linux/arch/arm/mach-omap1
Linus Torvalds 5e090ed7af ARM: soc: late platform updates
This branch contains updates to OMAP and Marvell platforms (kirkwood,
 dove, mvebu) that came in after we had done the big multiplatform merges,
 so they were kept separate from the rest, and not separated into the
 traditional topics of cleanup/driver/platform features.
 
 For OMAP, the updates are:
 - Runtime PM conversions for the GPMC and RNG IP blocks
 - Preparation patches for the OMAP common clock framework conversion
 - clkdev alias additions required by other drivers
 - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4
 - OMAP hwmod code and data improvements
 - Preparation patches for the IOMMU runtime PM conversion
 - Preparation patches for OMAP4 full-chip retention support
 
 For Kirkwood/Dove/mvebu:
 
 - New driver for "address decoder controller" for mvebu, which
   is a piece of hardware that configures addressable devices and
   peripherals. First user is the boot rom aperture on armada XP since
   it is needed for SMP support.
 - New device tree bindings for peripherals such as gpio-fan, iconnect
   nand, mv_cesa and the above address decoder controller.
 - Some defconfig updates, mostly to enable new DT boards and a few drivers.
 - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu
 - New clean gpio driver for mvebu
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQblIiAAoJEIwa5zzehBx3J1EP/1pxMqjVKQDXxak+A6g8a7r0
 hUTjqfiA9nZ4st+nk3PKJL9DNkoTEoZZqXghYRA+N6ej4hAaFJX1izgQDtjtjfRE
 s2izZuxGka8Oiic6FpCUoQnMORg10tSLgyvlHNW4hXy3qpe2C4u1D2GJwA/GPeLQ
 lHREekcJ3RKWutpG2hMtCT+9Bm4AwnnMY5uO39gxoXeMn6RoaACNIyYxz0NeL5bV
 GDuawi7Pc4KJTXX+D/VU0o7VtksiUO8YBczFEra/9khSL/RI2PFalIX3DKiioqvA
 yUA11d9proqojIdfdjVRPBHnIMl49H8ohBwbQfKnkNz9msl1BKN5PbakKls97mQ+
 vaJpoACnc/3x4P/izEpwry5XqeIl5S5mwz4R4+fojpWpp4JPcly/cAKMAsXf5WRi
 NF50E4D/8ysHE8WuBU5YHFgEEbn3nXkRbNMgdYtUwzixdmNJNaU8+33BJo34c4j0
 DNktiEdKUBoiiEdsC1MgH86olD/sFNUxvXBub30hhOywoapgQE61fGQGxG38DV/K
 kspTHz9SKUrmgbYEyMNOhz4paRrheYxx9cAgKP7Hp7m4Gu8d6ZqRqLqN9hbAbLuW
 TbH2FpqcjSw4KnYYCepTixJ3dhGiICiILWHfsW3qCj5Le3YVwedCpBCL1/I+RqEP
 kYTToVhur/T1yamHAmBi
 =xVaJ
 -----END PGP SIGNATURE-----

Merge tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull late ARM soc platform updates from Olof Johansson:
 "This branch contains updates to OMAP and Marvell platforms (kirkwood,
  dove, mvebu) that came in after we had done the big multiplatform
  merges, so they were kept separate from the rest, and not separated
  into the traditional topics of cleanup/driver/platform features.

  For OMAP, the updates are:
   - Runtime PM conversions for the GPMC and RNG IP blocks
   - Preparation patches for the OMAP common clock framework conversion
   - clkdev alias additions required by other drivers
   - Performance Monitoring Unit (PMU) support for OMAP2, 3, and
     non-4430 OMAP4
   - OMAP hwmod code and data improvements
   - Preparation patches for the IOMMU runtime PM conversion
   - Preparation patches for OMAP4 full-chip retention support

  For Kirkwood/Dove/mvebu:
   - New driver for "address decoder controller" for mvebu, which is a
     piece of hardware that configures addressable devices and
     peripherals.  First user is the boot rom aperture on armada XP
     since it is needed for SMP support.
   - New device tree bindings for peripherals such as gpio-fan, iconnect
     nand, mv_cesa and the above address decoder controller.
   - Some defconfig updates, mostly to enable new DT boards and a few
     drivers.
   - New drivers using the pincontrol subsystem for dove, kirkwood and
     mvebu
   - New clean gpio driver for mvebu"

* tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits)
  ARM: mvebu: fix build breaks from multi-platform conversion
  ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70
  ARM: OMAP2+: PMU: Add runtime PM support
  ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD
  ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD
  ARM: OMAP3: hwmod data: Add debugss HWMOD data
  ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems
  ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP
  hwrng: OMAP: remove SoC restrictions from driver registration
  ARM: OMAP: split OMAP1, OMAP2+ RNG device registration
  hwrng: OMAP: convert to use runtime PM
  hwrng: OMAP: store per-device data in per-device variables, not file statics
  ARM: OMAP2xxx: hwmod/CM: add RNG integration data
  ARM: OMAP2+: gpmc: minimal driver support
  ARM: OMAP2+: gpmc: Adapt to HWMOD
  ARM: OMAP2/3: hwmod data: add gpmc
  ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp
  ARM: OMAP3: hwmod data: add mmu data for iva and isp
  ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected
  ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks
  ...
2012-10-07 20:55:16 +09:00
..
include/mach ARM: OMAP1: Move irda.h from plat to mach 2012-09-20 15:03:58 -07:00
Kconfig ARM: OMAP1: fix compilation issue in board-sx1.c 2012-05-08 17:16:24 -07:00
Makefile ARM: mach-omap1: retire custom LED code 2012-08-01 11:22:13 +08:00
Makefile.boot ARM: 7022/1: allow to detect conflicting zreladdrs 2011-10-17 09:12:40 +01:00
ams-delta-fiq-handler.S ARM: OMAP1: Move board-ams-delta.h from plat to mach 2012-09-20 15:02:19 -07:00
ams-delta-fiq.c ARM: OMAP1: Move board-ams-delta.h from plat to mach 2012-09-20 15:02:19 -07:00
board-ams-delta.c ARM: OMAP1: Move board-ams-delta.h from plat to mach 2012-09-20 15:02:19 -07:00
board-fsample.c ARM: OMAP1: Move flash.h from plat to mach 2012-09-20 15:02:47 -07:00
board-generic.c ARM: OMAP1: Make plat/mux.h omap1 only 2012-09-20 14:54:57 -07:00
board-h2-mmc.c ARM: omap: remove mmc platform data dma_mask and initialization 2012-07-31 12:06:23 +01:00
board-h2.c ARM: soc: driver specific changes 2012-10-01 18:46:13 -07:00
board-h2.h ARM: OMAP: No need to include board-h2.h from hardware.h 2009-03-23 18:07:33 -07:00
board-h3-mmc.c ARM: omap: remove mmc platform data dma_mask and initialization 2012-07-31 12:06:23 +01:00
board-h3.c ARM: soc: driver specific changes 2012-10-01 18:46:13 -07:00
board-h3.h ARM: OMAP: No need to include board-h3.h from hardware.h 2009-03-23 18:07:33 -07:00
board-htcherald.c These fixes are needed to fix non-omap build breakage for 2012-09-23 17:15:44 -06:00
board-innovator.c ARM: OMAP1: Move flash.h from plat to mach 2012-09-20 15:02:47 -07:00
board-nand.c ARM: OMAP1: board files: deduplicate and clean some NAND-related code 2012-04-13 06:34:31 -06:00
board-nokia770.c ARM: OMAP1: Make plat/mux.h omap1 only 2012-09-20 14:54:57 -07:00
board-osk.c ARM: soc: driver specific changes 2012-10-01 18:46:13 -07:00
board-palmte.c ARM: OMAP1: Move irda.h from plat to mach 2012-09-20 15:03:58 -07:00
board-palmtt.c ARM: OMAP1: Move irda.h from plat to mach 2012-09-20 15:03:58 -07:00
