mirror of https://gitee.com/openkylin/linux.git
1718 lines
79 KiB
Plaintext
1718 lines
79 KiB
Plaintext
What: /sys/bus/iio/devices/iio:deviceX
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware chip or device accessed by one communication port.
|
|
Corresponds to a grouping of sensor channels. X is the IIO
|
|
index of the device.
|
|
|
|
What: /sys/bus/iio/devices/triggerX
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
An event driven driver of data capture to an in kernel buffer.
|
|
May be provided by a device driver that also has an IIO device
|
|
based on hardware generated events (e.g. data ready) or
|
|
provided by a separate driver for other hardware (e.g.
|
|
periodic timer, GPIO or high resolution timer).
|
|
Contains trigger type specific elements. These do not
|
|
generalize well and hence are not documented in this file.
|
|
X is the IIO index of the trigger.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Directory of attributes relating to the buffer for the device.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/name
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Description of the physical chip / device for device X.
|
|
Typically a part number.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/current_timestamp_clock
|
|
KernelVersion: 4.5
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
String identifying current posix clock used to timestamp
|
|
buffered samples and events for device X.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
|
|
What: /sys/bus/iio/devices/triggerX/sampling_frequency
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Some devices have internal clocks. This parameter sets the
|
|
resulting sampling frequency. In many devices this
|
|
parameter has an effect on input filters etc. rather than
|
|
simply controlling when the input is sampled. As this
|
|
effects data ready triggers, hardware buffers and the sysfs
|
|
direct access interfaces, it may be found in any of the
|
|
relevant directories. If it effects all of the above
|
|
then it is to be found in the base device directory.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
|
|
What: /sys/.../iio:deviceX/buffer/sampling_frequency_available
|
|
What: /sys/bus/iio/devices/triggerX/sampling_frequency_available
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
When the internal sampling clock can only take a specific set of
|
|
frequencies, we can specify the available values with:
|
|
- a small discrete set of values like "0 2 4 6 8"
|
|
- a range with minimum, step and maximum frequencies like
|
|
"[min step max]"
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio
|
|
KernelVersion: 2.6.38
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware dependent ADC oversampling. Controls the sampling ratio
|
|
of the digital filter if available.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available
|
|
KernelVersion: 2.6.38
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware dependent values supported by the oversampling filter.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_raw
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled no bias removal etc.) voltage measurement from
|
|
channel Y. In special cases where the channel does not
|
|
correspond to externally available input one of the named
|
|
versions may be used. The number must always be specified and
|
|
unique to allow association with event codes. Units after
|
|
application of scale and offset are millivolts.
|
|
|
|
Channels with 'i' and 'q' modifiers always exist in pairs and both
|
|
channels refer to the same signal. The 'i' channel contains the in-phase
|
|
component of the signal while the 'q' channel contains the quadrature
|
|
component.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled) differential voltage measurement equivalent to
|
|
channel Y - channel Z where these channel numbers apply to the
|
|
physically equivalent inputs when non differential readings are
|
|
separately available. In differential only parts, then all that
|
|
is required is a consistent labeling. Units after application
|
|
of scale and offset are millivolts.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw
|
|
KernelVersion: 3.17
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled no bias removal etc.) current measurement from
|
|
channel Y. In special cases where the channel does not
|
|
correspond to externally available input one of the named
|
|
versions may be used. The number must always be specified and
|
|
unique to allow association with event codes. Units after
|
|
application of scale and offset are milliamps.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_powerY_raw
|
|
KernelVersion: 4.5
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled no bias removal etc.) power measurement from
|
|
channel Y. The number must always be specified and
|
|
unique to allow association with event codes. Units after
|
|
application of scale and offset are milliwatts.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
|
|
KernelVersion: 3.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw capacitance measurement from channel Y. Units after
|
|
application of scale and offset are nanofarads.
|
|
|
|
What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
|
|
KernelVersion: 3.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw differential capacitance measurement equivalent to
|
|
channel Y - channel Z where these channel numbers apply to the
|
|
physically equivalent inputs when non differential readings are
|
|
separately available. In differential only parts, then all that
|
|
is required is a consistent labeling. Units after application
|
|
of scale and offset are nanofarads.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_temp_ambient_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_raw
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled no bias removal etc.) temperature measurement.
|
|
If an axis is specified it generally means that the temperature
|
|
sensor is associated with one part of a compound device (e.g.
|
|
a gyroscope axis). The ambient and object modifiers distinguish
|
|
between ambient (reference) and distant temperature for contact-
|
|
less measurements. Units after application of scale and offset
|
|
are milli degrees Celsius.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input
|
|
KernelVersion: 2.6.38
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Scaled temperature measurement in milli degrees Celsius.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Acceleration in direction x, y or z (may be arbitrarily assigned
|
|
but should match other such assignments on device).
|
|
Has all of the equivalent parameters as per voltageY. Units
|
|
after application of scale and offset are m/s^2.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
|
|
KernelVersion: 4.11
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Gravity in direction x, y or z (may be arbitrarily assigned
|
|
but should match other such assignments on device).
|
|
Units after application of scale and offset are m/s^2.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw
|
|
KernelVersion: 4.17
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Angle of rotation. Units after application of scale and offset
|
|
are radians.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw
|
|
KernelVersion: 4.19
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Relative position in direction x or y on a pad (may be
|
|
arbitrarily assigned but should match other such assignments on
|
|
device).
|
|
Units after application of scale and offset are milli percents
|
|
from the pad's size in both directions. Should be calibrated by
|
|
the consumer.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Angular velocity about axis x, y or z (may be arbitrarily
|
|
assigned). Has all the equivalent parameters as per voltageY.
|
|
Units after application of scale and offset are radians per
|
|
second.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Inclination raw reading about axis x, y or z (may be
|
|
arbitrarily assigned). Data converted by application of offset
|
|
and scale to degrees.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Magnetic field along axis x, y or z (may be arbitrarily
|
|
assigned). Data converted by application of offset
|
|
then scale to Gauss.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw
|
|
KernelVersion: 2.6.36
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Highest value since some reset condition. These
|
|
attributes allow access to this and are otherwise
|
|
the direct equivalent of the <type>Y[_name]_raw attributes.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw
|
|
KernelVersion: 2.6.36
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
A computed peak value based on the sum squared magnitude of
|
|
the underlying value in the specified directions.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw
|
|
KernelVersion: 3.8
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw pressure measurement from channel Y. Units after
|
|
application of scale and offset are kilopascal.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input
|
|
KernelVersion: 3.8
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Scaled pressure measurement from channel Y, in kilopascal.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw
|
|
KernelVersion: 3.14
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw humidity measurement of air. Units after application of
|
|
scale and offset are milli percent.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input
|
|
KernelVersion: 3.14
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Scaled humidity measurement in milli percent.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_X_mean_raw
|
|
KernelVersion: 3.5
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Averaged raw measurement from channel X. The number of values
|
|
used for averaging is device specific. The converting rules for
|
|
normal raw values also applies to the averaged raw values.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_current_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_current_q_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_current_i_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_rot_offset
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_angl_offset
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
If known for a device, offset to be added to <type>[Y]_raw prior
|
|
to scaling by <type>[Y]_scale in order to obtain value in the
|
|
<type> units as specified in <type>[Y]_raw documentation.
