mirror of https://gitee.com/openkylin/linux.git
405 lines
10 KiB
C
405 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Qualcomm External Bus Interface 2 (EBI2) driver
|
|
* an older version of the Qualcomm Parallel Interface Controller (QPIC)
|
|
*
|
|
* Copyright (C) 2016 Linaro Ltd.
|
|
*
|
|
* Author: Linus Walleij <linus.walleij@linaro.org>
|
|
*
|
|
* See the device tree bindings for this block for more details on the
|
|
* hardware.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/bitops.h>
|
|
|
|
/*
|
|
* CS0, CS1, CS4 and CS5 are two bits wide, CS2 and CS3 are one bit.
|
|
*/
|
|
#define EBI2_CS0_ENABLE_MASK BIT(0)|BIT(1)
|
|
#define EBI2_CS1_ENABLE_MASK BIT(2)|BIT(3)
|
|
#define EBI2_CS2_ENABLE_MASK BIT(4)
|
|
#define EBI2_CS3_ENABLE_MASK BIT(5)
|
|
#define EBI2_CS4_ENABLE_MASK BIT(6)|BIT(7)
|
|
#define EBI2_CS5_ENABLE_MASK BIT(8)|BIT(9)
|
|
#define EBI2_CSN_MASK GENMASK(9, 0)
|
|
|
|
#define EBI2_XMEM_CFG 0x0000 /* Power management etc */
|
|
|
|
/*
|
|
* SLOW CSn CFG
|
|
*
|
|
* Bits 31-28: RECOVERY recovery cycles (0 = 1, 1 = 2 etc) this is the time the
|
|
* memory continues to drive the data bus after OE is de-asserted.
|
|
* Inserted when reading one CS and switching to another CS or read
|
|
* followed by write on the same CS. Valid values 0 thru 15.
|
|
* Bits 27-24: WR_HOLD write hold cycles, these are extra cycles inserted after
|
|
* every write minimum 1. The data out is driven from the time WE is
|
|
* asserted until CS is asserted. With a hold of 1, the CS stays
|
|
* active for 1 extra cycle etc. Valid values 0 thru 15.
|
|
* Bits 23-16: WR_DELTA initial latency for write cycles inserted for the first
|
|
* write to a page or burst memory
|
|
* Bits 15-8: RD_DELTA initial latency for read cycles inserted for the first
|
|
* read to a page or burst memory
|
|
* Bits 7-4: WR_WAIT number of wait cycles for every write access, 0=1 cycle
|
|
* so 1 thru 16 cycles.
|
|
* Bits 3-0: RD_WAIT number of wait cycles for every read access, 0=1 cycle
|
|
* so 1 thru 16 cycles.
|
|
*/
|
|
#define EBI2_XMEM_CS0_SLOW_CFG 0x0008
|
|
#define EBI2_XMEM_CS1_SLOW_CFG 0x000C
|
|
#define EBI2_XMEM_CS2_SLOW_CFG 0x0010
|
|
#define EBI2_XMEM_CS3_SLOW_CFG 0x0014
|
|
#define EBI2_XMEM_CS4_SLOW_CFG 0x0018
|
|
#define EBI2_XMEM_CS5_SLOW_CFG 0x001C
|
|
|
|
#define EBI2_XMEM_RECOVERY_SHIFT 28
|
|
#define EBI2_XMEM_WR_HOLD_SHIFT 24
|
|
#define EBI2_XMEM_WR_DELTA_SHIFT 16
|
|
#define EBI2_XMEM_RD_DELTA_SHIFT 8
|
|
#define EBI2_XMEM_WR_WAIT_SHIFT 4
|
|
#define EBI2_XMEM_RD_WAIT_SHIFT 0
|
|
|
|
/*
|
|
* FAST CSn CFG
|
|
* Bits 31-28: ?
|
|
* Bits 27-24: RD_HOLD: the length in cycles of the first segment of a read
|
|
* transfer. For a single read trandfer this will be the time
|
|
* from CS assertion to OE assertion.
|
|
* Bits 18-24: ?
|
|
* Bits 17-16: ADV_OE_RECOVERY, the number of cycles elapsed before an OE
|
|
* assertion, with respect to the cycle where ADV is asserted.
