mirror of https://gitee.com/openkylin/linux.git
1211 lines
24 KiB
Plaintext
1211 lines
24 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,gcc-msm8998.h>
|
|
#include <dt-bindings/clock/qcom,rpmcc.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
interrupt-parent = <&intc>;
|
|
|
|
qcom,msm-id = <292 0x0>;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
chosen { };
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
/* We expect the bootloader to fill in the reg */
|
|
reg = <0 0 0 0>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
memory@85800000 {
|
|
reg = <0x0 0x85800000 0x0 0x800000>;
|
|
no-map;
|
|
};
|
|
|
|
smem_mem: smem-mem@86000000 {
|
|
reg = <0x0 0x86000000 0x0 0x200000>;
|
|
no-map;
|
|
};
|
|
|
|
memory@86200000 {
|
|
reg = <0x0 0x86200000 0x0 0x2d00000>;
|
|
no-map;
|
|
};
|
|
|
|
rmtfs {
|
|
compatible = "qcom,rmtfs-mem";
|
|
|
|
size = <0x0 0x200000>;
|
|
alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
|
|
no-map;
|
|
|
|
qcom,client-id = <1>;
|
|
qcom,vmid = <15>;
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
xo: xo-board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
clock-output-names = "xo_board";
|
|
};
|
|
|
|
sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32764>;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
CPU0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,armv8";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2_0>;
|
|
L2_0: l2-cache {
|
|
compatible = "arm,arch-cache";
|
|
cache-level = <2>;
|
|
};
|
|
L1_I_0: l1-icache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
L1_D_0: l1-dcache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
};
|
|
|
|
CPU1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,armv8";
|
|
reg = <0x0 0x1>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2_0>;
|
|
L1_I_1: l1-icache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
L1_D_1: l1-dcache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
};
|
|
|
|
CPU2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,armv8";
|
|
reg = <0x0 0x2>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2_0>;
|
|
L1_I_2: l1-icache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
L1_D_2: l1-dcache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
};
|
|
|
|
CPU3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,armv8";
|
|
reg = <0x0 0x3>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2_0>;
|
|
L1_I_3: l1-icache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
L1_D_3: l1-dcache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
};
|
|
|
|
CPU4: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,armv8";
|
|
reg = <0x0 0x100>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2_1>;
|
|
L2_1: l2-cache {
|
|
compatible = "arm,arch-cache";
|
|
cache-level = <2>;
|
|
};
|
|
L1_I_100: l1-icache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
L1_D_100: l1-dcache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
};
|
|
|
|
CPU5: cpu@101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,armv8";
|
|
reg = <0x0 0x101>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2_1>;
|
|
L1_I_101: l1-icache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
L1_D_101: l1-dcache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
};
|
|
|
|
CPU6: cpu@102 {
|
|
device_type = "cpu";
|
|
compatible = "arm,armv8";
|
|
reg = <0x0 0x102>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2_1>;
|
|
L1_I_102: l1-icache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
L1_D_102: l1-dcache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
};
|
|
|
|
CPU7: cpu@103 {
|
|
device_type = "cpu";
|
|
compatible = "arm,armv8";
|
|
reg = <0x0 0x103>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&L2_1>;
|
|
L1_I_103: l1-icache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
L1_D_103: l1-dcache {
|
|
compatible = "arm,arch-cache";
|
|
};
|
|
};
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&CPU0>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU1>;
|
|
};
|
|
|
|
core2 {
|
|
cpu = <&CPU2>;
|
|
};
|
|
|
|
core3 {
|
|
cpu = <&CPU3>;
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
cpu = <&CPU4>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&CPU5>;
|
|
};
|
|
|
|
core2 {
|
|
cpu = <&CPU6>;
|
|
};
|
|
|
|
core3 {
|
|
cpu = <&CPU7>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
scm {
|
|
compatible = "qcom,scm-msm8998", "qcom,scm";
|
|
};
|
|
};
|
|
|
|
tcsr_mutex: hwlock {
|
|
compatible = "qcom,tcsr-mutex";
|
|
syscon = <&tcsr_mutex_regs 0 0x1000>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
|
|
rpm-glink {
|
|
compatible = "qcom,glink-rpm";
|
|
|
|
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
|
|
qcom,rpm-msg-ram = <&rpm_msg_ram>;
|
|
mboxes = <&apcs_glb 0>;
|
|
|
|
rpm_requests: rpm-requests {
|
|
compatible = "qcom,rpm-msm8998";
|
|
