mirror of https://gitee.com/openkylin/linux.git
774 lines
18 KiB
C
774 lines
18 KiB
C
/*
|
|
* Driver for the Solomon SSD1307 OLED controller
|
|
*
|
|
* Copyright 2012 Free Electrons
|
|
*
|
|
* Licensed under the GPLv2 or later.
|
|
*/
|
|
|
|
#include <linux/backlight.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#define SSD1307FB_DATA 0x40
|
|
#define SSD1307FB_COMMAND 0x80
|
|
|
|
#define SSD1307FB_SET_ADDRESS_MODE 0x20
|
|
#define SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL (0x00)
|
|
#define SSD1307FB_SET_ADDRESS_MODE_VERTICAL (0x01)
|
|
#define SSD1307FB_SET_ADDRESS_MODE_PAGE (0x02)
|
|
#define SSD1307FB_SET_COL_RANGE 0x21
|
|
#define SSD1307FB_SET_PAGE_RANGE 0x22
|
|
#define SSD1307FB_CONTRAST 0x81
|
|
#define SSD1307FB_CHARGE_PUMP 0x8d
|
|
#define SSD1307FB_SEG_REMAP_ON 0xa1
|
|
#define SSD1307FB_DISPLAY_OFF 0xae
|
|
#define SSD1307FB_SET_MULTIPLEX_RATIO 0xa8
|
|
#define SSD1307FB_DISPLAY_ON 0xaf
|
|
#define SSD1307FB_START_PAGE_ADDRESS 0xb0
|
|
#define SSD1307FB_SET_DISPLAY_OFFSET 0xd3
|
|
#define SSD1307FB_SET_CLOCK_FREQ 0xd5
|
|
#define SSD1307FB_SET_PRECHARGE_PERIOD 0xd9
|
|
#define SSD1307FB_SET_COM_PINS_CONFIG 0xda
|
|
#define SSD1307FB_SET_VCOMH 0xdb
|
|
|
|
#define MAX_CONTRAST 255
|
|
|
|
#define REFRESHRATE 1
|
|
|
|
static u_int refreshrate = REFRESHRATE;
|
|
module_param(refreshrate, uint, 0);
|
|
|
|
struct ssd1307fb_par;
|
|
|
|
struct ssd1307fb_deviceinfo {
|
|
u32 default_vcomh;
|
|
u32 default_dclk_div;
|
|
u32 default_dclk_frq;
|
|
int need_pwm;
|
|
int need_chargepump;
|
|
};
|
|
|
|
struct ssd1307fb_par {
|
|
u32 com_invdir;
|
|
u32 com_lrremap;
|
|
u32 com_offset;
|
|
u32 com_seq;
|
|
u32 contrast;
|
|
u32 dclk_div;
|
|
u32 dclk_frq;
|
|
const struct ssd1307fb_deviceinfo *device_info;
|
|
struct i2c_client *client;
|
|
u32 height;
|
|
struct fb_info *info;
|
|
u32 page_offset;
|
|
u32 prechargep1;
|
|
u32 prechargep2;
|
|
struct pwm_device *pwm;
|
|
u32 pwm_period;
|
|
struct gpio_desc *reset;
|
|
struct regulator *vbat_reg;
|
|
u32 seg_remap;
|
|
u32 vcomh;
|
|
u32 width;
|
|
};
|
|
|
|
struct ssd1307fb_array {
|
|
u8 type;
|
|
u8 data[0];
|
|
};
|
|
|
|
static const struct fb_fix_screeninfo ssd1307fb_fix = {
|
|
.id = "Solomon SSD1307",
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.visual = FB_VISUAL_MONO10,
|
|
.xpanstep = 0,
|
|
.ypanstep = 0,
|
|
.ywrapstep = 0,
|
|
.accel = FB_ACCEL_NONE,
|
|
};
|
|
|
|
static const struct fb_var_screeninfo ssd1307fb_var = {
|
|
.bits_per_pixel = 1,
|
|
};
|
|
|
|
static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type)
|
|
{
|
|
struct ssd1307fb_array *array;
|
|
|
|
array = kzalloc(sizeof(struct ssd1307fb_array) + len, GFP_KERNEL);
|
|
if (!array)
|
|
return NULL;
|
|
|
|
array->type = type;
|
|
|
|
return array;
|
|
}
|
|
|
|
static int ssd1307fb_write_array(struct i2c_client *client,
|
|
struct ssd1307fb_array *array, u32 len)
|
|
{
|
|
int ret;
|
|
|
|
len += sizeof(struct ssd1307fb_array);
|
|
|
|
ret = i2c_master_send(client, (u8 *)array, len);
|
|
if (ret != len) {
|
|
dev_err(&client->dev, "Couldn't send I2C command.\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
|
|
{
|
|
struct ssd1307fb_array *array;
|
|
int ret;
|
|
|
|
array = ssd1307fb_alloc_array(1, SSD1307FB_COMMAND);
|
