mirror of https://gitee.com/openkylin/linux.git
140 lines
5.3 KiB
Plaintext
140 lines
5.3 KiB
Plaintext
* ARM System MMU Architecture Implementation
|
|
|
|
ARM SoCs may contain an implementation of the ARM System Memory
|
|
Management Unit Architecture, which can be used to provide 1 or 2 stages
|
|
of address translation to bus masters external to the CPU.
|
|
|
|
The SMMU may also raise interrupts in response to various fault
|
|
conditions.
|
|
|
|
** System MMU required properties:
|
|
|
|
- compatible : Should be one of:
|
|
|
|
"arm,smmu-v1"
|
|
"arm,smmu-v2"
|
|
"arm,mmu-400"
|
|
"arm,mmu-401"
|
|
"arm,mmu-500"
|
|
"cavium,smmu-v2"
|
|
|
|
depending on the particular implementation and/or the
|
|
version of the architecture implemented.
|
|
|
|
- reg : Base address and size of the SMMU.
|
|
|
|
- #global-interrupts : The number of global interrupts exposed by the
|
|
device.
|
|
|
|
- interrupts : Interrupt list, with the first #global-irqs entries
|
|
corresponding to the global interrupts and any
|
|
following entries corresponding to context interrupts,
|
|
specified in order of their indexing by the SMMU.
|
|
|
|
For SMMUv2 implementations, there must be exactly one
|
|
interrupt per context bank. In the case of a single,
|
|
combined interrupt, it must be listed multiple times.
|
|
|
|
- #iommu-cells : See Documentation/devicetree/bindings/iommu/iommu.txt
|
|
for details. With a value of 1, each IOMMU specifier
|
|
represents a distinct stream ID emitted by that device
|
|
into the relevant SMMU.
|
|
|
|
SMMUs with stream matching support and complex masters
|
|
may use a value of 2, where the second cell of the
|
|
IOMMU specifier represents an SMR mask to combine with
|
|
the ID in the first cell. Care must be taken to ensure
|
|
the set of matched IDs does not result in conflicts.
|
|
|
|
** System MMU optional properties:
|
|
|
|
- dma-coherent : Present if page table walks made by the SMMU are
|
|
cache coherent with the CPU.
|
|
|
|
NOTE: this only applies to the SMMU itself, not
|
|
masters connected upstream of the SMMU.
|
|
|
|
- calxeda,smmu-secure-config-access : Enable proper handling of buggy
|
|
implementations that always use secure access to
|
|
SMMU configuration registers. In this case non-secure
|
|
aliases of secure registers have to be used during
|
|
SMMU configuration.
|
|
|
|
- stream-match-mask : For SMMUs supporting stream matching and using
|
|
#iommu-cells = <1>, specifies a mask of bits to ignore
|
|
when matching stream IDs (e.g. this may be programmed
|
|
into the SMRn.MASK field of every stream match register
|
|
used). For cases where it is desirable to ignore some
|
|
portion of every Stream ID (e.g. for certain MMU-500
|
|
configurations given globally unique input IDs). This
|
|
property is not valid for SMMUs using stream indexing,
|
|
or using stream matching with #iommu-cells = <2>, and
|
|
may be ignored if present in such cases.
|
|
|
|
** Deprecated properties:
|
|
|
|
- mmu-masters (deprecated in favour of the generic "iommus" binding) :
|
|
A list of phandles to device nodes representing bus
|
|
masters for which the SMMU can provide a translation
|
|
and their corresponding Stream IDs. Each device node
|
|
linked from this list must have a "#stream-id-cells"
|
|
property, indicating the number of Stream ID
|
|
arguments associated with its phandle.
|
|
|
|
** Examples:
|
|
|
|
/* SMMU with stream matching or stream indexing */
|
|
smmu1: iommu {
|
|
compatible = "arm,smmu-v1";
|
|
reg = <0xba5e0000 0x10000>;
|
|
#global-interrupts = <2>;
|
|
interrupts = <0 32 4>,
|
|
<0 33 4>,
|
|
<0 34 4>, /* This is the first context interrupt */
|
|
<0 35 4>,
|
|
<0 36 4>,
|
|
<0 37 4>;
|
|
#iommu-cells = <1>;
|
|
};
|
|
|
|
/* device with two stream IDs, 0 and 7 */
|
|
master1 {
|
|
iommus = <&smmu1 0>,
|
|
<&smmu1 7>;
|
|
};
|
|
|
|
|
|
/* SMMU with stream matching */
|
|
smmu2: iommu {
|
|
...
|
|
#iommu-cells = <2>;
|
|
};
|
|
|
|
/* device with stream IDs 0 and 7 */
|
|
master2 {
|
|
iommus = <&smmu2 0 0>,
|
|
<&smmu2 7 0>;
|
|
};
|
|
|
|
/* device with stream IDs 1, 17, 33 and 49 */
|
|
master3 {
|
|
iommus = <&smmu2 1 0x30>;
|
|
};
|
|
|
|
|
|
/* ARM MMU-500 with 10-bit stream ID input configuration */
|
|
smmu3: iommu {
|
|
compatible = "arm,mmu-500", "arm,smmu-v2";
|
|
...
|
|
#iommu-cells = <1>;
|
|
/* always ignore appended 5-bit TBU number */
|
|
stream-match-mask = 0x7c00;
|
|
};
|
|
|
|
bus {
|
|
/* bus whose child devices emit one unique 10-bit stream
|
|
ID each, but may master through multiple SMMU TBUs */
|
|
iommu-map = <0 &smmu3 0 0x400>;
|
|
...
|
|
};
|