linux/drivers/net/wireless/ti/wl18xx/conf.h

93 lines
2.6 KiB
C

/*
* This file is part of wl18xx
*
* Copyright (C) 2011 Texas Instruments Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __WL18XX_CONF_H__
#define __WL18XX_CONF_H__
#define WL18XX_CONF_MAGIC 0x10e100ca
#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0002)
#define WL18XX_CONF_MASK 0x0000ffff
#define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \
sizeof(struct wl18xx_priv_conf))
#define NUM_OF_CHANNELS_11_ABG 150
#define NUM_OF_CHANNELS_11_P 7
#define WL18XX_NUM_OF_SUB_BANDS 9
#define SRF_TABLE_LEN 16
#define PIN_MUXING_SIZE 2
struct wl18xx_mac_and_phy_params {
u8 phy_standalone;
u8 rdl;
u8 enable_clpc;
u8 enable_tx_low_pwr_on_siso_rdl;
u8 auto_detect;
u8 dedicated_fem;
u8 low_band_component;
/* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
u8 low_band_component_type;
u8 high_band_component;
/* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
u8 high_band_component_type;
u8 number_of_assembled_ant2_4;
u8 number_of_assembled_ant5;
u8 pin_muxing_platform_options[PIN_MUXING_SIZE];
u8 external_pa_dc2dc;
u8 tcxo_ldo_voltage;
u8 xtal_itrim_val;
u8 srf_state;
u8 srf1[SRF_TABLE_LEN];
u8 srf2[SRF_TABLE_LEN];
u8 srf3[SRF_TABLE_LEN];
u8 io_configuration;
u8 sdio_configuration;
u8 settings;
u8 rx_profile;
u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG];
u8 pwr_limit_reference_11_abg;
u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
u8 pwr_limit_reference_11p;
u8 per_sub_band_tx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
u8 per_sub_band_rx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
u8 primary_clock_setting_time;
u8 clock_valid_on_wake_up;
u8 secondary_clock_setting_time;
u8 board_type;
/* enable point saturation */
u8 psat;
/* low/medium/high Tx power in dBm */
s8 low_power_val;
s8 med_power_val;
s8 high_power_val;
u8 padding[1];
} __packed;
struct wl18xx_priv_conf {
/* this structure is copied wholesale to FW */
struct wl18xx_mac_and_phy_params phy;
} __packed;
#endif /* __WL18XX_CONF_H__ */