|
|
Not present if the offset is always 0 or unknown. If Y or
|
|
axis <x|y|z> is not present, then the offset applies to all
|
|
in channels of <type>.
|
|
May be writable if a variable offset can be applied on the
|
|
device. Note that this is different to calibbias which
|
|
is for devices (or drivers) that apply offsets to compensate
|
|
for variation between different instances of the part, typically
|
|
adjusted by using some hardware supported calibration procedure.
|
|
Calibbias is applied internally, offset is applied in userspace
|
|
to the _raw output.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_current_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_current_i_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_current_q_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_energy_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_distance_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
If known for a device, scale to be applied to <type>Y[_name]_raw
|
|
post addition of <type>[Y][_name]_offset in order to obtain the
|
|
measured value in <type> units as specified in
|
|
<type>[Y][_name]_raw documentation. If shared across all in
|
|
channels then Y and <x|y|z> are not present and the value is
|
|
called <type>[Y][_name]_scale. The peak modifier means this
|
|
value is applied to <type>Y[_name]_peak_raw values.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware applied calibration offset (assumed to fix production
|
|
inaccuracies).
|
|
|
|
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
|
|
What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
|
|
what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
|
|
what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware applied calibration scale factor (assumed to fix
|
|
production inaccuracies). If shared across all channels,
|
|
<type>_calibscale is used.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender
|
|
KernelVersion: 4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Gender of the user (e.g.: male, female) used by some pedometers
|
|
to compute the stride length, distance, speed and activity
|
|
type.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender_available
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender_available
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender_available
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender_available
|
|
KernelVersion: 4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Lists all available gender values (e.g.: male, female).
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibheight
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibheight
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibheight
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibheight
|
|
KernelVersion: 3.19
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Height of the user (in meters) used by some pedometers
|
|
to compute the stride length, distance, speed and activity
|
|
type.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibweight
|
|
KernelVersion: 4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Weight of the user (in kg). It is needed by some pedometers
|
|
to compute the calories burnt by the user.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
|
|
What: /sys/.../iio:deviceX/in_anglvel_scale_available
|
|
What: /sys/.../iio:deviceX/in_magn_scale_available
|
|
What: /sys/.../iio:deviceX/in_illuminance_scale_available
|
|
What: /sys/.../iio:deviceX/in_intensity_scale_available
|
|
What: /sys/.../iio:deviceX/in_proximity_scale_available
|
|
What: /sys/.../iio:deviceX/in_voltageX_scale_available
|
|
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
|
|
What: /sys/.../iio:deviceX/out_voltageX_scale_available
|
|
What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
|
|
What: /sys/.../iio:deviceX/in_capacitance_scale_available
|
|
What: /sys/.../iio:deviceX/in_pressure_scale_available
|
|
What: /sys/.../iio:deviceX/in_pressureY_scale_available
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
If a discrete set of scale values is available, they
|
|
are listed in this attribute.
|
|
|
|
What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware applied gain factor. If shared across all channels,
|
|
<type>_hardwaregain is used.
|
|
|
|
What: /sys/.../in_accel_filter_low_pass_3db_frequency
|
|
What: /sys/.../in_magn_filter_low_pass_3db_frequency
|
|
What: /sys/.../in_anglvel_filter_low_pass_3db_frequency
|
|
KernelVersion: 3.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
If a known or controllable low pass filter is applied
|
|
to the underlying data channel, then this parameter
|
|
gives the 3dB frequency of the filter in Hz.
|
|
|
|
What: /sys/.../in_accel_filter_high_pass_3db_frequency
|
|
What: /sys/.../in_anglvel_filter_high_pass_3db_frequency
|
|
What: /sys/.../in_magn_filter_high_pass_3db_frequency
|
|
KernelVersion: 4.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
If a known or controllable high pass filter is applied
|
|
to the underlying data channel, then this parameter
|
|
gives the 3dB frequency of the filter in Hz.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled, no bias etc.) output voltage for
|
|
channel Y. The number must always be specified and
|
|
unique if the output corresponds to a single channel.
|
|
While DAC like devices typically use out_voltage,
|
|
a continuous frequency generating device, such as
|
|
a DDS or PLL should use out_altvoltage.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled, no bias etc.) output voltage for an aggregate of
|
|
channel Y, channel Z, etc. This interface is available in cases
|
|
where a single output sets the value for multiple channels
|
|
simultaneously.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
|
|
KernelVersion: 2.6.38
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Specifies the output powerdown mode.
|
|
DAC output stage is disconnected from the amplifier and
|
|
1kohm_to_gnd: connected to ground via an 1kOhm resistor,
|
|
2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor,
|
|
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
|
|
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
|
|
90kohm_to_gnd: connected to ground via a 90kOhm resistor,
|
|
100kohm_to_gnd: connected to ground via an 100kOhm resistor,
|
|
125kohm_to_gnd: connected to ground via an 125kOhm resistor,
|
|
500kohm_to_gnd: connected to ground via a 500kOhm resistor,
|
|
640kohm_to_gnd: connected to ground via a 640kOhm resistor,
|
|
three_state: left floating.
|
|
For a list of available output power down options read
|
|
outX_powerdown_mode_available. If Y is not present the
|
|
mode is shared across all outputs.
|
|
|
|
What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available
|
|
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
|
|
What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available
|
|
What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
|
|
KernelVersion: 2.6.38
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Lists all available output power down modes.
