linux/arch/arm/boot/dts/omap3-overo.dtsi

98 lines
1.6 KiB
Plaintext

/*
* Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* The Gumstix Overo must be combined with an expansion board.
*/
/dts-v1/;
#include "omap34xx.dtsi"
/ {
pwmleds {
compatible = "pwm-leds";
overo {
label = "overo:blue:COM";
pwms = <&twl_pwmled 1 7812500>;
max-brightness = <127>;
linux,default-trigger = "mmc0";
};
};
sound {
compatible = "ti,omap-twl4030";
ti,model = "overo";
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
};
&i2c1 {
clock-frequency = <2600000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
};
};
};
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
/* i2c2 pins are used for gpio */
&i2c2 {
status = "disabled";
};
/* on board microSD slot */
&mmc1 {
vmmc-supply = <&vmmc1>;
bus-width = <4>;
};
/* optional on board WiFi */
&mmc2 {
bus-width = <4>;
};
&twl_gpio {
ti,use-leds;
};
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
phys = <&usb2_phy>;
phy-names = "usb2-phy";
mode = <3>;
power = <50>;
};
&omap3_pmx_core {
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};