linux/arch/arm/boot/dts/imx6sl-evk.dts

136 lines
2.9 KiB
Plaintext

/*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "imx6sl.dtsi"
/ {
model = "Freescale i.MX6 SoloLite EVK Board";
compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
memory {
reg = <0x80000000 0x40000000>;
};
regulators {
compatible = "simple-bus";
reg_usb_otg1_vbus: usb_otg1_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 0 0>;
enable-active-high;
};
reg_usb_otg2_vbus: usb_otg2_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 2 0>;
enable-active-high;
};
};
};
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 11 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1_1>;
status = "okay";
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "rmii";
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059
MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059
MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059
MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000
MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000
>;
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usb_otg1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_1>;
disable-over-current;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usb_otg2_vbus>;
dr_mode = "host";
disable-over-current;
status = "okay";
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1_1>;
pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
bus-width = <8>;
cd-gpios = <&gpio4 7 0>;
wp-gpios = <&gpio4 6 0>;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2_1>;
pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
cd-gpios = <&gpio5 0 0>;
wp-gpios = <&gpio4 29 0>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3_1>;
pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
cd-gpios = <&gpio3 22 0>;
status = "okay";
};