mirror of https://gitee.com/openkylin/linux.git
551 lines
13 KiB
C
551 lines
13 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/board-omap3touchbook.c
|
|
*
|
|
* Copyright (C) 2009 Always Innovating
|
|
*
|
|
* Modified from mach-omap2/board-omap3beagleboard.c
|
|
*
|
|
* Initial code: Grégoire Gentil, Tim Yamin
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/input.h>
|
|
#include <linux/gpio_keys.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include <plat/mcspi.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/spi/ads7846.h>
|
|
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/i2c/twl.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include <plat/board.h>
|
|
#include <plat/common.h>
|
|
#include <plat/gpmc.h>
|
|
#include <plat/nand.h>
|
|
#include <plat/usb.h>
|
|
|
|
#include "mux.h"
|
|
#include "hsmmc.h"
|
|
#include "timer-gp.h"
|
|
|
|
#include <asm/setup.h>
|
|
|
|
#define NAND_BLOCK_SIZE SZ_128K
|
|
|
|
#define OMAP3_AC_GPIO 136
|
|
#define OMAP3_TS_GPIO 162
|
|
#define TB_BL_PWM_TIMER 9
|
|
#define TB_KILL_POWER_GPIO 168
|
|
|
|
static unsigned long touchbook_revision;
|
|
|
|
static struct mtd_partition omap3touchbook_nand_partitions[] = {
|
|
/* All the partition sizes are listed in terms of NAND block size */
|
|
{
|
|
.name = "X-Loader",
|
|
.offset = 0,
|
|
.size = 4 * NAND_BLOCK_SIZE,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "U-Boot",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
|
|
.size = 15 * NAND_BLOCK_SIZE,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
{
|
|
.name = "U-Boot Env",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
|
|
.size = 1 * NAND_BLOCK_SIZE,
|
|
},
|
|
{
|
|
.name = "Kernel",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
|
|
.size = 32 * NAND_BLOCK_SIZE,
|
|
},
|
|
{
|
|
.name = "File System",
|
|
.offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct omap_nand_platform_data omap3touchbook_nand_data = {
|
|
.options = NAND_BUSWIDTH_16,
|
|
.parts = omap3touchbook_nand_partitions,
|
|
.nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions),
|
|
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
|
|
.nand_setup = NULL,
|
|
.dev_ready = NULL,
|
|
};
|
|
|
|
#include "sdram-micron-mt46h32m32lf-6.h"
|
|
|
|
static struct omap2_hsmmc_info mmc[] = {
|
|
{
|
|
.mmc = 1,
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
|
.gpio_wp = 29,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static struct platform_device omap3_touchbook_lcd_device = {
|
|
.name = "omap3touchbook_lcd",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static struct regulator_consumer_supply touchbook_vmmc1_supply = {
|
|
.supply = "vmmc",
|
|
};
|
|
|
|
static struct regulator_consumer_supply touchbook_vsim_supply = {
|
|
.supply = "vmmc_aux",
|
|
};
|
|
|
|
static struct gpio_led gpio_leds[];
|
|
|
|
static int touchbook_twl_gpio_setup(struct device *dev,
|
|
unsigned gpio, unsigned ngpio)
|
|
{
|
|
if (system_rev >= 0x20 && system_rev <= 0x34301000) {
|
|
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
|
|
mmc[0].gpio_wp = 23;
|
|
} else {
|
|
omap_mux_init_gpio(29, OMAP_PIN_INPUT);
|
|
}
|
|
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
|
|
mmc[0].gpio_cd = gpio + 0;
|
|
omap2_hsmmc_init(mmc);
|
|
|
|
