linux/arch/arm/boot/dts/tegra30-cardhu-a02.dts

95 lines
2.3 KiB
Plaintext

/dts-v1/;
#include "tegra30-cardhu.dtsi"
/* This dts file support the cardhu A02 version of board */
/ {
model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
ddr_reg: regulator@100 {
compatible = "regulator-fixed";
reg = <100>;
regulator-name = "vdd_ddr";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
};
sys_3v3_reg: regulator@101 {
compatible = "regulator-fixed";
reg = <101>;
regulator-name = "sys_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
};
usb1_vbus_reg: regulator@102 {
compatible = "regulator-fixed";
reg = <102>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
usb3_vbus_reg: regulator@103 {
compatible = "regulator-fixed";
reg = <103>;
regulator-name = "usb3_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
vdd_5v0_reg: regulator@104 {
compatible = "regulator-fixed";
reg = <104>;
regulator-name = "5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
};
vdd_bl_reg: regulator@105 {
compatible = "regulator-fixed";
reg = <105>;
regulator-name = "vdd_bl";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
};
};
sdhci@78000400 {
status = "okay";
power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
};