openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/tty/serial/bcm63xx_uart.c

898 lines
21 KiB
C
Raw Blame History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Derived from many drivers using generic_serial interface.
*
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
*
* Serial driver for BCM63xx integrated UART.
*
* Hardware flow control was _not_ tested since I only have RX/TX on
* my board.
*/
#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/console.h>
#include <linux/clk.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/sysrq.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_bcm63xx.h>
#define BCM63XX_NR_UARTS 2
static struct uart_port ports[BCM63XX_NR_UARTS];
/*
* rx interrupt mask / stat
*
* mask:
* - rx fifo full
* - rx fifo above threshold
* - rx fifo not empty for too long
*/
#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \
UART_IR_MASK(UART_IR_RXTHRESH) | \
UART_IR_MASK(UART_IR_RXTIMEOUT))
#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \
UART_IR_STAT(UART_IR_RXTHRESH) | \
UART_IR_STAT(UART_IR_RXTIMEOUT))
/*
* tx interrupt mask / stat
*
* mask:
* - tx fifo empty
* - tx fifo below threshold
*/
#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \
UART_IR_MASK(UART_IR_TXTRESH))
#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \
UART_IR_STAT(UART_IR_TXTRESH))
/*
* external input interrupt
*
* mask: any edge on CTS, DCD
*/
#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \
UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD))
/*
* handy uart register accessor
*/
static inline unsigned int bcm_uart_readl(struct uart_port *port,
unsigned int offset)
{
return __raw_readl(port->membase + offset);
}
static inline void bcm_uart_writel(struct uart_port *port,
unsigned int value, unsigned int offset)
{
__raw_writel(value, port->membase + offset);
}
/*
* serial core request to check if uart tx fifo is empty
*/
static unsigned int bcm_uart_tx_empty(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
}
/*
* serial core request to set RTS and DTR pin state and loopback mode
*/
static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
unsigned int val;
val = bcm_uart_readl(port, UART_MCTL_REG);
val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK);
/* invert of written value is reflected on the pin */
if (!(mctrl & TIOCM_DTR))
val |= UART_MCTL_DTR_MASK;
if (!(mctrl & TIOCM_RTS))
val |= UART_MCTL_RTS_MASK;
bcm_uart_writel(port, val, UART_MCTL_REG);
val = bcm_uart_readl(port, UART_CTL_REG);
if (mctrl & TIOCM_LOOP)
val |= UART_CTL_LOOPBACK_MASK;
else
val &= ~UART_CTL_LOOPBACK_MASK;
bcm_uart_writel(port, val, UART_CTL_REG);
}
/*
* serial core request to return RI, CTS, DCD and DSR pin state
*/
static unsigned int bcm_uart_get_mctrl(struct uart_port *port)
{
unsigned int val, mctrl;
mctrl = 0;
val = bcm_uart_readl(port, UART_EXTINP_REG);
if (val & UART_EXTINP_RI_MASK)
mctrl |= TIOCM_RI;
if (val & UART_EXTINP_CTS_MASK)
mctrl |= TIOCM_CTS;
if (val & UART_EXTINP_DCD_MASK)
mctrl |= TIOCM_CD;
if (val & UART_EXTINP_DSR_MASK)
mctrl |= TIOCM_DSR;
return mctrl;
}
/*
* serial core request to disable tx ASAP (used for flow control)
*/
static void bcm_uart_stop_tx(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_CTL_REG);
val &= ~(UART_CTL_TXEN_MASK);
bcm_uart_writel(port, val, UART_CTL_REG);
val = bcm_uart_readl(port, UART_IR_REG);
val &= ~UART_TX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
}
/*
* serial core request to (re)enable tx
*/
static void bcm_uart_start_tx(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
val |= UART_TX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
val = bcm_uart_readl(port, UART_CTL_REG);
val |= UART_CTL_TXEN_MASK;
bcm_uart_writel(port, val, UART_CTL_REG);
}
/*
* serial core request to stop rx, called before port shutdown
*/
static void bcm_uart_stop_rx(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
val &= ~UART_RX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
}
/*
* serial core request to enable modem status interrupt reporting
*/
static void bcm_uart_enable_ms(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