|
|
If Y is not present the mode is shared across all outputs.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
|
|
KernelVersion: 2.6.38
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Writing 1 causes output Y to enter the power down mode specified
|
|
by the corresponding outY_powerdown_mode. DAC output stage is
|
|
disconnected from the amplifier. Clearing returns to normal
|
|
operation. Y may be suppressed if all outputs are controlled
|
|
together.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
|
|
KernelVersion: 3.4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Output frequency for channel Y in Hz. The number must always be
|
|
specified and unique if the output corresponds to a single
|
|
channel.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
|
|
KernelVersion: 3.4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Phase in radians of one frequency/clock output Y
|
|
(out_altvoltageY) relative to another frequency/clock output
|
|
(out_altvoltageZ) of the device X. The number must always be
|
|
specified and unique if the output corresponds to a single
|
|
channel.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/events
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Configuration of which hardware generated events are passed up
|
|
to user-space.
|
|
|
|
What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_voltageY_thresh_either_en
|
|
What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Event generated when channel passes a threshold in the specified
|
|
(_rising|_falling) direction. If the direction is not specified,
|
|
then either the device will report an event which ever direction
|
|
a single threshold value is passed in (e.g.
|
|
<type>[Y][_name]_<raw|input>_thresh_value) or
|
|
<type>[Y][_name]_<raw|input>_thresh_rising_value and
|
|
<type>[Y][_name]_<raw|input>_thresh_falling_value may take
|
|
different values, but the device can only enable both thresholds
|
|
or neither.
|
|
Note the driver will assume the last p events requested are
|
|
to be enabled where p is how many it supports (which may vary
|
|
depending on the exact set requested. So if you want to be
|
|
sure you have set what you think you have, check the contents of
|
|
these attributes after everything is configured. Drivers may
|
|
have to buffer any parameters so that they are consistent when
|
|
a given event type is enabled at a future point (and not those for
|
|
whatever event was previously enabled).
|
|
|
|
What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Event generated when channel passes a threshold on the rate of
|
|
change (1st differential) in the specified (_rising|_falling)
|
|
direction. If the direction is not specified, then either the
|
|
device will report an event which ever direction a single
|
|
threshold value is passed in (e.g.
|
|
<type>[Y][_name]_<raw|input>_roc_value) or
|
|
<type>[Y][_name]_<raw|input>_roc_rising_value and
|
|
<type>[Y][_name]_<raw|input>_roc_falling_value may take
|
|
different values, but the device can only enable both rate of
|
|
change thresholds or neither.
|
|
Note the driver will assume the last p events requested are
|
|
to be enabled where p is however many it supports (which may
|
|
vary depending on the exact set requested. So if you want to be
|
|
sure you have set what you think you have, check the contents of
|
|
these attributes after everything is configured. Drivers may
|
|
have to buffer any parameters so that they are consistent when
|
|
a given event type is enabled a future point (and not those for
|
|
whatever event was previously enabled).
|
|
|
|
What: /sys/.../events/in_accel_thresh_rising_value
|
|
What: /sys/.../events/in_accel_thresh_falling_value
|
|
What: /sys/.../events/in_accel_x_raw_thresh_rising_value
|
|
What: /sys/.../events/in_accel_x_raw_thresh_falling_value
|
|
What: /sys/.../events/in_accel_y_raw_thresh_rising_value
|
|
What: /sys/.../events/in_accel_y_raw_thresh_falling_value
|
|
What: /sys/.../events/in_accel_z_raw_thresh_rising_value
|
|
What: /sys/.../events/in_accel_z_raw_thresh_falling_value
|
|
What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value
|
|
What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value
|
|
What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value
|
|
What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value
|
|
What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value
|
|
What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value
|
|
What: /sys/.../events/in_magn_x_raw_thresh_rising_value
|
|
What: /sys/.../events/in_magn_x_raw_thresh_falling_value
|
|
What: /sys/.../events/in_magn_y_raw_thresh_rising_value
|
|
What: /sys/.../events/in_magn_y_raw_thresh_falling_value
|
|
What: /sys/.../events/in_magn_z_raw_thresh_rising_value
|
|
What: /sys/.../events/in_magn_z_raw_thresh_falling_value
|
|
What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value
|
|
What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value
|
|
What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value
|
|
What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value
|
|
What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value
|
|
What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value
|
|
What: /sys/.../events/in_voltageY_raw_thresh_rising_value
|
|
What: /sys/.../events/in_voltageY_raw_thresh_falling_value
|
|
What: /sys/.../events/in_tempY_raw_thresh_rising_value
|
|
What: /sys/.../events/in_tempY_raw_thresh_falling_value
|
|
What: /sys/.../events/in_illuminance0_thresh_falling_value
|
|
what: /sys/.../events/in_illuminance0_thresh_rising_value
|
|
what: /sys/.../events/in_proximity0_thresh_falling_value
|
|
what: /sys/.../events/in_proximity0_thresh_rising_value
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Specifies the value of threshold that the device is comparing
|
|
against for the events enabled by
|
|
<type>Y[_name]_thresh[_rising|falling]_en.
|
|
If separate attributes exist for the two directions, but
|
|
direction is not specified for this attribute, then a single
|
|
threshold value applies to both directions.
|
|
The raw or input element of the name indicates whether the
|
|
value is in raw device units or in processed units (as _raw
|
|
and _input do on sysfs direct channel read attributes).
|
|
|
|
What: /sys/.../events/in_accel_scale
|
|
What: /sys/.../events/in_accel_peak_scale
|
|
What: /sys/.../events/in_anglvel_scale
|
|
What: /sys/.../events/in_magn_scale
|
|
What: /sys/.../events/in_rot_from_north_magnetic_scale
|
|
What: /sys/.../events/in_rot_from_north_true_scale
|
|
What: /sys/.../events/in_voltage_scale
|
|
What: /sys/.../events/in_voltage_supply_scale
|
|
What: /sys/.../events/in_temp_scale
|
|
What: /sys/.../events/in_illuminance_scale
|
|
What: /sys/.../events/in_proximity_scale
|
|
KernelVersion: 3.21
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Specifies the conversion factor from the standard units
|
|
to device specific units used to set the event trigger
|
|
threshold.
