mirror of https://gitee.com/openkylin/linux.git
330 lines
7.9 KiB
C
330 lines
7.9 KiB
C
/*
|
|
* arch/arm/mach-at91/pm.c
|
|
* AT91 Power Management
|
|
*
|
|
* Copyright (C) 2005 David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <linux/atomic.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/cpu.h>
|
|
|
|
#include "generic.h"
|
|
#include "pm.h"
|
|
|
|
/*
|
|
* Show the reason for the previous system reset.
|
|
*/
|
|
#if defined(AT91_SHDWC)
|
|
|
|
#include <mach/at91_rstc.h>
|
|
#include <mach/at91_shdwc.h>
|
|
|
|
static void __init show_reset_status(void)
|
|
{
|
|
static char reset[] __initdata = "reset";
|
|
|
|
static char general[] __initdata = "general";
|
|
static char wakeup[] __initdata = "wakeup";
|
|
static char watchdog[] __initdata = "watchdog";
|
|
static char software[] __initdata = "software";
|
|
static char user[] __initdata = "user";
|
|
static char unknown[] __initdata = "unknown";
|
|
|
|
static char signal[] __initdata = "signal";
|
|
static char rtc[] __initdata = "rtc";
|
|
static char rtt[] __initdata = "rtt";
|
|
static char restore[] __initdata = "power-restored";
|
|
|
|
char *reason, *r2 = reset;
|
|
u32 reset_type, wake_type;
|
|
|
|
reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
|
|
wake_type = at91_sys_read(AT91_SHDW_SR);
|
|
|
|
switch (reset_type) {
|
|
case AT91_RSTC_RSTTYP_GENERAL:
|
|
reason = general;
|
|
break;
|
|
case AT91_RSTC_RSTTYP_WAKEUP:
|
|
/* board-specific code enabled the wakeup sources */
|
|
reason = wakeup;
|
|
|
|
/* "wakeup signal" */
|
|
if (wake_type & AT91_SHDW_WAKEUP0)
|
|
r2 = signal;
|
|
else {
|
|
r2 = reason;
|
|
if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */
|
|
reason = rtt;
|
|
else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */
|
|
reason = rtc;
|
|
else if (wake_type == 0) /* power-restored wakeup */
|
|
reason = restore;
|
|
else /* unknown wakeup */
|
|
reason = unknown;
|
|
}
|
|
break;
|
|
case AT91_RSTC_RSTTYP_WATCHDOG:
|
|
reason = watchdog;
|
|
break;
|
|
case AT91_RSTC_RSTTYP_SOFTWARE:
|
|
reason = software;
|
|
break;
|
|
case AT91_RSTC_RSTTYP_USER:
|
|
reason = user;
|
|
break;
|
|
default:
|
|
reason = unknown;
|
|
break;
|
|
}
|
|
pr_info("AT91: Starting after %s %s\n", reason, r2);
|
|
}
|
|
#else
|
|
static void __init show_reset_status(void) {}
|
|
#endif
|
|
|
|
|
|
static int at91_pm_valid_state(suspend_state_t state)
|
|
{
|
|
switch (state) {
|
|
case PM_SUSPEND_ON:
|
|
case PM_SUSPEND_STANDBY:
|
|
case PM_SUSPEND_MEM:
|
|
return 1;
|
|
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
|
|
static suspend_state_t target_state;
|
|
|
|
/*
|
|
* Called after processes are frozen, but before we shutdown devices.
|
|
*/
|
|
static int at91_pm_begin(suspend_state_t state)
|
|
{
|
|
target_state = state;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Verify that all the clocks are correct before entering
|
|
* slow-clock mode.
|
|
*/
|
|
static int at91_pm_verify_clocks(void)
|
|
{
|
|
unsigned long scsr;
|
|
int i;
|
|
|
|
scsr = at91_sys_read(AT91_PMC_SCSR);
|
|
|
|
/* USB must not be using PLLB */
|
|
if (cpu_is_at91rm9200()) {
|
|
if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
|
|
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
|
|
return 0;
|
|
}
|
|
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
|
|
|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
|
|
if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
|
|
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
|
|
return 0;
|
|
}
|
|
} else if (cpu_is_at91cap9()) {
|
|
if ((scsr & AT91CAP9_PMC_UHP) != 0) {
|
|
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
|
|
/* PCK0..PCK3 must be disabled, or configured to use clk32k */
|
|
for (i = 0; i < 4; i++) {
|
|
u32 css;
|
|
|
|
if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
|
|
continue;
|
|
|
|
css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
|
|
if (css != AT91_PMC_CSS_SLOW) {
|
|
pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
|
|
return 0;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Call this from platform driver suspend() to see how deeply to suspend.
|
|
* For example, some controllers (like OHCI) need one of the PLL clocks
|
|
* in order to act as a wakeup source, and those are not available when
|
|
* going into slow clock mode.
|
|
*
|
|
* REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
|
|
* the very same problem (but not using at91 main_clk), and it'd be better
|
|
* to add one generic API rather than lots of platform-specific ones.