val |= UART_IR_MASK(UART_IR_EXTIP);
bcm_uart_writel(port, val, UART_IR_REG);
}
/*
* serial core request to start/stop emitting break char
*/
static void bcm_uart_break_ctl(struct uart_port *port, int ctl)
{
unsigned long flags;
unsigned int val;
spin_lock_irqsave(&port->lock, flags);
val = bcm_uart_readl(port, UART_CTL_REG);
if (ctl)
val |= UART_CTL_XMITBRK_MASK;
else
val &= ~UART_CTL_XMITBRK_MASK;
bcm_uart_writel(port, val, UART_CTL_REG);
spin_unlock_irqrestore(&port->lock, flags);
}
/*
* return port type in string format
*/
static const char *bcm_uart_type(struct uart_port *port)
{
return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL;
}
/*
* read all chars in rx fifo and send them to core
*/
static void bcm_uart_do_rx(struct uart_port *port)
{
struct tty_port *tty_port = &port->state->port;
unsigned int max_count;
/* limit number of char read in interrupt, should not be
* higher than fifo size anyway since we're much faster than
* serial port */
max_count = 32;
do {
unsigned int iestat, c, cstat;
char flag;
/* get overrun/fifo empty information from ier
* register */
iestat = bcm_uart_readl(port, UART_IR_REG);
if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
unsigned int val;
/* fifo reset is required to clear
* interrupt */
val = bcm_uart_readl(port, UART_CTL_REG);
val |= UART_CTL_RSTRXFIFO_MASK;
bcm_uart_writel(port, val, UART_CTL_REG);
port->icount.overrun++;
tty_insert_flip_char(tty_port, 0, TTY_OVERRUN);
}
if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
break;
cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
port->icount.rx++;
flag = TTY_NORMAL;
c &= 0xff;
if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
/* do stats first */
if (cstat & UART_FIFO_BRKDET_MASK) {
port->icount.brk++;
if (uart_handle_break(port))
continue;
}
if (cstat & UART_FIFO_PARERR_MASK)
port->icount.parity++;
if (cstat & UART_FIFO_FRAMEERR_MASK)
port->icount.frame++;
/* update flag wrt read_status_mask */
cstat &= port->read_status_mask;
if (cstat & UART_FIFO_BRKDET_MASK)
flag = TTY_BREAK;
if (cstat & UART_FIFO_FRAMEERR_MASK)
flag = TTY_FRAME;
if (cstat & UART_FIFO_PARERR_MASK)
flag = TTY_PARITY;
}
if (uart_handle_sysrq_char(port, c))
continue;
if ((cstat & port->ignore_status_mask) == 0)
tty_insert_flip_char(tty_port, c, flag);
} while (--max_count);
spin_unlock(&port->lock);
tty_flip_buffer_push(tty_port);
spin_lock(&port->lock);
}
/*
* fill tx fifo with chars to send, stop when fifo is about to be full
* or when all chars have been sent.
*/
static void bcm_uart_do_tx(struct uart_port *port)
{
struct circ_buf *xmit;
unsigned int val, max_count;
if (port->x_char) {
bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
port->icount.tx++;
port->x_char = 0;
return;
}
if (uart_tx_stopped(port)) {
bcm_uart_stop_tx(port);
return;
}
xmit = &port->state->xmit;
if (uart_circ_empty(xmit))
goto txq_empty;
val = bcm_uart_readl(port, UART_MCTL_REG);
val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
max_count = port->fifosize - val;
while (max_count--) {
unsigned int c;
c = xmit->buf[xmit->tail];
bcm_uart_writel(port, c, UART_FIFO_REG);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit))
goto txq_empty;
return;
txq_empty:
/* nothing to send, disable transmit interrupt */
val = bcm_uart_readl(port, UART_IR_REG);
val &= ~UART_TX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
return;
}
/*
* process uart interrupt
*/
static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id)
{
struct uart_port *port;
unsigned int irqstat;
port = dev_id;
spin_lock(&port->lock);
irqstat = bcm_uart_readl(port, UART_IR_REG);
if (irqstat & UART_RX_INT_STAT)
bcm_uart_do_rx(port);
if (irqstat & UART_TX_INT_STAT)
bcm_uart_do_tx(port);
if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) {
unsigned int estat;
estat = bcm_uart_readl(port, UART_EXTINP_REG);
if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS))
uart_handle_cts_change(port,
estat & UART_EXTINP_CTS_MASK);
if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD))
uart_handle_dcd_change(port,
estat & UART_EXTINP_DCD_MASK);
}