board-palmz71.c ARM: OMAP1: Move irda.h from plat to mach 2012-09-20 15:03:58 -07:00
board-perseus2.c ARM: OMAP1: Move flash.h from plat to mach 2012-09-20 15:02:47 -07:00
board-sx1-mmc.c ARM: OMAP1: Move board-sx1.h from plat to mach 2012-09-20 15:02:38 -07:00
board-sx1.c ARM: OMAP1: Move irda.h from plat to mach 2012-09-20 15:03:58 -07:00
board-voiceblue.c ARM: OMAP1: Move flash.h from plat to mach 2012-09-20 15:02:47 -07:00
clock.c ARM: OMAP: unwrap strings 2012-09-12 02:57:10 -06:00
clock.h ARM: OMAP1: Move dpll1 rates selection from config to runtime 2011-12-08 18:02:23 -08:00
clock_data.c These fixes are needed to fix non-omap build breakage for 2012-09-23 17:15:44 -06:00
common.h arm-soc: sweeping late_initcall cleanup 2012-05-26 13:14:01 -07:00
devices.c Merge branch 'late/kirkwood' into late/soc 2012-10-04 20:17:25 -07:00
dma.c These fixes are needed to fix non-omap build breakage for 2012-09-23 17:15:44 -06:00
flash.c ARM: OMAP1: Move flash.h from plat to mach 2012-09-20 15:02:47 -07:00
fpga.c ARM: OMAP2+: declare file-local functions as static 2012-04-13 06:34:26 -06:00
gpio7xx.c ARM: OMAP: Move gpio.h to include/linux/platform_data 2012-09-12 18:06:30 -07:00
gpio15xx.c ARM: OMAP: Move gpio.h to include/linux/platform_data 2012-09-12 18:06:30 -07:00
gpio16xx.c ARM: OMAP: Move gpio.h to include/linux/platform_data 2012-09-12 18:06:30 -07:00
i2c.c ARM: OMAP1: Make plat/mux.h omap1 only 2012-09-20 14:54:57 -07:00
id.c ARM: OMAP: add includes for missing prototypes 2012-04-13 06:34:26 -06:00
io.c ARM: OMAP1: Make plat/mux.h omap1 only 2012-09-20 14:54:57 -07:00
iomap.h ARM: create a common IOMEM definition 2012-03-13 21:22:09 -05:00
irq.c ARM: OMAP: add includes for missing prototypes 2012-04-13 06:34:26 -06:00
lcd_dma.c ARM: OMAP: unwrap strings 2012-09-12 02:57:10 -06:00
mailbox.c arm: fix implicit module.h users by adding it to arch/arm as required. 2011-10-31 19:30:50 -04:00
mcbsp.c ARM: OMAP1: Make plat/mux.h omap1 only 2012-09-20 14:54:57 -07:00
mux.c ARM: OMAP1: Make plat/mux.h omap1 only 2012-09-20 14:54:57 -07:00
ocpi.c ARM: OMAP1: OCPI: move to mach-omap1/ 2012-04-13 06:34:27 -06:00
opp.h ARM: OMAP1: Move dpll1 rates selection from config to runtime 2011-12-08 18:02:23 -08:00
opp_data.c ARM: OMAP1: Move dpll1 rates selection from config to runtime 2011-12-08 18:02:23 -08:00
pm.c ARM: OMAP1: Make plat/mux.h omap1 only 2012-09-20 14:54:57 -07:00
pm.h ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM 2011-02-04 14:26:08 +00:00
pm_bus.c PM: Move clock-related definitions and headers to separate file 2011-08-25 15:34:19 +02:00
reset.c ARM: OMAP: add includes for missing prototypes 2012-04-13 06:34:26 -06:00
serial.c ARM: OMAP1: Make plat/mux.h omap1 only 2012-09-20 14:54:57 -07:00
sleep.S ARM: OMAP: Remove remaining includes for mach/io.h 2012-03-06 21:34:38 -06:00
sram.S ARM: OMAP: Remove remaining includes for mach/io.h 2012-03-06 21:34:38 -06:00
time.c ARM: mach-omap1: retire custom LED code 2012-08-01 11:22:13 +08:00
timer.c ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP 2012-09-23 17:28:27 -06:00
timer32k.c ARM: mach-omap1: retire custom LED code 2012-08-01 11:22:13 +08:00
usb.c ARM: OMAP1: Make plat/mux.h omap1 only 2012-09-20 14:54:57 -07:00