/* link regulators to MMC adapters */
|
|
touchbook_vmmc1_supply.dev = mmc[0].dev;
|
|
touchbook_vsim_supply.dev = mmc[0].dev;
|
|
|
|
/* REVISIT: need ehci-omap hooks for external VBUS
|
|
* power switch and overcurrent detect
|
|
*/
|
|
|
|
gpio_request(gpio + 1, "EHCI_nOC");
|
|
gpio_direction_input(gpio + 1);
|
|
|
|
/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
|
|
gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
|
|
gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
|
|
|
|
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
|
|
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct twl4030_gpio_platform_data touchbook_gpio_data = {
|
|
.gpio_base = OMAP_MAX_GPIO_LINES,
|
|
.irq_base = TWL4030_GPIO_IRQ_BASE,
|
|
.irq_end = TWL4030_GPIO_IRQ_END,
|
|
.use_leds = true,
|
|
.pullups = BIT(1),
|
|
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
|
|
| BIT(15) | BIT(16) | BIT(17),
|
|
.setup = touchbook_twl_gpio_setup,
|
|
};
|
|
|
|
static struct regulator_consumer_supply touchbook_vdac_supply = {
|
|
.supply = "vdac",
|
|
.dev = &omap3_touchbook_lcd_device.dev,
|
|
};
|
|
|
|
static struct regulator_consumer_supply touchbook_vdvi_supply = {
|
|
.supply = "vdvi",
|
|
.dev = &omap3_touchbook_lcd_device.dev,
|
|
};
|
|
|
|
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
|
|
static struct regulator_init_data touchbook_vmmc1 = {
|
|
.constraints = {
|
|
.min_uV = 1850000,
|
|
.max_uV = 3150000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &touchbook_vmmc1_supply,
|
|
};
|
|
|
|
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
|
|
static struct regulator_init_data touchbook_vsim = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 3000000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &touchbook_vsim_supply,
|
|
};
|
|
|
|
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
|
|
static struct regulator_init_data touchbook_vdac = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &touchbook_vdac_supply,
|
|
};
|
|
|
|
/* VPLL2 for digital video outputs */
|
|
static struct regulator_init_data touchbook_vpll2 = {
|
|
.constraints = {
|
|
.name = "VDVI",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &touchbook_vdvi_supply,
|
|
};
|
|
|
|
static struct twl4030_usb_data touchbook_usb_data = {
|
|
.usb_mode = T2_USB_MODE_ULPI,
|
|
};
|
|
|
|
static struct twl4030_codec_audio_data touchbook_audio_data;
|
|
|
|
static struct twl4030_codec_data touchbook_codec_data = {
|
|
.audio_mclk = 26000000,
|
|
.audio = &touchbook_audio_data,
|
|
};
|
|
|
|
static struct twl4030_platform_data touchbook_twldata = {
|
|
.irq_base = TWL4030_IRQ_BASE,
|
|
.irq_end = TWL4030_IRQ_END,
|
|
|
|
/* platform_data for children goes here */
|
|
.usb = &touchbook_usb_data,
|
|
.gpio = &touchbook_gpio_data,
|
|
.codec = &touchbook_codec_data,
|
|
.vmmc1 = &touchbook_vmmc1,
|
|
.vsim = &touchbook_vsim,
|
|
.vdac = &touchbook_vdac,
|
|
.vpll2 = &touchbook_vpll2,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("twl4030", 0x48),
|
|
.flags = I2C_CLIENT_WAKE,
|
|
.irq = INT_34XX_SYS_NIRQ,
|
|
.platform_data = &touchbook_twldata,
|
|
},
|
|
};
|
|
|
|
static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("bq27200", 0x55),
|
|
},
|
|
};
|
|
|
|
static int __init omap3_touchbook_i2c_init(void)
|
|
{
|
|