spin_unlock(&port->lock);
return IRQ_HANDLED;
}
/*
* enable rx & tx operation on uart
*/
static void bcm_uart_enable(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_CTL_REG);
val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
bcm_uart_writel(port, val, UART_CTL_REG);
}
/*
* disable rx & tx operation on uart
*/
static void bcm_uart_disable(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_CTL_REG);
val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK |
UART_CTL_RXEN_MASK);
bcm_uart_writel(port, val, UART_CTL_REG);
}
/*
* clear all unread data in rx fifo and unsent data in tx fifo
*/
static void bcm_uart_flush(struct uart_port *port)
{
unsigned int val;
/* empty rx and tx fifo */
val = bcm_uart_readl(port, UART_CTL_REG);
val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK;
bcm_uart_writel(port, val, UART_CTL_REG);
/* read any pending char to make sure all irq status are
* cleared */
(void)bcm_uart_readl(port, UART_FIFO_REG);
}
/*
* serial core request to initialize uart and start rx operation
*/
static int bcm_uart_startup(struct uart_port *port)
{
unsigned int val;
int ret;
/* mask all irq and flush port */
bcm_uart_disable(port);
bcm_uart_writel(port, 0, UART_IR_REG);
bcm_uart_flush(port);
/* clear any pending external input interrupt */
(void)bcm_uart_readl(port, UART_EXTINP_REG);
/* set rx/tx fifo thresh to fifo half size */
val = bcm_uart_readl(port, UART_MCTL_REG);
val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK);
val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT;
val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT;
bcm_uart_writel(port, val, UART_MCTL_REG);
/* set rx fifo timeout to 1 char time */
val = bcm_uart_readl(port, UART_CTL_REG);
val &= ~UART_CTL_RXTMOUTCNT_MASK;
val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT;
bcm_uart_writel(port, val, UART_CTL_REG);
/* report any edge on dcd and cts */
val = UART_EXTINP_INT_MASK;
val |= UART_EXTINP_DCD_NOSENSE_MASK;
val |= UART_EXTINP_CTS_NOSENSE_MASK;
bcm_uart_writel(port, val, UART_EXTINP_REG);
/* register irq and enable rx interrupts */
ret = request_irq(port->irq, bcm_uart_interrupt, 0,
bcm_uart_type(port), port);
if (ret)
return ret;
bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
bcm_uart_enable(port);
return 0;
}
/*
* serial core request to flush & disable uart
*/
static void bcm_uart_shutdown(struct uart_port *port)
{
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
bcm_uart_writel(port, 0, UART_IR_REG);
spin_unlock_irqrestore(&port->lock, flags);
bcm_uart_disable(port);
bcm_uart_flush(port);
free_irq(port->irq, port);
}
/*
* serial core request to change current uart setting
*/
static void bcm_uart_set_termios(struct uart_port *port,
struct ktermios *new,
struct ktermios *old)
{
unsigned int ctl, baud, quot, ier;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
/* disable uart while changing speed */
bcm_uart_disable(port);
bcm_uart_flush(port);
/* update Control register */
ctl = bcm_uart_readl(port, UART_CTL_REG);
ctl &= ~UART_CTL_BITSPERSYM_MASK;
switch (new->c_cflag & CSIZE) {
case CS5:
ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT);
break;
case CS6:
ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT);
break;
case CS7:
ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT);
break;
default:
ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT);
break;
}
ctl &= ~UART_CTL_STOPBITS_MASK;
if (new->c_cflag & CSTOPB)
ctl |= UART_CTL_STOPBITS_2;
else
ctl |= UART_CTL_STOPBITS_1;
ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
if (new->c_cflag & PARENB)
ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
if (new->c_cflag & PARODD)
ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
bcm_uart_writel(port, ctl, UART_CTL_REG);
/* update Baudword register */
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
quot = uart_get_divisor(port, baud) - 1;
bcm_uart_writel(port, quot, UART_BAUD_REG);
/* update Interrupt register */
ier = bcm_uart_readl(port, UART_IR_REG);
ier &= ~UART_IR_MASK(UART_IR_EXTIP);
if (UART_ENABLE_MS(port, new->c_cflag))
ier |= UART_IR_MASK(UART_IR_EXTIP);
