_range *range,
|
|
u32 *pci_base, u32 *pci_map)
|
|
{
|
|
struct device *dev = v3->dev;
|
|
u64 cpu_end = range->cpu_addr + range->size - 1;
|
|
u64 pci_end = range->pci_addr + range->size - 1;
|
|
u32 val;
|
|
|
|
if (range->pci_addr & ~V3_PCI_BASE_M_ADR_BASE) {
|
|
dev_err(dev, "illegal range, only PCI bits 31..20 allowed\n");
|
|
return -EINVAL;
|
|
}
|
|
val = ((u32)range->pci_addr) & V3_PCI_BASE_M_ADR_BASE;
|
|
*pci_base = val;
|
|
|
|
if (range->cpu_addr & ~V3_PCI_MAP_M_MAP_ADR) {
|
|
dev_err(dev, "illegal range, only CPU bits 31..20 allowed\n");
|
|
return -EINVAL;
|
|
}
|
|
val = ((u32)range->cpu_addr) & V3_PCI_MAP_M_MAP_ADR;
|
|
|
|
switch (range->size) {
|
|
case SZ_1M:
|
|
val |= V3_LB_BASE_ADR_SIZE_1MB;
|
|
break;
|
|
case SZ_2M:
|
|
val |= V3_LB_BASE_ADR_SIZE_2MB;
|
|
break;
|
|
case SZ_4M:
|
|
val |= V3_LB_BASE_ADR_SIZE_4MB;
|
|
break;
|
|
case SZ_8M:
|
|
val |= V3_LB_BASE_ADR_SIZE_8MB;
|
|
break;
|
|
case SZ_16M:
|
|
val |= V3_LB_BASE_ADR_SIZE_16MB;
|
|
break;
|
|
case SZ_32M:
|
|
val |= V3_LB_BASE_ADR_SIZE_32MB;
|
|
break;
|
|
case SZ_64M:
|
|
val |= V3_LB_BASE_ADR_SIZE_64MB;
|
|
break;
|
|
case SZ_128M:
|
|
val |= V3_LB_BASE_ADR_SIZE_128MB;
|
|
break;
|
|
case SZ_256M:
|
|
val |= V3_LB_BASE_ADR_SIZE_256MB;
|
|
break;
|
|
case SZ_512M:
|
|
val |= V3_LB_BASE_ADR_SIZE_512MB;
|
|
break;
|
|
case SZ_1G:
|
|
val |= V3_LB_BASE_ADR_SIZE_1GB;
|
|
break;
|
|
case SZ_2G:
|
|
val |= V3_LB_BASE_ADR_SIZE_2GB;
|
|
break;
|
|
default:
|
|
dev_err(v3->dev, "illegal dma memory chunk size\n");
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
val |= V3_PCI_MAP_M_REG_EN | V3_PCI_MAP_M_ENABLE;
|
|
*pci_map = val;
|
|
|
|
dev_dbg(dev,
|
|
"DMA MEM CPU: 0x%016llx -> 0x%016llx => "
|
|
"PCI: 0x%016llx -> 0x%016llx base %08x map %08x\n",
|
|
range->cpu_addr, cpu_end,
|
|
range->pci_addr, pci_end,
|
|
*pci_base, *pci_map);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int v3_pci_parse_map_dma_ranges(struct v3_pci *v3,
|
|
struct device_node *np)
|
|
{
|
|
struct of_pci_range range;
|
|
struct of_pci_range_parser parser;
|
|
struct device *dev = v3->dev;
|
|
int i = 0;
|
|
|
|
if (of_pci_dma_range_parser_init(&parser, np)) {
|
|
dev_err(dev, "missing dma-ranges property\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Get the dma-ranges from the device tree
|
|
*/
|
|
for_each_of_pci_range(&parser, &range) {
|
|
int ret;
|
|
u32 pci_base, pci_map;
|
|
|
|
ret = v3_get_dma_range_config(v3, &range, &pci_base, &pci_map);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (i == 0) {
|
|
writel(pci_base, v3->base + V3_PCI_BASE0);
|
|
writel(pci_map, v3->base + V3_PCI_MAP0);
|
|
} else if (i == 1) {
|
|
writel(pci_base, v3->base + V3_PCI_BASE1);
|
|
writel(pci_map, v3->base + V3_PCI_MAP1);
|
|
} else {
|
|
dev_err(dev, "too many ranges, only two supported\n");
|
|
dev_err(dev, "range %d ignored\n", i);
|
|
}
|
|
i++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int v3_pci_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
resource_size_t io_base;
|
|
struct resource *regs;
|
|
struct resource_entry *win;
|
|
struct v3_pci *v3;
|
|
struct pci_host_bridge *host;
|
|
struct clk *clk;
|
|
u16 val;
|
|
int irq;
|
|
int ret;
|
|
LIST_HEAD(res);
|
|
|
|
host = pci_alloc_host_bridge(sizeof(*v3));
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
host->dev.parent = dev;
|
|
host->ops = &v3_pci_ops;
|
|
host->busnr = 0;
|
|
host->msi = NULL;
|
|
host->map_irq = of_irq_parse_and_map_pci;
|
|
host->swizzle_irq = pci_common_swizzle;
|
|
v3 = pci_host_bridge_priv(host);
|
|
host->sysdata = v3;
|
|
v3->dev = dev;
|
|
|
|
/* Get and enable host clock */
|
|
clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "clock not found\n");
|
|
return PTR_ERR(clk);
|
|
}
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
v3->base = devm_ioremap_resource(dev, regs);
|
|
if (IS_ERR(v3->base))
|
|
return PTR_ERR(v3->base);
|
|
/*
|
|
* The hardware has a register with the physical base address
|
|
* of the V3 controller itself, verify that this is the same
|
|
* as the physical memory we've remapped it from.
