mirror of https://gitee.com/openkylin/linux.git
166 lines
5.1 KiB
C
166 lines
5.1 KiB
C
/*
|
|
* FIXME correct answer depends on hmc_mode,
|
|
* as does (on omap1) any nonzero value for config->otg port number
|
|
*/
|
|
#if IS_ENABLED(CONFIG_USB_OMAP)
|
|
#define is_usb0_device(config) 1
|
|
#else
|
|
#define is_usb0_device(config) 0
|
|
#endif
|
|
|
|
struct omap_usb_config {
|
|
/* Configure drivers according to the connectors on your board:
|
|
* - "A" connector (rectagular)
|
|
* ... for host/OHCI use, set "register_host".
|
|
* - "B" connector (squarish) or "Mini-B"
|
|
* ... for device/gadget use, set "register_dev".
|
|
* - "Mini-AB" connector (very similar to Mini-B)
|
|
* ... for OTG use as device OR host, initialize "otg"
|
|
*/
|
|
unsigned register_host:1;
|
|
unsigned register_dev:1;
|
|
u8 otg; /* port number, 1-based: usb1 == 2 */
|
|
|
|
u8 hmc_mode;
|
|
|
|
/* implicitly true if otg: host supports remote wakeup? */
|
|
u8 rwc;
|
|
|
|
/* signaling pins used to talk to transceiver on usbN:
|
|
* 0 == usbN unused
|
|
* 2 == usb0-only, using internal transceiver
|
|
* 3 == 3 wire bidirectional
|
|
* 4 == 4 wire bidirectional
|
|
* 6 == 6 wire unidirectional (or TLL)
|
|
*/
|
|
u8 pins[3];
|
|
|
|
struct platform_device *udc_device;
|
|
struct platform_device *ohci_device;
|
|
struct platform_device *otg_device;
|
|
|
|
u32 (*usb0_init)(unsigned nwires, unsigned is_device);
|
|
u32 (*usb1_init)(unsigned nwires);
|
|
u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
|
|
|
|
int (*ocpi_enable)(void);
|
|
};
|
|
|
|
void omap_otg_init(struct omap_usb_config *config);
|
|
|
|
#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
|
|
void omap1_usb_init(struct omap_usb_config *pdata);
|
|
#else
|
|
static inline void omap1_usb_init(struct omap_usb_config *pdata)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
#define OMAP1_OTG_BASE 0xfffb0400
|
|
#define OMAP1_UDC_BASE 0xfffb4000
|
|
#define OMAP1_OHCI_BASE 0xfffba000
|
|
|
|
#define OMAP2_OHCI_BASE 0x4805e000
|
|
#define OMAP2_UDC_BASE 0x4805e200
|
|
#define OMAP2_OTG_BASE 0x4805e300
|
|
#define OTG_BASE OMAP1_OTG_BASE
|
|
#define UDC_BASE OMAP1_UDC_BASE
|
|
#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
|
|
|
|
/*
|
|
* OTG and transceiver registers, for OMAPs starting with ARM926
|
|
*/
|
|
#define OTG_REV (OTG_BASE + 0x00)
|
|
#define OTG_SYSCON_1 (OTG_BASE + 0x04)
|
|
# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
|
|
# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
|
|
# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
|
|
# define OTG_IDLE_EN (1 << 15)
|
|
# define HST_IDLE_EN (1 << 14)
|
|
# define DEV_IDLE_EN (1 << 13)
|
|
# define OTG_RESET_DONE (1 << 2)
|
|
# define OTG_SOFT_RESET (1 << 1)
|
|
#define OTG_SYSCON_2 (OTG_BASE + 0x08)
|
|
# define OTG_EN (1 << 31)
|
|
