linux/drivers/usb/musb
Lothar Waßmann 8035691365 usb: musb: dsps: fix the base address for accessing the mode register
commit 943c13971c "usb: musb: dsps: implement ->set_mode()"
should have made it possible to use the driver with boards that have
the USBID pin unconnected. This doesn't actually work, since the
driver uses the wrong base address to access the mode register.
Furthermore it uses different base addresses in different places to
access the same register (phy_utmi).

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-30 13:31:48 -05:00
..
Kconfig usb: musb: omap2plus bus glue needs USB host support 2014-05-14 09:23:32 -05:00
Makefile usb: musb: add support for JZ4740 usb device controller 2013-12-20 09:53:24 -06:00
am35x.c usb: phy: generic: allow multiples calls to usb_phy_generic_register() 2014-04-21 14:07:25 -05:00
blackfin.c usb: phy: generic: allow multiples calls to usb_phy_generic_register() 2014-04-21 14:07:25 -05:00
blackfin.h usb: musb: drop a gigantic amount of ifdeferry 2011-07-01 14:31:10 -07:00
cppi_dma.c usb: musb: dma: merge ->start/stop into create/destroy 2013-07-29 13:53:18 +03:00
cppi_dma.h
da8xx.c usb: phy: generic: allow multiples calls to usb_phy_generic_register() 2014-04-21 14:07:25 -05:00
davinci.c usb: musb: move usb_phy_generic_{un,}register calls to probe()/remove() 2014-04-21 14:07:25 -05:00
davinci.h usb: musb: davinci: Fix build breakage 2012-06-04 18:29:42 +03:00
jz4740.c usb: musb: add support for JZ4740 usb device controller 2013-12-20 09:53:24 -06:00
musb_am335x.c usb: musb: Fix panic upon musb_am335x module removal 2014-06-27 10:53:06 -05:00
musb_core.c usb: musb: core: Handle Babble condition only in HOST mode 2014-06-19 15:43:07 -05:00
musb_core.h usb: musb: tusb6010: Add tusb_revision to struct musb to store the revision. 2014-05-16 12:14:55 -05:00
musb_cppi41.c usb: musb: Ensure that cppi41 timer gets armed on premature DMA TX irq 2014-06-27 10:53:37 -05:00
musb_debug.h usb: musb: remove extern qualifier from musb_debug.h header 2011-12-21 13:21:02 +02:00
musb_debugfs.c usb: remove use of __devinit 2012-11-21 13:27:16 -08:00
musb_dma.h usb: musb dma: add cppi41 dma driver 2013-08-09 17:40:16 +03:00
musb_dsps.c usb: musb: dsps: fix the base address for accessing the mode register 2014-06-30 13:31:48 -05:00
musb_gadget.c usb: musb: fix setting JZ4740 gadget periphal mode on reset 2013-12-20 09:53:59 -06:00
musb_gadget.h usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes 2013-05-28 19:22:23 +03:00
musb_gadget_ep0.c usb: musb: gadget: read ep0 fifo only if rxcount is non zero 2013-04-02 11:42:50 +03:00
musb_host.c usb: patches for v3.15 2014-03-07 16:47:36 -08:00
musb_host.h usb: musb: fix prototype for musb_port_reset 2013-12-20 15:05:43 -06:00
musb_io.h usb: musb: use io{read,write}*_rep accessors 2012-12-17 17:15:13 -08:00
musb_regs.h usb: musb: tusb6010: fix compilation 2011-08-12 11:52:50 +03:00
musb_virthub.c usb: musb: correct use of schedule_delayed_work() 2014-02-20 09:17:24 -06:00
musbhsdma.c usb: musb: dma: merge ->start/stop into create/destroy 2013-07-29 13:53:18 +03:00
musbhsdma.h usb: musb: remove generic_interrupt 2012-11-06 15:32:13 +02:00
omap2430.c usb: musb: omap2430: make sure clocks are enabled when running mailbox 2014-04-15 12:08:02 -05:00
omap2430.h usb: start using the control module driver 2013-01-25 12:27:24 +02:00
tusb6010.c usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call. 2014-05-16 12:16:31 -05:00
tusb6010.h usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call. 2014-05-16 12:16:31 -05:00
tusb6010_omap.c usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call. 2014-05-16 12:16:31 -05:00
ux500.c usb: musb: ux500: don't propagate the OF node 2014-06-19 10:06:47 -05:00
ux500_dma.c usb: musb: ux500_dma: fix potential NULL dereference error 2013-12-17 13:17:42 -06:00