|
if (!array)
|
|
return -ENOMEM;
|
|
|
|
array->data[0] = cmd;
|
|
|
|
ret = ssd1307fb_write_array(client, array, 1);
|
|
kfree(array);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ssd1307fb_update_display(struct ssd1307fb_par *par)
|
|
{
|
|
struct ssd1307fb_array *array;
|
|
u8 *vmem = par->info->screen_base;
|
|
int i, j, k;
|
|
|
|
array = ssd1307fb_alloc_array(par->width * par->height / 8,
|
|
SSD1307FB_DATA);
|
|
if (!array)
|
|
return;
|
|
|
|
/*
|
|
* The screen is divided in pages, each having a height of 8
|
|
* pixels, and the width of the screen. When sending a byte of
|
|
* data to the controller, it gives the 8 bits for the current
|
|
* column. I.e, the first byte are the 8 bits of the first
|
|
* column, then the 8 bits for the second column, etc.
|
|
*
|
|
*
|
|
* Representation of the screen, assuming it is 5 bits
|
|
* wide. Each letter-number combination is a bit that controls
|
|
* one pixel.
|
|
*
|
|
* A0 A1 A2 A3 A4
|
|
* B0 B1 B2 B3 B4
|
|
* C0 C1 C2 C3 C4
|
|
* D0 D1 D2 D3 D4
|
|
* E0 E1 E2 E3 E4
|
|
* F0 F1 F2 F3 F4
|
|
* G0 G1 G2 G3 G4
|
|
* H0 H1 H2 H3 H4
|
|
*
|
|
* If you want to update this screen, you need to send 5 bytes:
|
|
* (1) A0 B0 C0 D0 E0 F0 G0 H0
|
|
* (2) A1 B1 C1 D1 E1 F1 G1 H1
|
|
* (3) A2 B2 C2 D2 E2 F2 G2 H2
|
|
* (4) A3 B3 C3 D3 E3 F3 G3 H3
|
|
* (5) A4 B4 C4 D4 E4 F4 G4 H4
|
|
*/
|
|
|
|
for (i = 0; i < (par->height / 8); i++) {
|
|
for (j = 0; j < par->width; j++) {
|
|
u32 array_idx = i * par->width + j;
|
|
array->data[array_idx] = 0;
|
|
for (k = 0; k < 8; k++) {
|
|
u32 page_length = par->width * i;
|
|
u32 index = page_length + (par->width * k + j) / 8;
|
|
u8 byte = *(vmem + index);
|
|
u8 bit = byte & (1 << (j % 8));
|
|
bit = bit >> (j % 8);
|
|
array->data[array_idx] |= bit << k;
|
|
}
|
|
}
|
|
}
|
|
|
|
ssd1307fb_write_array(par->client, array, par->width * par->height / 8);
|
|
kfree(array);
|
|
}
|
|
|
|
|
|
static ssize_t ssd1307fb_write(struct fb_info *info, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct ssd1307fb_par *par = info->par;
|
|
unsigned long total_size;
|
|
unsigned long p = *ppos;
|
|
u8 __iomem *dst;
|
|
|
|
total_size = info->fix.smem_len;
|
|
|
|
if (p > total_size)
|
|
return -EINVAL;
|
|
|
|
if (count + p > total_size)
|
|
count = total_size - p;
|
|
|
|
if (!count)
|
|
return -EINVAL;
|
|
|
|
dst = (void __force *) (info->screen_base + p);
|
|
|
|
if (copy_from_user(dst, buf, count))
|
|
return -EFAULT;
|
|
|
|
ssd1307fb_update_display(par);
|
|
|
|
*ppos += count;
|
|
|
|
return count;
|
|
}
|
|
|
|
static int ssd1307fb_blank(int blank_mode, struct fb_info *info)
|
|
{
|
|
struct ssd1307fb_par *par = info->par;
|
|
|
|
if (blank_mode != FB_BLANK_UNBLANK)
|
|
return ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF);
|
|
else
|
|
return ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
|
|
}
|
|
|
|
static void ssd1307fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
|
|
{
|
|
struct ssd1307fb_par *par = info->par;
|
|
sys_fillrect(info, rect);
|
|
ssd1307fb_update_display(par);
|
|
}
|
|
|
|
static void ssd1307fb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
|
|
{
|
|
struct ssd1307fb_par *par = info->par;
|
|
sys_copyarea(info, area);
|
|
ssd1307fb_update_display(par);
|
|
}