bcm_uart_writel(port, ier, UART_IR_REG);
/* update read/ignore mask */
port->read_status_mask = UART_FIFO_VALID_MASK;
if (new->c_iflag & INPCK) {
port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
port->read_status_mask |= UART_FIFO_PARERR_MASK;
}
if (new->c_iflag & (BRKINT))
port->read_status_mask |= UART_FIFO_BRKDET_MASK;
port->ignore_status_mask = 0;
if (new->c_iflag & IGNPAR)
port->ignore_status_mask |= UART_FIFO_PARERR_MASK;
if (new->c_iflag & IGNBRK)
port->ignore_status_mask |= UART_FIFO_BRKDET_MASK;
if (!(new->c_cflag & CREAD))
port->ignore_status_mask |= UART_FIFO_VALID_MASK;
uart_update_timeout(port, new->c_cflag, baud);
bcm_uart_enable(port);
spin_unlock_irqrestore(&port->lock, flags);
}
/*
* serial core request to claim uart iomem
*/
static int bcm_uart_request_port(struct uart_port *port)
{
unsigned int size;
size = RSET_UART_SIZE;
if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
dev_err(port->dev, "Memory region busy\n");
return -EBUSY;
}
port->membase = ioremap(port->mapbase, size);
if (!port->membase) {
dev_err(port->dev, "Unable to map registers\n");
release_mem_region(port->mapbase, size);
return -EBUSY;
}
return 0;
}
/*
* serial core request to release uart iomem
*/
static void bcm_uart_release_port(struct uart_port *port)
{
release_mem_region(port->mapbase, RSET_UART_SIZE);
iounmap(port->membase);
}
/*
* serial core request to do any port required autoconfiguration
*/
static void bcm_uart_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE) {
if (bcm_uart_request_port(port))
return;
port->type = PORT_BCM63XX;
}
}
/*
* serial core request to check that port information in serinfo are
* suitable
*/
static int bcm_uart_verify_port(struct uart_port *port,
struct serial_struct *serinfo)
{
if (port->type != PORT_BCM63XX)
return -EINVAL;
if (port->irq != serinfo->irq)
return -EINVAL;
if (port->iotype != serinfo->io_type)
return -EINVAL;
if (port->mapbase != (unsigned long)serinfo->iomem_base)
return -EINVAL;
return 0;
}
/* serial core callbacks */
static struct uart_ops bcm_uart_ops = {
.tx_empty = bcm_uart_tx_empty,
.get_mctrl = bcm_uart_get_mctrl,
.set_mctrl = bcm_uart_set_mctrl,
.start_tx = bcm_uart_start_tx,
.stop_tx = bcm_uart_stop_tx,
.stop_rx = bcm_uart_stop_rx,
.enable_ms = bcm_uart_enable_ms,
.break_ctl = bcm_uart_break_ctl,
.startup = bcm_uart_startup,
.shutdown = bcm_uart_shutdown,
.set_termios = bcm_uart_set_termios,
.type = bcm_uart_type,
.release_port = bcm_uart_release_port,
.request_port = bcm_uart_request_port,
.config_port = bcm_uart_config_port,
.verify_port = bcm_uart_verify_port,
};
#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE
static inline void wait_for_xmitr(struct uart_port *port)
{
unsigned int tmout;
/* Wait up to 10ms for the character(s) to be sent. */
tmout = 10000;
while (--tmout) {
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
if (val & UART_IR_STAT(UART_IR_TXEMPTY))
break;
udelay(1);
}
/* Wait up to 1s for flow control if necessary */
if (port->flags & UPF_CONS_FLOW) {
tmout = 1000000;
while (--tmout) {
unsigned int val;
val = bcm_uart_readl(port, UART_EXTINP_REG);
if (val & UART_EXTINP_CTS_MASK)
break;
udelay(1);
}
}
}
/*
* output given char
*/
static void bcm_console_putchar(struct uart_port *port, int ch)
{
wait_for_xmitr(port);
bcm_uart_writel(port, ch, UART_FIFO_REG);
}
/*
* console core request to output given string
*/
static void bcm_console_write(struct console *co, const char *s,
unsigned int count)
{
struct uart_port *port;
unsigned long flags;
int locked;
port = &ports[co->index];
local_irq_save(flags);
if (port->sysrq) {
/* bcm_uart_interrupt() already took the lock */
locked = 0;
} else if (oops_in_progress) {
locked = spin_trylock(&port->lock);
} else {
spin_lock(&port->lock);
locked = 1;
}
/* call helper to deal with \r\n */
uart_console_write(port, s, count, bcm_console_putchar);
/* and wait for char to be transmitted */
wait_for_xmitr(port);
if (locked)
spin_unlock(&port->lock);
local_irq_restore(flags);
}
/*
* console core request to setup given console, find matching uart
* port and setup it.