qcom,glink-channels = "rpm_requests";
|
|
|
|
rpmcc: clock-controller {
|
|
compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
smem {
|
|
compatible = "qcom,smem";
|
|
memory-region = <&smem_mem>;
|
|
hwlocks = <&tcsr_mutex 3>;
|
|
};
|
|
|
|
smp2p-lpass {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <443>, <429>;
|
|
|
|
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
mboxes = <&apcs_glb 10>;
|
|
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <2>;
|
|
|
|
adsp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
adsp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smp2p-mpss {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <435>, <428>;
|
|
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&apcs_glb 14>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <1>;
|
|
|
|
modem_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smp2p-slpi {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <481>, <430>;
|
|
interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&apcs_glb 26>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <3>;
|
|
|
|
slpi_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
slpi_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu0-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 1>;
|
|
|
|
trips {
|
|
cpu0_alert0: trip-point@0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu0_crit: cpu_crit {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu1-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 2>;
|
|
|
|
trips {
|
|
cpu1_alert0: trip-point@0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu1_crit: cpu_crit {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu2-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 3>;
|
|
|
|
trips {
|
|
cpu2_alert0: trip-point@0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu2_crit: cpu_crit {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu3-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 4>;
|
|
|
|
trips {
|
|
cpu3_alert0: trip-point@0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu3_crit: cpu_crit {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu4-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 7>;
|
|
|
|
trips {
|
|
cpu4_alert0: trip-point@0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu4_crit: cpu_crit {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu5-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 8>;
|
|
|
|
trips {
|
|
cpu5_alert0: trip-point@0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu5_crit: cpu_crit {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu6-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 9>;
|
|
|
|
trips {
|
|
cpu6_alert0: trip-point@0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu6_crit: cpu_crit {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu7-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 10>;
|
|
|
|
trips {
|
|
cpu7_alert0: trip-point@0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu7_crit: cpu_crit {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
gpu-thermal-bottom {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 12>;
|
|
|
|
trips {
|
|
gpu1_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
gpu-thermal-top {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 13>;
|
|
|
|
trips {
|
|
gpu2_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
clust0-mhm-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 5>;
|
|
|
|
trips {
|
|
cluster0_mhm_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
clust1-mhm-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 6>;
|
|
|
|
trips {
|
|
cluster1_mhm_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
cluster1-l2-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens0 11>;
|
|
|
|
trips {
|
|
cluster1_l2_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
modem-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens1 1>;
|
|
|
|
trips {
|
|
modem_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
mem-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens1 2>;
|
|
|
|
trips {
|
|
mem_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
wlan-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens1 3>;
|
|
|
|
trips {
|
|
wlan_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
q6-dsp-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens1 4>;
|
|
|
|
trips {
|
|
q6_dsp_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
camera-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens1 5>;
|
|
|
|
trips {
|
|
camera_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
multimedia-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens1 6>;
|
|
|
|
trips {
|
|
multimedia_alert0: trip-point@0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0 0xffffffff>;
|
|
compatible = "simple-bus";
|
|
|
|
rpm_msg_ram: memory@68000 {
|
|
compatible = "qcom,rpm-msg-ram";
