linux/drivers/iio
Greg Kroah-Hartman 1dcc3ed4a7 First set of new device support, features and cleanup for IIO in the 5.1 cycle
A number of interesting new devices supported plus a good set of staging
 cleanup including one graduation and one drop.
 
 New device support
 * ad56886
   - Add support for AD5674R/AD5679R with some minor driver changes to support
     more channels.
 * ad7768
   - New driver and dt bindings for this 24 bit ADC.
 * max44009
   - New driver and dt bindings for this ambient light sensor.
 * mpu6050
   - Support the ICM 20602 IMU. Minor tweaks due to slightly different
     register map.
 * NPCM adc
   - New driver and dt bindings for this BMC ADC.
 * Sensiron SGP30
   - Modifiers for ethanol and H2.
   - New driver and dt bindings.
   - Follow patch added self cleaning support.
 * Sensiron SPS30
   - New channel type for mass concentration.
   - New driver and bindings.
   - Minor tidy up patch followed (drop fmt specifier as unused)
 * st_pressure
   - lps22hh support. ID plus information structures and dt bindings.
 * ti-ads124s08
   - Add binding doc and driver.
 
 Staging graduations
 * ad7606 driver and bindings.
 
 Staging drops
 * ad7152 CDC driver dropped.  This part is near EoL and no one is known
   to be using it.  If anyone surfaces obviously we can bring the driver
   back.  If not, good to drop it to avoid wasting anyone's time cleaning
   it up.
 
 New features
 * bme680
   - DT support and bindings doc.
 * isl29018
   - Add regulator for VCC.
 * mag3110
   - Add regulators for supplies.
 * meson-saradc
   - Support the temperature sensors of more SoCs.
 * mma8452
   - Add regulators for power suplies and binding docs to reflect them.
 * st-accel
   - Support the undocumented but it seems fairly common _ONT ACPI method
     to specify orientation of the sensor.
 
 Cleanup, minor fixes and fixes for staging driver that have been broken a
 long time
 * ad5933
   - Drop platform data alternative to specifying the reference voltage
     using a regulator.
   - Use the clock framework to contorl the reference clock.
   - Add a DT binding doc to cover the defacto binding.
 * ad7280a
   - Split up some big functions to improve readability.
 * ad7606
   - Allow for timeout if interrupt never occurs.
   - Use devm functions to simplify probe and remove.
   - Use the find_closest macro to avoid need for precise values from
     userspace.
   - Add missing vendor prefixes for various DT properties. Note the
     driver is in staging still and there are no known devicetrees.
   - Add explict OF device ID table.
   - Simplify the Kconfig choices
   - Change to a threaded IRQ.
   - SPDX and simple stype fixes.
 * ad7816
   - Drop unnecessary variable init.
 * ad9523
   - Check a return value that was ignored.
 * ad9833
   - Drop platform data.  It was just setting most values to the hardware
     defaults.
   - Use the clock framework to provide the input clock.
 * adt7316 (lots of staging cleanup)
   - Fix some wrong register / bit definitions
   - Invert the logic of the check for an ldac pin so it actually makes sense.
   - Read the right register to get internal vref settings
   - Allow adt751x chips to use the internal vref for all DAC channels rather
     than a subset.
   - Remove dac vref bypass control from parts that don't have one.
   - Make the store DAC update mode function consistent with the show one.
   - Fix some spellings and other minor tidy up.
   - Avoid passing irq numbers around by putting all the irq logic in
     one place.
   - Fix an issue with the resolution of DAC control.
   - Fix support of the high resolution DAC mode (for temp proportional output)
     where supported.
   - Fix DAC read and write calculations.
 * st_lsm6dsx
   - Drop an unused variable (set but not read)
 * xilinx-xadc
   - Check an unhandled return value.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlxXWXwRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogtPhAAtGoXJl9gwBywQXjykFBiN5PxBxKypq58
 El7EQY7I0P/RkIVEBHgIc9p85lREVkIZQEcQZqsO5LI63cumCGtODyJg2CAF6+oz
 EIO0GCZFvb2zLiTyPg2NSuBhsYxiLtyHfu5MGPivbDyzVKZzf8LLjwQxkHYPaLzb
 Qa9D3wigoGHuvXpC9ULGQT36kMj6XPN9JGQsCRtbUQVgPu2XOPiuLv98vEpyaCPj
 1C7D72LAEq1Z5A3rA17KpT576Yy1JGv1LkSz48xEtHlDoB2IgCkoZfx6ThTr1ehX
 eWav1NsD1IpbWKiSY19rSmjSkkbYk1WHyV+tTeTguFb6nfIA/y22kl9td8Rqjk2P
 L/O1tRHdXO8G+gtCfBhUdVmT1SQq/vkow2UBH59CllN81bsWxFEudE4VHJCBlmjr
 sgMKdb3d0aYekRis/bNQJMvT0nY2x+g2k+ey+kEnrYOZVjCx+EeNNS249CnUnFId
 ZZNGqJ2j0xK9BULqffcupCoERLIhf/9nlx5JO3n5YA5X3pdns+yzVkS/9oXpN7EK
 9A41pU9zVWYN8B21MqfN0EPG41nkY36TOuTvL2/4/U2DfAD6VIf4vEYimrkTjsU0
 n7vKqQL8DRicWDsbxP8h6u/nG0u+ZgOgY4SVzth0aT3/plCAwhWmoQpnkjVFKMBD
 HBQB0HlEg2M=
 =M03w
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanup for IIO in the 5.1 cycle