|
|
|
|
static void ssd1307fb_imageblit(struct fb_info *info, const struct fb_image *image)
|
|
{
|
|
struct ssd1307fb_par *par = info->par;
|
|
sys_imageblit(info, image);
|
|
ssd1307fb_update_display(par);
|
|
}
|
|
|
|
static struct fb_ops ssd1307fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_read = fb_sys_read,
|
|
.fb_write = ssd1307fb_write,
|
|
.fb_blank = ssd1307fb_blank,
|
|
.fb_fillrect = ssd1307fb_fillrect,
|
|
.fb_copyarea = ssd1307fb_copyarea,
|
|
.fb_imageblit = ssd1307fb_imageblit,
|
|
};
|
|
|
|
static void ssd1307fb_deferred_io(struct fb_info *info,
|
|
struct list_head *pagelist)
|
|
{
|
|
ssd1307fb_update_display(info->par);
|
|
}
|
|
|
|
static int ssd1307fb_init(struct ssd1307fb_par *par)
|
|
{
|
|
int ret;
|
|
u32 precharge, dclk, com_invdir, compins;
|
|
struct pwm_args pargs;
|
|
|
|
if (par->device_info->need_pwm) {
|
|
par->pwm = pwm_get(&par->client->dev, NULL);
|
|
if (IS_ERR(par->pwm)) {
|
|
dev_err(&par->client->dev, "Could not get PWM from device tree!\n");
|
|
return PTR_ERR(par->pwm);
|
|
}
|
|
|
|
/*
|
|
* FIXME: pwm_apply_args() should be removed when switching to
|
|
* the atomic PWM API.
|
|
*/
|
|
pwm_apply_args(par->pwm);
|
|
|
|
pwm_get_args(par->pwm, &pargs);
|
|
|
|
par->pwm_period = pargs.period;
|
|
/* Enable the PWM */
|
|
pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period);
|
|
pwm_enable(par->pwm);
|
|
|
|
dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n",
|
|
par->pwm->pwm, par->pwm_period);
|
|
};
|
|
|
|
/* Set initial contrast */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client, par->contrast);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set segment re-map */
|
|
if (par->seg_remap) {
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
|
|
if (ret < 0)
|
|
return ret;
|
|
};
|
|
|
|
/* Set COM direction */
|
|
com_invdir = 0xc0 | (par->com_invdir & 0x1) << 3;
|
|
ret = ssd1307fb_write_cmd(par->client, com_invdir);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set multiplex ratio value */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client, par->height - 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set display offset value */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client, par->com_offset);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set clock frequency */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dclk = ((par->dclk_div - 1) & 0xf) | (par->dclk_frq & 0xf) << 4;
|
|
ret = ssd1307fb_write_cmd(par->client, dclk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set precharge period in number of ticks from the internal clock */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
precharge = (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4;
|
|
ret = ssd1307fb_write_cmd(par->client, precharge);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set COM pins configuration */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
compins = 0x02 | !(par->com_seq & 0x1) << 4
|
|
| (par->com_lrremap & 0x1) << 5;
|
|
ret = ssd1307fb_write_cmd(par->client, compins);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set VCOMH */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client, par->vcomh);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Turn on the DC-DC Charge Pump */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client,