|
|
reg = <0x778000 0x7000>;
|
|
};
|
|
|
|
qfprom: qfprom@780000 {
|
|
compatible = "qcom,qfprom";
|
|
reg = <0x780000 0x621c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
qusb2_hstx_trim: hstx-trim@423a {
|
|
reg = <0x423a 0x1>;
|
|
bits = <0 4>;
|
|
};
|
|
};
|
|
|
|
gcc: clock-controller@100000 {
|
|
compatible = "qcom,gcc-msm8998";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
reg = <0x100000 0xb0000>;
|
|
};
|
|
|
|
tlmm: pinctrl@3400000 {
|
|
compatible = "qcom,msm8998-pinctrl";
|
|
reg = <0x3400000 0xc00000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <0x2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <0x2>;
|
|
};
|
|
|
|
spmi_bus: spmi@800f000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg = <0x800f000 0x1000>,
|
|
<0x8400000 0x1000000>,
|
|
<0x9400000 0x1000000>,
|
|
<0xa400000 0x220000>,
|
|
<0x800a000 0x3000>;
|
|
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
|
|
interrupt-names = "periph_irq";
|
|
interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
|
|
qcom,ee = <0>;
|
|
qcom,channel = <0>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
cell-index = <0>;
|
|
};
|
|
|
|
tsens0: thermal@10ab000 {
|
|
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
|
|
reg = <0x10ab000 0x1000>, /* TM */
|
|
<0x10aa000 0x1000>; /* SROT */
|
|
|
|
#qcom,sensors = <14>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
tsens1: thermal@10ae000 {
|
|
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
|
|
reg = <0x10ae000 0x1000>, /* TM */
|
|
<0x10ad000 0x1000>; /* SROT */
|
|
|
|
#qcom,sensors = <8>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
tcsr_mutex_regs: syscon@1f40000 {
|
|
compatible = "syscon";
|
|
reg = <0x1f40000 0x20000>;
|
|
};
|
|
|
|
apcs_glb: mailbox@9820000 {
|
|
compatible = "qcom,msm8998-apcs-hmss-global";
|
|
reg = <0x17911000 0x1000>;
|
|
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
usb3: usb@a8f8800 {
|
|
compatible = "qcom,msm8998-dwc3", "qcom,dwc3";
|
|
reg = <0x0a8f8800 0x400>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
|
|
<&gcc GCC_USB30_MASTER_CLK>,
|
|
<&gcc GCC_AGGRE1_USB3_AXI_CLK>,
|
|
<&gcc GCC_USB30_MOCK_UTMI_CLK>,
|
|
<&gcc GCC_USB30_SLEEP_CLK>;
|
|
clock-names = "cfg_noc", "core", "iface", "mock_utmi",
|
|
"sleep";
|
|
|
|
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
|
|
<&gcc GCC_USB30_MASTER_CLK>;
|
|
assigned-clock-rates = <19200000>, <120000000>;
|
|
|
|
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hs_phy_irq", "ss_phy_irq";
|
|
|
|
power-domains = <&gcc USB_30_GDSC>;
|
|
|
|
resets = <&gcc GCC_USB_30_BCR>;
|
|
|
|
usb3_dwc3: dwc3@a800000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x0a800000 0xcd00>;
|
|
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,dis_enblslpm_quirk;
|
|
phys = <&qusb2phy>, <&usb1_ssphy>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
snps,has-lpm-erratum;
|
|
snps,hird-threshold = /bits/ 8 <0x10>;
|
|
};
|
|
};
|
|
|
|
usb3phy: phy@c010000 {
|
|
compatible = "qcom,msm8998-qmp-usb3-phy";
|
|
reg = <0x0c010000 0x18c>;
|
|
status = "disabled";
|
|
#clock-cells = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
|
|
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
|
|
<&gcc GCC_USB3_CLKREF_CLK>;
|
|
clock-names = "aux", "cfg_ahb", "ref";
|
|
|
|
resets = <&gcc GCC_USB3_PHY_BCR>,
|
|
<&gcc GCC_USB3PHY_PHY_BCR>;
|
|
reset-names = "phy", "common";
|
|
|
|
usb1_ssphy: lane@c010200 {
|
|
reg = <0xc010200 0x128>,
|
|
<0xc010400 0x200>,
|
|
<0xc010c00 0x20c>,
|
|
<0xc010600 0x128>,
|
|
<0xc010800 0x200>;
|
|
#phy-cells = <0>;
|
|
clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
|
|
clock-names = "pipe0";
|
|
clock-output-names = "usb3_phy_pipe_clk_src";
|
|
};
|
|
};
|
|
|
|
qusb2phy: phy@c012000 {
|
|
compatible = "qcom,msm8998-qusb2-phy";
|
|
reg = <0x0c012000 0x2a8>;
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
|
|
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
|
|
<&gcc GCC_RX1_USB2_CLKREF_CLK>;
|
|
clock-names = "cfg_ahb", "ref";
|
|
|
|
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
|
|
|
|
nvmem-cells = <&qusb2_hstx_trim>;
|
|
};
|
|
|
|
sdhc2: sdhci@c0a4900 {
|
|
compatible = "qcom,sdhci-msm-v4";
|
|
reg = <0xc0a4900 0x314>, <0xc0a4000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
|
|
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
|
|
clock-names = "iface", "core", "xo";
|
|
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
|
|
<&gcc GCC_SDCC2_APPS_CLK>,
|
|
<&xo>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_i2c1: i2c@c175000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c175000 0x600>;
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp1_i2c2: i2c@c176000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c176000 0x600>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp1_i2c3: i2c@c177000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c177000 0x600>;
