mirror of https://gitee.com/openkylin/linux.git
449 lines
13 KiB
C
449 lines
13 KiB
C
/*
|
|
* 1-Wire implementation for Maxim Semiconductor
|
|
* MAX7211/MAX17215 stanalone fuel gauge chip
|
|
*
|
|
* Copyright (C) 2017 Radioavionica Corporation
|
|
* Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
|
|
*
|
|
* Use consistent with the GNU GPL is permitted,
|
|
* provided that this copyright notice is
|
|
* preserved in its entirety in all copies and derived works.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/w1.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/power_supply.h>
|
|
|
|
#define W1_MAX1721X_FAMILY_ID 0x26
|
|
#define DEF_DEV_NAME_MAX17211 "MAX17211"
|
|
#define DEF_DEV_NAME_MAX17215 "MAX17215"
|
|
#define DEF_DEV_NAME_UNKNOWN "UNKNOWN"
|
|
#define DEF_MFG_NAME "MAXIM"
|
|
|
|
#define PSY_MAX_NAME_LEN 32
|
|
|
|
/* Number of valid register addresses in W1 mode */
|
|
#define MAX1721X_MAX_REG_NR 0x1EF
|
|
|
|
/* Factory settings (nonvilatile registers) (W1 specific) */
|
|
#define MAX1721X_REG_NRSENSE 0x1CF /* RSense in 10^-5 Ohm */
|
|
/* Strings */
|
|
#define MAX1721X_REG_MFG_STR 0x1CC
|
|
#define MAX1721X_REG_MFG_NUMB 3
|
|
#define MAX1721X_REG_DEV_STR 0x1DB
|
|
#define MAX1721X_REG_DEV_NUMB 5
|
|
/* HEX Strings */
|
|
#define MAX1721X_REG_SER_HEX 0x1D8
|
|
|
|
/* MAX172XX Output Registers for W1 chips */
|
|
#define MAX172XX_REG_STATUS 0x000 /* status reg */
|
|
#define MAX172XX_BAT_PRESENT (1<<4) /* battery connected bit */
|
|
#define MAX172XX_REG_DEVNAME 0x021 /* chip config */
|
|
#define MAX172XX_DEV_MASK 0x000F /* chip type mask */
|
|
#define MAX172X1_DEV 0x0001
|
|
#define MAX172X5_DEV 0x0005
|
|
#define MAX172XX_REG_TEMP 0x008 /* Temperature */
|
|
#define MAX172XX_REG_BATT 0x0DA /* Battery voltage */
|
|
#define MAX172XX_REG_CURRENT 0x00A /* Actual current */
|
|
#define MAX172XX_REG_AVGCURRENT 0x00B /* Average current */
|
|
#define MAX172XX_REG_REPSOC 0x006 /* Percentage of charge */
|
|
#define MAX172XX_REG_DESIGNCAP 0x018 /* Design capacity */
|
|
#define MAX172XX_REG_REPCAP 0x005 /* Average capacity */
|
|
#define MAX172XX_REG_TTE 0x011 /* Time to empty */
|
|
#define MAX172XX_REG_TTF 0x020 /* Time to full */
|
|
|
|
struct max17211_device_info {
|
|
char name[PSY_MAX_NAME_LEN];
|
|
struct power_supply *bat;
|
|
struct power_supply_desc bat_desc;
|
|
struct device *w1_dev;
|
|
struct regmap *regmap;
|
|
/* battery design format */
|
|
unsigned int rsense; /* in tenths uOhm */
|
|
char DeviceName[2 * MAX1721X_REG_DEV_NUMB + 1];
|
|
char ManufacturerName[2 * MAX1721X_REG_MFG_NUMB + 1];
|
|
char SerialNumber[13]; /* see get_sn_str() later for comment */
|
|
};
|
|
|
|
/* Convert regs value to power_supply units */
|
|
|
|
static inline int max172xx_time_to_ps(unsigned int reg)
|
|
{
|
|
return reg * 5625 / 1000; /* in sec. */
|
|
}
|
|
|
|
static inline int max172xx_percent_to_ps(unsigned int reg)
|
|
{
|
|
return reg / 256; /* in percent from 0 to 100 */
|
|
}
|
|
|
|
static inline int max172xx_voltage_to_ps(unsigned int reg)
|
|
{
|
|
return reg * 1250; /* in uV */
|
|
}
|
|
|
|
static inline int max172xx_capacity_to_ps(unsigned int reg)
|
|
{
|
|
return reg * 500; /* in uAh */
|
|
}
|
|
|
|
/*
|
|
* Current and temperature is signed values, so unsigned regs
|
|
* value must be converted to signed type
|
|
*/
|
|
|
|
static inline int max172xx_temperature_to_ps(unsigned int reg)
|
|
{
|
|
int val = (int16_t)(reg);
|
|
|
|
return val * 10 / 256; /* in tenths of deg. C */
|
|
}
|
|
|
|
/*
|
|
* Calculating current registers resolution:
|
|
*
|
|
* RSense stored in 10^-5 Ohm, so mesaurment voltage must be
|
|
* in 10^-11 Volts for get current in uA.
