mirror of https://gitee.com/openkylin/linux.git
53 lines
1.4 KiB
Plaintext
53 lines
1.4 KiB
Plaintext
Qualcomm adreno/snapdragon GPU
|
|
|
|
Required properties:
|
|
- compatible: "qcom,adreno-3xx"
|
|
- reg: Physical base address and length of the controller's registers.
|
|
- interrupts: The interrupt signal from the gpu.
|
|
- clocks: device clocks
|
|
See ../clocks/clock-bindings.txt for details.
|
|
- clock-names: the following clocks are required:
|
|
* "core_clk"
|
|
* "iface_clk"
|
|
* "mem_iface_clk"
|
|
- qcom,chipid: gpu chip-id. Note this may become optional for future
|
|
devices if we can reliably read the chipid from hw
|
|
- qcom,gpu-pwrlevels: list of operating points
|
|
- compatible: "qcom,gpu-pwrlevels"
|
|
- for each qcom,gpu-pwrlevel:
|
|
- qcom,gpu-freq: requested gpu clock speed
|
|
- NOTE: downstream android driver defines additional parameters to
|
|
configure memory bandwidth scaling per OPP.
|
|
|
|
Example:
|
|
|
|
/ {
|
|
...
|
|
|
|
gpu: qcom,kgsl-3d0@4300000 {
|
|
compatible = "qcom,adreno-3xx";
|
|
reg = <0x04300000 0x20000>;
|
|
reg-names = "kgsl_3d0_reg_memory";
|
|
interrupts = <GIC_SPI 80 0>;
|
|
interrupt-names = "kgsl_3d0_irq";
|
|
clock-names =
|
|
"core_clk",
|
|
"iface_clk",
|
|
"mem_iface_clk";
|
|
clocks =
|
|
<&mmcc GFX3D_CLK>,
|
|
<&mmcc GFX3D_AHB_CLK>,
|
|
<&mmcc MMSS_IMEM_AHB_CLK>;
|
|
qcom,chipid = <0x03020100>;
|
|
qcom,gpu-pwrlevels {
|
|
compatible = "qcom,gpu-pwrlevels";
|
|
qcom,gpu-pwrlevel@0 {
|
|
qcom,gpu-freq = <450000000>;
|
|
};
|
|
qcom,gpu-pwrlevel@1 {
|
|
qcom,gpu-freq = <27000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|