/* Standard TouchBook bus */
|
|
omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo,
|
|
ARRAY_SIZE(touchbook_i2c_boardinfo));
|
|
|
|
/* Additional TouchBook bus */
|
|
omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
|
|
ARRAY_SIZE(touchBook_i2c_boardinfo));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init omap3_ads7846_init(void)
|
|
{
|
|
if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) {
|
|
printk(KERN_ERR "Failed to request GPIO %d for "
|
|
"ads7846 pen down IRQ\n", OMAP3_TS_GPIO);
|
|
return;
|
|
}
|
|
|
|
gpio_direction_input(OMAP3_TS_GPIO);
|
|
gpio_set_debounce(OMAP3_TS_GPIO, 310);
|
|
}
|
|
|
|
static struct ads7846_platform_data ads7846_config = {
|
|
.x_min = 100,
|
|
.y_min = 265,
|
|
.x_max = 3950,
|
|
.y_max = 3750,
|
|
.x_plate_ohms = 40,
|
|
.pressure_max = 255,
|
|
.debounce_max = 10,
|
|
.debounce_tol = 5,
|
|
.debounce_rep = 1,
|
|
.gpio_pendown = OMAP3_TS_GPIO,
|
|
.keep_vref_on = 1,
|
|
};
|
|
|
|
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
|
|
.turbo_mode = 0,
|
|
.single_channel = 1, /* 0: slave, 1: master */
|
|
};
|
|
|
|
static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "ads7846",
|
|
.bus_num = 4,
|
|
.chip_select = 0,
|
|
.max_speed_hz = 1500000,
|
|
.controller_data = &ads7846_mcspi_config,
|
|
.irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO),
|
|
.platform_data = &ads7846_config,
|
|
}
|
|
};
|
|
|
|
static struct gpio_led gpio_leds[] = {
|
|
{
|
|
.name = "touchbook::usr0",
|
|
.default_trigger = "heartbeat",
|
|
.gpio = 150,
|
|
},
|
|
{
|
|
.name = "touchbook::usr1",
|
|
.default_trigger = "mmc0",
|
|
.gpio = 149,
|
|
},
|
|
{
|
|
.name = "touchbook::pmu_stat",
|
|
.gpio = -EINVAL, /* gets replaced */
|
|
.active_low = true,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data gpio_led_info = {
|
|
.leds = gpio_leds,
|
|
.num_leds = ARRAY_SIZE(gpio_leds),
|
|
};
|
|
|
|
static struct platform_device leds_gpio = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &gpio_led_info,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button gpio_buttons[] = {
|
|
{
|
|
.code = BTN_EXTRA,
|
|
.gpio = 7,
|
|
.desc = "user",
|
|
.wakeup = 1,
|
|
},
|
|
{
|
|
.code = KEY_POWER,
|
|
.gpio = 183,
|
|
.desc = "power",
|
|
.wakeup = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data gpio_key_info = {
|
|
.buttons = gpio_buttons,
|
|
.nbuttons = ARRAY_SIZE(gpio_buttons),
|
|
};
|
|
|
|
static struct platform_device keys_gpio = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &gpio_key_info,
|
|
},
|
|
};
|
|
|
|
static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
|
|
{ OMAP_TAG_LCD, &omap3_touchbook_lcd_config },
|
|
};
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
#endif
|
|
|
|
static void __init omap3_touchbook_init_early(void)
|
|
{
|
|
omap2_init_common_infrastructure();
|
|
omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
|
|
mt46h32m32lf6_sdrc_params);
|
|
}
|
|
|
|
static void __init omap3_touchbook_init_irq(void)
|
|
{
|
|
omap_init_irq();
|
|
#ifdef CONFIG_OMAP_32K_TIMER
|
|
omap2_gp_clockevent_set_gptimer(12);
|
|
#endif
|
|
}
|
|
|
|
static struct platform_device *omap3_touchbook_devices[] __initdata = {
|
|
&omap3_touchbook_lcd_device,
|
|
&leds_gpio,
|
|
&keys_gpio,
|
|
};
|
|
|
|
static void __init omap3touchbook_flash_init(void)
