linux/arch/arm/boot/dts/dove-d3plug.dts

104 lines
1.8 KiB
Plaintext

/dts-v1/;
#include "dove.dtsi"
/ {
model = "Globalscale D3Plug";
compatible = "globalscale,d3plug", "marvell,dove";
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
pinctrl-names = "default";
wlan-act {
label = "wlan-act";
gpios = <&gpio0 0 1>;
};
wlan-ap {
label = "wlan-ap";
gpios = <&gpio0 1 1>;
};
status {
label = "status";
gpios = <&gpio0 2 1>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 8 0>;
pinctrl-0 = <&pmx_gpio_8>;
pinctrl-names = "default";
};
};
};
&uart0 { status = "okay"; };
&sata0 { status = "okay"; };
&i2c0 { status = "okay"; };
/* Samsung M8G2F eMMC */
&sdio0 {
status = "okay";
non-removable;
bus-width = <4>;
};
/* Marvell SD8787 WLAN/BT */
&sdio1 {
status = "okay";
non-removable;
};
&spi0 {
status = "okay";
/* spi0.0: 2M Flash Macronix MX25L1605D */
spi-flash@0 {
compatible = "st,m25l1605d";
spi-max-frequency = <86000000>;
reg = <0>;
};
};
&pcie {
status = "okay";
/* Fresco Logic USB3.0 xHCI controller */
pcie-port@0 {
status = "okay";
reset-gpios = <&gpio0 26 1>;
reset-delay-us = <20000>;
pinctrl-0 = <&pmx_camera_gpio>;
pinctrl-names = "default";
};
/* Mini-PCIe slot */
pcie-port@1 {
status = "okay";
reset-gpios = <&gpio0 25 1>;
};
};