|
|
|
|
What: /sys/.../events/in_accel_x_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_accel_x_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_accel_x_thresh_either_hysteresis
|
|
What: /sys/.../events/in_accel_y_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_accel_y_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_accel_y_thresh_either_hysteresis
|
|
What: /sys/.../events/in_accel_z_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_accel_z_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_accel_z_thresh_either_hysteresis
|
|
What: /sys/.../events/in_anglvel_x_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_anglvel_x_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_anglvel_x_thresh_either_hysteresis
|
|
What: /sys/.../events/in_anglvel_y_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_anglvel_y_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_anglvel_y_thresh_either_hysteresis
|
|
What: /sys/.../events/in_anglvel_z_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_anglvel_z_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_anglvel_z_thresh_either_hysteresis
|
|
What: /sys/.../events/in_magn_x_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_magn_x_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_magn_x_thresh_either_hysteresis
|
|
What: /sys/.../events/in_magn_y_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_magn_y_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_magn_y_thresh_either_hysteresis
|
|
What: /sys/.../events/in_magn_z_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_magn_z_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_magn_z_thresh_either_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis
|
|
What: /sys/.../events/in_voltageY_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_voltageY_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_voltageY_thresh_either_hysteresis
|
|
What: /sys/.../events/in_tempY_thresh_rising_hysteresis
|
|
What: /sys/.../events/in_tempY_thresh_falling_hysteresis
|
|
What: /sys/.../events/in_tempY_thresh_either_hysteresis
|
|
What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis
|
|
what: /sys/.../events/in_illuminance0_thresh_rising_hysteresis
|
|
what: /sys/.../events/in_illuminance0_thresh_either_hysteresis
|
|
what: /sys/.../events/in_proximity0_thresh_falling_hysteresis
|
|
what: /sys/.../events/in_proximity0_thresh_rising_hysteresis
|
|
what: /sys/.../events/in_proximity0_thresh_either_hysteresis
|
|
KernelVersion: 3.13
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Specifies the hysteresis of threshold that the device is comparing
|
|
against for the events enabled by
|
|
<type>Y[_name]_thresh[_(rising|falling)]_hysteresis.
|
|
If separate attributes exist for the two directions, but
|
|
direction is not specified for this attribute, then a single
|
|
hysteresis value applies to both directions.
|
|
For falling events the hysteresis is added to the _value attribute for
|
|
this event to get the upper threshold for when the event goes back to
|
|
normal, for rising events the hysteresis is subtracted from the _value
|
|
attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200
|
|
and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event
|
|
will get activated once in_voltage0_raw goes above 1200 and will become
|
|
deactivated again once the value falls below 1150.
|
|
|
|
What: /sys/.../events/in_accel_x_raw_roc_rising_value
|
|
What: /sys/.../events/in_accel_x_raw_roc_falling_value
|
|
What: /sys/.../events/in_accel_y_raw_roc_rising_value
|
|
What: /sys/.../events/in_accel_y_raw_roc_falling_value
|
|
What: /sys/.../events/in_accel_z_raw_roc_rising_value
|
|
What: /sys/.../events/in_accel_z_raw_roc_falling_value
|
|
What: /sys/.../events/in_anglvel_x_raw_roc_rising_value
|
|
What: /sys/.../events/in_anglvel_x_raw_roc_falling_value
|
|
What: /sys/.../events/in_anglvel_y_raw_roc_rising_value
|
|
What: /sys/.../events/in_anglvel_y_raw_roc_falling_value
|
|
What: /sys/.../events/in_anglvel_z_raw_roc_rising_value
|
|
What: /sys/.../events/in_anglvel_z_raw_roc_falling_value
|
|
What: /sys/.../events/in_magn_x_raw_roc_rising_value
|
|
What: /sys/.../events/in_magn_x_raw_roc_falling_value
|
|
What: /sys/.../events/in_magn_y_raw_roc_rising_value
|
|
What: /sys/.../events/in_magn_y_raw_roc_falling_value
|
|
What: /sys/.../events/in_magn_z_raw_roc_rising_value
|
|
What: /sys/.../events/in_magn_z_raw_roc_falling_value
|
|
What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value
|
|
What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value
|
|
What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value
|
|
What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value
|
|
What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value
|
|
What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value
|
|
What: /sys/.../events/in_voltageY_raw_roc_rising_value
|
|
What: /sys/.../events/in_voltageY_raw_roc_falling_value
|
|
What: /sys/.../events/in_tempY_raw_roc_rising_value
|
|
What: /sys/.../events/in_tempY_raw_roc_falling_value
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Specifies the value of rate of change threshold that the
|
|
device is comparing against for the events enabled by
|
|
<type>[Y][_name]_roc[_rising|falling]_en.
|
|
If separate attributes exist for the two directions,
|
|
but direction is not specified for this attribute,
|
|
then a single threshold value applies to both directions.
|
|
The raw or input element of the name indicates whether the
|
|
value is in raw device units or in processed units (as _raw
|
|
and _input do on sysfs direct channel read attributes).
|
|
|
|
What: /sys/.../events/in_accel_x_thresh_rising_period
|
|
What: /sys/.../events/in_accel_x_thresh_falling_period
|
|
What: /sys/.../events/in_accel_x_roc_rising_period
|
|
What: /sys/.../events/in_accel_x_roc_falling_period
|
|
What: /sys/.../events/in_accel_y_thresh_rising_period
|
|
What: /sys/.../events/in_accel_y_thresh_falling_period
|
|
What: /sys/.../events/in_accel_y_roc_rising_period
|
|
What: /sys/.../events/in_accel_y_roc_falling_period
|
|
What: /sys/.../events/in_accel_z_thresh_rising_period
|
|
What: /sys/.../events/in_accel_z_thresh_falling_period
|
|
What: /sys/.../events/in_accel_z_roc_rising_period
|
|
What: /sys/.../events/in_accel_z_roc_falling_period
|
|
What: /sys/.../events/in_anglvel_x_thresh_rising_period
|
|
What: /sys/.../events/in_anglvel_x_thresh_falling_period
|
|
What: /sys/.../events/in_anglvel_x_roc_rising_period
|
|
What: /sys/.../events/in_anglvel_x_roc_falling_period
|
|
What: /sys/.../events/in_anglvel_y_thresh_rising_period
|
|
What: /sys/.../events/in_anglvel_y_thresh_falling_period
|
|
What: /sys/.../events/in_anglvel_y_roc_rising_period
|
|
What: /sys/.../events/in_anglvel_y_roc_falling_period
|
|