|
|
{
|
|
u8 cs = 0;
|
|
u8 nandcs = GPMC_CS_NUM + 1;
|
|
|
|
/* find out the chip-select on which NAND exists */
|
|
while (cs < GPMC_CS_NUM) {
|
|
u32 ret = 0;
|
|
ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
|
|
|
|
if ((ret & 0xC00) == 0x800) {
|
|
printk(KERN_INFO "Found NAND on CS%d\n", cs);
|
|
if (nandcs > GPMC_CS_NUM)
|
|
nandcs = cs;
|
|
}
|
|
cs++;
|
|
}
|
|
|
|
if (nandcs > GPMC_CS_NUM) {
|
|
printk(KERN_INFO "NAND: Unable to find configuration "
|
|
"in GPMC\n ");
|
|
return;
|
|
}
|
|
|
|
if (nandcs < GPMC_CS_NUM) {
|
|
omap3touchbook_nand_data.cs = nandcs;
|
|
|
|
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
|
|
if (gpmc_nand_init(&omap3touchbook_nand_data) < 0)
|
|
printk(KERN_ERR "Unable to register NAND device\n");
|
|
}
|
|
}
|
|
|
|
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
|
|
|
|
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
|
|
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
|
|
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
|
|
|
|
.phy_reset = true,
|
|
.reset_gpio_port[0] = -EINVAL,
|
|
.reset_gpio_port[1] = 147,
|
|
.reset_gpio_port[2] = -EINVAL
|
|
};
|
|
|
|
static void omap3_touchbook_poweroff(void)
|
|
{
|
|
int r;
|
|
|
|
r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset");
|
|
if (r < 0) {
|
|
printk(KERN_ERR "Unable to get kill power GPIO\n");
|
|
return;
|
|
}
|
|
|
|
gpio_direction_output(TB_KILL_POWER_GPIO, 0);
|
|
}
|
|
|
|
static int __init early_touchbook_revision(char *p)
|
|
{
|
|
if (!p)
|
|
return 0;
|
|
|
|
return strict_strtoul(p, 10, &touchbook_revision);
|
|
}
|
|
early_param("tbr", early_touchbook_revision);
|
|
|
|
static struct omap_musb_board_data musb_board_data = {
|
|
.interface_type = MUSB_INTERFACE_ULPI,
|
|
.mode = MUSB_OTG,
|
|
.power = 100,
|
|
};
|
|
|
|
static void __init omap3_touchbook_init(void)
|
|
{
|
|
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
|
omap_board_config = omap3_touchbook_config;
|
|
omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
|
|
|
|
pm_power_off = omap3_touchbook_poweroff;
|
|
|
|
omap3_touchbook_i2c_init();
|
|
platform_add_devices(omap3_touchbook_devices,
|
|
ARRAY_SIZE(omap3_touchbook_devices));
|
|
omap_serial_init();
|
|
|
|
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
|
|
gpio_request(176, "DVI_nPD");
|
|
/* REVISIT leave DVI powered down until it's needed ... */
|
|
gpio_direction_output(176, true);
|
|
|
|
/* Touchscreen and accelerometer */
|
|
spi_register_board_info(omap3_ads7846_spi_board_info,
|
|
ARRAY_SIZE(omap3_ads7846_spi_board_info));
|
|
omap3_ads7846_init();
|
|
usb_musb_init(&musb_board_data);
|
|
usbhs_init(&usbhs_bdata);
|
|
omap3touchbook_flash_init();
|
|
|
|
/* Ensure SDRC pins are mux'd for self-refresh */
|
|
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
|
|
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
|
|
}
|
|
|
|
MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
|
|
/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
|
|
.boot_params = 0x80000100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap3_map_io,
|
|
.init_early = omap3_touchbook_init_early,
|
|
.init_irq = omap3_touchbook_init_irq,
|
|
.init_machine = omap3_touchbook_init,
|
|
.timer = &omap_timer,
|
|
MACHINE_END
|