|
|
* 16 bit current reg fullscale +/-51.2mV is 102400 uV.
|
|
* So: 102400 / 65535 * 10^5 = 156252
|
|
*/
|
|
static inline int max172xx_current_to_voltage(unsigned int reg)
|
|
{
|
|
int val = (int16_t)(reg);
|
|
|
|
return val * 156252;
|
|
}
|
|
|
|
|
|
static inline struct max17211_device_info *
|
|
to_device_info(struct power_supply *psy)
|
|
{
|
|
return power_supply_get_drvdata(psy);
|
|
}
|
|
|
|
static int max1721x_battery_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct max17211_device_info *info = to_device_info(psy);
|
|
unsigned int reg = 0;
|
|
int ret = 0;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
/*
|
|
* POWER_SUPPLY_PROP_PRESENT will always readable via
|
|
* sysfs interface. Value return 0 if battery not
|
|
* present or unaccesable via W1.
|
|
*/
|
|
val->intval =
|
|
regmap_read(info->regmap, MAX172XX_REG_STATUS,
|
|
®) ? 0 : !(reg & MAX172XX_BAT_PRESENT);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
ret = regmap_read(info->regmap, MAX172XX_REG_REPSOC, ®);
|
|
val->intval = max172xx_percent_to_ps(reg);
|
|
break;
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
ret = regmap_read(info->regmap, MAX172XX_REG_BATT, ®);
|
|
val->intval = max172xx_voltage_to_ps(reg);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
|
|
ret = regmap_read(info->regmap, MAX172XX_REG_DESIGNCAP, ®);
|
|
val->intval = max172xx_capacity_to_ps(reg);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_AVG:
|
|
ret = regmap_read(info->regmap, MAX172XX_REG_REPCAP, ®);
|
|
val->intval = max172xx_capacity_to_ps(reg);
|
|
break;
|
|
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
|
|
ret = regmap_read(info->regmap, MAX172XX_REG_TTE, ®);
|
|
val->intval = max172xx_time_to_ps(reg);
|
|
break;
|
|
case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
|
|
ret = regmap_read(info->regmap, MAX172XX_REG_TTF, ®);
|
|
val->intval = max172xx_time_to_ps(reg);
|
|
break;
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
ret = regmap_read(info->regmap, MAX172XX_REG_TEMP, ®);
|
|
val->intval = max172xx_temperature_to_ps(reg);
|
|
break;
|
|
/* We need signed current, so must cast info->rsense to signed type */
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
ret = regmap_read(info->regmap, MAX172XX_REG_CURRENT, ®);
|
|
val->intval =
|
|
max172xx_current_to_voltage(reg) / (int)info->rsense;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CURRENT_AVG:
|
|
ret = regmap_read(info->regmap, MAX172XX_REG_AVGCURRENT, ®);
|
|
val->intval =
|
|
max172xx_current_to_voltage(reg) / (int)info->rsense;
|
|
break;
|
|
/*
|
|
* Strings already received and inited by probe.
|
|
* We do dummy read for check battery still available.