What: /sys/.../events/in_anglvel_z_thresh_rising_period
|
|
What: /sys/.../events/in_anglvel_z_thresh_falling_period
|
|
What: /sys/.../events/in_anglvel_z_roc_rising_period
|
|
What: /sys/.../events/in_anglvel_z_roc_falling_period
|
|
What: /sys/.../events/in_magn_x_thresh_rising_period
|
|
What: /sys/.../events/in_magn_x_thresh_falling_period
|
|
What: /sys/.../events/in_magn_x_roc_rising_period
|
|
What: /sys/.../events/in_magn_x_roc_falling_period
|
|
What: /sys/.../events/in_magn_y_thresh_rising_period
|
|
What: /sys/.../events/in_magn_y_thresh_falling_period
|
|
What: /sys/.../events/in_magn_y_roc_rising_period
|
|
What: /sys/.../events/in_magn_y_roc_falling_period
|
|
What: /sys/.../events/in_magn_z_thresh_rising_period
|
|
What: /sys/.../events/in_magn_z_thresh_falling_period
|
|
What: /sys/.../events/in_magn_z_roc_rising_period
|
|
What: /sys/.../events/in_magn_z_roc_falling_period
|
|
What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period
|
|
What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period
|
|
What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period
|
|
What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period
|
|
What: /sys/.../events/in_rot_from_north_true_thresh_rising_period
|
|
What: /sys/.../events/in_rot_from_north_true_thresh_falling_period
|
|
What: /sys/.../events/in_rot_from_north_true_roc_rising_period
|
|
What: /sys/.../events/in_rot_from_north_true_roc_falling_period
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period
|
|
What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period
|
|
What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period
|
|
What: /sys/.../events/in_voltageY_supply_thresh_rising_period
|
|
What: /sys/.../events/in_voltageY_supply_thresh_falling_period
|
|
What: /sys/.../events/in_voltageY_supply_roc_rising_period
|
|
What: /sys/.../events/in_voltageY_supply_roc_falling_period
|
|
What: /sys/.../events/in_voltageY_thresh_rising_period
|
|
What: /sys/.../events/in_voltageY_thresh_falling_period
|
|
What: /sys/.../events/in_voltageY_roc_rising_period
|
|
What: /sys/.../events/in_voltageY_roc_falling_period
|
|
What: /sys/.../events/in_tempY_thresh_rising_period
|
|
What: /sys/.../events/in_tempY_thresh_falling_period
|
|
What: /sys/.../events/in_tempY_roc_rising_period
|
|
What: /sys/.../events/in_tempY_roc_falling_period
|
|
What: /sys/.../events/in_accel_x&y&z_mag_falling_period
|
|
What: /sys/.../events/in_intensity0_thresh_period
|
|
What: /sys/.../events/in_proximity0_thresh_period
|
|
What: /sys/.../events/in_activity_still_thresh_rising_period
|
|
What: /sys/.../events/in_activity_still_thresh_falling_period
|
|
What: /sys/.../events/in_activity_walking_thresh_rising_period
|
|
What: /sys/.../events/in_activity_walking_thresh_falling_period
|
|
What: /sys/.../events/in_activity_jogging_thresh_rising_period
|
|
What: /sys/.../events/in_activity_jogging_thresh_falling_period
|
|
What: /sys/.../events/in_activity_running_thresh_rising_period
|
|
What: /sys/.../events/in_activity_running_thresh_falling_period
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Period of time (in seconds) for which the condition must be
|
|
met before an event is generated. If direction is not
|
|
specified then this period applies to both directions.
|
|
|
|
What: /sys/.../events/in_accel_thresh_rising_low_pass_filter_3db
|
|
What: /sys/.../events/in_anglvel_thresh_rising_low_pass_filter_3db
|
|
What: /sys/.../events/in_magn_thresh_rising_low_pass_filter_3db
|
|
KernelVersion: 4.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
If a low pass filter can be applied to the event generation
|
|
this property gives its 3db frequency in Hz.
|
|
A value of zero disables the filter.
|
|
|
|
What: /sys/.../events/in_accel_thresh_rising_high_pass_filter_3db
|
|
What: /sys/.../events/in_anglvel_thresh_rising_high_pass_filter_3db
|
|
What: /sys/.../events/in_magn_thresh_rising_high_pass_filter_3db
|
|
KernelVersion: 4.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
If a high pass filter can be applied to the event generation
|
|
this property gives its 3db frequency in Hz.
|
|
A value of zero disables the filter.
|
|
|
|
What: /sys/.../events/in_activity_still_thresh_rising_en
|
|
What: /sys/.../events/in_activity_still_thresh_falling_en
|
|
What: /sys/.../events/in_activity_walking_thresh_rising_en
|
|
What: /sys/.../events/in_activity_walking_thresh_falling_en
|
|
What: /sys/.../events/in_activity_jogging_thresh_rising_en
|
|
What: /sys/.../events/in_activity_jogging_thresh_falling_en
|
|
What: /sys/.../events/in_activity_running_thresh_rising_en
|
|
What: /sys/.../events/in_activity_running_thresh_falling_en
|
|
KernelVersion: 3.19
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Enables or disables activitity events. Depending on direction
|
|
an event is generated when sensor ENTERS or LEAVES a given state.
|
|
|
|
What: /sys/.../events/in_activity_still_thresh_rising_value
|
|
What: /sys/.../events/in_activity_still_thresh_falling_value
|
|
What: /sys/.../events/in_activity_walking_thresh_rising_value
|
|
What: /sys/.../events/in_activity_walking_thresh_falling_value
|
|
What: /sys/.../events/in_activity_jogging_thresh_rising_value
|
|
What: /sys/.../events/in_activity_jogging_thresh_falling_value
|
|
What: /sys/.../events/in_activity_running_thresh_rising_value
|
|
What: /sys/.../events/in_activity_running_thresh_falling_value
|
|
KernelVersion: 3.19
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Confidence value (in units as percentage) to be used
|
|
for deciding when an event should be generated. E.g for
|
|
running: If the confidence value reported by the sensor
|
|
is greater than in_activity_running_thresh_rising_value
|
|
then the sensor ENTERS running state. Conversely, if the
|
|
confidence value reported by the sensor is lower than
|
|
in_activity_running_thresh_falling_value then the sensor
|
|
is LEAVING running state.
|
|
|
|
What: /sys/.../iio:deviceX/events/in_accel_mag_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_x_mag_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_y_mag_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_z_mag_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en
|
|
What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Similar to in_accel_x_thresh[_rising|_falling]_en, but here the
|
|
magnitude of the channel is compared to the threshold, not its
|
|
signed value.
|
|
|
|
What: /sys/.../events/in_accel_raw_mag_value
|
|
What: /sys/.../events/in_accel_x_raw_mag_rising_value
|
|
What: /sys/.../events/in_accel_y_raw_mag_rising_value
|
|
What: /sys/.../events/in_accel_z_raw_mag_rising_value
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
The value to which the magnitude of the channel is compared. If
|
|
number or direction is not specified, applies to all channels of
|
|
this type.