*/
static int bcm_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
if (co->index < 0 || co->index >= BCM63XX_NR_UARTS)
return -EINVAL;
port = &ports[co->index];
if (!port->membase)
return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(port, co, baud, parity, bits, flow);
}
static struct uart_driver bcm_uart_driver;
static struct console bcm63xx_console = {
.name = "ttyS",
.write = bcm_console_write,
.device = uart_console_device,
.setup = bcm_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &bcm_uart_driver,
};
static int __init bcm63xx_console_init(void)
{
register_console(&bcm63xx_console);
return 0;
}
console_initcall(bcm63xx_console_init);
#define BCM63XX_CONSOLE (&bcm63xx_console)
#else
#define BCM63XX_CONSOLE NULL
#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */
static struct uart_driver bcm_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "bcm63xx_uart",
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
.nr = BCM63XX_NR_UARTS,
.cons = BCM63XX_CONSOLE,
};
/*
* platform driver probe/remove callback
*/
static int bcm_uart_probe(struct platform_device *pdev)
{
struct resource *res_mem, *res_irq;
struct uart_port *port;
struct clk *clk;
int ret;
if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
return -EINVAL;
if (ports[pdev->id].membase)
return -EBUSY;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res_mem)
return -ENODEV;
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res_irq)
return -ENODEV;
clk = clk_get(&pdev->dev, "periph");
if (IS_ERR(clk))
return -ENODEV;
port = &ports[pdev->id];
memset(port, 0, sizeof(*port));
port->iotype = UPIO_MEM;
port->mapbase = res_mem->start;
port->irq = res_irq->start;
port->ops = &bcm_uart_ops;
port->flags = UPF_BOOT_AUTOCONF;
port->dev = &pdev->dev;
port->fifosize = 16;
port->uartclk = clk_get_rate(clk) / 2;
port->line = pdev->id;
clk_put(clk);
ret = uart_add_one_port(&bcm_uart_driver, port);
if (ret) {
ports[pdev->id].membase = 0;
return ret;
}
platform_set_drvdata(pdev, port);
return 0;
}
static int bcm_uart_remove(struct platform_device *pdev)
{
struct uart_port *port;
port = platform_get_drvdata(pdev);
uart_remove_one_port(&bcm_uart_driver, port);
/* mark port as free */
ports[pdev->id].membase = 0;
return 0;
}
/*
* platform driver stuff
*/
static struct platform_driver bcm_uart_platform_driver = {
.probe = bcm_uart_probe,
.remove = bcm_uart_remove,
.driver = {
.owner = THIS_MODULE,
.name = "bcm63xx_uart",
},
};
static int __init bcm_uart_init(void)
{
int ret;
ret = uart_register_driver(&bcm_uart_driver);
if (ret)
return ret;
ret = platform_driver_register(&bcm_uart_platform_driver);
if (ret)
uart_unregister_driver(&bcm_uart_driver);
return ret;
}
static void __exit bcm_uart_exit(void)
{
platform_driver_unregister(&bcm_uart_platform_driver);
uart_unregister_driver(&bcm_uart_driver);
}
module_init(bcm_uart_init);
module_exit(bcm_uart_exit);
MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink