linux/drivers/tty/serial
Mika Westerberg 6c55d9b983 serial: 8250_pci: Add Intel Broadwell ports
Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are
PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as
used on Intel Baytrail so we can reuse the existing Baytrail setup code.

Add both Broadwell LPSS UART ports to the list of supported devices.

Signed-off-by: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-29 08:15:33 -08:00
..
8250 serial: 8250_pci: Add Intel Broadwell ports 2016-01-29 08:15:33 -08:00
cpm_uart tty: serial: cpm_uart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
jsm serial/jsm: Deinline neo_parse_isr, save 688 bytes 2015-12-13 19:59:48 -08:00
21285.c
68328serial.c drivers: tty: 68328serial.c: Remove parentheses after return 2015-12-13 19:59:48 -08:00
Kconfig ARM: SoC driver updates for v4.5 2016-01-20 18:42:30 -08:00
Makefile serial: 8250: move of_serial code to 8250 directory 2015-12-13 19:59:48 -08:00
altera_jtaguart.c drivers/tty/serial: altera: fix typos in #endif comments 2015-05-06 22:26:58 +02:00
altera_uart.c serial: altera_uart: Use of_property_read_u32 instead of open-coding it 2015-10-04 17:47:49 +01:00
amba-pl010.c serial: Test/disable MSIs if switching from N_PPS 2014-11-06 14:57:27 -08:00
amba-pl011.c tty: amba-pl011: use iotype instead of access_32b to track 32-bit I/O 2016-01-06 21:02:45 -08:00
amba-pl011.h tty: amba-pl011: clean up LCR register offsets 2015-12-13 19:59:48 -08:00
apbuart.c tty: serial: apbuart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
apbuart.h
ar933x_uart.c serial: ar933x_uart: Fix off-by-one for checking valid alias id 2015-03-07 03:20:25 +01:00
arc_uart.c
atmel_serial.c drivers/tty/serial: delete unused MODULE_DEVICE_TABLE from atmel_serial.c 2016-01-08 21:12:19 -08:00
bcm63xx_uart.c serial/bcm63xx_uart: Deinline wait_for_xmitr, save 374 bytes 2015-12-13 19:59:48 -08:00
bfin_sport_uart.c tty: pr_warning->pr_warn and logging neatening 2014-11-25 17:06:38 -08:00
bfin_sport_uart.h
bfin_uart.c serial:bfin-uart:Remove 'struct timeval' 2015-12-13 19:59:48 -08:00
clps711x.c serial: mctrl-gpio: rename init function 2015-10-04 18:46:43 +01:00
crisv10.c tty: Remove tty_port::close_wait 2015-10-17 21:11:29 -07:00
crisv10.h cris: Remove obsolete ASYNC_SPLIT_TERMIOS behavior 2014-11-05 20:18:30 -08:00
digicolor-usart.c tty/serial: digicolor: remove sysrq reference 2015-02-02 10:11:25 -08:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon.c Merge 4.4-rc6 into tty-next 2015-12-21 11:06:07 -08:00
efm32-uart.c
etraxfs-uart.c serial: etraxfs-uart: Fix crash 2015-11-20 16:19:54 -08:00
fsl_lpuart.c serial: fsl_lpuart: add earlycon support 2015-10-17 21:18:30 -07:00
icom.c tty: Remove unused SERIAL_DO_RESTART define 2015-12-13 19:59:48 -08:00
icom.h
ifx6x60.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
ifx6x60.h
imx.c serial: imx: implement handshaking using gpios with the mctrl_gpio helper 2015-12-13 20:01:47 -08:00
ioc3_serial.c tty: ioc3_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ioc4_serial.c tty: ioc4_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ip22zilog.c serial: use container_of to resolve uart_ip22zilog_port from uart_port 2014-11-05 19:20:52 -08:00
ip22zilog.h
kgdb_nmi.c serial: kgdb_nmi: Use bool function return values of true/false not 1/0 2015-05-06 22:26:57 +02:00
kgdboc.c
lantiq.c drivers/tty: make serial/lantic.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: fix handling platform_get_irq result 2015-10-04 19:09:21 +01:00
m32r_sio.c serial/m32r_sio: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
m32r_sio.h
m32r_sio_reg.h
max310x.c gpio: change member .dev to .parent 2015-11-19 09:24:35 +01:00