|
|
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp1_i2c4: i2c@c178000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c178000 0x600>;
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp1_i2c5: i2c@c179000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c179000 0x600>;
|
|
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp1_i2c6: i2c@c17a000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c17a000 0x600>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp2_i2c0: i2c@c1b5000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c1b5000 0x600>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp2_i2c1: i2c@c1b6000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c1b6000 0x600>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp2_i2c2: i2c@c1b7000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c1b7000 0x600>;
|
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp2_i2c3: i2c@c1b8000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c1b8000 0x600>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp2_i2c4: i2c@c1b9000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c1b9000 0x600>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp2_i2c5: i2c@c1ba000 {
|
|
compatible = "qcom,i2c-qup-v2.2.1";
|
|
reg = <0x0c1ba000 0x600>;
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
|
|
<&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
clock-frequency = <400000>;
|
|
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp2_uart1: serial@c1b0000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0xc1b0000 0x1000>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
|
|
<&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@17920000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0x17920000 0x1000>;
|
|
|
|
frame@17921000 {
|
|
frame-number = <0>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17921000 0x1000>,
|
|
<0x17922000 0x1000>;
|
|
};
|
|
|
|
frame@17923000 {
|
|
frame-number = <1>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17923000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17924000 {
|
|
frame-number = <2>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17924000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17925000 {
|
|
frame-number = <3>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17925000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17926000 {
|
|
frame-number = <4>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17926000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17927000 {
|
|
frame-number = <5>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17927000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17928000 {
|
|
frame-number = <6>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x17928000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@17a00000 {
|
|
compatible = "arm,gic-v3";
|
|
reg = <0x17a00000 0x10000>, /* GICD */
|
|
<0x17b00000 0x100000>; /* GICR * 8 */
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
interrupt-controller;
|
|
#redistributor-regions = <1>;
|
|
redistributor-stride = <0x0 0x20000>;
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
ufshc: ufshc@1da4000 {
|
|
compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
|
|
reg = <0x01da4000 0x2500>;
|
|
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&ufsphy_lanes>;
|
|
phy-names = "ufsphy";
|
|
lanes-per-direction = <2>;
|
|
power-domains = <&gcc UFS_GDSC>;
|
|
#reset-cells = <1>;
|
|
|
|
clock-names =
|
|
"core_clk",
|
|
"bus_aggr_clk",
|
|
"iface_clk",
|
|
"core_clk_unipro",
|
|
"ref_clk",
|
|
"tx_lane0_sync_clk",
|
|
"rx_lane0_sync_clk",
|
|
"rx_lane1_sync_clk";
|
|
clocks =
|
|
<&gcc GCC_UFS_AXI_CLK>,
|
|
<&gcc GCC_AGGRE1_UFS_AXI_CLK>,
|
|
<&gcc GCC_UFS_AHB_CLK>,
|
|
<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
|
|
<&rpmcc RPM_SMD_LN_BB_CLK1>,
|
|
<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
|
|
<&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
|
|
<&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
|
|
freq-table-hz =
|
|
<50000000 200000000>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<37500000 150000000>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<0 0>;
|
|
|
|
resets = <&gcc GCC_UFS_BCR>;
|
|
reset-names = "rst";
|
|
};
|
|
|
|
ufsphy: phy@1da7000 {
|
|
compatible = "qcom,msm8998-qmp-ufs-phy";
|
|
reg = <0x01da7000 0x18c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clock-names =
|
|
"ref",
|
|
"ref_aux";
|
|
clocks =
|
|
<&gcc GCC_UFS_CLKREF_CLK>,
|
|
<&gcc GCC_UFS_PHY_AUX_CLK>;
|
|
|
|
reset-names = "ufsphy";
|
|
resets = <&ufshc 0>;
|
|
|
|
ufsphy_lanes: lanes@1da7400 {
|
|
reg = <0x01da7400 0x128>,
|
|
<0x01da7600 0x1fc>,
|
|
<0x01da7c00 0x1dc>,
|
|
<0x01da7800 0x128>,
|
|
<0x01da7a00 0x1fc>;
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "msm8998-pins.dtsi"
|