|
|
*/
|
|
int at91_suspend_entering_slow_clock(void)
|
|
{
|
|
return (target_state == PM_SUSPEND_MEM);
|
|
}
|
|
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
|
|
|
|
|
|
static void (*slow_clock)(void);
|
|
|
|
#ifdef CONFIG_AT91_SLOW_CLOCK
|
|
extern void at91_slow_clock(void);
|
|
extern u32 at91_slow_clock_sz;
|
|
#endif
|
|
|
|
|
|
static int at91_pm_enter(suspend_state_t state)
|
|
{
|
|
u32 saved_lpr;
|
|
at91_gpio_suspend();
|
|
at91_irq_suspend();
|
|
|
|
pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
|
|
/* remember all the always-wake irqs */
|
|
(at91_sys_read(AT91_PMC_PCSR)
|
|
| (1 << AT91_ID_FIQ)
|
|
| (1 << AT91_ID_SYS)
|
|
| (at91_extern_irq))
|
|
& at91_sys_read(AT91_AIC_IMR),
|
|
state);
|
|
|
|
switch (state) {
|
|
/*
|
|
* Suspend-to-RAM is like STANDBY plus slow clock mode, so
|
|
* drivers must suspend more deeply: only the master clock
|
|
* controller may be using the main oscillator.
|
|
*/
|
|
case PM_SUSPEND_MEM:
|
|
/*
|
|
* Ensure that clocks are in a valid state.
|
|
*/
|
|
if (!at91_pm_verify_clocks())
|
|
goto error;
|
|
|
|
/*
|
|
* Enter slow clock mode by switching over to clk32k and
|
|
* turning off the main oscillator; reverse on wakeup.
|
|
*/
|
|
if (slow_clock) {
|
|
#ifdef CONFIG_AT91_SLOW_CLOCK
|
|
/* copy slow_clock handler to SRAM, and call it */
|
|
memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
|
|
#endif
|
|
slow_clock();
|
|
break;
|
|
} else {
|
|
pr_info("AT91: PM - no slow clock mode enabled ...\n");
|
|
/* FALLTHROUGH leaving master clock alone */
|
|
}
|
|
|
|
/*
|
|
* STANDBY mode has *all* drivers suspended; ignores irqs not
|
|
* marked as 'wakeup' event sources; and reduces DRAM power.
|
|
* But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
|
|
* nothing fancy done with main or cpu clocks.
|
|
*/
|
|
case PM_SUSPEND_STANDBY:
|
|
/*
|
|
* NOTE: the Wait-for-Interrupt instruction needs to be
|
|
* in icache so no SDRAM accesses are needed until the
|
|
* wakeup IRQ occurs and self-refresh is terminated.
|
|
* For ARM 926 based chips, this requirement is weaker
|
|
* as at91sam9 can access a RAM in self-refresh mode.
|
|
*/
|
|
asm volatile ( "mov r0, #0\n\t"
|
|
"b 1f\n\t"
|
|
".align 5\n\t"
|
|
"1: mcr p15, 0, r0, c7, c10, 4\n\t"
|
|
: /* no output */
|
|
: /* no input */
|
|
: "r0");
|
|
saved_lpr = sdram_selfrefresh_enable();
|
|
wait_for_interrupt_enable();
|
|
sdram_selfrefresh_disable(saved_lpr);
|
|
break;
|
|
|
|
case PM_SUSPEND_ON:
|
|
cpu_do_idle();
|
|
break;
|
|
|
|
default:
|
|
pr_debug("AT91: PM - bogus suspend state %d\n", state);
|
|
goto error;
|
|
}
|
|
|
|
pr_debug("AT91: PM - wakeup %08x\n",
|
|
at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
|
|
|
|
error:
|
|
target_state = PM_SUSPEND_ON;
|
|
at91_irq_resume();
|
|
at91_gpio_resume();
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called right prior to thawing processes.
|
|
*/
|
|
static void at91_pm_end(void)
|
|
{
|
|
target_state = PM_SUSPEND_ON;
|
|
}
|
|
|
|
|
|
static const struct platform_suspend_ops at91_pm_ops = {
|
|
.valid = at91_pm_valid_state,
|
|
.begin = at91_pm_begin,
|
|
.enter = at91_pm_enter,
|
|
.end = at91_pm_end,
|
|
};
|
|
|
|
static int __init at91_pm_init(void)
|
|
{
|
|
#ifdef CONFIG_AT91_SLOW_CLOCK
|
|
slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
|
|
#endif
|
|
|
|
pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
|
|
|
|
#ifdef CONFIG_ARCH_AT91RM9200
|
|
/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
|
|
at91_sys_write(AT91_SDRAMC_LPR, 0);
|
|
#endif
|
|
|
|
suspend_set_ops(&at91_pm_ops);
|
|
|
|
show_reset_status();
|
|
return 0;
|
|
}
|
|
arch_initcall(at91_pm_init);
|