# define USBX_SYNCHRO (1 << 30)
|
|
# define OTG_MST16 (1 << 29)
|
|
# define SRP_GPDATA (1 << 28)
|
|
# define SRP_GPDVBUS (1 << 27)
|
|
# define SRP_GPUVBUS(w) (((w)>>24)&0x07)
|
|
# define A_WAIT_VRISE(w) (((w)>>20)&0x07)
|
|
# define B_ASE_BRST(w) (((w)>>16)&0x07)
|
|
# define SRP_DPW (1 << 14)
|
|
# define SRP_DATA (1 << 13)
|
|
# define SRP_VBUS (1 << 12)
|
|
# define OTG_PADEN (1 << 10)
|
|
# define HMC_PADEN (1 << 9)
|
|
# define UHOST_EN (1 << 8)
|
|
# define HMC_TLLSPEED (1 << 7)
|
|
# define HMC_TLLATTACH (1 << 6)
|
|
# define OTG_HMC(w) (((w)>>0)&0x3f)
|
|
#define OTG_CTRL (OTG_BASE + 0x0c)
|
|
# define OTG_USB2_EN (1 << 29)
|
|
# define OTG_USB2_DP (1 << 28)
|
|
# define OTG_USB2_DM (1 << 27)
|
|
# define OTG_USB1_EN (1 << 26)
|
|
# define OTG_USB1_DP (1 << 25)
|
|
# define OTG_USB1_DM (1 << 24)
|
|
# define OTG_USB0_EN (1 << 23)
|
|
# define OTG_USB0_DP (1 << 22)
|
|
# define OTG_USB0_DM (1 << 21)
|
|
# define OTG_ASESSVLD (1 << 20)
|
|
# define OTG_BSESSEND (1 << 19)
|
|
# define OTG_BSESSVLD (1 << 18)
|
|
# define OTG_VBUSVLD (1 << 17)
|
|
# define OTG_ID (1 << 16)
|
|
# define OTG_DRIVER_SEL (1 << 15)
|
|
# define OTG_A_SETB_HNPEN (1 << 12)
|
|
# define OTG_A_BUSREQ (1 << 11)
|
|
# define OTG_B_HNPEN (1 << 9)
|
|
# define OTG_B_BUSREQ (1 << 8)
|
|
# define OTG_BUSDROP (1 << 7)
|
|
# define OTG_PULLDOWN (1 << 5)
|
|
# define OTG_PULLUP (1 << 4)
|
|
# define OTG_DRV_VBUS (1 << 3)
|
|
# define OTG_PD_VBUS (1 << 2)
|
|
# define OTG_PU_VBUS (1 << 1)
|
|
# define OTG_PU_ID (1 << 0)
|
|
#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
|
|
# define DRIVER_SWITCH (1 << 15)
|
|
# define A_VBUS_ERR (1 << 13)
|
|
# define A_REQ_TMROUT (1 << 12)
|
|
# define A_SRP_DETECT (1 << 11)
|
|
# define B_HNP_FAIL (1 << 10)
|
|
# define B_SRP_TMROUT (1 << 9)
|
|
# define B_SRP_DONE (1 << 8)
|
|
# define B_SRP_STARTED (1 << 7)
|
|
# define OPRT_CHG (1 << 0)
|
|
#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
|
|
// same bits as in IRQ_EN
|
|
#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
|
|
# define OTGVPD (1 << 14)
|
|
# define OTGVPU (1 << 13)
|
|
# define OTGPUID (1 << 12)
|
|
# define USB2VDR (1 << 10)
|
|
# define USB2PDEN (1 << 9)
|
|
# define USB2PUEN (1 << 8)
|
|
# define USB1VDR (1 << 6)
|
|
# define USB1PDEN (1 << 5)
|
|
# define USB1PUEN (1 << 4)
|
|
# define USB0VDR (1 << 2)
|
|
# define USB0PDEN (1 << 1)
|
|
# define USB0PUEN (1 << 0)
|
|
#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
|
|
#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* OMAP1 */
|
|
#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
|
|
# define CONF_USB2_UNI_R (1 << 8)
|
|
# define CONF_USB1_UNI_R (1 << 7)
|
|
# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
|
|
# define CONF_USB0_ISOLATE_R (1 << 3)
|
|
# define CONF_USB_PWRDN_DM_R (1 << 2)
|
|
# define CONF_USB_PWRDN_DP_R (1 << 1)
|