mirror of https://gitee.com/openkylin/linux.git
d94dcbb101
There are two ways to mark a port as unimplemented. Typical way is to return port type as TB_TYPE_INACTIVE when its config space is read. Alternatively if the port is not physically present (such as ports 10 and 11 in ICL) reading from port config space returns TB_CFG_ERROR_INVALID_CONFIG_SPACE instead. Currently the driver bails out from adding the switch if it receives any error during port inititialization which is wrong. Handle this properly and just leave the port as TB_TYPE_INACTIVE before continuing to the next port. This also allows us to get rid of special casing for Light Ridge port 5 in eeprom.c. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| cap.c | ||
| ctl.c | ||
| ctl.h | ||
| dma_port.c | ||
| dma_port.h | ||
| domain.c | ||
| eeprom.c | ||
| icm.c | ||
| lc.c | ||
| nhi.c | ||
| nhi.h | ||
| nhi_regs.h | ||
| path.c | ||
| property.c | ||
| switch.c | ||
| tb.c | ||
| tb.h | ||
| tb_msgs.h | ||
| tb_regs.h | ||
| tunnel.c | ||
| tunnel.h | ||
| xdomain.c | ||