mirror of https://gitee.com/openkylin/linux.git
206 lines
5.2 KiB
ArmAsm
206 lines
5.2 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* linux/arch/arm/mm/proc-arm720.S: MMU functions for ARM720
|
|
*
|
|
* Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
|
|
* Rob Scott (rscott@mtrob.fdns.net)
|
|
* Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd.
|
|
* hacked for non-paged-MM by Hyok S. Choi, 2004.
|
|
*
|
|
* These are the low level assembler for performing cache and TLB
|
|
* functions on the ARM720T. The ARM720T has a writethrough IDC
|
|
* cache, so we don't need to clean it.
|
|
*
|
|
* Changelog:
|
|
* 05-09-2000 SJH Created by moving 720 specific functions
|
|
* out of 'proc-arm6,7.S' per RMK discussion
|
|
* 07-25-2000 SJH Added idle function.
|
|
* 08-25-2000 DBS Updated for integration of ARM Ltd version.
|
|
* 04-20-2004 HSC modified for non-paged memory management mode.
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pgtable.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hwcap.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/ptrace.h>
|
|
|
|
#include "proc-macros.S"
|
|
|
|
/*
|
|
* Function: arm720_proc_init (void)
|
|
* : arm720_proc_fin (void)
|
|
*
|
|
* Notes : This processor does not require these
|
|
*/
|
|
ENTRY(cpu_arm720_dcache_clean_area)
|
|
ENTRY(cpu_arm720_proc_init)
|
|
ret lr
|
|
|
|
ENTRY(cpu_arm720_proc_fin)
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #0x1000 @ ...i............
|
|
bic r0, r0, #0x000e @ ............wca.
|
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
|
ret lr
|
|
|
|
/*
|
|
* Function: arm720_proc_do_idle(void)
|
|
* Params : r0 = unused
|
|
* Purpose : put the processor in proper idle mode
|
|
*/
|
|
ENTRY(cpu_arm720_do_idle)
|
|
ret lr
|
|
|
|
/*
|
|
* Function: arm720_switch_mm(unsigned long pgd_phys)
|
|
* Params : pgd_phys Physical address of page table
|
|
* Purpose : Perform a task switch, saving the old process' state and restoring
|
|
* the new.
|
|
*/
|
|
ENTRY(cpu_arm720_switch_mm)
|
|
#ifdef CONFIG_MMU
|
|
mov r1, #0
|
|
mcr p15, 0, r1, c7, c7, 0 @ invalidate cache
|
|
mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
|
|
mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4)
|
|
#endif
|
|
ret lr
|
|
|
|
/*
|
|
* Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
|
|
* Params : r0 = Address to set
|
|
* : r1 = value to set
|
|
* Purpose : Set a PTE and flush it out of any WB cache
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_arm720_set_pte_ext)
|
|
#ifdef CONFIG_MMU
|
|
armv3_set_pte_ext wc_disable=0
|
|
#endif
|
|
ret lr
|
|
|
|
/*
|
|
* Function: arm720_reset
|
|
* Params : r0 = address to jump to
|
|
* Notes : This sets up everything for a reset
|
|
*/
|
|
.pushsection .idmap.text, "ax"
|
|
ENTRY(cpu_arm720_reset)
|
|
mov ip, #0
|
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
|
|
#endif
|
|
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
|
|
bic ip, ip, #0x000f @ ............wcam
|
|
bic ip, ip, #0x2100 @ ..v....s........
|
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
ret r0
|
|
ENDPROC(cpu_arm720_reset)
|
|
.popsection
|
|
|
|
.type __arm710_setup, #function
|
|
__arm710_setup:
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
|
|
#endif
|
|
mrc p15, 0, r0, c1, c0 @ get control register
|
|
ldr r5, arm710_cr1_clear
|
|
bic r0, r0, r5
|
|
ldr r5, arm710_cr1_set
|
|
orr r0, r0, r5
|
|
ret lr @ __ret (head.S)
|
|
.size __arm710_setup, . - __arm710_setup
|
|
|
|
/*
|
|
* R
|
|
* .RVI ZFRS BLDP WCAM
|
|
* .... 0001 ..11 1101
|
|
*
|
|
*/
|
|
.type arm710_cr1_clear, #object
|
|
.type arm710_cr1_set, #object
|
|
arm710_cr1_clear:
|
|
.word 0x0f3f
|
|
arm710_cr1_set:
|
|
.word 0x013d
|
|
|
|
.type __arm720_setup, #function
|
|
__arm720_setup:
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 @ invalidate caches
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
|
|
#endif
|
|
adr r5, arm720_crval
|
|
ldmia r5, {r5, r6}
|
|
mrc p15, 0, r0, c1, c0 @ get control register
|
|
bic r0, r0, r5
|
|
orr r0, r0, r6
|
|
ret lr @ __ret (head.S)
|
|
.size __arm720_setup, . - __arm720_setup
|
|
|
|
/*
|
|
* R
|
|
* .RVI ZFRS BLDP WCAM
|
|
* ..1. 1001 ..11 1101
|
|
*
|
|
*/
|
|
.type arm720_crval, #object
|
|
arm720_crval:
|
|
crval clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130
|
|
|
|
__INITDATA
|
|
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
|
|
define_processor_functions arm720, dabort=v4t_late_abort, pabort=legacy_pabort
|
|
|
|
.section ".rodata"
|
|
|
|
string cpu_arch_name, "armv4t"
|
|
string cpu_elf_name, "v4"
|
|
string cpu_arm710_name, "ARM710T"
|
|
string cpu_arm720_name, "ARM720T"
|
|
|
|
.align
|
|
|
|
/*
|
|
* See <asm/procinfo.h> for a definition of this structure.
|
|
*/
|
|
|
|
.section ".proc.info.init", "a"
|
|
|
|
.macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req
|
|
.type __\name\()_proc_info,#object
|
|
__\name\()_proc_info:
|
|
.long \cpu_val
|
|
.long \cpu_mask
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_BUFFERABLE | \
|
|
PMD_SECT_CACHEABLE | \
|
|
PMD_BIT4 | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_BIT4 | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
initfn \cpu_flush, __\name\()_proc_info @ cpu_flush
|
|
.long cpu_arch_name @ arch_name
|
|
.long cpu_elf_name @ elf_name
|
|
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap
|
|
.long \cpu_name
|
|
.long arm720_processor_functions
|
|
.long v4_tlb_fns
|
|
.long v4wt_user_fns
|
|
.long v4_cache_fns
|
|
.size __\name\()_proc_info, . - __\name\()_proc_info
|
|
.endm
|
|
|
|
arm720_proc_info arm710, 0x41807100, 0xffffff00, cpu_arm710_name, __arm710_setup
|
|
arm720_proc_info arm720, 0x41807200, 0xffffff00, cpu_arm720_name, __arm720_setup
|