mirror of https://gitee.com/openkylin/linux.git
70 lines
2.2 KiB
Plaintext
70 lines
2.2 KiB
Plaintext
* MDIO IO device
|
|
|
|
The MDIO is a bus to which the PHY devices are connected. For each
|
|
device that exists on this bus, a child node should be created. See
|
|
the definition of the PHY node below for an example of how to define
|
|
a PHY.
|
|
|
|
Required properties:
|
|
- reg : Offset and length of the register set for the device
|
|
- compatible : Should define the compatible device type for the
|
|
mdio. Currently, this is most likely to be "fsl,gianfar-mdio"
|
|
|
|
Example:
|
|
|
|
mdio@24520 {
|
|
reg = <24520 20>;
|
|
compatible = "fsl,gianfar-mdio";
|
|
|
|
ethernet-phy@0 {
|
|
......
|
|
};
|
|
};
|
|
|
|
|
|
* Gianfar-compatible ethernet nodes
|
|
|
|
Required properties:
|
|
|
|
- device_type : Should be "network"
|
|
- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
|
|
- compatible : Should be "gianfar"
|
|
- reg : Offset and length of the register set for the device
|
|
- mac-address : List of bytes representing the ethernet address of
|
|
this controller
|
|
- interrupts : <a b> where a is the interrupt number and b is a
|
|
field that represents an encoding of the sense and level
|
|
information for the interrupt. This should be encoded based on
|
|
the information in section 2) depending on the type of interrupt
|
|
controller you have.
|
|
- interrupt-parent : the phandle for the interrupt controller that
|
|
services interrupts for this device.
|
|
- phy-handle : The phandle for the PHY connected to this ethernet
|
|
controller.
|
|
- fixed-link : <a b c d e> where a is emulated phy id - choose any,
|
|
but unique to the all specified fixed-links, b is duplex - 0 half,
|
|
1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
|
|
pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
|
|
|
|
Recommended properties:
|
|
|
|
- phy-connection-type : a string naming the controller/PHY interface type,
|
|
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
|
|
"tbi", or "rtbi". This property is only really needed if the connection
|
|
is of type "rgmii-id", as all other connection types are detected by
|
|
hardware.
|
|
|
|
|
|
Example:
|
|
ethernet@24000 {
|
|
#size-cells = <0>;
|
|
device_type = "network";
|
|
model = "TSEC";
|
|
compatible = "gianfar";
|
|
reg = <24000 1000>;
|
|
mac-address = [ 00 E0 0C 00 73 00 ];
|
|
interrupts = <d 3 e 3 12 3>;
|
|
interrupt-parent = <40000>;
|
|
phy-handle = <2452000>
|
|
};
|