A number of interesting new devices supported plus a good set of staging
cleanup including one graduation and one drop.

New device support
* ad56886
  - Add support for AD5674R/AD5679R with some minor driver changes to support
    more channels.
* ad7768
  - New driver and dt bindings for this 24 bit ADC.
* max44009
  - New driver and dt bindings for this ambient light sensor.
* mpu6050
  - Support the ICM 20602 IMU. Minor tweaks due to slightly different
    register map.
* NPCM adc
  - New driver and dt bindings for this BMC ADC.
* Sensiron SGP30
  - Modifiers for ethanol and H2.
  - New driver and dt bindings.
  - Follow patch added self cleaning support.
* Sensiron SPS30
  - New channel type for mass concentration.
  - New driver and bindings.
  - Minor tidy up patch followed (drop fmt specifier as unused)
* st_pressure
  - lps22hh support. ID plus information structures and dt bindings.
* ti-ads124s08
  - Add binding doc and driver.

Staging graduations
* ad7606 driver and bindings.

Staging drops
* ad7152 CDC driver dropped.  This part is near EoL and no one is known
  to be using it.  If anyone surfaces obviously we can bring the driver
  back.  If not, good to drop it to avoid wasting anyone's time cleaning
  it up.

New features
* bme680
  - DT support and bindings doc.
* isl29018
  - Add regulator for VCC.
* mag3110
  - Add regulators for supplies.
* meson-saradc
  - Support the temperature sensors of more SoCs.
* mma8452
  - Add regulators for power suplies and binding docs to reflect them.
* st-accel
  - Support the undocumented but it seems fairly common _ONT ACPI method
    to specify orientation of the sensor.

Cleanup, minor fixes and fixes for staging driver that have been broken a
long time
* ad5933
  - Drop platform data alternative to specifying the reference voltage
    using a regulator.
  - Use the clock framework to contorl the reference clock.
  - Add a DT binding doc to cover the defacto binding.
* ad7280a
  - Split up some big functions to improve readability.
* ad7606
  - Allow for timeout if interrupt never occurs.
  - Use devm functions to simplify probe and remove.
  - Use the find_closest macro to avoid need for precise values from
    userspace.
  - Add missing vendor prefixes for various DT properties. Note the
    driver is in staging still and there are no known devicetrees.
  - Add explict OF device ID table.
  - Simplify the Kconfig choices
  - Change to a threaded IRQ.
  - SPDX and simple stype fixes.
* ad7816
  - Drop unnecessary variable init.
* ad9523
  - Check a return value that was ignored.
* ad9833
  - Drop platform data.  It was just setting most values to the hardware
    defaults.
  - Use the clock framework to provide the input clock.
* adt7316 (lots of staging cleanup)
  - Fix some wrong register / bit definitions
  - Invert the logic of the check for an ldac pin so it actually makes sense.
  - Read the right register to get internal vref settings
  - Allow adt751x chips to use the internal vref for all DAC channels rather
    than a subset.
  - Remove dac vref bypass control from parts that don't have one.
  - Make the store DAC update mode function consistent with the show one.
  - Fix some spellings and other minor tidy up.
  - Avoid passing irq numbers around by putting all the irq logic in
    one place.
  - Fix an issue with the resolution of DAC control.
  - Fix support of the high resolution DAC mode (for temp proportional output)
    where supported.
  - Fix DAC read and write calculations.
* st_lsm6dsx
  - Drop an unused variable (set but not read)
* xilinx-xadc
  - Check an unhandled return value.

* tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (67 commits)
  iio: chemical: sps30: remove printk format specifier
  staging: iio: frequency: ad9833: Load clock using clock framework
  staging: iio: frequency: ad9833: Get frequency value statically
  dt-bindings: iio: light: Add max44009
  iio: light: add driver for MAX44009
  dt-bindings: iio: adc: Add docs for AD7768-1
  iio: adc: Add AD7768-1 ADC basic support
  staging: iio: cdc: ad7152: remove driver completely
  iio: imu: mpu6050: Add support for the ICM 20602 IMU
  dt-bindings: iio: imu: add icm20602 bindings to mpu6050
  dt-bindings: iio: pressure: add LPS22HH bindings
  iio: st_accel: use ACPI orientation data
  iio: adc: add NPCM ADC driver
  dt-binding: iio: add NPCM ADC documentation
  iio: chemical: sps30: allow changing self cleaning period
  dt-bindings: iio: chemical: Add bindings for bme680
  iio: chemical: bme680: Add device-tree support
  iio:st_pressure:initial lps22hh sensor support
  iio: accell: mma8452: add vdd/vddio regulator operation support
  dt-bindings: iio: accel: mma8452: add power supplies property
  ...
2019-02-04 07:06:36 +01:00
..
accel iio: st_accel: use ACPI orientation data 2019-02-02 09:28:51 +00:00
adc First set of new device support, features and cleanup for IIO in the 5.1 cycle 2019-02-04 07:06:36 +01:00
afe iio: afe: rescale: new driver 2018-04-28 18:03:22 +01:00
amplifiers drivers: iio: Update MODULE AUTHOR email address 2018-08-19 17:23:39 +01:00
buffer iio:kfifo_buf: check for uint overflow 2018-03-30 11:16:12 +01:00
chemical iio: chemical: sps30: remove printk format specifier 2019-02-02 17:08:06 +00:00
common iio: hid-sensor-hub: clean up indentation, remove extraneous tab 2018-11-25 14:03:59 +00:00
counter iio: 104-quad-8: Provide defines for magic numbers 2018-06-10 11:52:30 +01:00
dac iio: dac: ad5686: Add support for AD5674R/AD5679R 2019-01-12 18:58:21 +00:00
dummy iio:dummy: Add extra paragraphs on Kconfig 2018-03-03 15:20:16 +00:00
frequency iio: ad9523: fix a missing check of return value 2019-01-05 16:10:50 +00:00
gyro iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers 2018-11-16 11:42:12 +00:00
health iio: health: max30102: Mark expected switch fall-throughs 2018-08-19 17:21:35 +01:00
humidity iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers 2018-11-16 11:42:12 +00:00
imu First set of new device support, features and cleanup for IIO in the 5.1 cycle 2019-02-04 07:06:36 +01:00
light iio: light: add driver for MAX44009 2019-02-02 15:47:46 +00:00
magnetometer iio: magnetometer: mag3110: add vdd/vddio regulator operation support 2019-01-12 19:00:23 +00:00
multiplexer iio: multiplexer: switch to SPDX license identifier 2018-08-20 19:28:26 +01:00
orientation iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers 2018-11-16 11:42:12 +00:00
potentiometer iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx 2018-11-25 12:35:26 +00:00
potentiostat iio: potentiostat: lmp91000: add LMP91002 support 2018-05-12 11:02:44 +01:00
pressure iio:st_pressure:initial lps22hh sensor support 2019-01-19 17:32:41 +00:00
proximity iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor. 2018-09-22 16:42:56 +01:00
resolver staging:iio:ad2s90: Move out of staging 2018-12-01 15:40:39 +00:00
temperature iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers 2018-11-16 11:42:12 +00:00
trigger drivers: iio: Update MODULE AUTHOR email address 2018-08-19 17:23:39 +01:00
Kconfig staging: iio: ad2s1200: Move driver out of staging 2018-05-20 12:17:48 +01:00
Makefile staging: iio: ad2s1200: Move driver out of staging 2018-05-20 12:17:48 +01:00
iio_core.h the rest of drivers/*: annotate ->poll() instances 2017-11-28 11:06:58 -05:00
iio_core_trigger.h
industrialio-buffer.c First round of IIO fixes for the 4.16 cycle. 2018-02-20 10:03:22 +01:00
industrialio-configfs.c iio: make function argument and some structures const 2017-10-19 16:15:24 +02:00
industrialio-core.c iio: add IIO_MASSCONCENTRATION channel type 2018-12-16 14:05:57 +00:00
industrialio-event.c vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
industrialio-sw-device.c iio: make function argument and some structures const 2017-10-19 16:15:24 +02:00
industrialio-sw-trigger.c iio: make function argument and some structures const 2017-10-19 16:15:24 +02:00
industrialio-trigger.c iio:trigger: Remove necessity to have a trig->ops structure. 2017-08-22 21:20:28 +01:00
industrialio-triggered-event.c
inkern.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00