|
|
BIT(4) | (par->device_info->need_chargepump ? BIT(2) : 0));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Switch to horizontal addressing mode */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client,
|
|
SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set column range */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client, 0x0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client, par->width - 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set page range */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client, 0x0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client,
|
|
par->page_offset + (par->height / 8) - 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Clear the screen */
|
|
ssd1307fb_update_display(par);
|
|
|
|
/* Turn on the display */
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ssd1307fb_update_bl(struct backlight_device *bdev)
|
|
{
|
|
struct ssd1307fb_par *par = bl_get_data(bdev);
|
|
int ret;
|
|
int brightness = bdev->props.brightness;
|
|
|
|
par->contrast = brightness;
|
|
|
|
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = ssd1307fb_write_cmd(par->client, par->contrast);
|
|
if (ret < 0)
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
static int ssd1307fb_get_brightness(struct backlight_device *bdev)
|
|
{
|
|
struct ssd1307fb_par *par = bl_get_data(bdev);
|
|
|
|
return par->contrast;
|
|
}
|
|
|
|
static int ssd1307fb_check_fb(struct backlight_device *bdev,
|
|
struct fb_info *info)
|
|
{
|
|
return (info->bl_dev == bdev);
|
|
}
|
|
|
|
static const struct backlight_ops ssd1307fb_bl_ops = {
|
|
.options = BL_CORE_SUSPENDRESUME,
|
|
.update_status = ssd1307fb_update_bl,
|
|
.get_brightness = ssd1307fb_get_brightness,
|
|
.check_fb = ssd1307fb_check_fb,
|
|
};
|
|
|
|
static struct ssd1307fb_deviceinfo ssd1307fb_ssd1305_deviceinfo = {
|
|
.default_vcomh = 0x34,
|
|
.default_dclk_div = 1,
|
|
.default_dclk_frq = 7,
|
|
};
|
|
|
|
static struct ssd1307fb_deviceinfo ssd1307fb_ssd1306_deviceinfo = {
|
|
.default_vcomh = 0x20,
|
|
.default_dclk_div = 1,
|
|
.default_dclk_frq = 8,
|
|
.need_chargepump = 1,
|
|
};
|
|
|
|
static struct ssd1307fb_deviceinfo ssd1307fb_ssd1307_deviceinfo = {
|
|
.default_vcomh = 0x20,
|
|
.default_dclk_div = 2,
|
|
.default_dclk_frq = 12,
|
|
.need_pwm = 1,
|
|
};
|
|
|
|
static struct ssd1307fb_deviceinfo ssd1307fb_ssd1309_deviceinfo = {
|
|
.default_vcomh = 0x34,
|
|
.default_dclk_div = 1,
|
|
.default_dclk_frq = 10,
|
|
};
|
|
|
|
static const struct of_device_id ssd1307fb_of_match[] = {
|
|
{
|
|
.compatible = "solomon,ssd1305fb-i2c",
|
|
.data = (void *)&ssd1307fb_ssd1305_deviceinfo,
|
|
},
|
|
{
|
|
.compatible = "solomon,ssd1306fb-i2c",
|
|
.data = (void *)&ssd1307fb_ssd1306_deviceinfo,
|
|
},
|
|
{
|
|
.compatible = "solomon,ssd1307fb-i2c",
|
|
.data = (void *)&ssd1307fb_ssd1307_deviceinfo,
|
|
},
|
|
{
|
|
.compatible = "solomon,ssd1309fb-i2c",
|
|
.data = (void *)&ssd1307fb_ssd1309_deviceinfo,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ssd1307fb_of_match);
|
|
|
|
static int ssd1307fb_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct backlight_device *bl;
|
|