|
|
*/
|
|
if (readl(v3->base + V3_LB_IO_BASE) != (regs->start >> 16))
|
|
dev_err(dev, "V3_LB_IO_BASE = %08x but device is @%pR\n",
|
|
readl(v3->base + V3_LB_IO_BASE), regs);
|
|
|
|
/* Configuration space is 16MB directly mapped */
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (resource_size(regs) != SZ_16M) {
|
|
dev_err(dev, "config mem is not 16MB!\n");
|
|
return -EINVAL;
|
|
}
|
|
v3->config_mem = regs->start;
|
|
v3->config_base = devm_ioremap_resource(dev, regs);
|
|
if (IS_ERR(v3->config_base))
|
|
return PTR_ERR(v3->config_base);
|
|
|
|
ret = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff, &res,
|
|
&io_base);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_request_pci_bus_resources(dev, &res);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Get and request error IRQ resource */
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0) {
|
|
dev_err(dev, "unable to obtain PCIv3 error IRQ\n");
|
|
return -ENODEV;
|
|
}
|
|
ret = devm_request_irq(dev, irq, v3_irq, 0,
|
|
"PCIv3 error", v3);
|
|
if (ret < 0) {
|
|
dev_err(dev,
|
|
"unable to request PCIv3 error IRQ %d (%d)\n",
|
|
irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Unlock V3 registers, but only if they were previously locked.
|
|
*/
|
|
if (readw(v3->base + V3_SYSTEM) & V3_SYSTEM_M_LOCK)
|
|
writew(V3_SYSTEM_UNLOCK, v3->base + V3_SYSTEM);
|
|
|
|
/* Disable all slave access while we set up the windows */
|
|
val = readw(v3->base + V3_PCI_CMD);
|
|
val &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
|
writew(val, v3->base + V3_PCI_CMD);
|
|
|
|
/* Put the PCI bus into reset */
|
|
val = readw(v3->base + V3_SYSTEM);
|
|
val &= ~V3_SYSTEM_M_RST_OUT;
|
|
writew(val, v3->base + V3_SYSTEM);
|
|
|
|
/* Retry until we're ready */
|
|
val = readw(v3->base + V3_PCI_CFG);
|
|
val |= V3_PCI_CFG_M_RETRY_EN;
|
|
writew(val, v3->base + V3_PCI_CFG);
|
|
|
|
/* Set up the local bus protocol */
|
|
val = readw(v3->base + V3_LB_CFG);
|
|
val |= V3_LB_CFG_LB_BE_IMODE; /* Byte enable input */
|
|
val |= V3_LB_CFG_LB_BE_OMODE; /* Byte enable output */
|
|
val &= ~V3_LB_CFG_LB_ENDIAN; /* Little endian */
|
|
val &= ~V3_LB_CFG_LB_PPC_RDY; /* TODO: when using on PPC403Gx, set to 1 */
|
|
writew(val, v3->base + V3_LB_CFG);
|
|
|
|
/* Enable the PCI bus master */
|
|
val = readw(v3->base + V3_PCI_CMD);
|
|
val |= PCI_COMMAND_MASTER;
|
|
writew(val, v3->base + V3_PCI_CMD);
|
|
|
|
/* Get the I/O and memory ranges from DT */
|
|
resource_list_for_each_entry(win, &res) {
|
|
ret = v3_pci_setup_resource(v3, io_base, host, win);
|
|
if (ret) {
|
|
dev_err(dev, "error setting up resources\n");
|
|
return ret;
|
|
}
|
|
}
|
|
ret = v3_pci_parse_map_dma_ranges(v3, np);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Disable PCI to host IO cycles, enable I/O buffers @3.3V,
|
|
* set AD_LOW0 to 1 if one of the LB_MAP registers choose
|
|
* to use this (should be unused).