|
|
* 2 means 2 cycles between ADV and OE. Values 0, 1, 2 or 3.
|
|
* Bits 5: ADDR_HOLD_ENA, The address is held for an extra cycle to meet
|
|
* hold time requirements with ADV assertion.
|
|
*
|
|
* The manual mentions "write precharge cycles" and "precharge cycles".
|
|
* We have not been able to figure out which bit fields these correspond to
|
|
* in the hardware, or what valid values exist. The current hypothesis is that
|
|
* this is something just used on the FAST chip selects. There is also a "byte
|
|
* device enable" flag somewhere for 8bit memories.
|
|
*/
|
|
#define EBI2_XMEM_CS0_FAST_CFG 0x0028
|
|
#define EBI2_XMEM_CS1_FAST_CFG 0x002C
|
|
#define EBI2_XMEM_CS2_FAST_CFG 0x0030
|
|
#define EBI2_XMEM_CS3_FAST_CFG 0x0034
|
|
#define EBI2_XMEM_CS4_FAST_CFG 0x0038
|
|
#define EBI2_XMEM_CS5_FAST_CFG 0x003C
|
|
|
|
#define EBI2_XMEM_RD_HOLD_SHIFT 24
|
|
#define EBI2_XMEM_ADV_OE_RECOVERY_SHIFT 16
|
|
#define EBI2_XMEM_ADDR_HOLD_ENA_SHIFT 5
|
|
|
|
/**
|
|
* struct cs_data - struct with info on a chipselect setting
|
|
* @enable_mask: mask to enable the chipselect in the EBI2 config
|
|
* @slow_cfg0: offset to XMEMC slow CS config
|
|
* @fast_cfg1: offset to XMEMC fast CS config
|
|
*/
|
|
struct cs_data {
|
|
u32 enable_mask;
|
|
u16 slow_cfg;
|
|
u16 fast_cfg;
|
|
};
|
|
|
|
static const struct cs_data cs_info[] = {
|
|
{
|
|
/* CS0 */
|
|
.enable_mask = EBI2_CS0_ENABLE_MASK,
|
|
.slow_cfg = EBI2_XMEM_CS0_SLOW_CFG,
|
|
.fast_cfg = EBI2_XMEM_CS0_FAST_CFG,
|
|
},
|
|
{
|
|
/* CS1 */
|
|
.enable_mask = EBI2_CS1_ENABLE_MASK,
|
|
.slow_cfg = EBI2_XMEM_CS1_SLOW_CFG,
|
|
.fast_cfg = EBI2_XMEM_CS1_FAST_CFG,
|
|
},
|
|
{
|
|
/* CS2 */
|
|
.enable_mask = EBI2_CS2_ENABLE_MASK,
|
|
.slow_cfg = EBI2_XMEM_CS2_SLOW_CFG,
|
|
.fast_cfg = EBI2_XMEM_CS2_FAST_CFG,
|
|
},
|
|
{
|
|
/* CS3 */
|
|
.enable_mask = EBI2_CS3_ENABLE_MASK,
|
|
.slow_cfg = EBI2_XMEM_CS3_SLOW_CFG,
|
|
.fast_cfg = EBI2_XMEM_CS3_FAST_CFG,
|
|
},
|
|
{
|
|
/* CS4 */
|
|
.enable_mask = EBI2_CS4_ENABLE_MASK,
|
|
.slow_cfg = EBI2_XMEM_CS4_SLOW_CFG,
|
|
.fast_cfg = EBI2_XMEM_CS4_FAST_CFG,
|
|
},
|
|
{
|
|
/* CS5 */
|
|
.enable_mask = EBI2_CS5_ENABLE_MASK,
|
|
.slow_cfg = EBI2_XMEM_CS5_SLOW_CFG,
|
|
.fast_cfg = EBI2_XMEM_CS5_FAST_CFG,
|
|
},
|
|
};
|
|
|
|
/**
|
|
* struct ebi2_xmem_prop - describes an XMEM config property
|
|
* @prop: the device tree binding name
|
|
* @max: maximum value for the property
|
|
* @slowreg: true if this property is in the SLOW CS config register
|
|
* else it is assumed to be in the FAST config register
|
|
* @shift: the bit field start in the SLOW or FAST register for this
|
|
* property
|
|
*/
|
|
struct ebi2_xmem_prop {
|
|
const char *prop;
|
|
u32 max;
|
|
bool slowreg;
|
|
u16 shift;
|
|
};
|
|
|
|
static const struct ebi2_xmem_prop xmem_props[] = {
|
|
{
|
|
