mirror of https://gitee.com/openkylin/linux.git
58 lines
2.0 KiB
Plaintext
58 lines
2.0 KiB
Plaintext
GPIO controlled regulators
|
|
|
|
Required properties:
|
|
- compatible : Must be "regulator-gpio".
|
|
- regulator-name : Defined in regulator.txt as optional, but required
|
|
here.
|
|
- gpios : Array of one or more GPIO pins used to select the
|
|
regulator voltage/current listed in "states".
|
|
- states : Selection of available voltages/currents provided by
|
|
this regulator and matching GPIO configurations to
|
|
achieve them. If there are no states in the "states"
|
|
array, use a fixed regulator instead.
|
|
|
|
Optional properties:
|
|
- enable-gpios : GPIO used to enable/disable the regulator.
|
|
Warning, the GPIO phandle flags are ignored and the
|
|
GPIO polarity is controlled solely by the presence
|
|
of "enable-active-high" DT property. This is due to
|
|
compatibility with old DTs.
|
|
- enable-active-high : Polarity of "enable-gpio" GPIO is active HIGH.
|
|
Default is active LOW.
|
|
- gpios-states : On operating systems, that don't support reading back
|
|
gpio values in output mode (most notably linux), this
|
|
array provides the state of GPIO pins set when
|
|
requesting them from the gpio controller. Systems,
|
|
that are capable of preserving state when requesting
|
|
the lines, are free to ignore this property.
|
|
0: LOW, 1: HIGH. Default is LOW if nothing else
|
|
is specified.
|
|
- startup-delay-us : Startup time in microseconds.
|
|
- regulator-type : Specifies what is being regulated, must be either
|
|
"voltage" or "current", defaults to voltage.
|
|
|
|
Any property defined as part of the core regulator binding defined in
|
|
regulator.txt can also be used.
|
|
|
|
Example:
|
|
|
|
mmciv: gpio-regulator {
|
|
compatible = "regulator-gpio";
|
|
|
|
regulator-name = "mmci-gpio-supply";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2600000>;
|
|
regulator-boot-on;
|
|
|
|
enable-gpios = <&gpio0 23 0x4>;
|
|
gpios = <&gpio0 24 0x4
|
|
&gpio0 25 0x4>;
|
|
states = <1800000 0x3
|
|
2200000 0x2
|
|
2600000 0x1
|
|
2900000 0x0>;
|
|
|
|
startup-delay-us = <100000>;
|
|
enable-active-high;
|
|
};
|