mirror of https://gitee.com/openkylin/linux.git
117 lines
4.0 KiB
Plaintext
117 lines
4.0 KiB
Plaintext
What: /sys/class/watchdog/watchdogn/bootstatus
|
|
Date: August 2015
|
|
Contact: Wim Van Sebroeck <wim@iguana.be>
|
|
Description:
|
|
It is a read only file. It contains status of the watchdog
|
|
device at boot. It is equivalent to WDIOC_GETBOOTSTATUS of
|
|
ioctl interface.
|
|
|
|
What: /sys/class/watchdog/watchdogn/identity
|
|
Date: August 2015
|
|
Contact: Wim Van Sebroeck <wim@iguana.be>
|
|
Description:
|
|
It is a read only file. It contains identity string of
|
|
watchdog device.
|
|
|
|
What: /sys/class/watchdog/watchdogn/nowayout
|
|
Date: August 2015
|
|
Contact: Wim Van Sebroeck <wim@iguana.be>
|
|
Description:
|
|
It is a read/write file. While reading, it gives '1'
|
|
if the device has the nowayout feature set, otherwise
|
|
it gives '0'. Writing a '1' to the file enables the
|
|
nowayout feature. Once set, the nowayout feature
|
|
cannot be disabled, so writing a '0' either has no
|
|
effect (if the feature was already disabled) or
|
|
results in a permission error.
|
|
|
|
What: /sys/class/watchdog/watchdogn/state
|
|
Date: August 2015
|
|
Contact: Wim Van Sebroeck <wim@iguana.be>
|
|
Description:
|
|
It is a read only file. It gives active/inactive status of
|
|
watchdog device.
|
|
|
|
What: /sys/class/watchdog/watchdogn/status
|
|
Date: August 2015
|
|
Contact: Wim Van Sebroeck <wim@iguana.be>
|
|
Description:
|
|
It is a read only file. It contains watchdog device's
|
|
internal status bits. It is equivalent to WDIOC_GETSTATUS
|
|
of ioctl interface.
|
|
|
|
What: /sys/class/watchdog/watchdogn/timeleft
|
|
Date: August 2015
|
|
Contact: Wim Van Sebroeck <wim@iguana.be>
|
|
Description:
|
|
It is a read only file. It contains value of time left for
|
|
reset generation. It is equivalent to WDIOC_GETTIMELEFT of
|
|
ioctl interface.
|
|
|
|
What: /sys/class/watchdog/watchdogn/timeout
|
|
Date: August 2015
|
|
Contact: Wim Van Sebroeck <wim@iguana.be>
|
|
Description:
|
|
It is a read only file. It is read to know about current
|
|
value of timeout programmed.
|
|
|
|
What: /sys/class/watchdog/watchdogn/pretimeout
|
|
Date: December 2016
|
|
Contact: Wim Van Sebroeck <wim@iguana.be>
|
|
Description:
|
|
It is a read only file. It specifies the time in seconds before
|
|
timeout when the pretimeout interrupt is delivered. Pretimeout
|
|
is an optional feature.
|
|
|
|
What: /sys/class/watchdog/watchdogn/pretimeout_avaialable_governors
|
|
Date: February 2017
|
|
Contact: Wim Van Sebroeck <wim@iguana.be>
|
|
Description:
|
|
It is a read only file. It shows the pretimeout governors
|
|
available for this watchdog.
|
|
|
|
What: /sys/class/watchdog/watchdogn/pretimeout_governor
|
|
Date: February 2017
|
|
Contact: Wim Van Sebroeck <wim@iguana.be>
|
|
Description:
|
|
It is a read/write file. When read, the currently assigned
|
|
pretimeout governor is returned. When written, it sets
|
|
the pretimeout governor.
|
|
|
|
What: /sys/class/watchdog/watchdog1/access_cs0
|
|
Date: August 2019
|
|
Contact: Ivan Mikhaylov <i.mikhaylov@yadro.com>,
|
|
Alexander Amelkin <a.amelkin@yadro.com>
|
|
Description:
|
|
It is a read/write file. This attribute exists only if the
|
|
system has booted from the alternate flash chip due to
|
|
expiration of a watchdog timer of AST2400/AST2500 when
|
|
alternate boot function was enabled with 'aspeed,alt-boot'
|
|
devicetree option for that watchdog or with an appropriate
|
|
h/w strapping (for WDT2 only).
|
|
|
|
At alternate flash the 'access_cs0' sysfs node provides:
|
|
|
|
ast2400:
|
|
a way to get access to the primary SPI flash
|
|
chip at CS0 after booting from the alternate
|
|
chip at CS1.
|
|
ast2500:
|
|
a way to restore the normal address mapping
|
|
from (CS0->CS1, CS1->CS0) to (CS0->CS0,
|
|
CS1->CS1).
|
|
|
|
Clearing the boot code selection and timeout counter also
|
|
resets to the initial state the chip select line mapping. When
|
|
the SoC is in normal mapping state (i.e. booted from CS0),
|
|
clearing those bits does nothing for both versions of the SoC.
|
|
For alternate boot mode (booted from CS1 due to wdt2
|
|
expiration) the behavior differs as described above.
|
|
|
|
This option can be used with wdt2 (watchdog1) only.
|
|
|
|
When read, the current status of the boot code selection is
|
|
shown. When written with any non-zero value, it clears
|
|
the boot code selection and the timeout counter, which results
|
|
in chipselect reset for AST2400/AST2500.
|