.prop = "qcom,xmem-recovery-cycles",
|
|
.max = 15,
|
|
.slowreg = true,
|
|
.shift = EBI2_XMEM_RECOVERY_SHIFT,
|
|
},
|
|
{
|
|
.prop = "qcom,xmem-write-hold-cycles",
|
|
.max = 15,
|
|
.slowreg = true,
|
|
.shift = EBI2_XMEM_WR_HOLD_SHIFT,
|
|
},
|
|
{
|
|
.prop = "qcom,xmem-write-delta-cycles",
|
|
.max = 255,
|
|
.slowreg = true,
|
|
.shift = EBI2_XMEM_WR_DELTA_SHIFT,
|
|
},
|
|
{
|
|
.prop = "qcom,xmem-read-delta-cycles",
|
|
.max = 255,
|
|
.slowreg = true,
|
|
.shift = EBI2_XMEM_RD_DELTA_SHIFT,
|
|
},
|
|
{
|
|
.prop = "qcom,xmem-write-wait-cycles",
|
|
.max = 15,
|
|
.slowreg = true,
|
|
.shift = EBI2_XMEM_WR_WAIT_SHIFT,
|
|
},
|
|
{
|
|
.prop = "qcom,xmem-read-wait-cycles",
|
|
.max = 15,
|
|
.slowreg = true,
|
|
.shift = EBI2_XMEM_RD_WAIT_SHIFT,
|
|
},
|
|
{
|
|
.prop = "qcom,xmem-address-hold-enable",
|
|
.max = 1, /* boolean prop */
|
|
.slowreg = false,
|
|
.shift = EBI2_XMEM_ADDR_HOLD_ENA_SHIFT,
|
|
},
|
|
{
|
|
.prop = "qcom,xmem-adv-to-oe-recovery-cycles",
|
|
.max = 3,
|
|
.slowreg = false,
|
|
.shift = EBI2_XMEM_ADV_OE_RECOVERY_SHIFT,
|
|
},
|
|
{
|
|
.prop = "qcom,xmem-read-hold-cycles",
|
|
.max = 15,
|
|
.slowreg = false,
|
|
.shift = EBI2_XMEM_RD_HOLD_SHIFT,
|
|
},
|
|
};
|
|
|
|
static void qcom_ebi2_setup_chipselect(struct device_node *np,
|
|
struct device *dev,
|
|
void __iomem *ebi2_base,
|
|
void __iomem *ebi2_xmem,
|
|
u32 csindex)
|
|
{
|
|
const struct cs_data *csd;
|
|
u32 slowcfg, fastcfg;
|
|
u32 val;
|
|
int ret;
|
|
int i;
|
|
|
|
csd = &cs_info[csindex];
|
|
val = readl(ebi2_base);
|
|
val |= csd->enable_mask;
|
|
writel(val, ebi2_base);
|
|
dev_dbg(dev, "enabled CS%u\n", csindex);
|
|
|
|
/* Next set up the XMEMC */
|
|
slowcfg = 0;
|
|
fastcfg = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(xmem_props); i++) {
|
|
const struct ebi2_xmem_prop *xp = &xmem_props[i];
|
|
|
|
/* All are regular u32 values */
|
|
ret = of_property_read_u32(np, xp->prop, &val);
|
|
if (ret) {
|
|
dev_dbg(dev, "could not read %s for CS%d\n",
|
|
xp->prop, csindex);
|
|
continue;
|
|
}
|
|
|
|
/* First check boolean props */
|
|
if (xp->max == 1 && val) {
|
|
if (xp->slowreg)
|
|
slowcfg |= BIT(xp->shift);
|
|
else
|
|
fastcfg |= BIT(xp->shift);
|
|
dev_dbg(dev, "set %s flag\n", xp->prop);
|
|
continue;
|
|
}
|
|
|
|
/* We're dealing with an u32 */
|
|
if (val > xp->max) {
|
|
dev_err(dev,
|
|
"too high value for %s: %u, capped at %u\n",
|
|
xp->prop, val, xp->max);
|
|
val = xp->max;
|
|
}
|
|
if (xp->slowreg)
|
|
slowcfg |= (val << xp->shift);
|
|
else
|
|
fastcfg |= (val << xp->shift);
|
|
dev_dbg(dev, "set %s to %u\n", xp->prop, val);
|
|
}
|
|
|
|
dev_info(dev, "CS%u: SLOW CFG 0x%08x, FAST CFG 0x%08x\n",
|
|
csindex, slowcfg, fastcfg);
|
|
|
|
if (slowcfg)
|
|
writel(slowcfg, ebi2_xmem + csd->slow_cfg);
|
|
if (fastcfg)
|
|