|
|
*/
|
|
writel(0x00000000, v3->base + V3_PCI_IO_BASE);
|
|
val = V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS |
|
|
V3_PCI_CFG_M_EN3V | V3_PCI_CFG_M_AD_LOW0;
|
|
/*
|
|
* DMA read and write from PCI bus commands types
|
|
*/
|
|
val |= V3_PCI_CFG_TYPE_DEFAULT << V3_PCI_CFG_M_RTYPE_SHIFT;
|
|
val |= V3_PCI_CFG_TYPE_DEFAULT << V3_PCI_CFG_M_WTYPE_SHIFT;
|
|
writew(val, v3->base + V3_PCI_CFG);
|
|
|
|
/*
|
|
* Set the V3 FIFO such that writes have higher priority than
|
|
* reads, and local bus write causes local bus read fifo flush
|
|
* on aperture 1. Same for PCI.
|
|
*/
|
|
writew(V3_FIFO_PRIO_LB_RD1_FLUSH_AP1 |
|
|
V3_FIFO_PRIO_LB_RD0_FLUSH_AP1 |
|
|
V3_FIFO_PRIO_PCI_RD1_FLUSH_AP1 |
|
|
V3_FIFO_PRIO_PCI_RD0_FLUSH_AP1,
|
|
v3->base + V3_FIFO_PRIORITY);
|
|
|
|
|
|
/*
|
|
* Clear any error interrupts, and enable parity and write error
|
|
* interrupts
|
|
*/
|
|
writeb(0, v3->base + V3_LB_ISTAT);
|
|
val = readw(v3->base + V3_LB_CFG);
|
|
val |= V3_LB_CFG_LB_LB_INT;
|
|
writew(val, v3->base + V3_LB_CFG);
|
|
writeb(V3_LB_ISTAT_PCI_WR | V3_LB_ISTAT_PCI_PERR,
|
|
v3->base + V3_LB_IMASK);
|
|
|
|
/* Special Integrator initialization */
|
|
if (of_device_is_compatible(np, "arm,integrator-ap-pci")) {
|
|
ret = v3_integrator_init(v3);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Post-init: enable PCI memory and invalidate (master already on) */
|
|
val = readw(v3->base + V3_PCI_CMD);
|
|
val |= PCI_COMMAND_MEMORY | PCI_COMMAND_INVALIDATE;
|
|
writew(val, v3->base + V3_PCI_CMD);
|
|
|
|
/* Clear pending interrupts */
|
|
writeb(0, v3->base + V3_LB_ISTAT);
|
|
/* Read or write errors and parity errors cause interrupts */
|
|
writeb(V3_LB_ISTAT_PCI_RD | V3_LB_ISTAT_PCI_WR | V3_LB_ISTAT_PCI_PERR,
|
|
v3->base + V3_LB_IMASK);
|
|
|
|
/* Take the PCI bus out of reset so devices can initialize */
|
|
val = readw(v3->base + V3_SYSTEM);
|
|
val |= V3_SYSTEM_M_RST_OUT;
|
|
writew(val, v3->base + V3_SYSTEM);
|
|
|
|
/*
|
|
* Re-lock the system register.
|
|
*/
|
|
val = readw(v3->base + V3_SYSTEM);
|
|
val |= V3_SYSTEM_M_LOCK;
|
|
writew(val, v3->base + V3_SYSTEM);
|
|
|
|
list_splice_init(&res, &host->windows);
|
|
ret = pci_scan_root_bus_bridge(host);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register host: %d\n", ret);
|
|
return ret;
|
|
}
|
|
v3->bus = host->bus;
|
|
|
|
pci_bus_assign_resources(v3->bus);
|
|
pci_bus_add_devices(v3->bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id v3_pci_of_match[] = {
|
|
{
|
|
.compatible = "v3,v360epc-pci",
|
|
},
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver v3_pci_driver = {
|
|
.driver = {
|
|
.name = "pci-v3-semi",
|
|
.of_match_table = of_match_ptr(v3_pci_of_match),
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = v3_pci_probe,
|
|
};
|
|
builtin_platform_driver(v3_pci_driver);
|