|
|
|
|
What: /sys/.../events/in_steps_change_en
|
|
KernelVersion: 4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Event generated when channel passes a threshold on the absolute
|
|
change in value. E.g. for steps: a step change event is
|
|
generated each time the user takes N steps, where N is set using
|
|
in_steps_change_value.
|
|
|
|
What: /sys/.../events/in_steps_change_value
|
|
KernelVersion: 4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Specifies the value of change threshold that the
|
|
device is comparing against for the events enabled by
|
|
<type>[Y][_name]_roc[_rising|falling|]_en. E.g. for steps:
|
|
if set to 3, a step change event will be generated every 3
|
|
steps.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
The name of the trigger source being used, as per string given
|
|
in /sys/class/iio/triggerY/name.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer/length
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Number of scans contained by the buffer.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer/enable
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Actually start the buffer capture up. Will start trigger
|
|
if first device and appropriate.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/scan_elements
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Directory containing interfaces for elements that will be
|
|
captured for a single triggered sample set in the buffer.
|
|
|
|
What: /sys/.../iio:deviceX/scan_elements/in_accel_x_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_accel_y_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_accel_z_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_incli_x_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_pressure_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en
|
|
What: /sys/.../iio:deviceX/scan_elements/in_proximity_en
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Scan element control for triggered data capture.
|
|
|
|
What: /sys/.../iio:deviceX/scan_elements/in_accel_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_anglvel_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_magn_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_incli_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltage_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_pressure_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type
|
|
What: /sys/.../iio:deviceX/scan_elements/in_proximity_type
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Description of the scan element data storage within the buffer
|
|
and hence the form in which it is read from user-space.
|
|
Form is [be|le]:[s|u]bits/storagebits[>>shift].
|
|
be or le specifies big or little endian. s or u specifies if
|
|
signed (2's complement) or unsigned. bits is the number of bits
|
|
of data and storagebits is the space (after padding) that it
|
|
occupies in the buffer. shift if specified, is the shift that
|
|
needs to be applied prior to masking out unused bits. Some
|
|
devices put their data in the middle of the transferred elements
|
|
with additional information on both sides. Note that some
|
|
devices will have additional information in the unused bits
|
|
so to get a clean value, the bits value must be used to mask
|
|
the buffer output value appropriately. The storagebits value
|
|
also specifies the data alignment. So s48/64>>2 will be a
|
|
signed 48 bit integer stored in a 64 bit location aligned to
|
|
a 64 bit boundary. To obtain the clean value, shift right 2
|
|
and apply a mask to zero the top 16 bits of the result.
|
|
For other storage combinations this attribute will be extended
|
|
appropriately.
|
|
|
|
What: /sys/.../iio:deviceX/scan_elements/in_accel_type_available
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
If the type parameter can take one of a small set of values,
|
|
this attribute lists them.
|
|
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_accel_x_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_accel_y_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_accel_z_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_pressureY_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_pressure_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index
|
|
What: /sys/.../iio:deviceX/scan_elements/in_proximity_index
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
A single positive integer specifying the position of this
|
|
scan element in the buffer. Note these are not dependent on
|
|
what is enabled and may not be contiguous. Thus for user-space
|
|
to establish the full layout these must be used in conjunction
|
|
with all _en attributes to establish which channels are present,
|
|
and the relevant _type attributes to establish the data storage
|
|
format.
|
|
|
|
What: /sys/.../iio:deviceX/in_activity_still_input
|
|
What: /sys/.../iio:deviceX/in_activity_walking_input
|
|
What: /sys/.../iio:deviceX/in_activity_jogging_input
|
|
What: /sys/.../iio:deviceX/in_activity_running_input
|
|
KernelVersion: 3.19
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This attribute is used to read the confidence for an activity
|
|
expressed in units as percentage.
|
|
|
|
What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
|
|
KernelVersion: 2.6.38
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This attribute is used to read the amount of quadrature error
|
|
present in the device at a given time.
|
|
|
|
What: /sys/.../iio:deviceX/in_accelX_power_mode
|
|
KernelVersion: 3.11
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Specifies the chip power mode.
|
|
low_noise: reduce noise level from ADC,
|
|
low_power: enable low current consumption.
|
|
For a list of available output power modes read
|
|
in_accel_power_mode_available.
|
|
|
|
What: /sys/.../iio:deviceX/in_energy_input
|
|
What: /sys/.../iio:deviceX/in_energy_raw
|
|
KernelVersion: 4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This attribute is used to read the energy value reported by the
|
|
device (e.g.: human activity sensors report energy burnt by the
|
|
user). Units after application of scale are Joules.
|
|
|
|
What: /sys/.../iio:deviceX/in_distance_input
|
|
What: /sys/.../iio:deviceX/in_distance_raw
|
|
KernelVersion: 4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This attribute is used to read the measured distance to an object
|
|
or the distance covered by the user since the last reboot while
|
|
activated. Units after application of scale are meters.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/store_eeprom
|
|
KernelVersion: 3.4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Writing '1' stores the current device configuration into
|
|
on-chip EEPROM. After power-up or chip reset the device will
|
|
automatically load the saved configuration.
|
|
|
|
What: /sys/.../iio:deviceX/in_proximity_raw
|
|
What: /sys/.../iio:deviceX/in_proximity_input
|
|
What: /sys/.../iio:deviceX/in_proximityY_raw
|
|
KernelVersion: 3.4
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Proximity measurement indicating that some
|
|
object is near the sensor, usually by observing
|
|
reflectivity of infrared or ultrasound emitted.
|
|
Often these sensors are unit less and as such conversion
|
|
to SI units is not possible. Higher proximity measurements
|
|
indicate closer objects, and vice versa. Units after
|
|
application of scale and offset are meters.
|
|
|
|
What: /sys/.../iio:deviceX/in_illuminance_input
|
|
What: /sys/.../iio:deviceX/in_illuminance_raw
|
|
What: /sys/.../iio:deviceX/in_illuminanceY_input
|
|
What: /sys/.../iio:deviceX/in_illuminanceY_raw
|
|
What: /sys/.../iio:deviceX/in_illuminanceY_mean_raw
|
|
What: /sys/.../iio:deviceX/in_illuminance_ir_raw
|
|
What: /sys/.../iio:deviceX/in_illuminance_clear_raw
|
|
KernelVersion: 3.4
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Illuminance measurement, units after application of scale
|
|
and offset are lux.
|
|
|
|
What: /sys/.../iio:deviceX/in_intensityY_raw
|
|
What: /sys/.../iio:deviceX/in_intensityY_ir_raw
|
|
What: /sys/.../iio:deviceX/in_intensityY_both_raw
|
|
What: /sys/.../iio:deviceX/in_intensityY_uv_raw
|
|
What: /sys/.../iio:deviceX/in_intensityY_duv_raw
|
|
KernelVersion: 3.4
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Unit-less light intensity. Modifiers both and ir indicate
|
|
that measurements contain visible and infrared light
|
|
components or just infrared light, respectively. Modifier
|
|
uv indicates that measurements contain ultraviolet light
|
|
components. Modifier duv indicates that measurements
|
|
contain deep ultraviolet light components.
|
|
|
|
What: /sys/.../iio:deviceX/in_uvindex_input
|
|
KernelVersion: 4.6
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
UV light intensity index measuring the human skin's response to
|
|
different wavelength of sunlight weighted according to the
|
|
standardised CIE Erythemal Action Spectrum. UV index values range
|
|
from 0 (low) to >=11 (extreme).
|
|
|
|
What: /sys/.../iio:deviceX/in_intensity_red_integration_time
|
|
What: /sys/.../iio:deviceX/in_intensity_green_integration_time
|
|
What: /sys/.../iio:deviceX/in_intensity_blue_integration_time
|
|
What: /sys/.../iio:deviceX/in_intensity_clear_integration_time
|
|
What: /sys/.../iio:deviceX/in_illuminance_integration_time
|
|
KernelVersion: 3.12
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This attribute is used to get/set the integration time in
|
|
seconds.
|
|
|
|
What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
|
|
KernelVersion: 4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Number of seconds in which to compute speed.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw
|
|
KernelVersion: 3.15
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw value of quaternion components using a format
|
|
x y z w. Here x, y, and z component represents the axis about
|
|
which a rotation will occur and w component represents the
|
|
amount of rotation.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw
|
|
KernelVersion: 3.15
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw value of rotation from true/magnetic north measured with
|
|
or without compensation from tilt sensors.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentX_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentX_i_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_currentX_q_raw
|
|
KernelVersion: 3.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw current measurement from channel X. Units are in milliamps
|
|
after application of scale and offset. If no offset or scale is
|
|
present, output should be considered as processed with the
|
|
unit in milliamps.
|
|
|
|
Channels with 'i' and 'q' modifiers always exist in pairs and both
|
|
channels refer to the same signal. The 'i' channel contains the in-phase
|
|
component of the signal while the 'q' channel contains the quadrature
|
|
component.
|
|
|
|
What: /sys/.../iio:deviceX/in_energy_en
|
|
What: /sys/.../iio:deviceX/in_distance_en
|
|
What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en
|
|
What: /sys/.../iio:deviceX/in_steps_en
|
|
KernelVersion: 3.19
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Activates a device feature that runs in firmware/hardware.
|
|
E.g. for steps: the pedometer saves power while not used;
|
|
when activated, it will count the steps taken by the user in
|
|
firmware and export them through in_steps_input.
|
|
|
|
What: /sys/.../iio:deviceX/in_steps_input
|
|
KernelVersion: 3.19
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This attribute is used to read the number of steps taken by the user
|
|
since the last reboot while activated.
|
|
|
|
What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_input
|
|
What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_raw
|
|
KernelVersion: 3.19
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This attribute is used to read the current speed value of the
|
|
user (which is the norm or magnitude of the velocity vector).
|
|
Units after application of scale are m/s.
|
|
|
|
What: /sys/.../iio:deviceX/in_steps_debounce_count
|
|
KernelVersion: 4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Specifies the number of steps that must occur within
|
|
in_steps_filter_debounce_time for the pedometer to decide the
|
|
consumer is making steps.
|
|
|
|
What: /sys/.../iio:deviceX/in_steps_debounce_time
|
|
KernelVersion: 4.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Specifies number of seconds in which we compute the steps
|
|
that occur in order to decide if the consumer is making steps.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer/watermark
|
|
KernelVersion: 4.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
A single positive integer specifying the maximum number of scan
|
|
elements to wait for.
|
|
Poll will block until the watermark is reached.
|
|
Blocking read will wait until the minimum between the requested
|
|
read amount or the low water mark is available.
|
|
Non-blocking read will retrieve the available samples from the
|
|
buffer even if there are less samples then watermark level. This
|
|
allows the application to block on poll with a timeout and read
|
|
the available samples after the timeout expires and thus have a
|
|
maximum delay guarantee.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer/data_available
|
|
KernelVersion: 4.16
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
A read-only value indicating the bytes of data available in the
|
|
buffer. In the case of an output buffer, this indicates the
|
|
amount of empty space available to write data to. In the case of
|
|
an input buffer, this indicates the amount of data available for
|
|
reading.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_enabled
|
|
KernelVersion: 4.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
A read-only boolean value that indicates if the hardware fifo is
|
|
currently enabled or disabled. If the device does not have a
|
|
hardware fifo this entry is not present.
|
|
The hardware fifo is enabled when the buffer is enabled if the
|
|
current hardware fifo watermark level is set and other current
|
|
device settings allows it (e.g. if a trigger is set that samples
|
|
data differently that the hardware fifo does then hardware fifo
|
|
will not enabled).
|
|
If the hardware fifo is enabled and the level of the hardware
|
|
fifo reaches the hardware fifo watermark level the device will
|
|
flush its hardware fifo to the device buffer. Doing a non
|
|
blocking read on the device when no samples are present in the
|
|
device buffer will also force a flush.
|
|
When the hardware fifo is enabled there is no need to use a
|
|
trigger to use buffer mode since the watermark settings
|
|
guarantees that the hardware fifo is flushed to the device
|
|
buffer.
|
|
|
|
What: /sys/bus/iio/devices/iio:device*/buffer/hwfifo_timeout
|
|
KernelVersion: 4.12
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
A read/write property to provide capability to delay reporting of
|
|
samples till a timeout is reached. This allows host processors to
|
|
sleep, while the sensor is storing samples in its internal fifo.
|
|
The maximum timeout in seconds can be specified by setting
|
|
hwfifo_timeout.The current delay can be read by reading
|
|
hwfifo_timeout. A value of 0 means that there is no timeout.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark
|
|
KernelVersion: 4.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Read-only entry that contains a single integer specifying the
|
|
current watermark level for the hardware fifo. If the device
|
|
does not have a hardware fifo this entry is not present.