writel(fastcfg, ebi2_xmem + csd->fast_cfg);
|
|
}
|
|
|
|
static int qcom_ebi2_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device_node *child;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
void __iomem *ebi2_base;
|
|
void __iomem *ebi2_xmem;
|
|
struct clk *ebi2xclk;
|
|
struct clk *ebi2clk;
|
|
bool have_children = false;
|
|
u32 val;
|
|
int ret;
|
|
|
|
ebi2xclk = devm_clk_get(dev, "ebi2x");
|
|
if (IS_ERR(ebi2xclk))
|
|
return PTR_ERR(ebi2xclk);
|
|
|
|
ret = clk_prepare_enable(ebi2xclk);
|
|
if (ret) {
|
|
dev_err(dev, "could not enable EBI2X clk (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ebi2clk = devm_clk_get(dev, "ebi2");
|
|
if (IS_ERR(ebi2clk)) {
|
|
ret = PTR_ERR(ebi2clk);
|
|
goto err_disable_2x_clk;
|
|
}
|
|
|
|
ret = clk_prepare_enable(ebi2clk);
|
|
if (ret) {
|
|
dev_err(dev, "could not enable EBI2 clk\n");
|
|
goto err_disable_2x_clk;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
ebi2_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(ebi2_base)) {
|
|
ret = PTR_ERR(ebi2_base);
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
ebi2_xmem = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(ebi2_xmem)) {
|
|
ret = PTR_ERR(ebi2_xmem);
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
/* Allegedly this turns the power save mode off */
|
|
writel(0UL, ebi2_xmem + EBI2_XMEM_CFG);
|
|
|
|
/* Disable all chipselects */
|
|
val = readl(ebi2_base);
|
|
val &= ~EBI2_CSN_MASK;
|
|
writel(val, ebi2_base);
|
|
|
|
/* Walk over the child nodes and see what chipselects we use */
|
|
for_each_available_child_of_node(np, child) {
|
|
u32 csindex;
|
|
|
|
/* Figure out the chipselect */
|
|
ret = of_property_read_u32(child, "reg", &csindex);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (csindex > 5) {
|
|
dev_err(dev,
|
|
"invalid chipselect %u, we only support 0-5\n",
|
|
csindex);
|
|
continue;
|
|
}
|
|
|
|
qcom_ebi2_setup_chipselect(child,
|
|
dev,
|
|
ebi2_base,
|
|
ebi2_xmem,
|
|
csindex);
|
|
|
|
/* We have at least one child */
|
|
have_children = true;
|
|
}
|
|
|
|
if (have_children)
|
|
return of_platform_default_populate(np, NULL, dev);
|
|
return 0;
|
|
|
|
err_disable_clk:
|
|
clk_disable_unprepare(ebi2clk);
|
|
err_disable_2x_clk:
|
|
clk_disable_unprepare(ebi2xclk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id qcom_ebi2_of_match[] = {
|
|
{ .compatible = "qcom,msm8660-ebi2", },
|
|
{ .compatible = "qcom,apq8060-ebi2", },
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver qcom_ebi2_driver = {
|
|
.probe = qcom_ebi2_probe,
|
|
.driver = {
|
|
.name = "qcom-ebi2",
|
|
.of_match_table = qcom_ebi2_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(qcom_ebi2_driver);
|
|
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
|
|
MODULE_DESCRIPTION("Qualcomm EBI2 driver");
|
|
MODULE_LICENSE("GPL");
|