char bl_name[12];
|
|
struct fb_info *info;
|
|
struct device_node *node = client->dev.of_node;
|
|
struct fb_deferred_io *ssd1307fb_defio;
|
|
u32 vmem_size;
|
|
struct ssd1307fb_par *par;
|
|
u8 *vmem;
|
|
int ret;
|
|
|
|
if (!node) {
|
|
dev_err(&client->dev, "No device tree data found!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
info = framebuffer_alloc(sizeof(struct ssd1307fb_par), &client->dev);
|
|
if (!info) {
|
|
dev_err(&client->dev, "Couldn't allocate framebuffer.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
par = info->par;
|
|
par->info = info;
|
|
par->client = client;
|
|
|
|
par->device_info = of_device_get_match_data(&client->dev);
|
|
|
|
par->reset = devm_gpiod_get_optional(&client->dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(par->reset)) {
|
|
dev_err(&client->dev, "failed to get reset gpio: %ld\n",
|
|
PTR_ERR(par->reset));
|
|
ret = PTR_ERR(par->reset);
|
|
goto fb_alloc_error;
|
|
}
|
|
|
|
par->vbat_reg = devm_regulator_get_optional(&client->dev, "vbat");
|
|
if (IS_ERR(par->vbat_reg)) {
|
|
ret = PTR_ERR(par->vbat_reg);
|
|
if (ret == -ENODEV) {
|
|
par->vbat_reg = NULL;
|
|
} else {
|
|
dev_err(&client->dev, "failed to get VBAT regulator: %d\n",
|
|
ret);
|
|
goto fb_alloc_error;
|
|
}
|
|
}
|
|
|
|
if (of_property_read_u32(node, "solomon,width", &par->width))
|
|
par->width = 96;
|
|
|
|
if (of_property_read_u32(node, "solomon,height", &par->height))
|
|
par->height = 16;
|
|
|
|
if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset))
|
|
par->page_offset = 1;
|
|
|
|
if (of_property_read_u32(node, "solomon,com-offset", &par->com_offset))
|
|
par->com_offset = 0;
|
|
|
|
if (of_property_read_u32(node, "solomon,prechargep1", &par->prechargep1))
|
|
par->prechargep1 = 2;
|
|
|
|
if (of_property_read_u32(node, "solomon,prechargep2", &par->prechargep2))
|
|
par->prechargep2 = 2;
|
|
|
|
par->seg_remap = !of_property_read_bool(node, "solomon,segment-no-remap");
|
|
par->com_seq = of_property_read_bool(node, "solomon,com-seq");
|
|
par->com_lrremap = of_property_read_bool(node, "solomon,com-lrremap");
|
|
par->com_invdir = of_property_read_bool(node, "solomon,com-invdir");
|
|
|
|
par->contrast = 127;
|
|
par->vcomh = par->device_info->default_vcomh;
|
|
|
|
/* Setup display timing */
|
|
par->dclk_div = par->device_info->default_dclk_div;
|
|
par->dclk_frq = par->device_info->default_dclk_frq;
|
|
|
|
vmem_size = par->width * par->height / 8;
|
|
|
|
vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
|
|
get_order(vmem_size));
|
|
if (!vmem) {
|
|
dev_err(&client->dev, "Couldn't allocate graphical memory.\n");
|
|
ret = -ENOMEM;
|
|
goto fb_alloc_error;
|
|
}
|
|
|
|
ssd1307fb_defio = devm_kzalloc(&client->dev, sizeof(struct fb_deferred_io), GFP_KERNEL);
|
|
if (!ssd1307fb_defio) {
|
|
dev_err(&client->dev, "Couldn't allocate deferred io.\n");
|
|
ret = -ENOMEM;
|
|
goto fb_alloc_error;
|
|
}
|
|
|
|
ssd1307fb_defio->delay = HZ / refreshrate;
|
|
ssd1307fb_defio->deferred_io = ssd1307fb_deferred_io;
|
|
|
|
info->fbops = &ssd1307fb_ops;
|
|
info->fix = ssd1307fb_fix;
|
|
info->fix.line_length = par->width / 8;
|
|
info->fbdefio = ssd1307fb_defio;
|
|
|
|
info->var = ssd1307fb_var;
|
|
info->var.xres = par->width;
|
|
info->var.xres_virtual = par->width;