|
|
*/
|
|
case POWER_SUPPLY_PROP_MODEL_NAME:
|
|
ret = regmap_read(info->regmap, MAX1721X_REG_DEV_STR, ®);
|
|
val->strval = info->DeviceName;
|
|
break;
|
|
case POWER_SUPPLY_PROP_MANUFACTURER:
|
|
ret = regmap_read(info->regmap, MAX1721X_REG_MFG_STR, ®);
|
|
val->strval = info->ManufacturerName;
|
|
break;
|
|
case POWER_SUPPLY_PROP_SERIAL_NUMBER:
|
|
ret = regmap_read(info->regmap, MAX1721X_REG_SER_HEX, ®);
|
|
val->strval = info->SerialNumber;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum power_supply_property max1721x_battery_props[] = {
|
|
/* int */
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_CAPACITY,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
|
|
POWER_SUPPLY_PROP_CHARGE_AVG,
|
|
POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
|
|
POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
|
|
POWER_SUPPLY_PROP_TEMP,
|
|
POWER_SUPPLY_PROP_CURRENT_NOW,
|
|
POWER_SUPPLY_PROP_CURRENT_AVG,
|
|
/* strings */
|
|
POWER_SUPPLY_PROP_MODEL_NAME,
|
|
POWER_SUPPLY_PROP_MANUFACTURER,
|
|
POWER_SUPPLY_PROP_SERIAL_NUMBER,
|
|
};
|
|
|
|
static int get_string(struct max17211_device_info *info,
|
|
uint16_t reg, uint8_t nr, char *str)
|
|
{
|
|
unsigned int val;
|
|
|
|
if (!str || !(reg == MAX1721X_REG_MFG_STR ||
|
|
reg == MAX1721X_REG_DEV_STR))
|
|
return -EFAULT;
|
|
|
|
while (nr--) {
|
|
if (regmap_read(info->regmap, reg++, &val))
|
|
return -EFAULT;
|
|
*str++ = val>>8 & 0x00FF;
|
|
*str++ = val & 0x00FF;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Maxim say: Serial number is a hex string up to 12 hex characters */
|
|
static int get_sn_string(struct max17211_device_info *info, char *str)
|
|
{
|
|
unsigned int val[3];
|
|
|
|
if (!str)
|
|
return -EFAULT;
|
|
|
|
if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &val[0]))
|
|
return -EFAULT;
|
|
if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 1, &val[1]))
|
|
return -EFAULT;
|
|
if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 2, &val[2]))
|
|
return -EFAULT;
|
|
|
|
snprintf(str, 13, "%04X%04X%04X", val[0], val[1], val[2]);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* MAX1721x registers description for w1-regmap
|
|
*/
|
|
static const struct regmap_range max1721x_allow_range[] = {
|
|
regmap_reg_range(0, 0xDF), /* volatile data */
|
|
regmap_reg_range(0x180, 0x1DF), /* non-volatile memory */
|
|
regmap_reg_range(0x1E0, 0x1EF), /* non-volatile history (unused) */
|
|
};
|
|
|
|
static const struct regmap_range max1721x_deny_range[] = {
|
|
/* volatile data unused registers */
|
|
regmap_reg_range(0x24, 0x26),
|
|
regmap_reg_range(0x30, 0x31),
|
|
regmap_reg_range(0x33, 0x34),
|
|
regmap_reg_range(0x37, 0x37),
|
|
regmap_reg_range(0x3B, 0x3C),
|
|
regmap_reg_range(0x40, 0x41),
|
|
regmap_reg_range(0x43, 0x44),
|
|
regmap_reg_range(0x47, 0x49),
|
|
regmap_reg_range(0x4B, 0x4C),
|
|
regmap_reg_range(0x4E, 0xAF),
|
|
regmap_reg_range(0xB1, 0xB3),
|
|
regmap_reg_range(0xB5, 0xB7),
|
|
regmap_reg_range(0xBF, 0xD0),
|
|
regmap_reg_range(0xDB, 0xDB),
|
|
/* hole between volatile and non-volatile registers */
|
|
regmap_reg_range(0xE0, 0x17F),
|
|
};
|
|
|
|
static const struct regmap_access_table max1721x_regs = {
|
|
.yes_ranges = max1721x_allow_range,
|
|
.n_yes_ranges = ARRAY_SIZE(max1721x_allow_range),
|
|
.no_ranges = max1721x_deny_range,
|
|
.n_no_ranges = ARRAY_SIZE(max1721x_deny_range),
|
|
};
|
|
|
|
/*
|
|
* Model Gauge M5 Algorithm output register
|
|
* Volatile data (must not be cached)
|
|
*/
|
|
static const struct regmap_range max1721x_volatile_allow[] = {
|
|
regmap_reg_range(0, 0xDF),
|
|
};
|
|
|
|
static const struct regmap_access_table max1721x_volatile_regs = {
|
|
.yes_ranges = max1721x_volatile_allow,
|
|
.n_yes_ranges = ARRAY_SIZE(max1721x_volatile_allow),
|
|
};
|
|
|
|
/*
|
|
* W1-regmap config
|
|
*/
|
|
static const struct regmap_config max1721x_regmap_w1_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 16,
|
|
.rd_table = &max1721x_regs,
|
|
.volatile_table = &max1721x_volatile_regs,
|
|
.max_register = MAX1721X_MAX_REG_NR,
|
|
};
|
|
|
|
static int devm_w1_max1721x_add_device(struct w1_slave *sl)
|
|
{
|
|
struct power_supply_config psy_cfg = {};
|
|
struct max17211_device_info *info;
|
|
|
|
info = devm_kzalloc(&sl->dev, sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
sl->family_data = (void *)info;
|
|
info->w1_dev = &sl->dev;
|
|
|
|
/*
|
|
* power_supply class battery name translated from W1 slave device
|
|
* unical ID (look like 26-0123456789AB) to "max1721x-0123456789AB\0"
|
|
* so, 26 (device family) correcpondent to max1721x devices.