max3100.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
mcf.c drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE 2015-05-06 22:26:59 +02:00
men_z135_uart.c serial/men_z135_uart: Deinline men_z135_reg_clr, save 176 bytes 2015-12-13 19:59:48 -08:00
meson_uart.c ARM: meson: serial: check for tx-irq enabled in irq code 2015-12-13 19:59:48 -08:00
mpc52xx_uart.c serial: mpc52xx: add delay after resetting transmitter to fix broken chars 2015-10-04 17:27:56 +01:00
mpsc.c tty: disable unbind for old 74xx based serial/mpsc console port 2015-10-17 21:18:30 -07:00
msm_serial.c tty: serial: msm: Remove 115.2 Kbps maximum baud rate limitation 2015-10-04 19:15:17 +01:00
msm_serial.h tty: serial: msm: Add RX DMA support 2015-10-04 19:15:17 +01:00
mux.c parisc: serial/mux: Convert to uart_console_device instead of open-coded 2015-10-22 15:44:28 +02:00
mxs-auart.c serial: mctrl-gpio: rename init function 2015-10-04 18:46:43 +01:00
netx-serial.c
omap-serial.c serial/omap-serial: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
pch_uart.c
pmac_zilog.c tty: constify of_device_id array 2015-03-26 22:49:10 +01:00
pmac_zilog.h
pnx8xxx_uart.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
pxa.c serial/pxa: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
rp2.c
sa1100.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
samsung.c serial: samsung: Fix UART status handling in DMA mode 2015-10-04 17:44:52 +01:00
samsung.h serial: samsung: fix DMA mode enter condition for small FIFO sizes 2015-08-04 22:07:23 -07:00
sb1250-duart.c
sc16is7xx.c GPIO bulk updates for the v4.5 kernel cycle: 2016-01-17 12:32:01 -08:00
sccnxp.c
serial-tegra.c serial: tegra: Add helper function for handling RX buffer 2015-10-17 21:07:57 -07:00
serial_core.c serial: support 16-bit register interface for console 2015-12-13 19:59:48 -08:00
serial_ks8695.c tty/serial: kill off set_irq_flags usage 2015-06-09 12:26:32 -07:00
serial_mctrl_gpio.c serial: mctrl_gpio: export mctrl_gpio_disable_ms and mctrl_gpio_init 2015-12-13 20:01:47 -08:00
serial_mctrl_gpio.h serial: fix mctrl helper functions 2015-10-17 21:21:07 -07:00
serial_txx9.c
sh-sci.c serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock 2016-01-07 21:08:05 -08:00
sh-sci.h serial: sh-sci: Add BRG register definitions 2015-12-17 11:18:44 +01:00
sirfsoc_uart.c serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sirfsoc_uart.h serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sn_console.c drivers/tty: make serial/sn_console.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sprd_serial.c serial/sprd_serial: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
st-asc.c tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND 2015-10-04 19:11:05 +01:00
stm32-usart.c tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND 2015-10-04 19:11:05 +01:00
suncore.c drivers/tty: make serial/suncore.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunhv.c tty/serial: Skip 'NULL' char after console break when sysrq enabled 2015-12-24 12:13:37 -05:00
sunsab.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
sunsab.h
sunsu.c serial/sunsu: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
sunzilog.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
sunzilog.h
tilegx.c
timbuart.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
timbuart.h
uartlite.c serial: xilinx: Use platform_get_irq to get irq description structure 2015-04-28 14:26:21 +02:00
ucc_uart.c QE: Move QE from arch/powerpc to drivers/soc 2015-12-22 17:12:56 -06:00
vr41xx_siu.c
vt8500_serial.c serial/vt8500_serial: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
xilinx_uartps.c serial: xuartps: add __init to earlycon write method 2015-05-10 19:10:08 +02:00
zs.c
zs.h