|
|
info->var.yres = par->height;
|
|
info->var.yres_virtual = par->height;
|
|
|
|
info->var.red.length = 1;
|
|
info->var.red.offset = 0;
|
|
info->var.green.length = 1;
|
|
info->var.green.offset = 0;
|
|
info->var.blue.length = 1;
|
|
info->var.blue.offset = 0;
|
|
|
|
info->screen_base = (u8 __force __iomem *)vmem;
|
|
info->fix.smem_start = __pa(vmem);
|
|
info->fix.smem_len = vmem_size;
|
|
|
|
fb_deferred_io_init(info);
|
|
|
|
i2c_set_clientdata(client, info);
|
|
|
|
if (par->reset) {
|
|
/* Reset the screen */
|
|
gpiod_set_value(par->reset, 0);
|
|
udelay(4);
|
|
gpiod_set_value(par->reset, 1);
|
|
udelay(4);
|
|
}
|
|
|
|
if (par->vbat_reg) {
|
|
ret = regulator_enable(par->vbat_reg);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to enable VBAT: %d\n",
|
|
ret);
|
|
goto reset_oled_error;
|
|
}
|
|
}
|
|
|
|
ret = ssd1307fb_init(par);
|
|
if (ret)
|
|
goto regulator_enable_error;
|
|
|
|
ret = register_framebuffer(info);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Couldn't register the framebuffer\n");
|
|
goto panel_init_error;
|
|
}
|
|
|
|
snprintf(bl_name, sizeof(bl_name), "ssd1307fb%d", info->node);
|
|
bl = backlight_device_register(bl_name, &client->dev, par,
|
|
&ssd1307fb_bl_ops, NULL);
|
|
if (IS_ERR(bl)) {
|
|
ret = PTR_ERR(bl);
|
|
dev_err(&client->dev, "unable to register backlight device: %d\n",
|
|
ret);
|
|
goto bl_init_error;
|
|
}
|
|
|
|
bl->props.brightness = par->contrast;
|
|
bl->props.max_brightness = MAX_CONTRAST;
|
|
info->bl_dev = bl;
|
|
|
|
dev_info(&client->dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
|
|
|
|
return 0;
|
|
|
|
bl_init_error:
|
|
unregister_framebuffer(info);
|
|
panel_init_error:
|
|
if (par->device_info->need_pwm) {
|
|
pwm_disable(par->pwm);
|
|
pwm_put(par->pwm);
|
|
};
|
|
regulator_enable_error:
|
|
if (par->vbat_reg)
|
|
regulator_disable(par->vbat_reg);
|
|
reset_oled_error:
|
|
fb_deferred_io_cleanup(info);
|
|
fb_alloc_error:
|
|
framebuffer_release(info);
|
|
return ret;
|
|
}
|
|
|
|
static int ssd1307fb_remove(struct i2c_client *client)
|
|
{
|
|
struct fb_info *info = i2c_get_clientdata(client);
|
|
struct ssd1307fb_par *par = info->par;
|
|
|
|
ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF);
|
|
|
|
backlight_device_unregister(info->bl_dev);
|
|
|
|
unregister_framebuffer(info);
|
|
if (par->device_info->need_pwm) {
|
|
pwm_disable(par->pwm);
|
|
pwm_put(par->pwm);
|
|
};
|
|
fb_deferred_io_cleanup(info);
|
|
__free_pages(__va(info->fix.smem_start), get_order(info->fix.smem_len));
|
|
framebuffer_release(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id ssd1307fb_i2c_id[] = {
|
|
{ "ssd1305fb", 0 },
|
|
{ "ssd1306fb", 0 },
|
|
{ "ssd1307fb", 0 },
|
|
{ "ssd1309fb", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ssd1307fb_i2c_id);
|
|
|
|
static struct i2c_driver ssd1307fb_driver = {
|
|
.probe = ssd1307fb_probe,
|
|
.remove = ssd1307fb_remove,
|
|
.id_table = ssd1307fb_i2c_id,
|
|
.driver = {
|
|
.name = "ssd1307fb",
|
|
.of_match_table = ssd1307fb_of_match,
|
|
},
|
|
};
|
|
|
|
module_i2c_driver(ssd1307fb_driver);
|
|
|
|
MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controller");
|
|
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
|
|
MODULE_LICENSE("GPL");
|