|
|
* Device name still unical for any numbers connected devices.
|
|
*/
|
|
snprintf(info->name, sizeof(info->name),
|
|
"max1721x-%012X", (unsigned int)sl->reg_num.id);
|
|
info->bat_desc.name = info->name;
|
|
|
|
/*
|
|
* FixMe: battery device name exceed max len for thermal_zone device
|
|
* name and translation to thermal_zone must be disabled.
|
|
*/
|
|
info->bat_desc.no_thermal = true;
|
|
info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
|
|
info->bat_desc.properties = max1721x_battery_props;
|
|
info->bat_desc.num_properties = ARRAY_SIZE(max1721x_battery_props);
|
|
info->bat_desc.get_property = max1721x_battery_get_property;
|
|
psy_cfg.drv_data = info;
|
|
|
|
/* regmap init */
|
|
info->regmap = devm_regmap_init_w1(info->w1_dev,
|
|
&max1721x_regmap_w1_config);
|
|
if (IS_ERR(info->regmap)) {
|
|
int err = PTR_ERR(info->regmap);
|
|
|
|
dev_err(info->w1_dev, "Failed to allocate register map: %d\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
/* rsense init */
|
|
info->rsense = 0;
|
|
if (regmap_read(info->regmap, MAX1721X_REG_NRSENSE, &info->rsense)) {
|
|
dev_err(info->w1_dev, "Can't read RSense. Hardware error.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!info->rsense) {
|
|
dev_warn(info->w1_dev, "RSenese not calibrated, set 10 mOhms!\n");
|
|
info->rsense = 1000; /* in regs in 10^-5 */
|
|
}
|
|
dev_info(info->w1_dev, "RSense: %d mOhms.\n", info->rsense / 100);
|
|
|
|
if (get_string(info, MAX1721X_REG_MFG_STR,
|
|
MAX1721X_REG_MFG_NUMB, info->ManufacturerName)) {
|
|
dev_err(info->w1_dev, "Can't read manufacturer. Hardware error.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!info->ManufacturerName[0])
|
|
strncpy(info->ManufacturerName, DEF_MFG_NAME,
|
|
2 * MAX1721X_REG_MFG_NUMB);
|
|
|
|
if (get_string(info, MAX1721X_REG_DEV_STR,
|
|
MAX1721X_REG_DEV_NUMB, info->DeviceName)) {
|
|
dev_err(info->w1_dev, "Can't read device. Hardware error.\n");
|
|
return -ENODEV;
|
|
}
|
|
if (!info->DeviceName[0]) {
|
|
unsigned int dev_name;
|
|
|
|
if (regmap_read(info->regmap,
|
|
MAX172XX_REG_DEVNAME, &dev_name)) {
|
|
dev_err(info->w1_dev, "Can't read device name reg.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
switch (dev_name & MAX172XX_DEV_MASK) {
|
|
case MAX172X1_DEV:
|
|
strncpy(info->DeviceName, DEF_DEV_NAME_MAX17211,
|
|
2 * MAX1721X_REG_DEV_NUMB);
|
|
break;
|
|
case MAX172X5_DEV:
|
|
strncpy(info->DeviceName, DEF_DEV_NAME_MAX17215,
|
|
2 * MAX1721X_REG_DEV_NUMB);
|
|
break;
|
|
default:
|
|
strncpy(info->DeviceName, DEF_DEV_NAME_UNKNOWN,
|
|
2 * MAX1721X_REG_DEV_NUMB);
|
|
}
|
|
}
|
|
|
|
if (get_sn_string(info, info->SerialNumber)) {
|
|
dev_err(info->w1_dev, "Can't read serial. Hardware error.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
info->bat = devm_power_supply_register(&sl->dev, &info->bat_desc,
|
|
&psy_cfg);
|
|
if (IS_ERR(info->bat)) {
|
|
dev_err(info->w1_dev, "failed to register battery\n");
|
|
return PTR_ERR(info->bat);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct w1_family_ops w1_max1721x_fops = {
|
|
.add_slave = devm_w1_max1721x_add_device,
|
|
};
|
|
|
|
static struct w1_family w1_max1721x_family = {
|
|
.fid = W1_MAX1721X_FAMILY_ID,
|
|
.fops = &w1_max1721x_fops,
|
|
};
|
|
|
|
module_w1_family(w1_max1721x_family);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Alex A. Mihaylov <minimumlaw@rambler.ru>");
|
|
MODULE_DESCRIPTION("Maxim MAX17211/MAX17215 Fuel Gauage IC driver");
|
|
MODULE_ALIAS("w1-family-" __stringify(W1_MAX1721X_FAMILY_ID));
|