mirror of https://gitee.com/openkylin/linux.git
99cc7ad46b
Pull i2c updates from Wolfram Sang:
- the core has now a lockless variant of i2c_smbus_xfer. Some open
coded versions of this got removed in drivers. This also enables
proper SCCB support in regmap.
- locking got a more precise naming. i2c_{un}lock_adapter() had to go,
and we know use i2c_lock_bus() consistently with flags like
I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity.
- the gpio fault injector got a new delicate testcase
- the bus recovery procedure got fixed to handle the new testcase
correctly
- a new quirk flag for controllers not able to handle zero length
messages together with driver updates to use it
- new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl
family S900
- and a good set of driver improvements and bugfixes
* 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
i2c: rcar: implement STOP and REP_START according to docs
i2c: rcar: refactor private flags
i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value
i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes
dt-bindings: i2c: rcar: Add r8a774a1 support
dt-bindings: i2c: sh_mobile: Add r8a774a1 support
i2c: imx: Simplify stopped state tracking
i2c: imx: Fix race condition in dma read
i2c: pasemi: remove hardcoded bus numbers on smbus
i2c: designware: Add SPDX license tag
i2c: designware: Convert to use struct i2c_timings
i2c: core: Parse SDA hold time from firmware
i2c: designware-pcidrv: Mark expected switch fall-through
i2c: amd8111: Mark expected switch fall-through
i2c: sh_mobile: use core to detect 'no zero length read' quirk
i2c: xlr: use core to detect 'no zero length' quirk
i2c: rcar: use core to detect 'no zero length' quirk
i2c: stu300: use core to detect 'no zero length' quirk
i2c: pmcmsp: use core to detect 'no zero length' quirk
i2c: mxs: use core to detect 'no zero length' quirk
...
|
||
|---|---|---|
| .. | ||
| altera-stapl | ||
| c2port | ||
| cardreader | ||
| cb710 | ||
| cxl | ||
| echo | ||
| eeprom | ||
| genwqe | ||
| ibmasm | ||
| lis3lv02d | ||
| lkdtm | ||
| mei | ||
| mic | ||
| ocxl | ||
| sgi-gru | ||
| sgi-xp | ||
| ti-st | ||
| vmw_vmci | ||
| Kconfig | ||
| Makefile | ||
| ad525x_dpot-i2c.c | ||
| ad525x_dpot-spi.c | ||
| ad525x_dpot.c | ||
| ad525x_dpot.h | ||
| apds990x.c | ||
| apds9802als.c | ||
| aspeed-lpc-ctrl.c | ||
| aspeed-lpc-snoop.c | ||
| atmel-ssc.c | ||
| atmel_tclib.c | ||
| bh1770glc.c | ||
| cs5535-mfgpt.c | ||
| ds1682.c | ||
| dummy-irq.c | ||
| enclosure.c | ||
| fsa9480.c | ||
| hmc6352.c | ||
| hpilo.c | ||
| hpilo.h | ||
| ibmvmc.c | ||
| ibmvmc.h | ||
| ics932s401.c | ||
| ioc4.c | ||
| isl29003.c | ||
| isl29020.c | ||
| kgdbts.c | ||
| lattice-ecp3-config.c | ||
| pch_phub.c | ||
| pci_endpoint_test.c | ||
| phantom.c | ||
| pti.c | ||
| qcom-coincell.c | ||
| spear13xx_pcie_gadget.c | ||
| sram-exec.c | ||
| sram.c | ||
| sram.h | ||
| tifm_7xx1.c | ||
| tifm_core.c | ||
| tsl2550.c | ||
| vexpress-syscfg.c | ||
| vmw_balloon.c | ||