|
|
The watermark level for the hardware fifo is set by the driver
|
|
based on the value set by the user in buffer/watermark but
|
|
taking into account hardware limitations (e.g. most hardware
|
|
buffers are limited to 32-64 samples, some hardware buffers
|
|
watermarks are fixed or have minimum levels). A value of 0
|
|
means that the hardware watermark is unset.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_min
|
|
KernelVersion: 4.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
A single positive integer specifying the minimum watermark level
|
|
for the hardware fifo of this device. If the device does not
|
|
have a hardware fifo this entry is not present.
|
|
If the user sets buffer/watermark to a value less than this one,
|
|
then the hardware watermark will remain unset.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_max
|
|
KernelVersion: 4.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
A single positive integer specifying the maximum watermark level
|
|
for the hardware fifo of this device. If the device does not
|
|
have a hardware fifo this entry is not present.
|
|
If the user sets buffer/watermark to a value greater than this
|
|
one, then the hardware watermark will be capped at this value.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_available
|
|
KernelVersion: 4.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
A list of positive integers specifying the available watermark
|
|
levels for the hardware fifo. This entry is optional and if it
|
|
is not present it means that all the values between
|
|
hwfifo_watermark_min and hwfifo_watermark_max are supported.
|
|
If the user sets buffer/watermark to a value greater than
|
|
hwfifo_watermak_min but not equal to any of the values in this
|
|
list, the driver will chose an appropriate value for the
|
|
hardware fifo watermark level.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_tempX_calibemissivity
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibemissivity
|
|
KernelVersion: 4.1
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
The emissivity ratio of the surface in the field of view of the
|
|
contactless temperature sensor. Emissivity varies from 0 to 1,
|
|
with 1 being the emissivity of a black body.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio
|
|
KernelVersion: 4.2
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware applied number of measurements for acquiring one
|
|
data point. The HW will do <type>[_name]_oversampling_ratio
|
|
measurements and return the average value as output data. Each
|
|
value resulted from <type>[_name]_oversampling_ratio measurements
|
|
is considered as one sample for <type>[_name]_sampling_frequency.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_co2_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
|
|
KernelVersion: 4.3
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled no offset etc.) percentage reading of a substance.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_resistance_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw
|
|
KernelVersion: 4.3
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled no offset etc.) resistance reading that can be processed
|
|
into an ohm value.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/heater_enable
|
|
KernelVersion: 4.1.0
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
'1' (enable) or '0' (disable) specifying the enable
|
|
of heater function. Same reading values apply
|
|
This ABI is especially applicable for humidity sensors
|
|
to heatup the device and get rid of any condensation
|
|
in some humidity environment
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw
|
|
KernelVersion: 4.5
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled no offset etc.) pH reading of a substance as a negative
|
|
base-10 logarithm of hydrodium ions in a litre of water.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/mount_matrix
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_mount_matrix
|
|
What: /sys/bus/iio/devices/iio:deviceX/out_mount_matrix
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix
|
|
KernelVersion: 4.6
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Mounting matrix for IIO sensors. This is a rotation matrix which
|
|
informs userspace about sensor chip's placement relative to the
|
|
main hardware it is mounted on.
|
|
Main hardware placement is defined according to the local
|
|
reference frame related to the physical quantity the sensor
|
|
measures.
|
|
Given that the rotation matrix is defined in a board specific
|
|
way (platform data and / or device-tree), the main hardware
|
|
reference frame definition is left to the implementor's choice
|
|
(see below for a magnetometer example).
|
|
Applications should apply this rotation matrix to samples so
|
|
that when main hardware reference frame is aligned onto local
|
|
reference frame, then sensor chip reference frame is also
|
|
perfectly aligned with it.
|
|
Matrix is a 3x3 unitary matrix and typically looks like
|
|
[0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix
|
|
[1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware
|
|
are perfectly aligned with each other.
|
|
|
|
For example, a mounting matrix for a magnetometer sensor informs
|
|
userspace about sensor chip's ORIENTATION relative to the main
|
|
hardware.
|
|
More specifically, main hardware orientation is defined with
|
|
respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where :
|
|
* Y is in the ground plane and positive towards magnetic North ;
|
|
* X is in the ground plane, perpendicular to the North axis and
|
|
positive towards the East ;
|
|
* Z is perpendicular to the ground plane and positive upwards.
|
|
|
|
An implementor might consider that for a hand-held device, a
|
|
'natural' orientation would be 'front facing camera at the top'.
|
|
The main hardware reference frame could then be described as :
|
|
* Y is in the plane of the screen and is positive towards the
|
|
top of the screen ;
|
|
* X is in the plane of the screen, perpendicular to Y axis, and
|
|
positive towards the right hand side of the screen ;
|
|
* Z is perpendicular to the screen plane and positive out of the
|
|
screen.
|
|
Another example for a quadrotor UAV might be :
|
|
* Y is in the plane of the propellers and positive towards the
|
|
front-view camera;
|
|
* X is in the plane of the propellers, perpendicular to Y axis,
|
|
and positive towards the starboard side of the UAV ;
|
|
* Z is perpendicular to propellers plane and positive upwards.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw
|
|
KernelVersion: 4.8
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled no offset etc.) electric conductivity reading that
|
|
can be processed to siemens per meter.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw
|
|
KernelVersion: 4.10
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This interface is deprecated; please use the Counter subsystem.
|
|
|
|
Raw counter device counts from channel Y. For quadrature
|
|
counters, multiplication by an available [Y]_scale results in
|
|
the counts of a single quadrature signal phase from channel Y.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw
|
|
KernelVersion: 4.10
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This interface is deprecated; please use the Counter subsystem.
|
|
|
|
Raw counter device index value from channel Y. This attribute
|
|
provides an absolute positional reference (e.g. a pulse once per
|
|
revolution) which may be used to home positional systems as
|
|
required.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
|
|
KernelVersion: 4.12
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This interface is deprecated; please use the Counter subsystem.
|
|
|
|
A list of possible counting directions which are:
|
|
- "up" : counter device is increasing.
|
|
- "down": counter device is decreasing.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
|
|
KernelVersion: 4.12
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This interface is deprecated; please use the Counter subsystem.
|
|
|
|
Raw counter device counters direction for channel Y.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_phaseY_raw
|
|
KernelVersion: 4.18
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Raw (unscaled) phase difference reading from channel Y
|
|
that can be processed to radians.
|
|
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm2p5_input
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm2p5_input
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm4_input
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm4_input
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm10_input
|
|
What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm10_input
|
|
KernelVersion: 4.22
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Mass concentration reading of particulate matter in ug / m3.
|
|
pmX consists of particles with aerodynamic diameter less or
|
|
equal to X micrometers.
|